[PATCH net-next v2 0/3] Add shared PHY counter support for QCA807x and QCA808x

[PATCH net-next v2 0/3] Add shared PHY counter support for QCA807x and QCA808x

[Luo Jie]

The implementation of the PHY counter is identical for both QCA808x and
QCA807x series devices. This includes counters for both good and bad CRC
frames in the RX and TX directions, which are active when CRC checking
is enabled.

This patch series introduces PHY counter functions into a shared library,
enabling counter support for the QCA808x and QCA807x families through this
common infrastructure. Additionally, enable CRC checking and configure
automatic clearing of counters after reading within config_init() to ensure
accurate counter recording.

Signed-off-by: Luo Jie <quic_luoj@quicinc.com>
---
Changes in v2:
- Update to use the standardized PHY statistics framework.
- Enabled automatic clearing of counters following each read operation,
  ensuring support for 64-bit statistics.
- Link to v1: https://lore.kernel.org/r/20250709-qcom_phy_counter-v1-0-93a54a029c46@quicinc.com

---
Luo Jie (3):
      net: phy: qcom: Add PHY counter support
      net: phy: qcom: qca808x: Support PHY counter
      net: phy: qcom: qca807x: Support PHY counter

 drivers/net/phy/qcom/qca807x.c      | 25 +++++++++++++
 drivers/net/phy/qcom/qca808x.c      | 23 ++++++++++++
 drivers/net/phy/qcom/qcom-phy-lib.c | 74 +++++++++++++++++++++++++++++++++++++
 drivers/net/phy/qcom/qcom.h         | 23 ++++++++++++
 4 files changed, 145 insertions(+)
---
base-commit: b06c4311711c57c5e558bd29824b08f0a6e2a155
change-id: 20250709-qcom_phy_counter-49fe93241fdd

Best regards,
-- 
Luo Jie <quic_luoj@quicinc.com>

[PATCH net-next v2 1/3] net: phy: qcom: Add PHY counter support

[Luo Jie]

Add PHY counter functionality to the shared library. The implementation
is identical for the current QCA807X and QCA808X PHYs.

The PHY counter can be configured to perform CRC checking for both received
and transmitted packets. Additionally, the packet counter can be set to
automatically clear after it is read.

The PHY counter includes 32-bit packet counters for both RX (received) and
TX (transmitted) packets, as well as 16-bit counters for recording CRC
error packets for both RX and TX.

Signed-off-by: Luo Jie <quic_luoj@quicinc.com>
---
 drivers/net/phy/qcom/qcom-phy-lib.c | 74 +++++++++++++++++++++++++++++++++++++
 drivers/net/phy/qcom/qcom.h         | 23 ++++++++++++
 2 files changed, 97 insertions(+)

diff --git a/drivers/net/phy/qcom/qcom-phy-lib.c b/drivers/net/phy/qcom/qcom-phy-lib.c
index af7d0d8e81be..50cc675bc602 100644
--- a/drivers/net/phy/qcom/qcom-phy-lib.c
+++ b/drivers/net/phy/qcom/qcom-phy-lib.c
@@ -699,3 +699,77 @@ int qca808x_led_reg_blink_set(struct phy_device *phydev, u16 reg,
 	return 0;
 }
 EXPORT_SYMBOL_GPL(qca808x_led_reg_blink_set);
+
+/* Enable CRC checking for both received and transmitted frames to ensure
+ * accurate counter recording. The hardware supports a 32-bit counter,
+ * configure the counter to clear after it is read to facilitate the
+ * implementation of a 64-bit software counter
+ */
+int qcom_phy_counter_config(struct phy_device *phydev)
+{
+	return phy_set_bits_mmd(phydev, MDIO_MMD_AN, QCA808X_MMD7_CNT_CTRL,
+				QCA808X_MMD7_CNT_CTRL_CRC_CHECK_EN |
+				QCA808X_MMD7_CNT_CTRL_READ_CLEAR_EN);
+}
+EXPORT_SYMBOL_GPL(qcom_phy_counter_config);
+
+int qcom_phy_update_stats(struct phy_device *phydev,
+			  struct qcom_phy_hw_stats *hw_stats)
+{
+	int ret;
+	u32 cnt;
+
+	/* PHY 32-bit counter for RX packets. */
+	ret = phy_read_mmd(phydev, MDIO_MMD_AN, QCA808X_MMD7_CNT_RX_PKT_15_0);
+	if (ret < 0)
+		return ret;
+
+	cnt = ret;
+
+	ret = phy_read_mmd(phydev, MDIO_MMD_AN, QCA808X_MMD7_CNT_RX_PKT_31_16);
+	if (ret < 0)
+		return ret;
+
+	cnt |= ret << 16;
+	hw_stats->rx_pkts += cnt;
+
+	/* PHY 16-bit counter for RX CRC error packets. */
+	ret = phy_read_mmd(phydev, MDIO_MMD_AN, QCA808X_MMD7_CNT_RX_ERR_PKT);
+	if (ret < 0)
+		return ret;
+
+	hw_stats->rx_err_pkts += ret;
+
+	/* PHY 32-bit counter for TX packets. */
+	ret = phy_read_mmd(phydev, MDIO_MMD_AN, QCA808X_MMD7_CNT_TX_PKT_15_0);
+	if (ret < 0)
+		return ret;
+
+	cnt = ret;
+
+	ret = phy_read_mmd(phydev, MDIO_MMD_AN, QCA808X_MMD7_CNT_TX_PKT_31_16);
+	if (ret < 0)
+		return ret;
+
+	cnt |= ret << 16;
+	hw_stats->tx_pkts += cnt;
+
+	/* PHY 16-bit counter for TX CRC error packets. */
+	ret = phy_read_mmd(phydev, MDIO_MMD_AN, QCA808X_MMD7_CNT_TX_ERR_PKT);
+	if (ret < 0)
+		return ret;
+
+	hw_stats->tx_err_pkts += ret;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(qcom_phy_update_stats);
+
+void qcom_phy_get_stats(struct ethtool_phy_stats *stats,
+			struct qcom_phy_hw_stats hw_stats)
+{
+	stats->tx_packets = hw_stats.tx_pkts;
+	stats->tx_errors = hw_stats.tx_err_pkts;
+	stats->rx_packets = hw_stats.rx_pkts;
+	stats->rx_errors = hw_stats.rx_err_pkts;
+}
diff --git a/drivers/net/phy/qcom/qcom.h b/drivers/net/phy/qcom/qcom.h
index 7f7151c8baca..5071e7149a11 100644
--- a/drivers/net/phy/qcom/qcom.h
+++ b/drivers/net/phy/qcom/qcom.h
@@ -195,6 +195,17 @@
 #define AT803X_MIN_DOWNSHIFT			2
 #define AT803X_MAX_DOWNSHIFT			9
 
+#define QCA808X_MMD7_CNT_CTRL			0x8029
+#define QCA808X_MMD7_CNT_CTRL_READ_CLEAR_EN	BIT(1)
+#define QCA808X_MMD7_CNT_CTRL_CRC_CHECK_EN	BIT(0)
+
+#define QCA808X_MMD7_CNT_RX_PKT_31_16		0x802a
+#define QCA808X_MMD7_CNT_RX_PKT_15_0		0x802b
+#define QCA808X_MMD7_CNT_RX_ERR_PKT		0x802c
+#define QCA808X_MMD7_CNT_TX_PKT_31_16		0x802d
+#define QCA808X_MMD7_CNT_TX_PKT_15_0		0x802e
+#define QCA808X_MMD7_CNT_TX_ERR_PKT		0x802f
+
 enum stat_access_type {
 	PHY,
 	MMD
@@ -212,6 +223,13 @@ struct at803x_ss_mask {
 	u8 speed_shift;
 };
 
+struct qcom_phy_hw_stats {
+	u64 rx_pkts;
+	u64 rx_err_pkts;
+	u64 tx_pkts;
+	u64 tx_err_pkts;
+};
+
 int at803x_debug_reg_read(struct phy_device *phydev, u16 reg);
 int at803x_debug_reg_mask(struct phy_device *phydev, u16 reg,
 			  u16 clear, u16 set);
@@ -246,3 +264,8 @@ int qca808x_led_reg_brightness_set(struct phy_device *phydev,
 int qca808x_led_reg_blink_set(struct phy_device *phydev, u16 reg,
 			      unsigned long *delay_on,
 			      unsigned long *delay_off);
+int qcom_phy_counter_config(struct phy_device *phydev);
+int qcom_phy_update_stats(struct phy_device *phydev,
+			  struct qcom_phy_hw_stats *hw_stats);
+void qcom_phy_get_stats(struct ethtool_phy_stats *stats,
+			struct qcom_phy_hw_stats hw_stats);

-- 
2.34.1

[PATCH net-next v2 2/3] net: phy: qcom: qca808x: Support PHY counter

[Luo Jie]

Enable CRC checking for received and transmitted frames, and configure
counters to clear after being read within config_init() for accurate
counter recording. Additionally, add PHY counter operations and integrate
shared functions.

Signed-off-by: Luo Jie <quic_luoj@quicinc.com>
---
 drivers/net/phy/qcom/qca808x.c | 23 +++++++++++++++++++++++
 1 file changed, 23 insertions(+)

diff --git a/drivers/net/phy/qcom/qca808x.c b/drivers/net/phy/qcom/qca808x.c
index 6de16c0eaa08..8eb51b1a006c 100644
--- a/drivers/net/phy/qcom/qca808x.c
+++ b/drivers/net/phy/qcom/qca808x.c
@@ -93,6 +93,7 @@ MODULE_LICENSE("GPL");
 
 struct qca808x_priv {
 	int led_polarity_mode;
+	struct qcom_phy_hw_stats hw_stats;
 };
 
 static int qca808x_phy_fast_retrain_config(struct phy_device *phydev)
@@ -243,6 +244,10 @@ static int qca808x_config_init(struct phy_device *phydev)
 
 	qca808x_fill_possible_interfaces(phydev);
 
+	ret = qcom_phy_counter_config(phydev);
+	if (ret)
+		return ret;
+
 	/* Configure adc threshold as 100mv for the link 10M */
 	return at803x_debug_reg_mask(phydev, QCA808X_PHY_DEBUG_ADC_THRESHOLD,
 				     QCA808X_ADC_THRESHOLD_MASK,
@@ -622,6 +627,22 @@ static int qca808x_led_polarity_set(struct phy_device *phydev, int index,
 			      active_low ? 0 : QCA808X_LED_ACTIVE_HIGH);
 }
 
+static int qca808x_update_stats(struct phy_device *phydev)
+{
+	struct qca808x_priv *priv = phydev->priv;
+
+	return qcom_phy_update_stats(phydev, &priv->hw_stats);
+}
+
+static void qca808x_get_phy_stats(struct phy_device *phydev,
+				  struct ethtool_eth_phy_stats *eth_stats,
+				  struct ethtool_phy_stats *stats)
+{
+	struct qca808x_priv *priv = phydev->priv;
+
+	qcom_phy_get_stats(stats, priv->hw_stats);
+}
+
 static struct phy_driver qca808x_driver[] = {
 {
 	/* Qualcomm QCA8081 */
@@ -651,6 +672,8 @@ static struct phy_driver qca808x_driver[] = {
 	.led_hw_control_set	= qca808x_led_hw_control_set,
 	.led_hw_control_get	= qca808x_led_hw_control_get,
 	.led_polarity_set	= qca808x_led_polarity_set,
+	.update_stats		= qca808x_update_stats,
+	.get_phy_stats		= qca808x_get_phy_stats,
 }, };
 
 module_phy_driver(qca808x_driver);

-- 
2.34.1

[PATCH net-next v2 3/3] net: phy: qcom: qca807x: Support PHY counter

[Luo Jie]

Within the QCA807X PHY operation's config_init() function, enable CRC
checking for received and transmitted frames and configure counter to
clear after being read to support counter recording. Additionally, add
support for PHY counter operations.

Signed-off-by: Luo Jie <quic_luoj@quicinc.com>
---
 drivers/net/phy/qcom/qca807x.c | 25 +++++++++++++++++++++++++
 1 file changed, 25 insertions(+)

diff --git a/drivers/net/phy/qcom/qca807x.c b/drivers/net/phy/qcom/qca807x.c
index 6d10ef7e9a8a..291f052ea53c 100644
--- a/drivers/net/phy/qcom/qca807x.c
+++ b/drivers/net/phy/qcom/qca807x.c
@@ -124,6 +124,7 @@ struct qca807x_priv {
 	bool dac_full_amplitude;
 	bool dac_full_bias_current;
 	bool dac_disable_bias_current_tweak;
+	struct qcom_phy_hw_stats hw_stats;
 };
 
 static int qca807x_cable_test_start(struct phy_device *phydev)
@@ -768,6 +769,10 @@ static int qca807x_config_init(struct phy_device *phydev)
 			return ret;
 	}
 
+	ret = qcom_phy_counter_config(phydev);
+	if (ret)
+		return ret;
+
 	control_dac = phy_read_mmd(phydev, MDIO_MMD_AN,
 				   QCA807X_MMD7_1000BASE_T_POWER_SAVE_PER_CABLE_LENGTH);
 	control_dac &= ~QCA807X_CONTROL_DAC_MASK;
@@ -782,6 +787,22 @@ static int qca807x_config_init(struct phy_device *phydev)
 			     control_dac);
 }
 
+static int qca807x_update_stats(struct phy_device *phydev)
+{
+	struct qca807x_priv *priv = phydev->priv;
+
+	return qcom_phy_update_stats(phydev, &priv->hw_stats);
+}
+
+static void qca807x_get_phy_stats(struct phy_device *phydev,
+				  struct ethtool_eth_phy_stats *eth_stats,
+				  struct ethtool_phy_stats *stats)
+{
+	struct qca807x_priv *priv = phydev->priv;
+
+	qcom_phy_get_stats(stats, priv->hw_stats);
+}
+
 static struct phy_driver qca807x_drivers[] = {
 	{
 		PHY_ID_MATCH_EXACT(PHY_ID_QCA8072),
@@ -800,6 +821,8 @@ static struct phy_driver qca807x_drivers[] = {
 		.suspend	= genphy_suspend,
 		.cable_test_start	= qca807x_cable_test_start,
 		.cable_test_get_status	= qca808x_cable_test_get_status,
+		.update_stats		= qca807x_update_stats,
+		.get_phy_stats		= qca807x_get_phy_stats,
 	},
 	{
 		PHY_ID_MATCH_EXACT(PHY_ID_QCA8075),
@@ -823,6 +846,8 @@ static struct phy_driver qca807x_drivers[] = {
 		.led_hw_is_supported = qca807x_led_hw_is_supported,
 		.led_hw_control_set = qca807x_led_hw_control_set,
 		.led_hw_control_get = qca807x_led_hw_control_get,
+		.update_stats		= qca807x_update_stats,
+		.get_phy_stats		= qca807x_get_phy_stats,
 	},
 };
 module_phy_driver(qca807x_drivers);

-- 
2.34.1

Re: [PATCH net-next v2 2/3] net: phy: qcom: qca808x: Support PHY counter

[kernel test robot]

Hi Luo,

kernel test robot noticed the following build errors:

[auto build test ERROR on b06c4311711c57c5e558bd29824b08f0a6e2a155]

url:    https://github.com/intel-lab-lkp/linux/commits/Luo-Jie/net-phy-qcom-Add-PHY-counter-support/20250714-230346
base:   b06c4311711c57c5e558bd29824b08f0a6e2a155
patch link:    https://lore.kernel.org/r/20250714-qcom_phy_counter-v2-2-94dde9d9769f%40quicinc.com
patch subject: [PATCH net-next v2 2/3] net: phy: qcom: qca808x: Support PHY counter
config: i386-buildonly-randconfig-003-20250715 (https://download.01.org/0day-ci/archive/20250715/202507151542.rdmfnV5H-lkp@intel.com/config)
compiler: gcc-12 (Debian 12.2.0-14+deb12u1) 12.2.0
reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20250715/202507151542.rdmfnV5H-lkp@intel.com/reproduce)

If you fix the issue in a separate patch/commit (i.e. not just a new version of
the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <lkp@intel.com>
| Closes: https://lore.kernel.org/oe-kbuild-all/202507151542.rdmfnV5H-lkp@intel.com/

All errors (new ones prefixed by >>, old ones prefixed by <<):

>> ERROR: modpost: "qcom_phy_get_stats" [drivers/net/phy/qcom/qca808x.ko] undefined!

-- 
0-DAY CI Kernel Test Service
https://github.com/intel/lkp-tests/wiki