From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
To: Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konradybcio@kernel.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>
Cc: linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Subject: [PATCH 1/2] arm64: dts: qcom: sm8750: Add Soundwire nodes
Date: Thu, 24 Apr 2025 11:40:52 +0200 [thread overview]
Message-ID: <20250424-sm8750-audio-part-2-v1-1-50133a0ec35f@linaro.org> (raw)
In-Reply-To: <20250424-sm8750-audio-part-2-v1-0-50133a0ec35f@linaro.org>
Add Soundwire controllers on SM8750, fully compatible with earlier
SM8650 generation.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
arch/arm64/boot/dts/qcom/sm8750.dtsi | 122 +++++++++++++++++++++++++++++++++++
1 file changed, 122 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm8750.dtsi b/arch/arm64/boot/dts/qcom/sm8750.dtsi
index 149d2ed17641a085d510f3a8eab5a96304787f0c..1e7aa25c675e76ce6aa571e04d7117b8c2ab25f8 100644
--- a/arch/arm64/boot/dts/qcom/sm8750.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8750.dtsi
@@ -2257,6 +2257,36 @@ lpass_wsa2macro: codec@6aa0000 {
#sound-dai-cells = <1>;
};
+ swr3: soundwire@6ab0000 {
+ compatible = "qcom,soundwire-v2.0.0";
+ reg = <0 0x06ab0000 0 0x10000>;
+ interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&lpass_wsa2macro>;
+ clock-names = "iface";
+ label = "WSA2";
+
+ pinctrl-0 = <&wsa2_swr_active>;
+ pinctrl-names = "default";
+
+ qcom,din-ports = <4>;
+ qcom,dout-ports = <9>;
+
+ qcom,ports-sinterval = /bits/ 16 <0x07 0x1f 0x3f 0x07 0x1f 0x3f 0x18f 0x18f 0x18f 0x0f 0x0f 0xff 0x31f>;
+ qcom,ports-offset1 = /bits/ 8 <0x01 0x03 0x05 0x02 0x04 0x15 0x00 0x00 0x00 0x06 0x0d 0xff 0x00>;
+ qcom,ports-offset2 = /bits/ 8 <0xff 0x07 0x1f 0xff 0x07 0x1f 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+ qcom,ports-hstart = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0x0e 0x0e 0xff 0xff 0xff 0x0f>;
+ qcom,ports-hstop = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0x0e 0x0e 0xff 0xff 0xff 0x0f>;
+ qcom,ports-word-length = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0x0f 0x0f 0x00 0xff 0xff 0x18>;
+ qcom,ports-block-pack-mode = /bits/ 8 <0x00 0x01 0x01 0x00 0x01 0x01 0x00 0x01 0x01 0x01 0x01 0x00 0x00>;
+ qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0x00 0x00 0xff 0xff 0xff 0xff>;
+ qcom,ports-lane-control = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0x00 0x00 0xff 0xff 0xff 0xff>;
+
+ #address-cells = <2>;
+ #size-cells = <0>;
+ #sound-dai-cells = <1>;
+ status = "disabled";
+ };
+
lpass_rxmacro: codec@6ac0000 {
compatible = "qcom,sm8750-lpass-rx-macro", "qcom,sm8550-lpass-rx-macro";
reg = <0x0 0x06ac0000 0x0 0x1000>;
@@ -2274,6 +2304,36 @@ lpass_rxmacro: codec@6ac0000 {
#sound-dai-cells = <1>;
};
+ swr1: soundwire@6ad0000 {
+ compatible = "qcom,soundwire-v2.0.0";
+ reg = <0 0x06ad0000 0 0x10000>;
+ interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&lpass_rxmacro>;
+ clock-names = "iface";
+ label = "RX";
+
+ pinctrl-0 = <&rx_swr_active>;
+ pinctrl-names = "default";
+
+ qcom,din-ports = <1>;
+ qcom,dout-ports = <11>;
+
+ qcom,ports-sinterval = /bits/ 16 <0x03 0x3f 0x1f 0x07 0x00 0x18f 0xff 0xff 0x31 0xff 0xff 0xff>;
+ qcom,ports-offset1 = /bits/ 8 <0x00 0x00 0x0b 0x01 0x00 0x00 0xff 0xff 0x00 0xff 0xff 0xff>;
+ qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x0b 0x00 0x00 0x00 0xff 0xff 0x00 0xff 0xff 0xff>;
+ qcom,ports-hstart = /bits/ 8 <0xff 0x03 0xff 0xff 0xff 0x08 0xff 0xff 0x00 0xff 0xff 0xff>;
+ qcom,ports-hstop = /bits/ 8 <0xff 0x06 0xff 0xff 0xff 0x08 0xff 0xff 0x0f 0xff 0xff 0xff>;
+ qcom,ports-word-length = /bits/ 8 <0x01 0x07 0x04 0xff 0xff 0x0f 0xff 0xff 0x18 0xff 0xff 0xff>;
+ qcom,ports-block-pack-mode = /bits/ 8 <0xff 0x00 0x01 0xff 0xff 0x00 0xff 0xff 0x01 0xff 0xff 0xff>;
+ qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff 0x00 0x00 0xff 0xff 0x00 0xff 0xff 0xff>;
+ qcom,ports-lane-control = /bits/ 8 <0x01 0x00 0x00 0x00 0x00 0x00 0xff 0xff 0x01 0xff 0xff 0xff>;
+
+ #address-cells = <2>;
+ #size-cells = <0>;
+ #sound-dai-cells = <1>;
+ status = "disabled";
+ };
+
lpass_txmacro: codec@6ae0000 {
compatible = "qcom,sm8750-lpass-tx-macro", "qcom,sm8550-lpass-tx-macro";
reg = <0x0 0x06ae0000 0x0 0x1000>;
@@ -2308,6 +2368,36 @@ lpass_wsamacro: codec@6b00000 {
#sound-dai-cells = <1>;
};
+ swr0: soundwire@6b10000 {
+ compatible = "qcom,soundwire-v2.0.0";
+ reg = <0 0x06b10000 0 0x10000>;
+ interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&lpass_wsamacro>;
+ clock-names = "iface";
+ label = "WSA";
+
+ pinctrl-0 = <&wsa_swr_active>;
+ pinctrl-names = "default";
+
+ qcom,din-ports = <4>;
+ qcom,dout-ports = <9>;
+
+ qcom,ports-sinterval = /bits/ 16 <0x07 0x1f 0x3f 0x07 0x1f 0x3f 0x18f 0x18f 0x18f 0x0f 0x0f 0xff 0x31f>;
+ qcom,ports-offset1 = /bits/ 8 <0x01 0x03 0x05 0x02 0x04 0x15 0x00 0x00 0x00 0x06 0x0d 0xff 0x00>;
+ qcom,ports-offset2 = /bits/ 8 <0xff 0x07 0x1f 0xff 0x07 0x1f 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+ qcom,ports-hstart = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0x0e 0x0e 0xff 0xff 0xff 0x0f>;
+ qcom,ports-hstop = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0x0e 0x0e 0xff 0xff 0xff 0x0f>;
+ qcom,ports-word-length = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0x0f 0x0f 0x00 0xff 0xff 0x18>;
+ qcom,ports-block-pack-mode = /bits/ 8 <0x00 0x01 0x01 0x00 0x01 0x01 0x00 0x01 0x01 0x01 0x01 0x00 0x00>;
+ qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0x00 0x00 0xff 0xff 0xff 0xff>;
+ qcom,ports-lane-control = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0x00 0x00 0xff 0xff 0xff 0xff>;
+
+ #address-cells = <2>;
+ #size-cells = <0>;
+ #sound-dai-cells = <1>;
+ status = "disabled";
+ };
+
lpass_ag_noc: interconnect@7e40000 {
compatible = "qcom,sm8750-lpass-ag-noc";
reg = <0x0 0x07e40000 0x0 0xe080>;
@@ -2329,6 +2419,38 @@ lpass_lpicx_noc: interconnect@7420000 {
#interconnect-cells = <2>;
};
+ swr2: soundwire@7630000 {
+ compatible = "qcom,soundwire-v2.0.0";
+ reg = <0 0x07630000 0 0x10000>;
+ interrupts = <GIC_SPI 761 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 785 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "core", "wakeup";
+ clocks = <&lpass_txmacro>;
+ clock-names = "iface";
+ label = "TX";
+
+ pinctrl-0 = <&tx_swr_active>;
+ pinctrl-names = "default";
+
+ qcom,din-ports = <4>;
+ qcom,dout-ports = <0>;
+
+ qcom,ports-sinterval-low = /bits/ 8 <0x01 0x01 0x03 0x03>;
+ qcom,ports-offset1 = /bits/ 8 <0x00 0x00 0x01 0x01>;
+ qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x00 0x00>;
+ qcom,ports-hstart = /bits/ 8 <0xff 0xff 0xff 0xff>;
+ qcom,ports-hstop = /bits/ 8 <0xff 0xff 0xff 0xff>;
+ qcom,ports-word-length = /bits/ 8 <0xff 0xff 0xff 0xff>;
+ qcom,ports-block-pack-mode = /bits/ 8 <0xff 0xff 0xff 0xff>;
+ qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff>;
+ qcom,ports-lane-control = /bits/ 8 <0x01 0x02 0x00 0x00>;
+
+ #address-cells = <2>;
+ #size-cells = <0>;
+ #sound-dai-cells = <1>;
+ status = "disabled";
+ };
+
lpass_vamacro: codec@7660000 {
compatible = "qcom,sm8750-lpass-va-macro", "qcom,sm8550-lpass-va-macro";
reg = <0x0 0x07660000 0x0 0x2000>;
--
2.45.2
next prev parent reply other threads:[~2025-04-24 9:41 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-04-24 9:40 [PATCH 0/2] arm64: dts: qcom: sm8750: Add sound Krzysztof Kozlowski
2025-04-24 9:40 ` Krzysztof Kozlowski [this message]
2025-04-25 9:24 ` [PATCH 1/2] arm64: dts: qcom: sm8750: Add Soundwire nodes Konrad Dybcio
2025-05-08 10:37 ` Krzysztof Kozlowski
2025-05-12 19:38 ` Konrad Dybcio
2025-05-13 8:26 ` Krzysztof Kozlowski
2025-05-16 11:36 ` Konrad Dybcio
2025-05-16 21:46 ` Dmitry Baryshkov
2025-04-24 9:40 ` [PATCH 2/2] arm64: dts: qcom: sm8750-mtp: Add sound (speakers, headset codec, dmics) Krzysztof Kozlowski
2025-04-25 9:30 ` Konrad Dybcio
2025-04-28 14:41 ` Krzysztof Kozlowski
2025-04-29 19:11 ` Konrad Dybcio
2025-04-30 6:19 ` Krzysztof Kozlowski
2025-04-30 10:48 ` Konrad Dybcio
2025-04-30 11:07 ` neil.armstrong
2025-04-30 11:17 ` Konrad Dybcio
2025-04-30 11:18 ` Krzysztof Kozlowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250424-sm8750-audio-part-2-v1-1-50133a0ec35f@linaro.org \
--to=krzysztof.kozlowski@linaro.org \
--cc=andersson@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=konradybcio@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).