[PATCH 0/4] dt-bindings: display/msm: describe MDSS unit on SC8180X platform

[PATCH 0/4] dt-bindings: display/msm: describe MDSS unit on SC8180X platform

[Dmitry Baryshkov]

SC8180X is one of the last platforms which do not have DT schema for the
display devices. Add DT schema for Mobile Display SubSystem (MDSS) and
Display Processing Unit (DPU) and add SC8180X-compatible to the DSI
controller schema.

While we are at it, also update DT file for SC8180X to follow best
current practices for MDSS devicex description.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
---
Dmitry Baryshkov (4):
      dt-bindings: display/msm: dsi-controller-main: add SC8180X
      dt-bindings: display/msm: describe DPU on SC8180X
      dt-bindings: display/msm: describe MDSS on SC8180X
      arm64: dts: qcom: sc8180x: modernize MDSS device definition

 .../bindings/display/msm/dsi-controller-main.yaml  |   2 +
 .../bindings/display/msm/qcom,sc8180x-dpu.yaml     | 103 ++++++
 .../bindings/display/msm/qcom,sc8180x-mdss.yaml    | 359 +++++++++++++++++++++
 arch/arm64/boot/dts/qcom/sc8180x.dtsi              |  14 +-
 4 files changed, 472 insertions(+), 6 deletions(-)
---
base-commit: 26ffb3d6f02cd0935fb9fa3db897767beee1cb2a
change-id: 20250704-mdss-schema-b56a6f376bf9

Best regards,
-- 
With best wishes
Dmitry

[PATCH 1/4] dt-bindings: display/msm: dsi-controller-main: add SC8180X

[Dmitry Baryshkov]

Describe the SC8180X-specific compatible for the DSI controller persent
on the SoC. While the current DT for SC8180X doesn't use this
compatible, all other platforms were updated to have one. This change
makes SC8180X follow the lead.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
---
 Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml b/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml
index d4bb65c660af8ce8a6bda129a8275c579a705871..4400d4cce07227c2f8938f126c77213b2e4bb9a5 100644
--- a/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml
+++ b/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml
@@ -27,6 +27,7 @@ properties:
               - qcom,sar2130p-dsi-ctrl
               - qcom,sc7180-dsi-ctrl
               - qcom,sc7280-dsi-ctrl
+              - qcom,sc8180x-dsi-ctrl
               - qcom,sdm660-dsi-ctrl
               - qcom,sdm670-dsi-ctrl
               - qcom,sdm845-dsi-ctrl
@@ -332,6 +333,7 @@ allOf:
               - qcom,sar2130p-dsi-ctrl
               - qcom,sc7180-dsi-ctrl
               - qcom,sc7280-dsi-ctrl
+              - qcom,sc8180x-dsi-ctrl
               - qcom,sdm845-dsi-ctrl
               - qcom,sm6115-dsi-ctrl
               - qcom,sm6125-dsi-ctrl

-- 
2.39.5

[PATCH 2/4] dt-bindings: display/msm: describe DPU on SC8180X

[Dmitry Baryshkov]

Describe the Display Processing Unit (DPU) as present on the SC8180X
platform.

Reported-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
---
 .../bindings/display/msm/qcom,sc8180x-dpu.yaml     | 103 +++++++++++++++++++++
 1 file changed, 103 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sc8180x-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sc8180x-dpu.yaml
new file mode 100644
index 0000000000000000000000000000000000000000..a411126708b80f77bde88d7dd1ed49184856969c
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sc8180x-dpu.yaml
@@ -0,0 +1,103 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sc8180x-dpu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SC8180X Display DPU
+
+maintainers:
+  - Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
+
+$ref: /schemas/display/msm/dpu-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,sc8180x-dpu
+
+  reg:
+    items:
+      - description: Address offset and size for mdp register set
+      - description: Address offset and size for vbif register set
+
+  reg-names:
+    items:
+      - const: mdp
+      - const: vbif
+
+  clocks:
+    items:
+      - description: Display AHB clock
+      - description: Display HF AXI clock
+      - description: Display core clock
+      - description: Display vsync clock
+      - description: Display rotator clock
+      - description: Display LUT clock
+
+  clock-names:
+    items:
+      - const: iface
+      - const: bus
+      - const: core
+      - const: vsync
+      - const: rot
+      - const: lut
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,dispcc-sm8250.h>
+    #include <dt-bindings/clock/qcom,gcc-sc8180x.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interconnect/qcom,sc8180x.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    display-controller@ae01000 {
+        compatible = "qcom,sc8180x-dpu";
+        reg = <0x0ae01000 0x8f000>,
+              <0x0aeb0000 0x2008>;
+        reg-names = "mdp", "vbif";
+
+        clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                 <&gcc GCC_DISP_HF_AXI_CLK>,
+                 <&dispcc DISP_CC_MDSS_MDP_CLK>,
+                 <&dispcc DISP_CC_MDSS_VSYNC_CLK>,
+                 <&dispcc DISP_CC_MDSS_ROT_CLK>,
+                 <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>;
+        clock-names = "iface",
+                      "bus",
+                      "core",
+                      "vsync",
+                      "rot",
+                      "lut";
+
+        assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+        assigned-clock-rates = <19200000>;
+
+        operating-points-v2 = <&mdp_opp_table>;
+        power-domains = <&rpmhpd SC8180X_MMCX>;
+
+        interrupt-parent = <&mdss>;
+        interrupts = <0>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                endpoint {
+                    remote-endpoint = <&dsi0_in>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+                endpoint {
+                    remote-endpoint = <&dsi1_in>;
+                };
+            };
+        };
+    };
+...

-- 
2.39.5

[PATCH 3/4] dt-bindings: display/msm: describe MDSS on SC8180X

[Dmitry Baryshkov]

Describe the Mobile Display SubSystem (MDSS) unit as present on the
SC8180X platform.

Reported-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
---
 .../bindings/display/msm/qcom,sc8180x-mdss.yaml    | 359 +++++++++++++++++++++
 1 file changed, 359 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sc8180x-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sc8180x-mdss.yaml
new file mode 100644
index 0000000000000000000000000000000000000000..00e82bdbbcc7e7836918ad6a0414286b6b576150
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sc8180x-mdss.yaml
@@ -0,0 +1,359 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sc8180x-mdss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SC8180X Display MDSS
+
+maintainers:
+  - Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
+
+description:
+  Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates
+  sub-blocks like DPU display controller, DSI and DP interfaces etc. Device tree
+  bindings of MDSS are mentioned for SC8180X target.
+
+$ref: /schemas/display/msm/mdss-common.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: qcom,sc8180x-mdss
+
+  clocks:
+    items:
+      - description: Display AHB clock from gcc
+      - description: Display hf axi clock
+      - description: Display sf axi clock
+      - description: Display core clock
+
+  clock-names:
+    items:
+      - const: iface
+      - const: bus
+      - const: nrt_bus
+      - const: core
+
+  iommus:
+    maxItems: 1
+
+  interconnects:
+    maxItems: 3
+
+  interconnect-names:
+    maxItems: 3
+
+patternProperties:
+  "^display-controller@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        const: qcom,sc8180x-dpu
+
+  "^displayport-controller@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        enum:
+          - qcom,sc8180x-dp
+          - qcom,sc8180x-edp
+
+  "^dsi@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        contains:
+          const: qcom,sc8180x-dsi-ctrl
+
+  "^phy@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        const: qcom,dsi-phy-7nm
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,dispcc-sm8250.h>
+    #include <dt-bindings/clock/qcom,gcc-sc8180x.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interconnect/qcom,sc8180x.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    display-subsystem@ae00000 {
+        compatible = "qcom,sc8180x-mdss";
+        reg = <0x0ae00000 0x1000>;
+        reg-names = "mdss";
+
+        interconnects = <&mmss_noc MASTER_MDP_PORT0 &mc_virt SLAVE_EBI_CH0>,
+                        <&mmss_noc MASTER_MDP_PORT1 &mc_virt SLAVE_EBI_CH0>,
+                        <&gem_noc MASTER_AMPSS_M0 &config_noc SLAVE_DISPLAY_CFG>;
+        interconnect-names = "mdp0-mem",
+                             "mdp1-mem",
+                             "cpu-cfg";
+
+        power-domains = <&dispcc MDSS_GDSC>;
+
+        clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                 <&gcc GCC_DISP_HF_AXI_CLK>,
+                 <&gcc GCC_DISP_SF_AXI_CLK>,
+                 <&dispcc DISP_CC_MDSS_MDP_CLK>;
+        clock-names = "iface", "bus", "nrt_bus", "core";
+
+        interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-controller;
+        #interrupt-cells = <1>;
+
+        iommus = <&apps_smmu 0x800 0x420>;
+
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+
+        display-controller@ae01000 {
+            compatible = "qcom,sc8180x-dpu";
+            reg = <0x0ae01000 0x8f000>,
+                  <0x0aeb0000 0x2008>;
+            reg-names = "mdp", "vbif";
+
+            clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&gcc GCC_DISP_HF_AXI_CLK>,
+                     <&dispcc DISP_CC_MDSS_MDP_CLK>,
+                     <&dispcc DISP_CC_MDSS_VSYNC_CLK>,
+                     <&dispcc DISP_CC_MDSS_ROT_CLK>,
+                     <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>;
+            clock-names = "iface",
+                          "bus",
+                          "core",
+                          "vsync",
+                          "rot",
+                          "lut";
+
+            assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+            assigned-clock-rates = <19200000>;
+
+            operating-points-v2 = <&mdp_opp_table>;
+            power-domains = <&rpmhpd SC8180X_MMCX>;
+
+            interrupt-parent = <&mdss>;
+            interrupts = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dpu_intf1_out: endpoint {
+                        remote-endpoint = <&dsi0_in>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    dpu_intf2_out: endpoint {
+                        remote-endpoint = <&dsi1_in>;
+                    };
+                };
+            };
+
+            mdp_opp_table: opp-table {
+                compatible = "operating-points-v2";
+
+                opp-171428571 {
+                    opp-hz = /bits/ 64 <171428571>;
+                    required-opps = <&rpmhpd_opp_low_svs>;
+                };
+
+                opp-300000000 {
+                    opp-hz = /bits/ 64 <300000000>;
+                    required-opps = <&rpmhpd_opp_svs>;
+                };
+
+                opp-345000000 {
+                    opp-hz = /bits/ 64 <345000000>;
+                    required-opps = <&rpmhpd_opp_svs_l1>;
+                };
+
+                opp-460000000 {
+                    opp-hz = /bits/ 64 <460000000>;
+                    required-opps = <&rpmhpd_opp_nom>;
+                };
+            };
+        };
+
+        dsi@ae94000 {
+            compatible = "qcom,sc8180x-dsi-ctrl",
+                         "qcom,mdss-dsi-ctrl";
+            reg = <0x0ae94000 0x400>;
+            reg-names = "dsi_ctrl";
+
+            interrupt-parent = <&mdss>;
+            interrupts = <4>;
+
+            clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+                     <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+                     <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+                     <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+                     <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&gcc GCC_DISP_HF_AXI_CLK>;
+            clock-names = "byte",
+                          "byte_intf",
+                          "pixel",
+                          "core",
+                          "iface",
+                          "bus";
+
+            assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
+                              <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+            assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>;
+
+            operating-points-v2 = <&dsi_opp_table>;
+            power-domains = <&rpmhpd SC8180X_MMCX>;
+
+            phys = <&dsi0_phy>;
+            phy-names = "dsi";
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dsi0_in: endpoint {
+                        remote-endpoint = <&dpu_intf1_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    dsi0_out: endpoint {
+                    };
+                };
+            };
+
+            dsi_opp_table: opp-table {
+                compatible = "operating-points-v2";
+
+                opp-187500000 {
+                    opp-hz = /bits/ 64 <187500000>;
+                    required-opps = <&rpmhpd_opp_low_svs>;
+                };
+
+                opp-300000000 {
+                    opp-hz = /bits/ 64 <300000000>;
+                    required-opps = <&rpmhpd_opp_svs>;
+                };
+
+                opp-358000000 {
+                    opp-hz = /bits/ 64 <358000000>;
+                    required-opps = <&rpmhpd_opp_svs_l1>;
+                };
+            };
+        };
+
+        dsi0_phy: phy@ae94400 {
+            compatible = "qcom,dsi-phy-7nm";
+            reg = <0x0ae94400 0x200>,
+                  <0x0ae94600 0x280>,
+                  <0x0ae94900 0x260>;
+            reg-names = "dsi_phy",
+                        "dsi_phy_lane",
+                        "dsi_pll";
+
+            #clock-cells = <1>;
+            #phy-cells = <0>;
+
+            clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&rpmhcc RPMH_CXO_CLK>;
+            clock-names = "iface", "ref";
+            vdds-supply = <&vreg_dsi_phy>;
+        };
+
+        dsi@ae96000 {
+            compatible = "qcom,sc8180x-dsi-ctrl",
+                         "qcom,mdss-dsi-ctrl";
+            reg = <0x0ae96000 0x400>;
+            reg-names = "dsi_ctrl";
+
+            interrupt-parent = <&mdss>;
+            interrupts = <5>;
+
+            clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>,
+                     <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>,
+                     <&dispcc DISP_CC_MDSS_PCLK1_CLK>,
+                     <&dispcc DISP_CC_MDSS_ESC1_CLK>,
+                     <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&gcc GCC_DISP_HF_AXI_CLK>;
+            clock-names = "byte",
+                          "byte_intf",
+                          "pixel",
+                          "core",
+                          "iface",
+                          "bus";
+
+            assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>,
+                              <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>;
+            assigned-clock-parents = <&dsi1_phy 0>, <&dsi1_phy 1>;
+
+            operating-points-v2 = <&dsi_opp_table>;
+            power-domains = <&rpmhpd SC8180X_MMCX>;
+
+            phys = <&dsi1_phy>;
+            phy-names = "dsi";
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dsi1_in: endpoint {
+                        remote-endpoint = <&dpu_intf2_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    dsi1_out: endpoint {
+                    };
+                };
+            };
+        };
+
+        dsi1_phy: phy@ae96400 {
+            compatible = "qcom,dsi-phy-7nm";
+            reg = <0x0ae96400 0x200>,
+                  <0x0ae96600 0x280>,
+                  <0x0ae96900 0x260>;
+            reg-names = "dsi_phy",
+                        "dsi_phy_lane",
+                        "dsi_pll";
+
+            #clock-cells = <1>;
+            #phy-cells = <0>;
+
+            clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&rpmhcc RPMH_CXO_CLK>;
+            clock-names = "iface", "ref";
+            vdds-supply = <&vreg_dsi_phy>;
+        };
+    };
+...

-- 
2.39.5

[PATCH 4/4] arm64: dts: qcom: sc8180x: modernize MDSS device definition

[Dmitry Baryshkov]

Follow the lead of other platforms and update DT description of the MDSS
device:

- Use generic node names (dislpay-subsystem, display-controller, phy)
  instead of the platform-specific ones (mdss, mdp, dsi-phy)
- Add platform-specific compatible string to DSI controllers.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
---
 arch/arm64/boot/dts/qcom/sc8180x.dtsi | 14 ++++++++------
 1 file changed, 8 insertions(+), 6 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sc8180x.dtsi b/arch/arm64/boot/dts/qcom/sc8180x.dtsi
index b74ce3175d209b569e634073662307964158b340..14775b8dc682221ada3d30773be66edb46138662 100644
--- a/arch/arm64/boot/dts/qcom/sc8180x.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc8180x.dtsi
@@ -2956,7 +2956,7 @@ camcc: clock-controller@ad00000 {
 			#power-domain-cells = <1>;
 		};
 
-		mdss: mdss@ae00000 {
+		mdss: display-subsystem@ae00000 {
 			compatible = "qcom,sc8180x-mdss";
 			reg = <0 0x0ae00000 0 0x1000>;
 			reg-names = "mdss";
@@ -2996,7 +2996,7 @@ &mc_virt SLAVE_EBI_CH0 QCOM_ICC_TAG_ALWAYS>,
 
 			status = "disabled";
 
-			mdss_mdp: mdp@ae01000 {
+			mdss_mdp: display-controller@ae01000 {
 				compatible = "qcom,sc8180x-dpu";
 				reg = <0 0x0ae01000 0 0x8f000>,
 				      <0 0x0aeb0000 0 0x3000>;
@@ -3090,7 +3090,8 @@ opp-460000000 {
 			};
 
 			mdss_dsi0: dsi@ae94000 {
-				compatible = "qcom,mdss-dsi-ctrl";
+				compatible = "qcom,sc8180x-dsi-ctrl",
+					     "qcom,mdss-dsi-ctrl";
 				reg = <0 0x0ae94000 0 0x400>;
 				reg-names = "dsi_ctrl";
 
@@ -3156,7 +3157,7 @@ opp-358000000 {
 				};
 			};
 
-			mdss_dsi0_phy: dsi-phy@ae94400 {
+			mdss_dsi0_phy: phy@ae94400 {
 				compatible = "qcom,dsi-phy-7nm";
 				reg = <0 0x0ae94400 0 0x200>,
 				      <0 0x0ae94600 0 0x280>,
@@ -3176,7 +3177,8 @@ mdss_dsi0_phy: dsi-phy@ae94400 {
 			};
 
 			mdss_dsi1: dsi@ae96000 {
-				compatible = "qcom,mdss-dsi-ctrl";
+				compatible = "qcom,sc8180x-dsi-ctrl",
+					     "qcom,mdss-dsi-ctrl";
 				reg = <0 0x0ae96000 0 0x400>;
 				reg-names = "dsi_ctrl";
 
@@ -3223,7 +3225,7 @@ mdss_dsi1_out: endpoint {
 				};
 			};
 
-			mdss_dsi1_phy: dsi-phy@ae96400 {
+			mdss_dsi1_phy: phy@ae96400 {
 				compatible = "qcom,dsi-phy-7nm";
 				reg = <0 0x0ae96400 0 0x200>,
 				      <0 0x0ae96600 0 0x280>,

-- 
2.39.5

Re: [PATCH 4/4] arm64: dts: qcom: sc8180x: modernize MDSS device definition

[Konrad Dybcio]

On 7/4/25 6:31 PM, Dmitry Baryshkov wrote:
> Follow the lead of other platforms and update DT description of the MDSS
> device:
> 
> - Use generic node names (dislpay-subsystem, display-controller, phy)
>   instead of the platform-specific ones (mdss, mdp, dsi-phy)
> - Add platform-specific compatible string to DSI controllers.
> 
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
> ---

Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>

Konrad

Re: [PATCH 1/4] dt-bindings: display/msm: dsi-controller-main: add SC8180X

[Rob Herring (Arm)]

On Fri, 04 Jul 2025 19:31:53 +0300, Dmitry Baryshkov wrote:
> Describe the SC8180X-specific compatible for the DSI controller persent
> on the SoC. While the current DT for SC8180X doesn't use this
> compatible, all other platforms were updated to have one. This change
> makes SC8180X follow the lead.
> 
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
> ---
>  Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml | 2 ++
>  1 file changed, 2 insertions(+)
> 

Acked-by: Rob Herring (Arm) <robh@kernel.org>

Re: [PATCH 2/4] dt-bindings: display/msm: describe DPU on SC8180X

[Rob Herring (Arm)]

On Fri, 04 Jul 2025 19:31:54 +0300, Dmitry Baryshkov wrote:
> Describe the Display Processing Unit (DPU) as present on the SC8180X
> platform.
> 
> Reported-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
> ---
>  .../bindings/display/msm/qcom,sc8180x-dpu.yaml     | 103 +++++++++++++++++++++
>  1 file changed, 103 insertions(+)
> 

Reviewed-by: Rob Herring (Arm) <robh@kernel.org>

Re: [PATCH 3/4] dt-bindings: display/msm: describe MDSS on SC8180X

[Rob Herring (Arm)]

On Fri, 04 Jul 2025 19:31:55 +0300, Dmitry Baryshkov wrote:
> Describe the Mobile Display SubSystem (MDSS) unit as present on the
> SC8180X platform.
> 
> Reported-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
> ---
>  .../bindings/display/msm/qcom,sc8180x-mdss.yaml    | 359 +++++++++++++++++++++
>  1 file changed, 359 insertions(+)
> 

Reviewed-by: Rob Herring (Arm) <robh@kernel.org>

Re: (subset) [PATCH 0/4] dt-bindings: display/msm: describe MDSS unit on SC8180X platform

[Bjorn Andersson]

On Fri, 04 Jul 2025 19:31:52 +0300, Dmitry Baryshkov wrote:
> SC8180X is one of the last platforms which do not have DT schema for the
> display devices. Add DT schema for Mobile Display SubSystem (MDSS) and
> Display Processing Unit (DPU) and add SC8180X-compatible to the DSI
> controller schema.
> 
> While we are at it, also update DT file for SC8180X to follow best
> current practices for MDSS devicex description.
> 
> [...]

Applied, thanks!

[4/4] arm64: dts: qcom: sc8180x: modernize MDSS device definition
      commit: 340e57306a4aeaaa64f294553caa25453cc4c48d

Best regards,
-- 
Bjorn Andersson <andersson@kernel.org>