Linux ARM-MSM sub-architecture
 help / color / mirror / Atom feed
From: Lee Jones <lee@kernel.org>
To: Johan Hovold <johan+linaro@kernel.org>
Cc: Mark Brown <broonie@kernel.org>,
	Linus Walleij <linus.walleij@linaro.org>,
	Bjorn Andersson <andersson@kernel.org>,
	Konrad Dybcio <konrad.dybcio@linaro.org>,
	Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Liam Girdwood <lgirdwood@gmail.com>,
	Das Srinagesh <quic_gurus@quicinc.com>,
	Satya Priya Kakitapalli <quic_skakitap@quicinc.com>,
	Stephen Boyd <swboyd@chromium.org>,
	Bryan O'Donoghue <bryan.odonoghue@linaro.org>,
	Andy Shevchenko <andy.shevchenko@gmail.com>,
	linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux-gpio@vger.kernel.org
Subject: Re: [PATCH v2 02/14] mfd: pm8008: fix regmap irq chip initialisation
Date: Fri, 31 May 2024 18:03:53 +0100	[thread overview]
Message-ID: <20240531170353.GB1204315@google.com> (raw)
In-Reply-To: <20240529162958.18081-3-johan+linaro@kernel.org>

On Wed, 29 May 2024, Johan Hovold wrote:

> The regmap irq array is potentially shared between multiple PMICs and
> should only contain static data.
> 
> Use a custom macro to initialise also the type fields and drop the
> unnecessary updates on each probe.
> 
> Fixes: 6b149f3310a4 ("mfd: pm8008: Add driver for QCOM PM8008 PMIC")
> Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
> ---
>  drivers/mfd/qcom-pm8008.c | 64 ++++++++++++++-------------------------
>  1 file changed, 23 insertions(+), 41 deletions(-)
> 
> diff --git a/drivers/mfd/qcom-pm8008.c b/drivers/mfd/qcom-pm8008.c
> index 3ac3742f438b..f71c490f25c8 100644
> --- a/drivers/mfd/qcom-pm8008.c
> +++ b/drivers/mfd/qcom-pm8008.c
> @@ -56,15 +56,25 @@ static unsigned int pm8008_config_regs[] = {
>  	INT_POL_LOW_OFFSET,
>  };
>  
> -static struct regmap_irq pm8008_irqs[] = {
> -	REGMAP_IRQ_REG(PM8008_IRQ_MISC_UVLO,	PM8008_MISC,	BIT(0)),
> -	REGMAP_IRQ_REG(PM8008_IRQ_MISC_OVLO,	PM8008_MISC,	BIT(1)),
> -	REGMAP_IRQ_REG(PM8008_IRQ_MISC_OTST2,	PM8008_MISC,	BIT(2)),
> -	REGMAP_IRQ_REG(PM8008_IRQ_MISC_OTST3,	PM8008_MISC,	BIT(3)),
> -	REGMAP_IRQ_REG(PM8008_IRQ_MISC_LDO_OCP,	PM8008_MISC,	BIT(4)),
> -	REGMAP_IRQ_REG(PM8008_IRQ_TEMP_ALARM,	PM8008_TEMP_ALARM, BIT(0)),
> -	REGMAP_IRQ_REG(PM8008_IRQ_GPIO1,	PM8008_GPIO1,	BIT(0)),
> -	REGMAP_IRQ_REG(PM8008_IRQ_GPIO2,	PM8008_GPIO2,	BIT(0)),
> +#define _IRQ(_irq, _off, _mask, _types)			\
> +	[_irq] = {					\
> +		.reg_offset = (_off),			\
> +		.mask = (_mask),			\
> +		.type = {				\
> +			.type_reg_offset = (_off),	\
> +			.types_supported = (_types),	\
> +		},					\
> +	}

Any reason why this can't be generic and be tucked away somewhere in a
header file?

> +static const struct regmap_irq pm8008_irqs[] = {
> +	_IRQ(PM8008_IRQ_MISC_UVLO,    PM8008_MISC,	BIT(0), IRQ_TYPE_EDGE_RISING),
> +	_IRQ(PM8008_IRQ_MISC_OVLO,    PM8008_MISC,	BIT(1), IRQ_TYPE_EDGE_RISING),
> +	_IRQ(PM8008_IRQ_MISC_OTST2,   PM8008_MISC,	BIT(2), IRQ_TYPE_EDGE_RISING),
> +	_IRQ(PM8008_IRQ_MISC_OTST3,   PM8008_MISC,	BIT(3), IRQ_TYPE_EDGE_RISING),
> +	_IRQ(PM8008_IRQ_MISC_LDO_OCP, PM8008_MISC,	BIT(4), IRQ_TYPE_EDGE_RISING),
> +	_IRQ(PM8008_IRQ_TEMP_ALARM,   PM8008_TEMP_ALARM,BIT(0), IRQ_TYPE_SENSE_MASK),
> +	_IRQ(PM8008_IRQ_GPIO1,	      PM8008_GPIO1,	BIT(0), IRQ_TYPE_SENSE_MASK),
> +	_IRQ(PM8008_IRQ_GPIO2,	      PM8008_GPIO2,	BIT(0), IRQ_TYPE_SENSE_MASK),
>  };
>  
>  static const unsigned int pm8008_periph_base[] = {
> @@ -143,38 +153,9 @@ static struct regmap_config qcom_mfd_regmap_cfg = {
>  	.max_register	= 0xFFFF,
>  };
>  
> -static int pm8008_probe_irq_peripherals(struct device *dev,
> -					struct regmap *regmap,
> -					int client_irq)
> -{
> -	int rc, i;
> -	struct regmap_irq_type *type;
> -	struct regmap_irq_chip_data *irq_data;
> -
> -	for (i = 0; i < ARRAY_SIZE(pm8008_irqs); i++) {
> -		type = &pm8008_irqs[i].type;
> -
> -		type->type_reg_offset = pm8008_irqs[i].reg_offset;
> -
> -		if (type->type_reg_offset == PM8008_MISC)
> -			type->types_supported = IRQ_TYPE_EDGE_RISING;
> -		else
> -			type->types_supported = (IRQ_TYPE_EDGE_BOTH |
> -				IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW);
> -	}
> -
> -	rc = devm_regmap_add_irq_chip(dev, regmap, client_irq,
> -			IRQF_SHARED, 0, &pm8008_irq_chip, &irq_data);
> -	if (rc) {
> -		dev_err(dev, "Failed to add IRQ chip: %d\n", rc);
> -		return rc;
> -	}
> -
> -	return 0;
> -}
> -
>  static int pm8008_probe(struct i2c_client *client)
>  {
> +	struct regmap_irq_chip_data *irq_data;
>  	int rc;
>  	struct device *dev;
>  	struct regmap *regmap;
> @@ -187,9 +168,10 @@ static int pm8008_probe(struct i2c_client *client)
>  	i2c_set_clientdata(client, regmap);
>  
>  	if (of_property_read_bool(dev->of_node, "interrupt-controller")) {
> -		rc = pm8008_probe_irq_peripherals(dev, regmap, client->irq);
> +		rc = devm_regmap_add_irq_chip(dev, regmap, client->irq,
> +				IRQF_SHARED, 0, &pm8008_irq_chip, &irq_data);
>  		if (rc)
> -			dev_err(dev, "Failed to probe irq periphs: %d\n", rc);
> +			dev_err(dev, "failed to add IRQ chip: %d\n", rc);
>  	}
>  
>  	return devm_of_platform_populate(dev);
> -- 
> 2.44.1
> 

-- 
Lee Jones [李琼斯]

  parent reply	other threads:[~2024-05-31 17:04 UTC|newest]

Thread overview: 40+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-05-29 16:29 [PATCH v2 00/14] arm64: dts: qcom: sc8280xp-x13s: enable pm8008 camera pmic Johan Hovold
2024-05-29 16:29 ` [PATCH v2 01/14] dt-bindings: mfd: pm8008: add reset gpio Johan Hovold
2024-05-29 16:29 ` [PATCH v2 02/14] mfd: pm8008: fix regmap irq chip initialisation Johan Hovold
2024-05-31 16:22   ` Bryan O'Donoghue
2024-05-31 17:03   ` Lee Jones [this message]
2024-06-08 15:48     ` Johan Hovold
2024-05-29 16:29 ` [PATCH v2 03/14] mfd: pm8008: deassert reset on probe Johan Hovold
2024-05-29 19:45   ` Andy Shevchenko
2024-05-30  8:07     ` Johan Hovold
2024-05-30  8:34       ` Andy Shevchenko
2024-05-30  8:51         ` Johan Hovold
2024-05-29 16:29 ` [PATCH v2 04/14] mfd: pm8008: mark regmap structures as const Johan Hovold
2024-05-29 16:29 ` [PATCH v2 05/14] mfd: pm8008: use lower case hex notation Johan Hovold
2024-05-29 16:29 ` [PATCH v2 06/14] mfd: pm8008: rename irq chip Johan Hovold
2024-05-29 16:29 ` [PATCH v2 07/14] mfd: pm8008: drop unused driver data Johan Hovold
2024-05-29 16:29 ` [PATCH v2 08/14] pinctrl: qcom: spmi-gpio: drop broken pm8008 support Johan Hovold
2024-06-07 20:52   ` Linus Walleij
2024-05-29 16:29 ` [PATCH v2 09/14] dt-bindings: pinctrl: qcom,pmic-gpio: drop pm8008 Johan Hovold
2024-06-04 14:38   ` Rob Herring (Arm)
2024-06-07 20:53   ` Linus Walleij
2024-05-29 16:29 ` [PATCH v2 10/14] dt-bindings: mfd: pm8008: drop redundant descriptions Johan Hovold
2024-06-04 14:38   ` Rob Herring (Arm)
2024-05-29 16:29 ` [PATCH v2 11/14] dt-bindings: mfd: pm8008: rework binding Johan Hovold
2024-06-04 14:43   ` Rob Herring
2024-06-05  8:43   ` Dmitry Baryshkov
2024-06-08 15:36     ` Johan Hovold
2024-06-10 18:12       ` Dmitry Baryshkov
2024-05-29 16:29 ` [PATCH v2 12/14] mfd: pm8008: rework driver Johan Hovold
2024-05-29 19:53   ` Andy Shevchenko
2024-05-30  8:09     ` Johan Hovold
2024-05-31 17:08   ` Lee Jones
2024-05-31 18:44     ` Andy Shevchenko
2024-05-29 16:29 ` [PATCH v2 13/14] regulator: add pm8008 pmic regulator driver Johan Hovold
2024-05-29 20:02   ` Andy Shevchenko
2024-05-30  8:14     ` Johan Hovold
2024-05-30  8:46       ` Andy Shevchenko
2024-05-30  8:56         ` Johan Hovold
2024-05-30 11:59   ` Mark Brown
2024-05-29 16:29 ` [PATCH v2 14/14] arm64: dts: qcom: sc8280xp-x13s: enable pm8008 camera pmic Johan Hovold
2024-05-31 17:11 ` [PATCH v2 00/14] " Lee Jones

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240531170353.GB1204315@google.com \
    --to=lee@kernel.org \
    --cc=andersson@kernel.org \
    --cc=andy.shevchenko@gmail.com \
    --cc=broonie@kernel.org \
    --cc=bryan.odonoghue@linaro.org \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=johan+linaro@kernel.org \
    --cc=konrad.dybcio@linaro.org \
    --cc=krzk+dt@kernel.org \
    --cc=lgirdwood@gmail.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=quic_gurus@quicinc.com \
    --cc=quic_skakitap@quicinc.com \
    --cc=robh@kernel.org \
    --cc=swboyd@chromium.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox