From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
To: Abhinav Kumar <quic_abhinavk@quicinc.com>,
Sean Paul <sean@poorly.run>,
Marijn Suijten <marijn.suijten@somainline.org>,
David Airlie <airlied@gmail.com>,
Simona Vetter <simona@ffwll.ch>,
Maarten Lankhorst <maarten.lankhorst@linux.intel.com>,
Maxime Ripard <mripard@kernel.org>,
Thomas Zimmermann <tzimmermann@suse.de>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Krishna Manikandan <quic_mkrishn@quicinc.com>,
Jonathan Marek <jonathan@marek.ca>,
Kuogee Hsieh <quic_khsieh@quicinc.com>,
Neil Armstrong <neil.armstrong@linaro.org>,
Dmitry Baryshkov <lumag@kernel.org>,
Bjorn Andersson <andersson@kernel.org>,
Michael Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@kernel.org>,
Rob Clark <robin.clark@oss.qualcomm.com>
Cc: linux-arm-msm@vger.kernel.org, dri-devel@lists.freedesktop.org,
freedreno@lists.freedesktop.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>,
linux-clk@vger.kernel.org, Abel Vesa <abel.vesa@linaro.org>,
Srinivas Kandagatla <srini@kernel.org>,
Rob Clark <robin.clark@oss.qualcomm.com>
Subject: [PATCH v6 05/17] dt-bindings: display/msm: qcom,sm8750-mdss: Add SM8750
Date: Tue, 10 Jun 2025 16:05:43 +0200 [thread overview]
Message-ID: <20250610-b4-sm8750-display-v6-5-ee633e3ddbff@linaro.org> (raw)
In-Reply-To: <20250610-b4-sm8750-display-v6-0-ee633e3ddbff@linaro.org>
Add MDSS/MDP display subsystem for Qualcomm SM8750 SoC, next generation
with two revisions up of the IP block comparing to SM8650.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
Changes in v3:
1. Properly described interconnects
2. Use only one compatible and contains for the sub-blocks (Rob)
---
.../bindings/display/msm/qcom,sm8750-mdss.yaml | 470 +++++++++++++++++++++
1 file changed, 470 insertions(+)
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8750-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8750-mdss.yaml
new file mode 100644
index 0000000000000000000000000000000000000000..72c70edc1fb01c61f8aad24fdb58bfb4f62a6e34
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8750-mdss.yaml
@@ -0,0 +1,470 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sm8750-mdss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM8750 Display MDSS
+
+maintainers:
+ - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+description:
+ SM8650 MSM Mobile Display Subsystem(MDSS), which encapsulates sub-blocks like
+ DPU display controller, DSI and DP interfaces etc.
+
+$ref: /schemas/display/msm/mdss-common.yaml#
+
+properties:
+ compatible:
+ const: qcom,sm8750-mdss
+
+ clocks:
+ items:
+ - description: Display AHB
+ - description: Display hf AXI
+ - description: Display core
+
+ iommus:
+ maxItems: 1
+
+ interconnects:
+ items:
+ - description: Interconnect path from mdp0 port to the data bus
+ - description: Interconnect path from CPU to the reg bus
+
+ interconnect-names:
+ items:
+ - const: mdp0-mem
+ - const: cpu-cfg
+
+patternProperties:
+ "^display-controller@[0-9a-f]+$":
+ type: object
+ additionalProperties: true
+ properties:
+ compatible:
+ const: qcom,sm8750-dpu
+
+ "^displayport-controller@[0-9a-f]+$":
+ type: object
+ additionalProperties: true
+ properties:
+ compatible:
+ contains:
+ const: qcom,sm8750-dp
+
+ "^dsi@[0-9a-f]+$":
+ type: object
+ additionalProperties: true
+ properties:
+ compatible:
+ contains:
+ const: qcom,sm8750-dsi-ctrl
+
+ "^phy@[0-9a-f]+$":
+ type: object
+ additionalProperties: true
+ properties:
+ compatible:
+ const: qcom,sm8750-dsi-phy-3nm
+
+required:
+ - compatible
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,rpmh.h>
+ #include <dt-bindings/interconnect/qcom,icc.h>
+ #include <dt-bindings/interconnect/qcom,sm8750-rpmh.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/phy/phy-qcom-qmp.h>
+ #include <dt-bindings/power/qcom,rpmhpd.h>
+
+ display-subsystem@ae00000 {
+ compatible = "qcom,sm8750-mdss";
+ reg = <0x0ae00000 0x1000>;
+ reg-names = "mdss";
+
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&disp_cc_mdss_ahb_clk>,
+ <&gcc_disp_hf_axi_clk>,
+ <&disp_cc_mdss_mdp_clk>;
+
+ interconnects = <&mmss_noc MASTER_MDP QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+ &config_noc SLAVE_DISPLAY_CFG QCOM_ICC_TAG_ACTIVE_ONLY>;
+ interconnect-names = "mdp0-mem",
+ "cpu-cfg";
+
+ resets = <&disp_cc_mdss_core_bcr>;
+
+ power-domains = <&mdss_gdsc>;
+
+ iommus = <&apps_smmu 0x800 0x2>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ display-controller@ae01000 {
+ compatible = "qcom,sm8750-dpu";
+ reg = <0x0ae01000 0x93000>,
+ <0x0aeb0000 0x2008>;
+ reg-names = "mdp",
+ "vbif";
+
+ interrupts-extended = <&mdss 0>;
+
+ clocks = <&gcc_disp_hf_axi_clk>,
+ <&disp_cc_mdss_ahb_clk>,
+ <&disp_cc_mdss_mdp_lut_clk>,
+ <&disp_cc_mdss_mdp_clk>,
+ <&disp_cc_mdss_vsync_clk>;
+ clock-names = "nrt_bus",
+ "iface",
+ "lut",
+ "core",
+ "vsync";
+
+ assigned-clocks = <&disp_cc_mdss_vsync_clk>;
+ assigned-clock-rates = <19200000>;
+
+ operating-points-v2 = <&mdp_opp_table>;
+
+ power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ dpu_intf1_out: endpoint {
+ remote-endpoint = <&mdss_dsi0_in>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ dpu_intf2_out: endpoint {
+ remote-endpoint = <&mdss_dsi1_in>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+
+ dpu_intf0_out: endpoint {
+ remote-endpoint = <&mdss_dp0_in>;
+ };
+ };
+ };
+
+ mdp_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-207000000 {
+ opp-hz = /bits/ 64 <207000000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-337000000 {
+ opp-hz = /bits/ 64 <337000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+
+ opp-417000000 {
+ opp-hz = /bits/ 64 <417000000>;
+ required-opps = <&rpmhpd_opp_svs_l1>;
+ };
+
+ opp-532000000 {
+ opp-hz = /bits/ 64 <532000000>;
+ required-opps = <&rpmhpd_opp_nom>;
+ };
+
+ opp-575000000 {
+ opp-hz = /bits/ 64 <575000000>;
+ required-opps = <&rpmhpd_opp_nom_l1>;
+ };
+ };
+ };
+
+ dsi@ae94000 {
+ compatible = "qcom,sm8750-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+ reg = <0x0ae94000 0x400>;
+ reg-names = "dsi_ctrl";
+
+ interrupts-extended = <&mdss 4>;
+
+ clocks = <&disp_cc_mdss_byte0_clk>,
+ <&disp_cc_mdss_byte0_intf_clk>,
+ <&disp_cc_mdss_pclk0_clk>,
+ <&disp_cc_mdss_esc0_clk>,
+ <&disp_cc_mdss_ahb_clk>,
+ <&gcc_disp_hf_axi_clk>,
+ <&mdss_dsi0_phy 1>,
+ <&mdss_dsi0_phy 0>,
+ <&disp_cc_esync0_clk>,
+ <&disp_cc_osc_clk>,
+ <&disp_cc_mdss_byte0_clk_src>,
+ <&disp_cc_mdss_pclk0_clk_src>;
+ clock-names = "byte",
+ "byte_intf",
+ "pixel",
+ "core",
+ "iface",
+ "bus",
+ "dsi_pll_pixel",
+ "dsi_pll_byte",
+ "esync",
+ "osc",
+ "byte_src",
+ "pixel_src";
+
+ operating-points-v2 = <&mdss_dsi_opp_table>;
+
+ power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+ phys = <&mdss_dsi0_phy>;
+ phy-names = "dsi";
+
+ vdda-supply = <&vreg_l3g_1p2>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ mdss_dsi0_in: endpoint {
+ remote-endpoint = <&dpu_intf1_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ mdss_dsi0_out: endpoint {
+ remote-endpoint = <&panel0_in>;
+ data-lanes = <0 1 2 3>;
+ };
+ };
+ };
+
+ mdss_dsi_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-187500000 {
+ opp-hz = /bits/ 64 <187500000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-300000000 {
+ opp-hz = /bits/ 64 <300000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+
+ opp-358000000 {
+ opp-hz = /bits/ 64 <358000000>;
+ required-opps = <&rpmhpd_opp_svs_l1>;
+ };
+ };
+ };
+
+ mdss_dsi0_phy: phy@ae95000 {
+ compatible = "qcom,sm8750-dsi-phy-3nm";
+ reg = <0x0ae95000 0x200>,
+ <0x0ae95200 0x280>,
+ <0x0ae95500 0x400>;
+ reg-names = "dsi_phy",
+ "dsi_phy_lane",
+ "dsi_pll";
+
+ clocks = <&disp_cc_mdss_ahb_clk>,
+ <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "iface",
+ "ref";
+
+ vdds-supply = <&vreg_l3i_0p88>;
+
+ #clock-cells = <1>;
+ #phy-cells = <0>;
+ };
+
+ dsi@ae96000 {
+ compatible = "qcom,sm8750-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+ reg = <0x0ae96000 0x400>;
+ reg-names = "dsi_ctrl";
+
+ interrupts-extended = <&mdss 5>;
+
+ clocks = <&disp_cc_mdss_byte1_clk>,
+ <&disp_cc_mdss_byte1_intf_clk>,
+ <&disp_cc_mdss_pclk1_clk>,
+ <&disp_cc_mdss_esc1_clk>,
+ <&disp_cc_mdss_ahb_clk>,
+ <&gcc_disp_hf_axi_clk>,
+ <&mdss_dsi1_phy 1>,
+ <&mdss_dsi1_phy 0>,
+ <&disp_cc_esync1_clk>,
+ <&disp_cc_osc_clk>,
+ <&disp_cc_mdss_byte1_clk_src>,
+ <&disp_cc_mdss_pclk1_clk_src>;
+ clock-names = "byte",
+ "byte_intf",
+ "pixel",
+ "core",
+ "iface",
+ "bus",
+ "dsi_pll_pixel",
+ "dsi_pll_byte",
+ "esync",
+ "osc",
+ "byte_src",
+ "pixel_src";
+
+ operating-points-v2 = <&mdss_dsi_opp_table>;
+
+ power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+ phys = <&mdss_dsi1_phy>;
+ phy-names = "dsi";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ mdss_dsi1_in: endpoint {
+ remote-endpoint = <&dpu_intf2_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ mdss_dsi1_out: endpoint {
+ };
+ };
+ };
+ };
+
+ mdss_dsi1_phy: phy@ae97000 {
+ compatible = "qcom,sm8750-dsi-phy-3nm";
+ reg = <0x0ae97000 0x200>,
+ <0x0ae97200 0x280>,
+ <0x0ae97500 0x400>;
+ reg-names = "dsi_phy",
+ "dsi_phy_lane",
+ "dsi_pll";
+
+ clocks = <&disp_cc_mdss_ahb_clk>,
+ <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "iface",
+ "ref";
+
+ #clock-cells = <1>;
+ #phy-cells = <0>;
+ };
+
+ displayport-controller@af54000 {
+ compatible = "qcom,sm8750-dp", "qcom,sm8650-dp";
+ reg = <0xaf54000 0x104>,
+ <0xaf54200 0xc0>,
+ <0xaf55000 0x770>,
+ <0xaf56000 0x9c>,
+ <0xaf57000 0x9c>;
+
+ interrupts-extended = <&mdss 12>;
+
+ clocks = <&disp_cc_mdss_ahb_clk>,
+ <&disp_cc_mdss_dptx0_aux_clk>,
+ <&disp_cc_mdss_dptx0_link_clk>,
+ <&disp_cc_mdss_dptx0_link_intf_clk>,
+ <&disp_cc_mdss_dptx0_pixel0_clk>;
+ clock-names = "core_iface",
+ "core_aux",
+ "ctrl_link",
+ "ctrl_link_iface",
+ "stream_pixel";
+
+ assigned-clocks = <&disp_cc_mdss_dptx0_link_clk_src>,
+ <&disp_cc_mdss_dptx0_pixel0_clk_src>;
+ assigned-clock-parents = <&usb_dp_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+ <&usb_dp_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
+
+ operating-points-v2 = <&dp_opp_table>;
+
+ power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+ phys = <&usb_dp_qmpphy QMP_USB43DP_DP_PHY>;
+ phy-names = "dp";
+
+ #sound-dai-cells = <0>;
+
+ dp_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-192000000 {
+ opp-hz = /bits/ 64 <192000000>;
+ required-opps = <&rpmhpd_opp_low_svs_d1>;
+ };
+
+ opp-270000000 {
+ opp-hz = /bits/ 64 <270000000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-540000000 {
+ opp-hz = /bits/ 64 <540000000>;
+ required-opps = <&rpmhpd_opp_svs_l1>;
+ };
+
+ opp-810000000 {
+ opp-hz = /bits/ 64 <810000000>;
+ required-opps = <&rpmhpd_opp_nom>;
+ };
+ };
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ mdss_dp0_in: endpoint {
+ remote-endpoint = <&dpu_intf0_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ mdss_dp0_out: endpoint {
+ remote-endpoint = <&usb_dp_qmpphy_dp_in>;
+ };
+ };
+ };
+ };
+ };
--
2.45.2
next prev parent reply other threads:[~2025-06-10 14:06 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-06-10 14:05 [PATCH v6 00/17] drm/msm: Add support for SM8750 Krzysztof Kozlowski
2025-06-10 14:05 ` [PATCH v6 01/17] dt-bindings: display/msm: dsi-phy-7nm: Add SM8750 Krzysztof Kozlowski
2025-06-10 14:05 ` [PATCH v6 02/17] dt-bindings: display/msm: dsi-controller-main: " Krzysztof Kozlowski
2025-06-10 14:05 ` [PATCH v6 03/17] dt-bindings: display/msm: dp-controller: " Krzysztof Kozlowski
2025-06-10 14:05 ` [PATCH v6 04/17] dt-bindings: display/msm: qcom,sm8650-dpu: " Krzysztof Kozlowski
2025-06-10 14:05 ` Krzysztof Kozlowski [this message]
2025-06-10 14:05 ` [PATCH v6 06/17] drm/msm/dsi/phy: Toggle back buffer resync after preparing PLL Krzysztof Kozlowski
2025-08-13 18:25 ` Krzysztof Kozlowski
2025-06-10 14:05 ` [PATCH v6 07/17] drm/msm/dsi/phy: Define PHY_CMN_CTRL_0 bitfields Krzysztof Kozlowski
2025-06-10 22:23 ` Dmitry Baryshkov
2025-06-10 14:05 ` [PATCH v6 08/17] drm/msm/dsi/phy: Fix reading zero as PLL rates when unprepared Krzysztof Kozlowski
2025-06-13 13:55 ` Dmitry Baryshkov
2025-06-13 14:02 ` Krzysztof Kozlowski
2025-06-13 14:04 ` Dmitry Baryshkov
2025-06-18 8:28 ` Krzysztof Kozlowski
2025-06-18 13:07 ` Dmitry Baryshkov
2025-06-18 13:34 ` Krzysztof Kozlowski
2025-06-18 13:35 ` Krzysztof Kozlowski
2025-06-18 13:39 ` Dmitry Baryshkov
2025-06-18 13:54 ` Krzysztof Kozlowski
2025-06-18 13:58 ` Dmitry Baryshkov
2025-06-18 14:01 ` Krzysztof Kozlowski
2025-06-10 14:05 ` [PATCH v6 09/17] drm/msm/dsi/phy_7nm: Fix missing initial VCO rate Krzysztof Kozlowski
2025-06-10 14:05 ` [PATCH v6 10/17] drm/msm/dsi/phy: Add support for SM8750 Krzysztof Kozlowski
2025-06-10 14:05 ` [PATCH v6 11/17] drm/msm/dsi: " Krzysztof Kozlowski
2025-06-10 22:25 ` Dmitry Baryshkov
2025-06-10 14:05 ` [PATCH v6 12/17] drm/msm/dpu: " Krzysztof Kozlowski
2025-06-10 14:05 ` [PATCH v6 13/17] drm/msm/dpu: Consistently use u32 instead of uint32_t Krzysztof Kozlowski
2025-06-10 14:10 ` Neil Armstrong
2025-06-10 22:25 ` Dmitry Baryshkov
2025-06-10 14:05 ` [PATCH v6 14/17] drm/msm/dpu: Implement 10-bit color alpha for v12.0 DPU Krzysztof Kozlowski
2025-06-10 14:10 ` Neil Armstrong
2025-06-11 6:21 ` Krzysztof Kozlowski
2025-06-10 14:05 ` [PATCH v6 15/17] drm/msm/dpu: Implement CTL_PIPE_ACTIVE " Krzysztof Kozlowski
2025-06-10 14:05 ` [PATCH v6 16/17] drm/msm/dpu: Implement LM crossbar " Krzysztof Kozlowski
2025-06-10 14:05 ` [PATCH v6 17/17] drm/msm/mdss: Add support for SM8750 Krzysztof Kozlowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250610-b4-sm8750-display-v6-5-ee633e3ddbff@linaro.org \
--to=krzysztof.kozlowski@linaro.org \
--cc=abel.vesa@linaro.org \
--cc=airlied@gmail.com \
--cc=andersson@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=freedreno@lists.freedesktop.org \
--cc=jonathan@marek.ca \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=lumag@kernel.org \
--cc=maarten.lankhorst@linux.intel.com \
--cc=marijn.suijten@somainline.org \
--cc=mripard@kernel.org \
--cc=mturquette@baylibre.com \
--cc=neil.armstrong@linaro.org \
--cc=quic_abhinavk@quicinc.com \
--cc=quic_khsieh@quicinc.com \
--cc=quic_mkrishn@quicinc.com \
--cc=robh@kernel.org \
--cc=robin.clark@oss.qualcomm.com \
--cc=sboyd@kernel.org \
--cc=sean@poorly.run \
--cc=simona@ffwll.ch \
--cc=srini@kernel.org \
--cc=tzimmermann@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).