[PATCH v7 07/15] arm64: dts: qcom: x1e80100: Add CCI definitions

[Bryan O'Donoghue <bryan.odonoghue@linaro.org>]

Add in two CCI buses.

One bus has two CCI bus master pinouts:
cci_i2c_sda0 = gpio101
cci_i2c_scl0 = gpio102

cci_i2c_sda1 = gpio103
cci_i2c_scl1 = gpio104

The second bus has two CCI bus master pinouts:
cci_i2c_sda2 = gpio105
cci_i2c_scl2 = gpio106

aon_cci_i2c_sda3 = gpio235
aon_cci_i2c_scl3 = gpio236

Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
---
 arch/arm64/boot/dts/qcom/x1e80100.dtsi | 150 +++++++++++++++++++++++++++++++++
 1 file changed, 150 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/x1e80100.dtsi b/arch/arm64/boot/dts/qcom/x1e80100.dtsi
index 1dff82692ff6702c5577ae9e693ce3f7ea215eee..41245e8592f78edf141141f2f5b7c5b841318f46 100644
--- a/arch/arm64/boot/dts/qcom/x1e80100.dtsi
+++ b/arch/arm64/boot/dts/qcom/x1e80100.dtsi
@@ -5166,6 +5166,84 @@ usb_1_ss1_dwc3_ss: endpoint {
 			};
 		};
 
+		cci0: cci@ac15000 {
+			compatible = "qcom,x1e80100-cci", "qcom,msm8996-cci";
+			reg = <0 0x0ac15000 0 0x1000>;
+
+			interrupts = <GIC_SPI 460 IRQ_TYPE_EDGE_RISING>;
+
+			clocks = <&camcc CAM_CC_CAMNOC_AXI_RT_CLK>,
+				 <&camcc CAM_CC_CPAS_AHB_CLK>,
+				 <&camcc CAM_CC_CCI_0_CLK>;
+			clock-names = "camnoc_axi",
+				      "cpas_ahb",
+				      "cci";
+
+			power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>;
+
+			pinctrl-0 = <&cci0_default>;
+			pinctrl-1 = <&cci0_sleep>;
+			pinctrl-names = "default", "sleep";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+
+			cci0_i2c0: i2c-bus@0 {
+				reg = <0>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			cci0_i2c1: i2c-bus@1 {
+				reg = <1>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		cci1: cci@ac16000 {
+			compatible = "qcom,x1e80100-cci", "qcom,msm8996-cci";
+			reg = <0 0x0ac16000 0 0x1000>;
+
+			interrupts = <GIC_SPI 271 IRQ_TYPE_EDGE_RISING>;
+
+			clocks = <&camcc CAM_CC_CAMNOC_AXI_RT_CLK>,
+				 <&camcc CAM_CC_CPAS_AHB_CLK>,
+				 <&camcc CAM_CC_CCI_1_CLK>;
+			clock-names = "camnoc_axi",
+				      "cpas_ahb",
+				      "cci";
+
+			power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>;
+
+			pinctrl-0 = <&cci1_default>;
+			pinctrl-1 = <&cci1_sleep>;
+			pinctrl-names = "default", "sleep";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+
+			cci1_i2c0: i2c-bus@0 {
+				reg = <0>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			cci1_i2c1: i2c-bus@1 {
+				reg = <1>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
 		camcc: clock-controller@ade0000 {
 			compatible = "qcom,x1e80100-camcc";
 			reg = <0 0x0ade0000 0 0x20000>;
@@ -5790,6 +5868,78 @@ tlmm: pinctrl@f100000 {
 			gpio-ranges = <&tlmm 0 0 239>;
 			wakeup-parent = <&pdc>;
 
+			cci0_default: cci0-default-state {
+				cci0_i2c0_default: cci0-i2c0-default-pins {
+					/* cci_i2c_sda0, cci_i2c_scl0 */
+					pins = "gpio101", "gpio102";
+					function = "cci_i2c";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+
+				cci0_i2c1_default: cci0-i2c1-default-pins {
+					/* cci_i2c_sda1, cci_i2c_scl1 */
+					pins = "gpio103", "gpio104";
+					function = "cci_i2c";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
+
+			cci0_sleep: cci0-sleep-state {
+				cci0_i2c0_sleep: cci0-i2c0-sleep-pins {
+					/* cci_i2c_sda0, cci_i2c_scl0 */
+					pins = "gpio101", "gpio102";
+					function = "cci_i2c";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+
+				cci0_i2c1_sleep: cci0-i2c1-sleep-pins {
+					/* cci_i2c_sda1, cci_i2c_scl1 */
+					pins = "gpio103", "gpio104";
+					function = "cci_i2c";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+			};
+
+			cci1_default: cci1-default-state {
+				cci1_i2c0_default: cci1-i2c0-default-pins {
+					/* cci_i2c_sda2, cci_i2c_scl2 */
+					pins = "gpio105","gpio106";
+					function = "cci_i2c";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+
+				cci1_i2c1_default: cci1-i2c1-default-pins {
+					/* aon_cci_i2c_sda3, aon_cci_i2c_scl3 */
+					pins = "gpio235","gpio236";
+					function = "aon_cci";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
+
+			cci1_sleep: cci1-sleep-state {
+				cci1_i2c0_sleep: cci1-i2c0-sleep-pins {
+					/* cci_i2c_sda2, cci_i2c_scl2 */
+					pins = "gpio105","gpio106";
+					function = "cci_i2c";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+
+				cci1_i2c1_sleep: cci1-i2c1-sleep-pins {
+					/* aon_cci_i2c_sda3, aon_cci_i2c_scl3 */
+					pins = "gpio235","gpio236";
+					function = "aon_cci";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+			};
+
 			qup_i2c0_data_clk: qup-i2c0-data-clk-state {
 				/* SDA, SCL */
 				pins = "gpio0", "gpio1";

-- 
2.49.0