* [PATCH v8 1/4] dt-bindings: arm: qcom: Add Lenovo TB16 support
2025-06-30 19:06 [PATCH v8 0/4] arm64: dts: qcom: Add Lenovo ThinkBook 16 device tree Jens Glathe via B4 Relay
@ 2025-06-30 19:06 ` Jens Glathe via B4 Relay
2025-06-30 19:06 ` [PATCH v8 2/4] usb: misc: onboard_usb_dev: Add Bison Electronics Inc. Integrated Camera Jens Glathe via B4 Relay
` (3 subsequent siblings)
4 siblings, 0 replies; 6+ messages in thread
From: Jens Glathe via B4 Relay @ 2025-06-30 19:06 UTC (permalink / raw)
To: Bjorn Andersson, Konrad Dybcio, Rob Herring, Krzysztof Kozlowski,
Conor Dooley, Matthias Kaehlcke, Greg Kroah-Hartman
Cc: Aleksandrs Vinarskis, linux-arm-msm, devicetree, linux-kernel,
linux-usb, Jens Glathe
From: Jens Glathe <jens.glathe@oldschoolsolutions.biz>
Document the x1p-42-100/x1-26-100 variants of the Thinkbook 16 G7 QOY.
[1]: https://psref.lenovo.com/syspool/Sys/PDF/ThinkBook/ThinkBook_16_G7_QOY/ThinkBook_16_G7_QOY_Spec.pdf
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Jens Glathe <jens.glathe@oldschoolsolutions.biz>
---
Documentation/devicetree/bindings/arm/qcom.yaml | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml
index ae43b35565808ed27cd8354b9a342545c4a98ed6..98f8ae80feccf23b79ba7e7b04d4f6a291e37a44 100644
--- a/Documentation/devicetree/bindings/arm/qcom.yaml
+++ b/Documentation/devicetree/bindings/arm/qcom.yaml
@@ -1159,6 +1159,7 @@ properties:
- items:
- enum:
- asus,zenbook-a14-ux3407qa
+ - lenovo,thinkbook-16
- qcom,x1p42100-crd
- const: qcom,x1p42100
--
2.48.1
^ permalink raw reply related [flat|nested] 6+ messages in thread* [PATCH v8 2/4] usb: misc: onboard_usb_dev: Add Bison Electronics Inc. Integrated Camera
2025-06-30 19:06 [PATCH v8 0/4] arm64: dts: qcom: Add Lenovo ThinkBook 16 device tree Jens Glathe via B4 Relay
2025-06-30 19:06 ` [PATCH v8 1/4] dt-bindings: arm: qcom: Add Lenovo TB16 support Jens Glathe via B4 Relay
@ 2025-06-30 19:06 ` Jens Glathe via B4 Relay
2025-06-30 19:06 ` [PATCH v8 3/4] firmware: qcom: scm: Allow QSEECOM on Lenovo Thinkbook 16 Jens Glathe via B4 Relay
` (2 subsequent siblings)
4 siblings, 0 replies; 6+ messages in thread
From: Jens Glathe via B4 Relay @ 2025-06-30 19:06 UTC (permalink / raw)
To: Bjorn Andersson, Konrad Dybcio, Rob Herring, Krzysztof Kozlowski,
Conor Dooley, Matthias Kaehlcke, Greg Kroah-Hartman
Cc: Aleksandrs Vinarskis, linux-arm-msm, devicetree, linux-kernel,
linux-usb, Jens Glathe, Dmitry Baryshkov
From: Jens Glathe <jens.glathe@oldschoolsolutions.biz>
The Camera is built into the Thinkbook 16 G7 QOY and directly attached on the
usb_2 controller (dwc3 USB2 only). It has a separate power supply that needs
to be controlled for PM.
Add the support for this device for the power supply.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Jens Glathe <jens.glathe@oldschoolsolutions.biz>
---
drivers/usb/misc/onboard_usb_dev.c | 2 ++
drivers/usb/misc/onboard_usb_dev.h | 8 ++++++++
2 files changed, 10 insertions(+)
diff --git a/drivers/usb/misc/onboard_usb_dev.c b/drivers/usb/misc/onboard_usb_dev.c
index 5b481876af1b2c10ce625fcf0fb8bfbe8905aa8c..41360a7591e56b2b1fe973ff1c42e68707fff54d 100644
--- a/drivers/usb/misc/onboard_usb_dev.c
+++ b/drivers/usb/misc/onboard_usb_dev.c
@@ -564,6 +564,7 @@ static struct platform_driver onboard_dev_driver = {
/************************** USB driver **************************/
+#define VENDOR_ID_BISON 0x5986
#define VENDOR_ID_CYPRESS 0x04b4
#define VENDOR_ID_GENESYS 0x05e3
#define VENDOR_ID_MICROCHIP 0x0424
@@ -647,6 +648,7 @@ static void onboard_dev_usbdev_disconnect(struct usb_device *udev)
}
static const struct usb_device_id onboard_dev_id_table[] = {
+ { USB_DEVICE(VENDOR_ID_BISON, 0x1198) }, /* Bison Electronics Inc. Integrated Camera */
{ USB_DEVICE(VENDOR_ID_CYPRESS, 0x6500) }, /* CYUSB330x 3.0 HUB */
{ USB_DEVICE(VENDOR_ID_CYPRESS, 0x6502) }, /* CYUSB330x 2.0 HUB */
{ USB_DEVICE(VENDOR_ID_CYPRESS, 0x6503) }, /* CYUSB33{0,1}x 2.0 HUB, Vendor Mode */
diff --git a/drivers/usb/misc/onboard_usb_dev.h b/drivers/usb/misc/onboard_usb_dev.h
index e017b8e22f936be66da73789abb4f620e6af4d6a..c1462be5526d5c15de2493742d27155e6d1ad8ee 100644
--- a/drivers/usb/misc/onboard_usb_dev.h
+++ b/drivers/usb/misc/onboard_usb_dev.h
@@ -73,6 +73,13 @@ static const struct onboard_dev_pdata ti_tusb8041_data = {
.is_hub = true,
};
+static const struct onboard_dev_pdata bison_intcamera_data = {
+ .reset_us = 1000,
+ .num_supplies = 1,
+ .supply_names = { "vdd" },
+ .is_hub = false,
+};
+
static const struct onboard_dev_pdata cypress_hx3_data = {
.reset_us = 10000,
.num_supplies = 2,
@@ -144,6 +151,7 @@ static const struct of_device_id onboard_dev_match[] = {
{ .compatible = "usb2109,817", .data = &vialab_vl817_data, },
{ .compatible = "usb2109,2817", .data = &vialab_vl817_data, },
{ .compatible = "usb20b1,0013", .data = &xmos_xvf3500_data, },
+ { .compatible = "usb5986,1198", .data = &bison_intcamera_data, },
{}
};
--
2.48.1
^ permalink raw reply related [flat|nested] 6+ messages in thread* [PATCH v8 3/4] firmware: qcom: scm: Allow QSEECOM on Lenovo Thinkbook 16
2025-06-30 19:06 [PATCH v8 0/4] arm64: dts: qcom: Add Lenovo ThinkBook 16 device tree Jens Glathe via B4 Relay
2025-06-30 19:06 ` [PATCH v8 1/4] dt-bindings: arm: qcom: Add Lenovo TB16 support Jens Glathe via B4 Relay
2025-06-30 19:06 ` [PATCH v8 2/4] usb: misc: onboard_usb_dev: Add Bison Electronics Inc. Integrated Camera Jens Glathe via B4 Relay
@ 2025-06-30 19:06 ` Jens Glathe via B4 Relay
2025-06-30 19:06 ` [PATCH v8 4/4] arm64: dts: qcom: Add Lenovo ThinkBook 16 G7 QOY device tree Jens Glathe via B4 Relay
2025-07-01 12:59 ` [PATCH v8 0/4] arm64: dts: qcom: Add Lenovo ThinkBook 16 " Rob Herring (Arm)
4 siblings, 0 replies; 6+ messages in thread
From: Jens Glathe via B4 Relay @ 2025-06-30 19:06 UTC (permalink / raw)
To: Bjorn Andersson, Konrad Dybcio, Rob Herring, Krzysztof Kozlowski,
Conor Dooley, Matthias Kaehlcke, Greg Kroah-Hartman
Cc: Aleksandrs Vinarskis, linux-arm-msm, devicetree, linux-kernel,
linux-usb, Jens Glathe, Dmitry Baryshkov
From: Jens Glathe <jens.glathe@oldschoolsolutions.biz>
Allow particular machine accessing eg. efivars.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Jens Glathe <jens.glathe@oldschoolsolutions.biz>
---
drivers/firmware/qcom/qcom_scm.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/firmware/qcom/qcom_scm.c b/drivers/firmware/qcom/qcom_scm.c
index f63b716be5b027550ae3a987e784f0814ea6d678..171cc2a6502463e3445919ef77a129563ea233a4 100644
--- a/drivers/firmware/qcom/qcom_scm.c
+++ b/drivers/firmware/qcom/qcom_scm.c
@@ -1993,6 +1993,7 @@ static const struct of_device_id qcom_scm_qseecom_allowlist[] __maybe_unused = {
{ .compatible = "hp,omnibook-x14" },
{ .compatible = "huawei,gaokun3" },
{ .compatible = "lenovo,flex-5g" },
+ { .compatible = "lenovo,thinkbook-16" },
{ .compatible = "lenovo,thinkpad-t14s" },
{ .compatible = "lenovo,thinkpad-x13s", },
{ .compatible = "lenovo,yoga-slim7x" },
--
2.48.1
^ permalink raw reply related [flat|nested] 6+ messages in thread* [PATCH v8 4/4] arm64: dts: qcom: Add Lenovo ThinkBook 16 G7 QOY device tree
2025-06-30 19:06 [PATCH v8 0/4] arm64: dts: qcom: Add Lenovo ThinkBook 16 device tree Jens Glathe via B4 Relay
` (2 preceding siblings ...)
2025-06-30 19:06 ` [PATCH v8 3/4] firmware: qcom: scm: Allow QSEECOM on Lenovo Thinkbook 16 Jens Glathe via B4 Relay
@ 2025-06-30 19:06 ` Jens Glathe via B4 Relay
2025-07-01 12:59 ` [PATCH v8 0/4] arm64: dts: qcom: Add Lenovo ThinkBook 16 " Rob Herring (Arm)
4 siblings, 0 replies; 6+ messages in thread
From: Jens Glathe via B4 Relay @ 2025-06-30 19:06 UTC (permalink / raw)
To: Bjorn Andersson, Konrad Dybcio, Rob Herring, Krzysztof Kozlowski,
Conor Dooley, Matthias Kaehlcke, Greg Kroah-Hartman
Cc: Aleksandrs Vinarskis, linux-arm-msm, devicetree, linux-kernel,
linux-usb, Jens Glathe
From: Jens Glathe <jens.glathe@oldschoolsolutions.biz>
Device tree for the Lenovo Thinkbook 16 G7 QOY
The Laptop is a Snapdragon X1 / X1 Plus (Purwa) based device [1].
Supported features:
- USB type-c and type-a ports
- Keyboard
- Touchpad (all that are described in the dsdt)
- Touchscreen (described in the dsdt, no known SKUss)
- Display including PWM backlight control
- PCIe devices
- nvme
- SDHC card reader
- ath12k WCN7850 Wifi and Bluetooth
- ADSP and CDSP
- GPIO keys (Lid switch)
- Sound via internal speakers / DMIC / USB / headphone jack
- DP Altmode with 2 lanes (as all of these still do)
- Integrated fingerprint reader (FPC)
- Integrated UVC camera
- X1-45 GPU
Not supported yet:
- HDMI port.
- EC and some fn hotkeys.
Limited support yet:
- SDHC card reader is based on the on-chip sdhc_2 controller, but the driver from
the Snapdragon Dev Kit is only a partial match. It can do normal slow sd cards,
but not UHS-I (SD104) and UHS-II.
This work was done without any schematics or non-public knowledge of the device.
So, it is based on the existing x1e device trees, dsdt analysis, using HWInfo
ARM64, and pure guesswork. It has been confirmed, however, that the device really
has 4 NXP PTN3222 eUSB2 repeaters, one of which doesn't have a reset GPIO (eusb5
@43).
Signed-off-by: Jens Glathe <jens.glathe@oldschoolsolutions.biz>
Co-developed by: Aleksandrs Vinarskis <alex.vinarskis@gmail.com>
---
arch/arm64/boot/dts/qcom/Makefile | 2 +
arch/arm64/boot/dts/qcom/x1e80100-pmics.dtsi | 2 +-
.../boot/dts/qcom/x1p42100-lenovo-thinkbook-16.dts | 1656 ++++++++++++++++++++
3 files changed, 1659 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 4bfa926b6a0850c3c459bcba28129c559d50a7cf..6b1d71daff5a778237c5e3706aaea8e29dafa001 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -333,3 +333,5 @@ x1p42100-asus-zenbook-a14-el2-dtbs := x1p42100-asus-zenbook-a14.dtb x1-el2.dtbo
dtb-$(CONFIG_ARCH_QCOM) += x1p42100-asus-zenbook-a14.dtb x1p42100-asus-zenbook-a14-el2.dtb
x1p42100-crd-el2-dtbs := x1p42100-crd.dtb x1-el2.dtbo
dtb-$(CONFIG_ARCH_QCOM) += x1p42100-crd.dtb x1p42100-crd-el2.dtb
+x1p42100-lenovo-thinkbook-16-el2-dtbs := x1p42100-lenovo-thinkbook-16.dtb x1-el2.dtbo
+dtb-$(CONFIG_ARCH_QCOM) += x1p42100-lenovo-thinkbook-16.dtb x1p42100-lenovo-thinkbook-16-el2.dtb
diff --git a/arch/arm64/boot/dts/qcom/x1e80100-pmics.dtsi b/arch/arm64/boot/dts/qcom/x1e80100-pmics.dtsi
index e3888bc143a0aaae23c92d400d48ea94423e0366..378635f7cb0bfe37cf10644a16bd8b3cca447f3c 100644
--- a/arch/arm64/boot/dts/qcom/x1e80100-pmics.dtsi
+++ b/arch/arm64/boot/dts/qcom/x1e80100-pmics.dtsi
@@ -170,7 +170,7 @@ trip1 {
};
};
- pm8010-thermal {
+ pm8010_thermal: pm8010-thermal {
polling-delay-passive = <100>;
thermal-sensors = <&pm8010_temp_alarm>;
diff --git a/arch/arm64/boot/dts/qcom/x1p42100-lenovo-thinkbook-16.dts b/arch/arm64/boot/dts/qcom/x1p42100-lenovo-thinkbook-16.dts
new file mode 100644
index 0000000000000000000000000000000000000000..c932cbc7c5e0fc16724f3697cee9907384518650
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/x1p42100-lenovo-thinkbook-16.dts
@@ -0,0 +1,1656 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ * Copyright (c) 2024, Linaro Limited
+ * Copyright (c) 2025, Jens Glathe
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+
+#include "x1p42100.dtsi"
+#include "x1e80100-pmics.dtsi"
+
+/delete-node/ &pmc8380_6;
+/delete-node/ &pmc8380_6_thermal;
+/delete-node/ &pm8010;
+/delete-node/ &pm8010_thermal;
+
+/ {
+ model = "Lenovo ThinkBook 16 Gen 7 QOY";
+ compatible = "lenovo,thinkbook-16", "qcom,x1p42100";
+ chassis-type = "laptop";
+
+ aliases {
+ serial0 = &uart21;
+ serial1 = &uart14;
+ };
+
+ wcd938x: audio-codec {
+ compatible = "qcom,wcd9385-codec";
+
+ pinctrl-0 = <&wcd_default>;
+ pinctrl-names = "default";
+
+ qcom,micbias1-microvolt = <1800000>;
+ qcom,micbias2-microvolt = <1800000>;
+ qcom,micbias3-microvolt = <1800000>;
+ qcom,micbias4-microvolt = <1800000>;
+ qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>;
+ qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
+ qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
+ qcom,rx-device = <&wcd_rx>;
+ qcom,tx-device = <&wcd_tx>;
+
+ reset-gpios = <&tlmm 191 GPIO_ACTIVE_LOW>;
+
+ vdd-buck-supply = <&vreg_l15b_1p8>;
+ vdd-rxtx-supply = <&vreg_l15b_1p8>;
+ vdd-io-supply = <&vreg_l15b_1p8>;
+ vdd-mic-bias-supply = <&vreg_bob1>;
+
+ #sound-dai-cells = <1>;
+ };
+
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pm8550_pwm 3 500000>;
+
+ power-supply = <&vreg_edp_bl>;
+ };
+
+ /*
+ * This is an odd one. The camera is physically behind the eusb9 repeater (confirmed) but
+ * if it is placed below the usb_2_dwc3 node, it will be switched of after ~30 seconds.
+ * The reason seems to be that the dwc3 driver does not probe for child nodes when in
+ * host-only mode. But that's the default setting for the xhci controllers due to issues
+ * when in OTG mode. https://lore.kernel.org/all/20241210111444.26240-1-johan+linaro@kernel.org/
+ * The whole reason it is described in the dt (as an USB device) is its requirement for
+ * that additional regulator, and to get power management to switch it off when suspended.
+ * Defining it stand-alone does work.
+ */
+ camera {
+ compatible = "usb5986,1198";
+
+ vdd-supply = <&vreg_cam_5p0>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ pinctrl-0 = <&hall_int_n_default>;
+ pinctrl-names = "default";
+
+ switch-lid {
+ gpios = <&tlmm 92 GPIO_ACTIVE_LOW>;
+ linux,input-type = <EV_SW>;
+ linux,code = <SW_LID>;
+ wakeup-source;
+ wakeup-event-action = <EV_ACT_DEASSERTED>;
+ };
+ };
+
+ pmic-glink {
+ compatible = "qcom,x1e80100-pmic-glink",
+ "qcom,pmic-glink";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ orientation-gpios = <&tlmm 121 GPIO_ACTIVE_HIGH>,
+ <&tlmm 123 GPIO_ACTIVE_HIGH>;
+
+ /* Display-adjacent port */
+ connector@0 {
+ compatible = "usb-c-connector";
+ reg = <0>;
+ power-role = "dual";
+ data-role = "host";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ pmic_glink_ss0_hs_in: endpoint {
+ remote-endpoint = <&usb_1_ss0_dwc3_hs>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ pmic_glink_ss0_ss_in: endpoint {
+ remote-endpoint = <&usb_1_ss0_qmpphy_out>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+
+ pmic_glink_ss0_sbu: endpoint {
+ remote-endpoint = <&usb_1_ss0_sbu_mux>;
+ };
+ };
+ };
+ };
+
+ /* User-adjacent port */
+ connector@1 {
+ compatible = "usb-c-connector";
+ reg = <1>;
+ power-role = "dual";
+ data-role = "host";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ pmic_glink_ss1_hs_in: endpoint {
+ remote-endpoint = <&usb_1_ss1_dwc3_hs>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ pmic_glink_ss1_ss_in: endpoint {
+ remote-endpoint = <&usb_1_ss1_qmpphy_out>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+
+ pmic_glink_ss1_sbu: endpoint {
+ remote-endpoint = <&usb_1_ss1_sbu_mux>;
+ };
+ };
+ };
+ };
+ };
+
+ sound {
+ compatible = "qcom,x1e80100-sndcard";
+ model = "X1E80100-LENOVO-ThinkBook-16";
+ audio-routing = "SpkrLeft IN", "WSA WSA_SPK1 OUT",
+ "SpkrRight IN", "WSA WSA_SPK2 OUT",
+ "IN1_HPHL", "HPHL_OUT",
+ "IN2_HPHR", "HPHR_OUT",
+ "AMIC2", "MIC BIAS2",
+ "VA DMIC0", "MIC BIAS3",
+ "VA DMIC1", "MIC BIAS3",
+ "VA DMIC2", "MIC BIAS1",
+ "VA DMIC3", "MIC BIAS1",
+ "VA DMIC0", "VA MIC BIAS3",
+ "VA DMIC1", "VA MIC BIAS3",
+ "VA DMIC2", "VA MIC BIAS1",
+ "VA DMIC3", "VA MIC BIAS1",
+ "TX SWR_INPUT1", "ADC2_OUTPUT";
+
+ wcd-playback-dai-link {
+ link-name = "WCD Playback";
+
+ cpu {
+ sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>;
+ };
+
+ codec {
+ sound-dai = <&wcd938x 0>, <&swr1 0>, <&lpass_rxmacro 0>;
+ };
+
+ platform {
+ sound-dai = <&q6apm>;
+ };
+ };
+
+ wcd-capture-dai-link {
+ link-name = "WCD Capture";
+
+ cpu {
+ sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>;
+ };
+
+ codec {
+ sound-dai = <&wcd938x 1>, <&swr2 1>, <&lpass_txmacro 0>;
+ };
+
+ platform {
+ sound-dai = <&q6apm>;
+ };
+ };
+
+ wsa-dai-link {
+ link-name = "WSA Playback";
+
+ codec {
+ sound-dai = <&left_spkr>, <&right_spkr>, <&swr0 0>, <&lpass_wsamacro 0>;
+ };
+
+ cpu {
+ sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>;
+ };
+
+ platform {
+ sound-dai = <&q6apm>;
+ };
+ };
+
+ va-dai-link {
+ link-name = "VA Capture";
+
+ codec {
+ sound-dai = <&lpass_vamacro 0>;
+ };
+
+ cpu {
+ sound-dai = <&q6apmbedai VA_CODEC_DMA_TX_0>;
+ };
+
+ platform {
+ sound-dai = <&q6apm>;
+ };
+ };
+ };
+
+ usb-1-ss0-sbu-mux {
+ compatible = "onnn,fsusb42", "gpio-sbu-mux";
+
+ enable-gpios = <&tlmm 167 GPIO_ACTIVE_LOW>;
+ select-gpios = <&tlmm 168 GPIO_ACTIVE_HIGH>;
+
+ pinctrl-0 = <&usb_1_ss0_sbu_default>;
+ pinctrl-names = "default";
+
+ mode-switch;
+ orientation-switch;
+
+ port {
+ usb_1_ss0_sbu_mux: endpoint {
+ remote-endpoint = <&pmic_glink_ss0_sbu>;
+ };
+ };
+ };
+
+ usb-1-ss1-sbu-mux {
+ compatible = "onnn,fsusb42", "gpio-sbu-mux";
+
+ enable-gpios = <&tlmm 178 GPIO_ACTIVE_LOW>;
+ select-gpios = <&tlmm 179 GPIO_ACTIVE_HIGH>;
+
+ pinctrl-0 = <&usb_1_ss1_sbu_default>;
+ pinctrl-names = "default";
+
+ mode-switch;
+ orientation-switch;
+
+ port {
+ usb_1_ss1_sbu_mux: endpoint {
+ remote-endpoint = <&pmic_glink_ss1_sbu>;
+ };
+ };
+ };
+
+ vreg_cam_5p0: regulator-cam-5p0 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VREG_CAM_5P0";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+
+ gpio = <&tlmm 44 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-0 = <&cam_reg_en>;
+ pinctrl-names = "default";
+
+ regulator-boot-on;
+ };
+
+ vreg_edp_3p3: regulator-edp-3p3 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VREG_EDP_3P3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&tlmm 70 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-0 = <&edp_reg_en>;
+ pinctrl-names = "default";
+
+ regulator-boot-on;
+ };
+
+ vreg_edp_bl: regulator-edp-bl {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VBL9";
+ regulator-min-microvolt = <3600000>;
+ regulator-max-microvolt = <3600000>;
+
+ gpio = <&pmc8380_3_gpios 10 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-0 = <&edp_bl_reg_en>;
+ pinctrl-names = "default";
+
+ regulator-boot-on;
+ };
+
+ vreg_misc_3p3: regulator-misc-3p3 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VREG_MISC_3P3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&pm8550ve_8_gpios 6 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-0 = <&misc_3p3_reg_en>;
+ pinctrl-names = "default";
+
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vreg_nvme: regulator-nvme {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VREG_NVME_3P3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&tlmm 18 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-0 = <&nvme_reg_en>;
+ pinctrl-names = "default";
+
+ regulator-boot-on;
+ };
+
+ vreg_wcn_0p95: regulator-wcn-0p95 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VREG_WCN_0P95";
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <950000>;
+
+ vin-supply = <&vreg_wcn_3p3>;
+ };
+
+ vreg_wcn_1p9: regulator-wcn-1p9 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VREG_WCN_1P9";
+ regulator-min-microvolt = <1900000>;
+ regulator-max-microvolt = <1900000>;
+
+ vin-supply = <&vreg_wcn_3p3>;
+ };
+
+ vreg_wcn_3p3: regulator-wcn-3p3 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VREG_WCN_3P3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&tlmm 214 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-0 = <&wcn_sw_en>;
+ pinctrl-names = "default";
+
+ regulator-boot-on;
+ };
+
+ vph_pwr: regulator-vph-pwr {
+ compatible = "regulator-fixed";
+
+ regulator-name = "vph_pwr";
+ regulator-min-microvolt = <3700000>;
+ regulator-max-microvolt = <3700000>;
+
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ wcn7850-pmu {
+ compatible = "qcom,wcn7850-pmu";
+
+ vdd-supply = <&vreg_wcn_0p95>;
+ vddio-supply = <&vreg_l15b_1p8>;
+ vddaon-supply = <&vreg_wcn_0p95>;
+ vdddig-supply = <&vreg_wcn_0p95>;
+ vddrfa1p2-supply = <&vreg_wcn_1p9>;
+ vddrfa1p8-supply = <&vreg_wcn_1p9>;
+
+ wlan-enable-gpios = <&tlmm 117 GPIO_ACTIVE_HIGH>;
+ bt-enable-gpios = <&tlmm 116 GPIO_ACTIVE_HIGH>;
+
+ pinctrl-0 = <&wcn_wlan_en>;
+ pinctrl-1 = <&wcn_bt_en>;
+ pinctrl-names = "default";
+
+ regulators {
+ vreg_pmu_rfa_cmn: ldo0 {
+ regulator-name = "vreg_pmu_rfa_cmn";
+ };
+
+ vreg_pmu_aon_0p59: ldo1 {
+ regulator-name = "vreg_pmu_aon_0p59";
+ };
+
+ vreg_pmu_wlcx_0p8: ldo2 {
+ regulator-name = "vreg_pmu_wlcx_0p8";
+ };
+
+ vreg_pmu_wlmx_0p85: ldo3 {
+ regulator-name = "vreg_pmu_wlmx_0p85";
+ };
+
+ vreg_pmu_btcmx_0p85: ldo4 {
+ regulator-name = "vreg_pmu_btcmx_0p85";
+ };
+
+ vreg_pmu_rfa_0p8: ldo5 {
+ regulator-name = "vreg_pmu_rfa_0p8";
+ };
+
+ vreg_pmu_rfa_1p2: ldo6 {
+ regulator-name = "vreg_pmu_rfa_1p2";
+ };
+
+ vreg_pmu_rfa_1p8: ldo7 {
+ regulator-name = "vreg_pmu_rfa_1p8";
+ };
+
+ vreg_pmu_pcie_0p9: ldo8 {
+ regulator-name = "vreg_pmu_pcie_0p9";
+ };
+
+ vreg_pmu_pcie_1p8: ldo9 {
+ regulator-name = "vreg_pmu_pcie_1p8";
+ };
+ };
+ };
+};
+
+&apps_rsc {
+ regulators-0 {
+ compatible = "qcom,pm8550-rpmh-regulators";
+ qcom,pmic-id = "b";
+
+ vdd-bob1-supply = <&vph_pwr>;
+ vdd-bob2-supply = <&vph_pwr>;
+ vdd-l1-l4-l10-supply = <&vreg_s4c_1p8>;
+ vdd-l2-l13-l14-supply = <&vreg_bob1>;
+ vdd-l5-l16-supply = <&vreg_bob1>;
+ vdd-l6-l7-supply = <&vreg_bob2>;
+ vdd-l8-l9-supply = <&vreg_bob1>;
+ vdd-l12-supply = <&vreg_s5j_1p2>;
+ vdd-l15-supply = <&vreg_s4c_1p8>;
+ vdd-l17-supply = <&vreg_bob2>;
+
+ vreg_bob1: bob1 {
+ regulator-name = "vreg_bob1";
+ regulator-min-microvolt = <3008000>;
+ regulator-max-microvolt = <3960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_bob2: bob2 {
+ regulator-name = "vreg_bob2";
+ regulator-min-microvolt = <2504000>;
+ regulator-max-microvolt = <3008000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l1b_1p8: ldo1 {
+ regulator-name = "vreg_l1b_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2b_3p0: ldo2 {
+ regulator-name = "vreg_l2b_3p0";
+ regulator-min-microvolt = <3072000>;
+ regulator-max-microvolt = <3072000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l4b_1p8: ldo4 {
+ regulator-name = "vreg_l4b_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l5b_3p0: ldo5 {
+ regulator-name = "vreg_l5b_3p0";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l6b_1p8: ldo6 {
+ regulator-name = "vreg_l6b_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l7b_2p8: ldo7 {
+ regulator-name = "vreg_l7b_2p8";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l8b_3p0: ldo8 {
+ regulator-name = "vreg_l8b_3p0";
+ regulator-min-microvolt = <3072000>;
+ regulator-max-microvolt = <3072000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l9b_2p9: ldo9 {
+ regulator-name = "vreg_l9b_2p9";
+ regulator-min-microvolt = <2960000>;
+ regulator-max-microvolt = <2960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l10b_1p8: ldo10 {
+ regulator-name = "vreg_l10b_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l12b_1p2: ldo12 {
+ regulator-name = "vreg_l12b_1p2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-always-on;
+ };
+
+ vreg_l13b_3p0: ldo13 {
+ regulator-name = "vreg_l13b_3p0";
+ regulator-min-microvolt = <3072000>;
+ regulator-max-microvolt = <3072000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l14b_3p0: ldo14 {
+ regulator-name = "vreg_l14b_3p0";
+ regulator-min-microvolt = <3072000>;
+ regulator-max-microvolt = <3072000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l15b_1p8: ldo15 {
+ regulator-name = "vreg_l15b_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-always-on;
+ };
+
+ vreg_l16b_2p9: ldo16 {
+ regulator-name = "vreg_l16b_2p9";
+ regulator-min-microvolt = <2912000>;
+ regulator-max-microvolt = <2912000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l17b_2p5: ldo17 {
+ regulator-name = "vreg_l17b_2p5";
+ regulator-min-microvolt = <2504000>;
+ regulator-max-microvolt = <2504000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-1 {
+ compatible = "qcom,pm8550ve-rpmh-regulators";
+ qcom,pmic-id = "c";
+
+ vdd-l1-supply = <&vreg_s5j_1p2>;
+ vdd-l2-supply = <&vreg_s1f_0p7>;
+ vdd-l3-supply = <&vreg_s1f_0p7>;
+ vdd-s4-supply = <&vph_pwr>;
+
+ vreg_s4c_1p8: smps4 {
+ regulator-name = "vreg_s4c_1p8";
+ regulator-min-microvolt = <1856000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l1c_1p2: ldo1 {
+ regulator-name = "vreg_l1c_1p2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2c_0p8: ldo2 {
+ regulator-name = "vreg_l2c_0p8";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <880000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3c_0p8: ldo3 {
+ regulator-name = "vreg_l3c_0p8";
+ regulator-min-microvolt = <912000>;
+ regulator-max-microvolt = <912000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-2 {
+ compatible = "qcom,pmc8380-rpmh-regulators";
+ qcom,pmic-id = "d";
+
+ vdd-l1-supply = <&vreg_s1f_0p7>;
+ vdd-l2-supply = <&vreg_s1f_0p7>;
+ vdd-l3-supply = <&vreg_s4c_1p8>;
+ vdd-s1-supply = <&vph_pwr>;
+
+ vreg_l1d_0p8: ldo1 {
+ regulator-name = "vreg_l1d_0p8";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <880000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2d_0p9: ldo2 {
+ regulator-name = "vreg_l2d_0p9";
+ regulator-min-microvolt = <912000>;
+ regulator-max-microvolt = <912000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3d_1p8: ldo3 {
+ regulator-name = "vreg_l3d_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-3 {
+ compatible = "qcom,pmc8380-rpmh-regulators";
+ qcom,pmic-id = "e";
+
+ vdd-l2-supply = <&vreg_s1f_0p7>;
+ vdd-l3-supply = <&vreg_s5j_1p2>;
+
+ vreg_l2e_0p8: ldo2 {
+ regulator-name = "vreg_l2e_0p8";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <880000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3e_1p2: ldo3 {
+ regulator-name = "vreg_l3e_1p2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-4 {
+ compatible = "qcom,pmc8380-rpmh-regulators";
+ qcom,pmic-id = "f";
+
+ vdd-l1-supply = <&vreg_s5j_1p2>;
+ vdd-l2-supply = <&vreg_s5j_1p2>;
+ vdd-l3-supply = <&vreg_s5j_1p2>;
+ vdd-s1-supply = <&vph_pwr>;
+
+ vreg_s1f_0p7: smps1 {
+ regulator-name = "vreg_s1f_0p7";
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l1f_1p0: ldo1 {
+ regulator-name = "vreg_l1f_1p0";
+ regulator-min-microvolt = <1024000>;
+ regulator-max-microvolt = <1024000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2f_1p0: ldo2 {
+ regulator-name = "vreg_l2f_1p0";
+ regulator-min-microvolt = <1024000>;
+ regulator-max-microvolt = <1024000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3f_1p0: ldo3 {
+ regulator-name = "vreg_l3f_1p0";
+ regulator-min-microvolt = <1024000>;
+ regulator-max-microvolt = <1024000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-6 {
+ compatible = "qcom,pm8550ve-rpmh-regulators";
+ qcom,pmic-id = "i";
+
+ vdd-l1-supply = <&vreg_s4c_1p8>;
+ vdd-l2-supply = <&vreg_s5j_1p2>;
+ vdd-l3-supply = <&vreg_s1f_0p7>;
+ vdd-s1-supply = <&vph_pwr>;
+ vdd-s2-supply = <&vph_pwr>;
+
+ vreg_l1i_1p8: ldo1 {
+ regulator-name = "vreg_l1i_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-always-on;
+ };
+
+ vreg_l2i_1p2: ldo2 {
+ regulator-name = "vreg_l2i_1p2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3i_0p8: ldo3 {
+ regulator-name = "vreg_l3i_0p8";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <880000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_s1i_0p9: smps1 {
+ regulator-name = "vreg_s1i_0p9";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <920000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_s2i_1p0: smps2 {
+ regulator-name = "vreg_s2i_1p0";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-7 {
+ compatible = "qcom,pm8550ve-rpmh-regulators";
+ qcom,pmic-id = "j";
+
+ vdd-l1-supply = <&vreg_s1f_0p7>;
+ vdd-l2-supply = <&vreg_s5j_1p2>;
+ vdd-l3-supply = <&vreg_s1f_0p7>;
+ vdd-s5-supply = <&vph_pwr>;
+
+ vreg_s5j_1p2: smps5 {
+ regulator-name = "vreg_s5j_1p2";
+ regulator-min-microvolt = <1256000>;
+ regulator-max-microvolt = <1304000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l1j_0p8: ldo1 {
+ regulator-name = "vreg_l1j_0p8";
+ regulator-min-microvolt = <912000>;
+ regulator-max-microvolt = <912000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2j_1p2: ldo2 {
+ regulator-name = "vreg_l2j_1p2";
+ regulator-min-microvolt = <1256000>;
+ regulator-max-microvolt = <1256000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3j_0p8: ldo3 {
+ regulator-name = "vreg_l3j_0p8";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <880000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+};
+
+&gpu {
+ status = "okay";
+};
+
+&gpu_zap_shader {
+ firmware-name = "qcom/x1p42100/LENOVO/21NH/qcdxkmsucpurwa.mbn";
+};
+
+&i2c2 {
+ clock-frequency = <400000>;
+
+ pinctrl-0 = <&qup_i2c2_data_clk>, <&tpad_default>, <&kybd_default>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ /* ELAN06FA */
+ touchpad@15 {
+ compatible = "hid-over-i2c";
+ reg = <0x15>;
+
+ hid-descr-addr = <0x1>;
+ interrupts-extended = <&tlmm 3 IRQ_TYPE_LEVEL_LOW>;
+
+ vdd-supply = <&vreg_misc_3p3>;
+ vddl-supply = <&vreg_l12b_1p2>;
+
+ wakeup-source;
+ };
+
+ /* CIRQ1080 or SYNA2BA6 */
+ touchpad@2c {
+ compatible = "hid-over-i2c";
+ reg = <0x2c>;
+
+ hid-descr-addr = <0x20>;
+ interrupts-extended = <&tlmm 3 IRQ_TYPE_LEVEL_LOW>;
+
+ vdd-supply = <&vreg_misc_3p3>;
+ vddl-supply = <&vreg_l12b_1p2>;
+
+ wakeup-source;
+ };
+
+ /* FTCS0038 */
+ touchpad@38 {
+ compatible = "hid-over-i2c";
+ reg = <0x38>;
+
+ hid-descr-addr = <0x1>;
+ interrupts-extended = <&tlmm 3 IRQ_TYPE_LEVEL_LOW>;
+
+ vdd-supply = <&vreg_misc_3p3>;
+ vddl-supply = <&vreg_l12b_1p2>;
+
+ wakeup-source;
+ };
+
+ keyboard@3a {
+ compatible = "hid-over-i2c";
+ reg = <0x3a>;
+
+ hid-descr-addr = <0x1>;
+ interrupts-extended = <&tlmm 67 IRQ_TYPE_LEVEL_LOW>;
+
+ vdd-supply = <&vreg_misc_3p3>;
+ vddl-supply = <&vreg_l12b_1p2>;
+
+ wakeup-source;
+ };
+
+ /* GXTP5100 */
+ touchpad@5d {
+ compatible = "hid-over-i2c";
+ reg = <0x5d>;
+
+ hid-descr-addr = <0x1>;
+ interrupts-extended = <&tlmm 3 IRQ_TYPE_LEVEL_LOW>;
+
+ vdd-supply = <&vreg_misc_3p3>;
+ vddl-supply = <&vreg_l12b_1p2>;
+
+ wakeup-source;
+ };
+};
+
+&i2c5 {
+ clock-frequency = <400000>;
+
+ status = "okay";
+
+ eusb5_repeater: redriver@43 {
+ compatible = "nxp,ptn3222";
+ reg = <0x43>;
+ #phy-cells = <0>;
+
+ vdd3v3-supply = <&vreg_l13b_3p0>;
+ vdd1v8-supply = <&vreg_l4b_1p8>;
+ };
+
+ eusb3_repeater: redriver@47 {
+ compatible = "nxp,ptn3222";
+ reg = <0x47>;
+ #phy-cells = <0>;
+
+ vdd3v3-supply = <&vreg_l13b_3p0>;
+ vdd1v8-supply = <&vreg_l4b_1p8>;
+
+ reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>;
+
+ pinctrl-0 = <&eusb3_reset_n>;
+ pinctrl-names = "default";
+ };
+
+ eusb9_repeater: redriver@4b {
+ compatible = "nxp,ptn3222";
+ reg = <0x4b>;
+ #phy-cells = <0>;
+
+ vdd3v3-supply = <&vreg_l13b_3p0>;
+ vdd1v8-supply = <&vreg_l4b_1p8>;
+
+ reset-gpios = <&tlmm 7 GPIO_ACTIVE_LOW>;
+
+ pinctrl-0 = <&eusb9_reset_n>;
+ pinctrl-names = "default";
+ };
+
+ eusb6_repeater: redriver@4f {
+ compatible = "nxp,ptn3222";
+ reg = <0x4f>;
+ #phy-cells = <0>;
+
+ vdd3v3-supply = <&vreg_l13b_3p0>;
+ vdd1v8-supply = <&vreg_l4b_1p8>;
+
+ reset-gpios = <&tlmm 184 GPIO_ACTIVE_LOW>;
+
+ pinctrl-0 = <&eusb6_reset_n>;
+ pinctrl-names = "default";
+ };
+};
+
+&i2c8 {
+ clock-frequency = <400000>;
+
+ status = "okay";
+
+ /* ILIT2911 or GTCH1563 */
+ touchscreen@10 {
+ compatible = "hid-over-i2c";
+ reg = <0x10>;
+
+ hid-descr-addr = <0x1>;
+ interrupts-extended = <&tlmm 51 IRQ_TYPE_LEVEL_LOW>;
+
+ vdd-supply = <&vreg_misc_3p3>;
+ vddl-supply = <&vreg_l15b_1p8>;
+
+ pinctrl-0 = <&ts0_default>;
+ pinctrl-names = "default";
+ };
+};
+
+&lpass_tlmm {
+ spkr_01_sd_n_active: spkr-01-sd-n-active-state {
+ pins = "gpio12";
+ function = "gpio";
+ drive-strength = <16>;
+ bias-disable;
+ output-low;
+ };
+};
+
+&lpass_vamacro {
+ pinctrl-0 = <&dmic01_default>, <&dmic23_default>;
+ pinctrl-names = "default";
+
+ vdd-micb-supply = <&vreg_l1b_1p8>;
+ qcom,dmic-sample-rate = <4800000>;
+};
+
+&mdss {
+ status = "okay";
+};
+
+&mdss_dp0 {
+ status = "okay";
+};
+
+&mdss_dp0_out {
+ data-lanes = <0 1 2 3>;
+ link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+};
+
+&mdss_dp1 {
+ status = "okay";
+};
+
+&mdss_dp1_out {
+ data-lanes = <0 1 2 3>;
+ link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+};
+
+&mdss_dp2 {
+ status = "okay";
+};
+
+&mdss_dp2_out {
+ data-lanes = <0 1 2 3>;
+ link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+};
+
+&mdss_dp2_phy {
+// vdda-phy-supply = <&vreg_l3b>;
+// vdda-pll-supply = <&vreg_l6b>;
+
+ status = "okay";
+};
+
+&mdss_dp3 {
+ /delete-property/ #sound-dai-cells;
+
+ status = "okay";
+
+ aux-bus {
+ panel {
+ compatible = "edp-panel";
+
+ backlight = <&backlight>;
+
+ enable-gpios = <&pmc8380_3_gpios 4 GPIO_ACTIVE_HIGH>;
+ pinctrl-0 = <&edp_bl_en>;
+ pinctrl-names = "default";
+
+ power-supply = <&vreg_edp_3p3>;
+
+ port {
+ edp_panel_in: endpoint {
+ remote-endpoint = <&mdss_dp3_out>;
+ };
+ };
+ };
+ };
+
+ ports {
+ port@1 {
+ reg = <1>;
+
+ mdss_dp3_out: endpoint {
+ data-lanes = <0 1 2 3>;
+ link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+
+ remote-endpoint = <&edp_panel_in>;
+ };
+ };
+ };
+};
+
+&mdss_dp3_phy {
+ vdda-phy-supply = <&vreg_l3j_0p8>;
+ vdda-pll-supply = <&vreg_l2j_1p2>;
+
+ status = "okay";
+};
+
+&pcie4 {
+ perst-gpios = <&tlmm 146 GPIO_ACTIVE_LOW>;
+ wake-gpios = <&tlmm 148 GPIO_ACTIVE_LOW>;
+
+ pinctrl-0 = <&pcie4_default>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&pcie4_phy {
+ vdda-phy-supply = <&vreg_l3i_0p8>;
+ vdda-pll-supply = <&vreg_l3e_1p2>;
+
+ status = "okay";
+};
+
+&pcie4_port0 {
+ wifi@0 {
+ compatible = "pci17cb,1107";
+ reg = <0x10000 0x0 0x0 0x0 0x0>;
+
+ vddaon-supply = <&vreg_pmu_aon_0p59>;
+ vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+ vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
+ vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
+ vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+ vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+ vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>;
+ vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>;
+ vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>;
+ };
+};
+
+&pcie6a {
+ perst-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>;
+ wake-gpios = <&tlmm 154 GPIO_ACTIVE_LOW>;
+
+ vddpe-3v3-supply = <&vreg_nvme>;
+
+ pinctrl-0 = <&pcie6a_default>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&pcie6a_phy {
+ vdda-phy-supply = <&vreg_l1d_0p8>;
+ vdda-pll-supply = <&vreg_l2j_1p2>;
+
+ status = "okay";
+};
+
+&pm8550_pwm {
+ status = "okay";
+};
+
+&pm8550ve_8_gpios {
+ misc_3p3_reg_en: misc-3p3-reg-en-state {
+ pins = "gpio6";
+ function = "normal";
+ bias-disable;
+ input-disable;
+ output-enable;
+ drive-push-pull;
+ power-source = <1>; /* 1.8 V */
+ qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+ };
+};
+
+&pmc8380_3_gpios {
+ edp_bl_en: edp-bl-en-state {
+ pins = "gpio4";
+ function = "normal";
+ power-source = <1>; /* 1.8V */
+ input-disable;
+ output-enable;
+ };
+
+ edp_bl_reg_en: edp-bl-reg-en-state {
+ pins = "gpio10";
+ function = "normal";
+ };
+};
+
+&qupv3_0 {
+ status = "okay";
+};
+
+&qupv3_1 {
+ status = "okay";
+};
+
+&qupv3_2 {
+ status = "okay";
+};
+
+&remoteproc_adsp {
+ firmware-name = "qcom/x1p42100/LENOVO/21NH/qcadsp8380.mbn",
+ "qcom/x1p42100/LENOVO/21NH/adsp_dtbs.elf";
+
+ status = "okay";
+};
+
+&remoteproc_cdsp {
+ firmware-name = "qcom/x1p42100/LENOVO/21NH/qccdsp8380.mbn",
+ "qcom/x1p42100/LENOVO/21NH/cdsp_dtbs.elf";
+
+ status = "okay";
+};
+
+&sdhc_2 {
+ cd-gpios = <&tlmm 71 GPIO_ACTIVE_LOW>;
+ pinctrl-0 = <&sdc2_default &sdc2_card_det_n>;
+ pinctrl-1 = <&sdc2_sleep &sdc2_card_det_n>;
+ pinctrl-names = "default", "sleep";
+ vmmc-supply = <&vreg_l9b_2p9>;
+ vqmmc-supply = <&vreg_l6b_1p8>;
+// bus-width = <4>;
+// no-sdio;
+// no-mmc;
+ status = "okay";
+};
+
+&smb2360_0 {
+ status = "okay";
+};
+
+&smb2360_0_eusb2_repeater {
+ vdd18-supply = <&vreg_l3d_1p8>;
+ vdd3-supply = <&vreg_l2b_3p0>;
+};
+
+&smb2360_1 {
+ status = "okay";
+};
+
+&smb2360_1_eusb2_repeater {
+ vdd18-supply = <&vreg_l3d_1p8>;
+ vdd3-supply = <&vreg_l14b_3p0>;
+};
+
+&swr0 {
+ status = "okay";
+
+ pinctrl-0 = <&wsa_swr_active>, <&spkr_01_sd_n_active>;
+ pinctrl-names = "default";
+
+ /* WSA8845, Left Speaker */
+ left_spkr: speaker@0,0 {
+ compatible = "sdw20217020400";
+ reg = <0 0>;
+ reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>;
+ #sound-dai-cells = <0>;
+ sound-name-prefix = "SpkrLeft";
+ vdd-1p8-supply = <&vreg_l15b_1p8>;
+ vdd-io-supply = <&vreg_l12b_1p2>;
+ qcom,port-mapping = <1 2 3 7 10 13>;
+ };
+
+ /* WSA8845, Right Speaker */
+ right_spkr: speaker@0,1 {
+ compatible = "sdw20217020400";
+ reg = <0 1>;
+ reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>;
+ #sound-dai-cells = <0>;
+ sound-name-prefix = "SpkrRight";
+ vdd-1p8-supply = <&vreg_l15b_1p8>;
+ vdd-io-supply = <&vreg_l12b_1p2>;
+ qcom,port-mapping = <4 5 6 7 11 13>;
+ };
+};
+
+&swr1 {
+ status = "okay";
+
+ /* WCD9385 RX */
+ wcd_rx: codec@0,4 {
+ compatible = "sdw20217010d00";
+ reg = <0 4>;
+ qcom,rx-port-mapping = <1 2 3 4 5>;
+ };
+};
+
+&swr2 {
+ status = "okay";
+
+ /* WCD9385 TX */
+ wcd_tx: codec@0,3 {
+ compatible = "sdw20217010d00";
+ reg = <0 3>;
+ qcom,tx-port-mapping = <2 2 3 4>;
+ };
+};
+
+&tlmm {
+ gpio-reserved-ranges = <34 2>, /* Unused */
+ <72 2>, /* Secure EC I2C connection (?) */
+ <238 1>; /* UFS Reset */
+
+ cam_reg_en: cam-reg-en-state {
+ pins = "gpio44";
+ function = "gpio";
+ drive-strength = <16>;
+ bias-disable;
+ };
+
+ eusb3_reset_n: eusb3-reset-n-state {
+ pins = "gpio6";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ output-low;
+ };
+
+ eusb6_reset_n: eusb6-reset-n-state {
+ pins = "gpio184";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ output-low;
+ };
+
+ eusb9_reset_n: eusb9-reset-n-state {
+ pins = "gpio7";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ output-low;
+ };
+
+ edp_reg_en: edp-reg-en-state {
+ pins = "gpio70";
+ function = "gpio";
+ drive-strength = <16>;
+ bias-disable;
+ };
+
+ hall_int_n_default: hall-int-n-state {
+ pins = "gpio92";
+ function = "gpio";
+ bias-disable;
+ };
+
+ kybd_default: kybd-default-state {
+ pins = "gpio67";
+ function = "gpio";
+ bias-disable;
+ };
+
+ nvme_reg_en: nvme-reg-en-state {
+ pins = "gpio18";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ pcie4_default: pcie4-default-state {
+ clkreq-n-pins {
+ pins = "gpio147";
+ function = "pcie4_clk";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ perst-n-pins {
+ pins = "gpio146";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ wake-n-pins {
+ pins = "gpio148";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ pcie6a_default: pcie6a-default-state {
+ clkreq-n-pins {
+ pins = "gpio153";
+ function = "pcie6a_clk";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ perst-n-pins {
+ pins = "gpio152";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ wake-n-pins {
+ pins = "gpio154";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ sdc2_card_det_n: sdc2-card-det-state {
+ pins = "gpio71";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ tpad_default: tpad-default-state {
+ pins = "gpio3";
+ function = "gpio";
+ bias-pull-up;
+ };
+
+ ts0_default: ts0-default-state {
+ int-n-pins {
+ pins = "gpio51";
+ function = "gpio";
+ bias-disable;
+ };
+
+ reset-n-pins {
+ pins = "gpio48";
+ function = "gpio";
+ output-high;
+ drive-strength = <16>;
+ };
+ };
+
+ usb_1_ss0_sbu_default: usb-1-ss0-sbu-state {
+ oe-n-pins {
+ pins = "gpio167";
+ function = "gpio";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+
+ sel-pins {
+ pins = "gpio168";
+ function = "gpio";
+ bias-pul-up;
+ drive-strength = <2>;
+ };
+
+ };
+
+ usb_1_ss1_sbu_default: usb-1-ss1-sbu-state {
+ oe-n-pins {
+ pins = "gpio178";
+ function = "gpio";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+
+ sel-pins {
+ pins = "gpio179";
+ function = "gpio";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+ };
+
+ wcd_default: wcd-reset-n-active-state {
+ pins = "gpio191";
+ function = "gpio";
+ drive-strength = <16>;
+ bias-disable;
+ output-low;
+ };
+
+ wcn_bt_en: wcn-bt-en-state {
+ pins = "gpio116";
+ function = "gpio";
+ drive-strength = <16>;
+ output-low;
+ bias-pull-down;
+ };
+
+ wcn_sw_en: wcn-sw-en-state {
+ pins = "gpio214";
+ function = "gpio";
+ drive-strength = <16>;
+ bias-disable;
+ };
+
+ wcn_wlan_en: wcn-wlan-en-state {
+ pins = "gpio117";
+ function = "gpio";
+ drive-strength = <16>;
+ bias-disable;
+ };
+};
+
+&uart14 {
+ status = "okay";
+
+ bluetooth {
+ compatible = "qcom,wcn7850-bt";
+ max-speed = <3200000>;
+
+ vddaon-supply = <&vreg_pmu_aon_0p59>;
+ vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+ vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
+ vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
+ vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+ vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+ vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>;
+ };
+};
+
+&usb_1_ss0_hsphy {
+ vdd-supply = <&vreg_l3j_0p8>;
+ vdda12-supply = <&vreg_l2j_1p2>;
+
+ phys = <&smb2360_0_eusb2_repeater>;
+
+ status = "okay";
+};
+
+&usb_1_ss0_qmpphy {
+ vdda-phy-supply = <&vreg_l3e_1p2>;
+ vdda-pll-supply = <&vreg_l1j_0p8>;
+
+ status = "okay";
+};
+
+&usb_1_ss0 {
+ status = "okay";
+};
+
+&usb_1_ss0_dwc3 {
+ dr_mode = "host";
+};
+
+&usb_1_ss0_dwc3_hs {
+ remote-endpoint = <&pmic_glink_ss0_hs_in>;
+};
+
+&usb_1_ss0_qmpphy_out {
+ remote-endpoint = <&pmic_glink_ss0_ss_in>;
+};
+
+&usb_1_ss1_hsphy {
+ vdd-supply = <&vreg_l3j_0p8>;
+ vdda12-supply = <&vreg_l2j_1p2>;
+
+ phys = <&smb2360_1_eusb2_repeater>;
+
+ status = "okay";
+};
+
+&usb_1_ss1_qmpphy {
+ vdda-phy-supply = <&vreg_l2j_1p2>;
+ vdda-pll-supply = <&vreg_l2d_0p9>;
+
+ status = "okay";
+};
+
+&usb_1_ss1 {
+ status = "okay";
+};
+
+&usb_1_ss1_dwc3 {
+ dr_mode = "host";
+};
+
+&usb_1_ss1_dwc3_hs {
+ remote-endpoint = <&pmic_glink_ss1_hs_in>;
+};
+
+&usb_1_ss1_qmpphy_out {
+ remote-endpoint = <&pmic_glink_ss1_ss_in>;
+};
+
+&usb_1_ss2 {
+ status = "okay";
+};
+
+&usb_1_ss2_dwc3 {
+ dr_mode = "host";
+ maximum-speed = "high-speed";
+ phys = <&usb_1_ss2_hsphy>;
+ phy-names = "usb2-phy";
+};
+
+&usb_1_ss2_hsphy {
+ vdd-supply = <&vreg_l3j_0p8>;
+ vdda12-supply = <&vreg_l2j_1p2>;
+
+ phys = <&eusb5_repeater>;
+
+ status = "okay";
+};
+
+&usb_2 {
+ status = "okay";
+};
+
+&usb_2_dwc3 {
+ dr_mode = "host";
+};
+
+&usb_2_hsphy {
+ vdd-supply = <&vreg_l2e_0p8>;
+ vdda12-supply = <&vreg_l3e_1p2>;
+
+ phys = <&eusb9_repeater>;
+
+ status = "okay";
+};
+
+&usb_mp {
+ status = "okay";
+};
+
+&usb_mp_hsphy0 {
+ vdd-supply = <&vreg_l2e_0p8>;
+ vdda12-supply = <&vreg_l3e_1p2>;
+
+ phys = <&eusb6_repeater>;
+
+ status = "okay";
+};
+
+&usb_mp_qmpphy0 {
+ vdda-phy-supply = <&vreg_l3e_1p2>;
+ vdda-pll-supply = <&vreg_l3c_0p8>;
+
+ status = "okay";
+};
+
+&usb_mp_hsphy1 {
+ vdd-supply = <&vreg_l2e_0p8>;
+ vdda12-supply = <&vreg_l3e_1p2>;
+
+ phys = <&eusb3_repeater>;
+
+ status = "okay";
+};
+
+&usb_mp_qmpphy1 {
+ vdda-phy-supply = <&vreg_l3e_1p2>;
+ vdda-pll-supply = <&vreg_l3c_0p8>;
+
+ status = "okay";
+};
--
2.48.1
^ permalink raw reply related [flat|nested] 6+ messages in thread* Re: [PATCH v8 0/4] arm64: dts: qcom: Add Lenovo ThinkBook 16 device tree
2025-06-30 19:06 [PATCH v8 0/4] arm64: dts: qcom: Add Lenovo ThinkBook 16 device tree Jens Glathe via B4 Relay
` (3 preceding siblings ...)
2025-06-30 19:06 ` [PATCH v8 4/4] arm64: dts: qcom: Add Lenovo ThinkBook 16 G7 QOY device tree Jens Glathe via B4 Relay
@ 2025-07-01 12:59 ` Rob Herring (Arm)
4 siblings, 0 replies; 6+ messages in thread
From: Rob Herring (Arm) @ 2025-07-01 12:59 UTC (permalink / raw)
To: Jens Glathe
Cc: linux-usb, Aleksandrs Vinarskis, linux-arm-msm, Conor Dooley,
Bjorn Andersson, Dmitry Baryshkov, Greg Kroah-Hartman, devicetree,
Krzysztof Kozlowski, linux-kernel, Matthias Kaehlcke,
Konrad Dybcio
On Mon, 30 Jun 2025 21:06:38 +0200, Jens Glathe wrote:
> Device tree for the Lenovo Thinkbook 16 G7 QOY
>
> The Laptop is a Snapdragon X1 / X1 Plus (Purwa) based device [1].
>
> Supported features:
>
> - USB type-c and type-a ports
> - Keyboard
> - Touchpad (all that are described in the dsdt)
> - Touchscreen (described in the dsdt, no known SKUss)
> - Display including PWM backlight control
> - PCIe devices
> - nvme
> - SDHC card reader
> - ath12k WCN7850 Wifi and Bluetooth
> - ADSP and CDSP
> - GPIO keys (Lid switch)
> - Sound via internal speakers / DMIC / USB / headphone jack
> - DP Altmode with 2 lanes (as all of these still do)
> - Integrated fingerprint reader (FPC)
> - Integrated UVC camera
> - X1-45 GPU
>
> Not supported yet:
>
> - HDMI port.
> - EC and some fn hotkeys.
>
> Limited support yet:
>
> - SDHC card reader is based on the on-chip sdhc_2 controller, but the driver from
> the Snapdragon Dev Kit is only a partial match. It can do normal slow sd cards,
> but not UHS-I (SD104) and UHS-II.
>
> Notes:
>
> - Putting the camera behind usb_2_dwc3 results in the camera switched off after 30
> seconds. With the stand-alone node as previously defined it stays usable and
> suspends, as intended. Sincethe sole reason for the USB camera to be in the
> devicetree is the required extra supply (which is guessed, as mentioned), and
> its handling by power management, I would propose to keep it this way.
>
> - The gpi_dma nodes appear to be implicitly enabled when a serial device is used.
> I added them, no change in behaviour, though. Since this would be the only X1
> device adding them afaik, I left them out.
>
> - The cma-memory is removed, it is not on all x1 devices as I assumed.
> Haven't found a case where it is required.
>
> - i2c2 defines the keyboard and 4 different touchpad interfaces. With the bundling
> of the pinctrl it seems to work better. I've had issues with only clock and touchpad
> pinctrl on the i2c2 node, and not keyboard.
>
> This work was done without any schematics or non-public knowledge of the device.
> So, it is based on the existing x1 device trees, dsdt analysis, using HWInfo
> ARM64, and pure guesswork. It has been confirmed, however, that the device really
> has 4 NXP PTN3222 eUSB2 repeaters, one of which doesn't have a reset GPIO (eusb5
> @43).
>
> I have brought up the Thinkbook over the last 5 months since the x1p42100-crd
> patches were available. The laptop is very usable now, and quite solid as a dev/
> test platform.
>
> Big thanks to Aleksandrs Vinarskis for helping (and sort of persisting) on the
> fingerprint, camera and HDMI issues.
>
> [1]: https://psref.lenovo.com/syspool/Sys/PDF/ThinkBook/ThinkBook_16_G7_QOY/ThinkBook_16_G7_QOY_Spec.pdf
>
> Signed-off-by: Jens Glathe <jens.glathe@oldschoolsolutions.biz>
> ---
> Changes in v8:
> - rebase to next-20250630
> - fix bleed-over of edp0_hpd_active - not in linux-next yet
> - fix bleed-over of hdmi definition
> - Link to v7: https://lore.kernel.org/r/20250629-tb16-dt-v7-0-35276341338f@oldschoolsolutions.biz
>
> Changes in v7:
> - amended pinctrl order and indents where needed
> - interchanged enable-gpios and select-gpios for usb-sbu-mux as they are
> defined in the dsdt - dp altmode function confirmed in both orientations
> - picked up reviewed-by and acked-by from Dmitry Baryshkob and Rob Herring
> - Link to v6: https://lore.kernel.org/r/20250607-tb16-dt-v6-0-61a31914ee72@oldschoolsolutions.biz
>
> Changes in v6:
> - removed compatible for qcom,sm8550-pmic-glink" in pmic-glink
> - fixed malformed gpu node
> - Link to v5: https://lore.kernel.org/r/20250607-tb16-dt-v5-0-ae493364f525@oldschoolsolutions.biz
>
> Changes in v5:
> - removed patch for the CMN N160JCE-ELL panel, got reviewed
> - re-ordered code in onboard_usb_dev as requested by Dmitry Baryshkov
> - amended device tree with review notes from Dmitry Baryshkov where possible
> and resuting in a working laptop - added notes section
> - Link to v4: https://lore.kernel.org/r/20250524-tb16-dt-v4-0-2c1e6018d3f0@oldschoolsolutions.biz
>
> Changes in v4:
> - squashed Makefile and dts commits to one
> - picked up r-b from Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
> - Link to v3: https://lore.kernel.org/r/20250524-tb16-dt-v3-0-17e26d935e73@oldschoolsolutions.biz
>
> Changes in v3:
> - removed changes in x1e80100.dtsi and x1p42100.dtsi - resolved with [2]
> - fixed schema errors with correct compatible string for the model
> - added power management for the camera via onboard_usb_dev.c
> - amended node ordering
> - changed the panel driver used to edp-panel, added panel in the driver
> - amended x1e80100.dtsi for exposing PM8010: This one is not present in the design,
> added /delete-node/ for it.
> - removed commented-out lines for sdhc, specified which don't work.
> - corrected ZAP shader firmware name
> - Link to v2: https://lore.kernel.org/r/20250516-tb16-dt-v2-0-7c4996d58ed6@oldschoolsolutions.biz
>
> Changes in v2:
> - removed nodes that gave DTC compile errors (pm8010_thermal, edp0_hpd_active)
> - amended qcom.yaml
> - shortened the commit titles to fit 75 chars
> - Link to v1: https://lore.kernel.org/r/20250515-tb16-dt-v1-0-dc5846a25c48@oldschoolsolutions.biz
>
> [2]: 20250520-topic-x1p4_tsens-v2-1-9687b789a4fb@oss.qualcomm.com
>
> ---
> Jens Glathe (4):
> dt-bindings: arm: qcom: Add Lenovo TB16 support
> usb: misc: onboard_usb_dev: Add Bison Electronics Inc. Integrated Camera
> firmware: qcom: scm: Allow QSEECOM on Lenovo Thinkbook 16
> arm64: dts: qcom: Add Lenovo ThinkBook 16 G7 QOY device tree
>
> Documentation/devicetree/bindings/arm/qcom.yaml | 1 +
> arch/arm64/boot/dts/qcom/Makefile | 2 +
> arch/arm64/boot/dts/qcom/x1e80100-pmics.dtsi | 2 +-
> .../boot/dts/qcom/x1p42100-lenovo-thinkbook-16.dts | 1656 ++++++++++++++++++++
> drivers/firmware/qcom/qcom_scm.c | 1 +
> drivers/usb/misc/onboard_usb_dev.c | 2 +
> drivers/usb/misc/onboard_usb_dev.h | 8 +
> 7 files changed, 1671 insertions(+), 1 deletion(-)
> ---
> base-commit: 1343433ed38923a21425c602e92120a1f1db5f7a
> change-id: 20250511-tb16-dt-e84c433d87b1
>
> Best regards,
> --
> Jens Glathe <jens.glathe@oldschoolsolutions.biz>
>
>
>
My bot found new DTB warnings on the .dts files added or changed in this
series.
Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings
are fixed by another series. Ultimately, it is up to the platform
maintainer whether these warnings are acceptable or not. No need to reply
unless the platform maintainer has comments.
If you already ran DT checks and didn't see these error(s), then
make sure dt-schema is up to date:
pip3 install dtschema --upgrade
This patch series was applied (using b4) to base:
Base: using specified base-commit 1343433ed38923a21425c602e92120a1f1db5f7a
If this is not the correct base, please add 'base-commit' tag
(or use b4 which does this automatically)
New warnings running 'make CHECK_DTBS=y for arch/arm64/boot/dts/qcom/' for 20250630-tb16-dt-v8-0-cf42a396e736@oldschoolsolutions.biz:
arch/arm64/boot/dts/qcom/x1p42100-lenovo-thinkbook-16.dtb: pinctrl@f100000 (qcom,x1e80100-tlmm): usb-1-ss0-sbu-state: 'oneOf' conditional failed, one must be fixed:
'function' is a required property
'pins' is a required property
Unevaluated properties are not allowed ('oe-n-pins', 'sel-pins' were unexpected)
Unevaluated properties are not allowed ('bias-pul-up' was unexpected)
from schema $id: http://devicetree.org/schemas/pinctrl/qcom,x1e80100-tlmm.yaml#
arch/arm64/boot/dts/qcom/x1p42100-lenovo-thinkbook-16.dtb: pmic-glink (qcom,x1e80100-pmic-glink): compatible: 'oneOf' conditional failed, one must be fixed:
['qcom,x1e80100-pmic-glink', 'qcom,pmic-glink'] is too short
'qcom,x1e80100-pmic-glink' is not one of ['qcom,qcm6490-pmic-glink', 'qcom,sc8180x-pmic-glink', 'qcom,sc8280xp-pmic-glink', 'qcom,sm8350-pmic-glink', 'qcom,sm8450-pmic-glink', 'qcom,sm8550-pmic-glink']
'qcom,x1e80100-pmic-glink' is not one of ['qcom,sm7325-pmic-glink']
'qcom,qcm6490-pmic-glink' was expected
'qcom,sm8550-pmic-glink' was expected
from schema $id: http://devicetree.org/schemas/soc/qcom/qcom,pmic-glink.yaml#
^ permalink raw reply [flat|nested] 6+ messages in thread