[PATCH 6/6] wifi: ath10k: Use pci_{enable/disable}_link_state() APIs to enable/disable ASPM states

[Manivannan Sadhasivam via B4 Relay <devnull+manivannan.sadhasivam.oss.qualcomm.com@kernel.org>]

From: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>

It is not recommended to enable/disable the ASPM states on the back of the
PCI core directly using the LNKCTL register. It will break the PCI core's
knowledge about the device ASPM states. So use the APIs exposed by the PCI
core to enable/disable ASPM states.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/pci.c | 7 ++-----
 1 file changed, 2 insertions(+), 5 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c
index 1e6d43285138ece619b9d7dc49f113a439e2085d..b20ab535a850ef1f5fe606bd7e7a230ebcd894c8 100644
--- a/drivers/net/wireless/ath/ath10k/pci.c
+++ b/drivers/net/wireless/ath/ath10k/pci.c
@@ -1965,9 +1965,7 @@ static int ath10k_pci_hif_start(struct ath10k *ar)
 	ath10k_pci_irq_enable(ar);
 	ath10k_pci_rx_post(ar);
 
-	pcie_capability_clear_and_set_word(ar_pci->pdev, PCI_EXP_LNKCTL,
-					   PCI_EXP_LNKCTL_ASPMC,
-					   ar_pci->link_ctl & PCI_EXP_LNKCTL_ASPMC);
+	pci_enable_link_state(ar_pci->pdev, ath_pci_aspm_state(ar_pci->link_ctl));
 
 	return 0;
 }
@@ -2824,8 +2822,7 @@ static int ath10k_pci_hif_power_up(struct ath10k *ar,
 
 	pcie_capability_read_word(ar_pci->pdev, PCI_EXP_LNKCTL,
 				  &ar_pci->link_ctl);
-	pcie_capability_clear_word(ar_pci->pdev, PCI_EXP_LNKCTL,
-				   PCI_EXP_LNKCTL_ASPMC);
+	pci_disable_link_state(ar_pci->pdev, PCIE_LINK_STATE_L0S | PCIE_LINK_STATE_L1);
 
 	/*
 	 * Bring the target up cleanly.

-- 
2.45.2