[PATCH v7 0/4] Enable cpufreq for IPQ5424

[PATCH v7 0/4] Enable cpufreq for IPQ5424

[Varadarajan Narayanan]

CPU on Qualcomm ipq5424 is clocked by huayra PLL with RCG support.
Add support for the APSS PLL, RCG and clock enable for ipq5424.
The PLL, RCG register space are clubbed. Hence adding new APSS driver
for both PLL and RCG/CBC control. Also the L3 cache has a separate pll
modeled as ICC clock. The L3 pll needs to be scaled along with the CPU.

v7: Fix 'Reviewed-by' placement for bindings patch
    Use enum instead of clock names for l3 pll
    Select IPQ_APSS_5424 if IPQ_GCC_5424 is enabled

v6: https://lore.kernel.org/linux-arm-msm/20250806112807.2726890-1-quic_varada@quicinc.com/
	* Drop clock-names in bindings, dts and driver and use index instead
	* Fix 'opp-microvolt'

v5: https://lore.kernel.org/linux-arm-msm/20250804112041.845135-1-quic_varada@quicinc.com/
	* Remove previous maintainers from bindings file
	* Use enums instead of clock names in clock struct
	* Add '.sync_state = icc_sync_state'
	* Add opp-816000000

v4: https://lore.kernel.org/linux-arm-msm/20250730081316.547796-1-quic_varada@quicinc.com/
	* Address bindings related comments

v3: https://lore.kernel.org/linux-arm-msm/20250724102540.3762358-1-quic_varada@quicinc.com/
	* Use the qcom_cc_driver_data framework to trim down apss_ipq5424_probe

v2: https://lore.kernel.org/linux-arm-msm/20250723110815.2865403-1-quic_varada@quicinc.com/
	* Use icc-clk framework for l3 pll

v1: https://lore.kernel.org/linux-arm-msm/20250127093128.2611247-1-quic_srichara@quicinc.com/

Md Sadre Alam (1):
  cpufreq: qcom-nvmem: Enable cpufreq for ipq5424

Sricharan Ramabadhran (3):
  dt-bindings: clock: ipq5424-apss-clk: Add ipq5424 apss clock
    controller
  clk: qcom: apss-ipq5424: Add ipq5424 apss clock controller
  arm64: dts: qcom: ipq5424: Enable cpufreq

 .../bindings/clock/qcom,ipq5424-apss-clk.yaml |  55 ++++
 arch/arm64/boot/dts/qcom/ipq5424.dtsi         |  69 +++++
 drivers/clk/qcom/Kconfig                      |   9 +
 drivers/clk/qcom/Makefile                     |   1 +
 drivers/clk/qcom/apss-ipq5424.c               | 265 ++++++++++++++++++
 drivers/cpufreq/cpufreq-dt-platdev.c          |   1 +
 drivers/cpufreq/qcom-cpufreq-nvmem.c          |   5 +
 include/dt-bindings/clock/qcom,apss-ipq.h     |   6 +
 .../dt-bindings/interconnect/qcom,ipq5424.h   |   3 +
 9 files changed, 414 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/clock/qcom,ipq5424-apss-clk.yaml
 create mode 100644 drivers/clk/qcom/apss-ipq5424.c


base-commit: b1549501188cc9eba732c25b033df7a53ccc341f
-- 
2.34.1

[PATCH v7 1/4] dt-bindings: clock: ipq5424-apss-clk: Add ipq5424 apss clock controller

[Varadarajan Narayanan]

From: Sricharan Ramabadhran <quic_srichara@quicinc.com>

The CPU core in ipq5424 is clocked by a huayra PLL with RCG support.
The RCG and PLL have a separate register space from the GCC.
Also the L3 cache has a separate pll and needs to be scaled along
with the CPU.

Co-developed-by: Md Sadre Alam <quic_mdalam@quicinc.com>
Signed-off-by: Md Sadre Alam <quic_mdalam@quicinc.com>
Signed-off-by: Sricharan Ramabadhran <quic_srichara@quicinc.com>
[ Added interconnect related changes ]
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
---
v7: Fix 'Reviewed-by' placement

v6: Add 'Reviewed-by: Krzysztof Kozlowski'
    Drop 'clock-names'

v5: Remove previous maintainers
    Change clock@fa80000 to clock-controller@fa80000 in example
    Have one item per line for clocks and clock-names in example

v4: Add self to 'maintainers'
    s/gpll0/clk_ref/ in clock-names
    s/apss-clock/clock/ in example's node name

v2: Add #interconnect-cells to help enable L3 pll as ICC clock
    Add master/slave ids
---
 .../bindings/clock/qcom,ipq5424-apss-clk.yaml | 55 +++++++++++++++++++
 include/dt-bindings/clock/qcom,apss-ipq.h     |  6 ++
 .../dt-bindings/interconnect/qcom,ipq5424.h   |  3 +
 3 files changed, 64 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/clock/qcom,ipq5424-apss-clk.yaml

diff --git a/Documentation/devicetree/bindings/clock/qcom,ipq5424-apss-clk.yaml b/Documentation/devicetree/bindings/clock/qcom,ipq5424-apss-clk.yaml
new file mode 100644
index 000000000000..def739fa0a8c
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,ipq5424-apss-clk.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,ipq5424-apss-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm APSS IPQ5424 Clock Controller
+
+maintainers:
+  - Varadarajan Narayanan <quic_varada@quicinc.com>
+
+description:
+  The CPU core in ipq5424 is clocked by a huayra PLL with RCG support.
+  The RCG and PLL have a separate register space from the GCC.
+
+properties:
+  compatible:
+    enum:
+      - qcom,ipq5424-apss-clk
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Reference to the XO clock.
+      - description: Reference to the GPLL0 clock.
+
+  '#clock-cells':
+    const: 1
+
+  '#interconnect-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - '#clock-cells'
+  - '#interconnect-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,ipq5424-gcc.h>
+
+    apss_clk: clock-controller@fa80000 {
+      compatible = "qcom,ipq5424-apss-clk";
+      reg = <0x0fa80000 0x20000>;
+      clocks = <&xo_board>,
+               <&gcc GPLL0>;
+      #clock-cells = <1>;
+      #interconnect-cells = <1>;
+    };
diff --git a/include/dt-bindings/clock/qcom,apss-ipq.h b/include/dt-bindings/clock/qcom,apss-ipq.h
index 77b6e05492e2..0bb41e5efdef 100644
--- a/include/dt-bindings/clock/qcom,apss-ipq.h
+++ b/include/dt-bindings/clock/qcom,apss-ipq.h
@@ -8,5 +8,11 @@
 
 #define APCS_ALIAS0_CLK_SRC			0
 #define APCS_ALIAS0_CORE_CLK			1
+#define APSS_PLL_EARLY				2
+#define APSS_SILVER_CLK_SRC			3
+#define APSS_SILVER_CORE_CLK			4
+#define L3_PLL					5
+#define L3_CLK_SRC				6
+#define L3_CORE_CLK				7
 
 #endif
diff --git a/include/dt-bindings/interconnect/qcom,ipq5424.h b/include/dt-bindings/interconnect/qcom,ipq5424.h
index a770356112ee..afd7e0683a24 100644
--- a/include/dt-bindings/interconnect/qcom,ipq5424.h
+++ b/include/dt-bindings/interconnect/qcom,ipq5424.h
@@ -21,4 +21,7 @@
 #define MASTER_CNOC_USB			16
 #define SLAVE_CNOC_USB			17
 
+#define MASTER_CPU			0
+#define SLAVE_L3			1
+
 #endif /* INTERCONNECT_QCOM_IPQ5424_H */
-- 
2.34.1

[PATCH v7 2/4] clk: qcom: apss-ipq5424: Add ipq5424 apss clock controller

[Varadarajan Narayanan]

From: Sricharan Ramabadhran <quic_srichara@quicinc.com>

CPU on Qualcomm ipq5424 is clocked by huayra PLL with RCG support.
Add support for the APSS PLL, RCG and clock enable for ipq5424.
The PLL, RCG register space are clubbed. Hence adding new APSS driver
for both PLL and RCG/CBC control. Also the L3 cache has a separate pll
and needs to be scaled along with the CPU and is modeled as an ICC clock.

Co-developed-by: Md Sadre Alam <quic_mdalam@quicinc.com>
Signed-off-by: Md Sadre Alam <quic_mdalam@quicinc.com>
Signed-off-by: Sricharan Ramabadhran <quic_srichara@quicinc.com>
[ Removed clock notifier, moved L3 pll to icc-clk, used existing
alpha pll structure ]
Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
---
v7: Use index instead of clock-names in l3 pll
    Select IPQ_APSS_5424 if IPQ_GCC_5424 is enabled

v6: Drop all clock-names and use index instead
    Fix coding style issues

v5: Use enums instead of clock names in clock struct
    Add 'sync_state = icc_sync_state'

v4: s/gpll0/clk_ref/g

v3: Use the qcom_cc_driver_data framework to trim down apss_ipq5424_probe
    Rearrange structures to use in other structures

v2: Model L3 pll as ICC clock and add relevant structures
    Use CLK_ALPHA_PLL_TYPE_HUAYRA_2290 register offsets instead
    of duplicate ipq5424_pll_offsets definition.
    Inline clock rates.
    Fix MODULE_LICENSE
---
 drivers/clk/qcom/Kconfig        |   9 ++
 drivers/clk/qcom/Makefile       |   1 +
 drivers/clk/qcom/apss-ipq5424.c | 265 ++++++++++++++++++++++++++++++++
 3 files changed, 275 insertions(+)
 create mode 100644 drivers/clk/qcom/apss-ipq5424.c

diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
index 6cb6cd3e1778..aeb6197d7c90 100644
--- a/drivers/clk/qcom/Kconfig
+++ b/drivers/clk/qcom/Kconfig
@@ -187,6 +187,15 @@ config IPQ_APSS_PLL
 	  Say Y if you want to support CPU frequency scaling on ipq based
 	  devices.
 
+config IPQ_APSS_5424
+	tristate "IPQ APSS Clock Controller"
+	select IPQ_APSS_PLL
+	default y if IPQ_GCC_5424
+	help
+	  Support for APSS Clock controller on Qualcom IPQ5424 platform.
+	  Say Y if you want to support CPU frequency scaling on ipq based
+	  devices.
+
 config IPQ_APSS_6018
 	tristate "IPQ APSS Clock Controller"
 	select IPQ_APSS_PLL
diff --git a/drivers/clk/qcom/Makefile b/drivers/clk/qcom/Makefile
index ddb7e06fae40..98de55eb6402 100644
--- a/drivers/clk/qcom/Makefile
+++ b/drivers/clk/qcom/Makefile
@@ -29,6 +29,7 @@ obj-$(CONFIG_CLK_X1E80100_TCSRCC) += tcsrcc-x1e80100.o
 obj-$(CONFIG_CLK_X1P42100_GPUCC) += gpucc-x1p42100.o
 obj-$(CONFIG_CLK_QCM2290_GPUCC) += gpucc-qcm2290.o
 obj-$(CONFIG_IPQ_APSS_PLL) += apss-ipq-pll.o
+obj-$(CONFIG_IPQ_APSS_5424) += apss-ipq5424.o
 obj-$(CONFIG_IPQ_APSS_6018) += apss-ipq6018.o
 obj-$(CONFIG_IPQ_CMN_PLL) += ipq-cmn-pll.o
 obj-$(CONFIG_IPQ_GCC_4019) += gcc-ipq4019.o
diff --git a/drivers/clk/qcom/apss-ipq5424.c b/drivers/clk/qcom/apss-ipq5424.c
new file mode 100644
index 000000000000..4c67f722e009
--- /dev/null
+++ b/drivers/clk/qcom/apss-ipq5424.c
@@ -0,0 +1,265 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2018, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2025, Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/err.h>
+#include <linux/interconnect-provider.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#include <dt-bindings/arm/qcom,ids.h>
+#include <dt-bindings/clock/qcom,apss-ipq.h>
+#include <dt-bindings/interconnect/qcom,ipq5424.h>
+
+#include "clk-alpha-pll.h"
+#include "clk-branch.h"
+#include "clk-rcg.h"
+#include "clk-regmap.h"
+#include "common.h"
+
+enum {
+	DT_XO,
+	DT_CLK_REF,
+};
+
+enum {
+	P_XO,
+	P_GPLL0,
+	P_APSS_PLL_EARLY,
+	P_L3_PLL,
+};
+
+struct apss_clk {
+	struct notifier_block cpu_clk_notifier;
+	struct clk_hw *hw;
+	struct device *dev;
+	struct clk *l3_clk;
+};
+
+static const struct alpha_pll_config apss_pll_config = {
+	.l = 0x3b,
+	.config_ctl_val = 0x08200920,
+	.config_ctl_hi_val = 0x05008001,
+	.config_ctl_hi1_val = 0x04000000,
+	.user_ctl_val = 0xf,
+};
+
+static struct clk_alpha_pll ipq5424_apss_pll = {
+	.offset = 0x0,
+	.config = &apss_pll_config,
+	.regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_HUAYRA_2290],
+	.flags = SUPPORTS_DYNAMIC_UPDATE,
+	.clkr = {
+		.enable_reg = 0x0,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "apss_pll",
+			.parent_data = &(const struct clk_parent_data) {
+				.index = DT_XO,
+			},
+			.num_parents = 1,
+			.ops = &clk_alpha_pll_huayra_ops,
+		},
+	},
+};
+
+static const struct clk_parent_data parents_apss_silver_clk_src[] = {
+	{ .index = DT_XO },
+	{ .index = DT_CLK_REF },
+	{ .hw = &ipq5424_apss_pll.clkr.hw },
+};
+
+static const struct parent_map parents_apss_silver_clk_src_map[] = {
+	{ P_XO, 0 },
+	{ P_GPLL0, 4 },
+	{ P_APSS_PLL_EARLY, 5 },
+};
+
+static const struct freq_tbl ftbl_apss_clk_src[] = {
+	F(816000000, P_APSS_PLL_EARLY, 1, 0, 0),
+	F(1416000000, P_APSS_PLL_EARLY, 1, 0, 0),
+	F(1800000000, P_APSS_PLL_EARLY, 1, 0, 0),
+	{ }
+};
+
+static struct clk_rcg2 apss_silver_clk_src = {
+	.cmd_rcgr = 0x0080,
+	.freq_tbl = ftbl_apss_clk_src,
+	.hid_width = 5,
+	.parent_map = parents_apss_silver_clk_src_map,
+	.clkr.hw.init = &(struct clk_init_data) {
+		.name = "apss_silver_clk_src",
+		.parent_data = parents_apss_silver_clk_src,
+		.num_parents = ARRAY_SIZE(parents_apss_silver_clk_src),
+		.ops = &clk_rcg2_ops,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_branch apss_silver_core_clk = {
+	.halt_reg = 0x008c,
+	.clkr = {
+		.enable_reg = 0x008c,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data) {
+			.name = "apss_silver_core_clk",
+			.parent_hws = (const struct clk_hw *[]) {
+				&apss_silver_clk_src.clkr.hw
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT | CLK_IS_CRITICAL,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static const struct alpha_pll_config l3_pll_config = {
+	.l = 0x29,
+	.config_ctl_val = 0x08200920,
+	.config_ctl_hi_val = 0x05008001,
+	.config_ctl_hi1_val = 0x04000000,
+	.user_ctl_val = 0xf,
+};
+
+static struct clk_alpha_pll ipq5424_l3_pll = {
+	.offset = 0x10000,
+	.config = &l3_pll_config,
+	.regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_HUAYRA_2290],
+	.flags = SUPPORTS_DYNAMIC_UPDATE,
+	.clkr = {
+		.enable_reg = 0x0,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data) {
+			.name = "l3_pll",
+			.parent_data = &(const struct clk_parent_data) {
+				.index = DT_XO,
+			},
+			.num_parents = 1,
+			.ops = &clk_alpha_pll_huayra_ops,
+		},
+	},
+};
+
+static const struct clk_parent_data parents_l3_clk_src[] = {
+	{ .index = DT_XO },
+	{ .index = DT_CLK_REF },
+	{ .hw = &ipq5424_l3_pll.clkr.hw },
+};
+
+static const struct parent_map parents_l3_clk_src_map[] = {
+	{ P_XO, 0 },
+	{ P_GPLL0, 4 },
+	{ P_L3_PLL, 5 },
+};
+
+static const struct freq_tbl ftbl_l3_clk_src[] = {
+	F(816000000, P_L3_PLL, 1, 0, 0),
+	F(984000000, P_L3_PLL, 1, 0, 0),
+	F(1272000000, P_L3_PLL, 1, 0, 0),
+	{ }
+};
+
+static struct clk_rcg2 l3_clk_src = {
+	.cmd_rcgr = 0x10080,
+	.freq_tbl = ftbl_l3_clk_src,
+	.hid_width = 5,
+	.parent_map = parents_l3_clk_src_map,
+	.clkr.hw.init = &(struct clk_init_data) {
+		.name = "l3_clk_src",
+		.parent_data = parents_l3_clk_src,
+		.num_parents = ARRAY_SIZE(parents_l3_clk_src),
+		.ops = &clk_rcg2_ops,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_branch l3_core_clk = {
+	.halt_reg = 0x1008c,
+	.clkr = {
+		.enable_reg = 0x1008c,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data) {
+			.name = "l3_clk",
+			.parent_hws = (const struct clk_hw *[]) {
+				&l3_clk_src.clkr.hw
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT | CLK_IS_CRITICAL,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static const struct regmap_config apss_ipq5424_regmap_config = {
+	.reg_bits       = 32,
+	.reg_stride     = 4,
+	.val_bits       = 32,
+	.max_register   = 0x20000,
+	.fast_io        = true,
+};
+
+static struct clk_regmap *apss_ipq5424_clks[] = {
+	[APSS_PLL_EARLY] = &ipq5424_apss_pll.clkr,
+	[APSS_SILVER_CLK_SRC] = &apss_silver_clk_src.clkr,
+	[APSS_SILVER_CORE_CLK] = &apss_silver_core_clk.clkr,
+	[L3_PLL] = &ipq5424_l3_pll.clkr,
+	[L3_CLK_SRC] = &l3_clk_src.clkr,
+	[L3_CORE_CLK] = &l3_core_clk.clkr,
+};
+
+static struct clk_alpha_pll *ipa5424_apss_plls[] = {
+	&ipq5424_l3_pll,
+	&ipq5424_apss_pll,
+};
+
+static struct qcom_cc_driver_data ipa5424_apss_driver_data = {
+	.alpha_plls = ipa5424_apss_plls,
+	.num_alpha_plls = ARRAY_SIZE(ipa5424_apss_plls),
+};
+
+#define IPQ_APPS_PLL_ID			(5424 * 3)	/* some unique value */
+
+static const struct qcom_icc_hws_data icc_ipq5424_cpu_l3[] = {
+	{ MASTER_CPU, SLAVE_L3, L3_CORE_CLK },
+};
+
+static const struct qcom_cc_desc apss_ipq5424_desc = {
+	.config = &apss_ipq5424_regmap_config,
+	.clks = apss_ipq5424_clks,
+	.num_clks = ARRAY_SIZE(apss_ipq5424_clks),
+	.icc_hws = icc_ipq5424_cpu_l3,
+	.num_icc_hws = ARRAY_SIZE(icc_ipq5424_cpu_l3),
+	.icc_first_node_id = IPQ_APPS_PLL_ID,
+	.driver_data = &ipa5424_apss_driver_data,
+};
+
+static int apss_ipq5424_probe(struct platform_device *pdev)
+{
+	return qcom_cc_probe(pdev, &apss_ipq5424_desc);
+}
+
+static const struct of_device_id apss_ipq5424_match_table[] = {
+	{ .compatible = "qcom,ipq5424-apss-clk" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, apss_ipq5424_match_table);
+
+static struct platform_driver apss_ipq5424_driver = {
+	.probe = apss_ipq5424_probe,
+	.driver = {
+		.name   = "apss-ipq5424-clk",
+		.of_match_table = apss_ipq5424_match_table,
+		.sync_state = icc_sync_state,
+	},
+};
+
+module_platform_driver(apss_ipq5424_driver);
+
+MODULE_DESCRIPTION("QCOM APSS IPQ5424 CLK Driver");
+MODULE_LICENSE("GPL");
-- 
2.34.1

[PATCH v7 3/4] cpufreq: qcom-nvmem: Enable cpufreq for ipq5424

[Varadarajan Narayanan]

From: Md Sadre Alam <quic_mdalam@quicinc.com>

IPQ5424 have different OPPs available for the CPU based on
SoC variant. This can be determined through use of an eFuse
register present in the silicon.

Added support for ipq5424 on nvmem driver which helps to
determine OPPs at runtime based on the eFuse register which
has the CPU frequency limits. opp-supported-hw dt binding
can be used to indicate the available OPPs for each limit.

nvmem driver also creates the "cpufreq-dt" platform_device after
passing the version matching data to the OPP framework so that the
cpufreq-dt handles the actual cpufreq implementation.

Signed-off-by: Md Sadre Alam <quic_mdalam@quicinc.com>
Signed-off-by: Sricharan Ramabadhran <quic_srichara@quicinc.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
[ Changed '!=' based check to '==' based check ]
Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
---
v5: Add 'Acked-by: Viresh Kumar'
---
 drivers/cpufreq/cpufreq-dt-platdev.c | 1 +
 drivers/cpufreq/qcom-cpufreq-nvmem.c | 5 +++++
 2 files changed, 6 insertions(+)

diff --git a/drivers/cpufreq/cpufreq-dt-platdev.c b/drivers/cpufreq/cpufreq-dt-platdev.c
index 015dd393eaba..de1769649368 100644
--- a/drivers/cpufreq/cpufreq-dt-platdev.c
+++ b/drivers/cpufreq/cpufreq-dt-platdev.c
@@ -191,6 +191,7 @@ static const struct of_device_id blocklist[] __initconst = {
 	{ .compatible = "ti,am62p5", },
 
 	{ .compatible = "qcom,ipq5332", },
+	{ .compatible = "qcom,ipq5424", },
 	{ .compatible = "qcom,ipq6018", },
 	{ .compatible = "qcom,ipq8064", },
 	{ .compatible = "qcom,ipq8074", },
diff --git a/drivers/cpufreq/qcom-cpufreq-nvmem.c b/drivers/cpufreq/qcom-cpufreq-nvmem.c
index 54f8117103c8..765a5bb81829 100644
--- a/drivers/cpufreq/qcom-cpufreq-nvmem.c
+++ b/drivers/cpufreq/qcom-cpufreq-nvmem.c
@@ -200,6 +200,10 @@ static int qcom_cpufreq_kryo_name_version(struct device *cpu_dev,
 	case QCOM_ID_IPQ9574:
 		drv->versions = 1 << (unsigned int)(*speedbin);
 		break;
+	case QCOM_ID_IPQ5424:
+	case QCOM_ID_IPQ5404:
+		drv->versions = (*speedbin == 0x3b) ? BIT(1) : BIT(0);
+		break;
 	case QCOM_ID_MSM8996SG:
 	case QCOM_ID_APQ8096SG:
 		drv->versions = 1 << ((unsigned int)(*speedbin) + 4);
@@ -591,6 +595,7 @@ static const struct of_device_id qcom_cpufreq_match_list[] __initconst __maybe_u
 	{ .compatible = "qcom,msm8996", .data = &match_data_kryo },
 	{ .compatible = "qcom,qcs404", .data = &match_data_qcs404 },
 	{ .compatible = "qcom,ipq5332", .data = &match_data_kryo },
+	{ .compatible = "qcom,ipq5424", .data = &match_data_kryo },
 	{ .compatible = "qcom,ipq6018", .data = &match_data_ipq6018 },
 	{ .compatible = "qcom,ipq8064", .data = &match_data_ipq8064 },
 	{ .compatible = "qcom,ipq8074", .data = &match_data_ipq8074 },
-- 
2.34.1

[PATCH v7 4/4] arm64: dts: qcom: ipq5424: Enable cpufreq

[Varadarajan Narayanan]

From: Sricharan Ramabadhran <quic_srichara@quicinc.com>

Add the qfprom, cpu clocks, A53 PLL and cpu-opp-table required for
CPU clock scaling.

Signed-off-by: Sricharan Ramabadhran <quic_srichara@quicinc.com>
[ Added interconnect related entries, fix dt-bindings errors ]
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
---
v7: Add 'Reviewed-by: Konrad Dybcio'

v6: Drop clock-names
    Fix opp-microvolt

v5: Add opp-816000000
    Have one item per line for clocks and clock-names

v4: s/gpll0/clk_ref/ in clock-names
    s/apss-clock/clock/ in node name

v3: Remove L3_CORE_CLK from cpu node as it comes through icc-clk

v2: Add 'interconnects' to cpu nodes
    Add 'opp-peak-kBps' to opp table
    Add '#interconnect-cells' to apss_clk
    Remove unnecessary comment
    Fix dt-binding-errors in qfprom node
---
 arch/arm64/boot/dts/qcom/ipq5424.dtsi | 69 +++++++++++++++++++++++++++
 1 file changed, 69 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/ipq5424.dtsi b/arch/arm64/boot/dts/qcom/ipq5424.dtsi
index 2eea8a078595..f12aaaeb4cab 100644
--- a/arch/arm64/boot/dts/qcom/ipq5424.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq5424.dtsi
@@ -7,6 +7,7 @@
  */
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/qcom,apss-ipq.h>
 #include <dt-bindings/clock/qcom,ipq5424-cmn-pll.h>
 #include <dt-bindings/clock/qcom,ipq5424-gcc.h>
 #include <dt-bindings/reset/qcom,ipq5424-gcc.h>
@@ -52,6 +53,11 @@ cpu0: cpu@0 {
 			reg = <0x0>;
 			enable-method = "psci";
 			next-level-cache = <&l2_0>;
+			clocks = <&apss_clk APSS_SILVER_CORE_CLK>;
+			clock-names = "cpu";
+			operating-points-v2 = <&cpu_opp_table>;
+			interconnects = <&apss_clk MASTER_CPU &apss_clk SLAVE_L3>;
+
 			l2_0: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
@@ -72,6 +78,10 @@ cpu1: cpu@100 {
 			enable-method = "psci";
 			reg = <0x100>;
 			next-level-cache = <&l2_100>;
+			clocks = <&apss_clk APSS_SILVER_CORE_CLK>;
+			clock-names = "cpu";
+			operating-points-v2 = <&cpu_opp_table>;
+			interconnects = <&apss_clk MASTER_CPU &apss_clk SLAVE_L3>;
 
 			l2_100: l2-cache {
 				compatible = "cache";
@@ -87,6 +97,10 @@ cpu2: cpu@200 {
 			enable-method = "psci";
 			reg = <0x200>;
 			next-level-cache = <&l2_200>;
+			clocks = <&apss_clk APSS_SILVER_CORE_CLK>;
+			clock-names = "cpu";
+			operating-points-v2 = <&cpu_opp_table>;
+			interconnects = <&apss_clk MASTER_CPU &apss_clk SLAVE_L3>;
 
 			l2_200: l2-cache {
 				compatible = "cache";
@@ -102,6 +116,10 @@ cpu3: cpu@300 {
 			enable-method = "psci";
 			reg = <0x300>;
 			next-level-cache = <&l2_300>;
+			clocks = <&apss_clk APSS_SILVER_CORE_CLK>;
+			clock-names = "cpu";
+			operating-points-v2 = <&cpu_opp_table>;
+			interconnects = <&apss_clk MASTER_CPU &apss_clk SLAVE_L3>;
 
 			l2_300: l2-cache {
 				compatible = "cache";
@@ -119,6 +137,36 @@ scm {
 		};
 	};
 
+	cpu_opp_table: opp-table-cpu {
+		compatible = "operating-points-v2-kryo-cpu";
+		opp-shared;
+		nvmem-cells = <&cpu_speed_bin>;
+
+		opp-816000000 {
+			opp-hz = /bits/ 64 <816000000>;
+			opp-microvolt = <850000>;
+			opp-supported-hw = <0x3>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <816000>;
+		};
+
+		opp-1416000000 {
+			opp-hz = /bits/ 64 <1416000000>;
+			opp-microvolt = <850000>;
+			opp-supported-hw = <0x3>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <984000>;
+		};
+
+		opp-1800000000 {
+			opp-hz = /bits/ 64 <1800000000>;
+			opp-microvolt = <1000000>;
+			opp-supported-hw = <0x1>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <1272000>;
+		};
+	};
+
 	memory@80000000 {
 		device_type = "memory";
 		/* We expect the bootloader to fill in the size */
@@ -388,6 +436,18 @@ system-cache-controller@800000 {
 			interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
+		qfprom@a6000 {
+			compatible = "qcom,ipq5424-qfprom", "qcom,qfprom";
+			reg = <0x0 0x000a6000 0x0 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			cpu_speed_bin: cpu-speed-bin@234 {
+				reg = <0x234 0x1>;
+				bits = <0 8>;
+			};
+		};
+
 		tlmm: pinctrl@1000000 {
 			compatible = "qcom,ipq5424-tlmm";
 			reg = <0 0x01000000 0 0x300000>;
@@ -730,6 +790,15 @@ frame@f42d000 {
 			};
 		};
 
+		apss_clk: clock-controller@fa80000 {
+			compatible = "qcom,ipq5424-apss-clk";
+			reg = <0x0 0x0fa80000 0x0 0x20000>;
+			clocks = <&xo_board>,
+				 <&gcc GPLL0>;
+			#clock-cells = <1>;
+			#interconnect-cells = <1>;
+		};
+
 		pcie3: pcie@40000000 {
 			compatible = "qcom,pcie-ipq5424", "qcom,pcie-ipq9574";
 			reg = <0x0 0x40000000 0x0 0xf1c>,
-- 
2.34.1

Re: [PATCH v7 3/4] cpufreq: qcom-nvmem: Enable cpufreq for ipq5424

[Viresh Kumar]

On 11-08-25, 14:39, Varadarajan Narayanan wrote:
> From: Md Sadre Alam <quic_mdalam@quicinc.com>
> 
> IPQ5424 have different OPPs available for the CPU based on
> SoC variant. This can be determined through use of an eFuse
> register present in the silicon.
> 
> Added support for ipq5424 on nvmem driver which helps to
> determine OPPs at runtime based on the eFuse register which
> has the CPU frequency limits. opp-supported-hw dt binding
> can be used to indicate the available OPPs for each limit.
> 
> nvmem driver also creates the "cpufreq-dt" platform_device after
> passing the version matching data to the OPP framework so that the
> cpufreq-dt handles the actual cpufreq implementation.
> 
> Signed-off-by: Md Sadre Alam <quic_mdalam@quicinc.com>
> Signed-off-by: Sricharan Ramabadhran <quic_srichara@quicinc.com>
> Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
> [ Changed '!=' based check to '==' based check ]
> Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
> ---
> v5: Add 'Acked-by: Viresh Kumar'
> ---
>  drivers/cpufreq/cpufreq-dt-platdev.c | 1 +
>  drivers/cpufreq/qcom-cpufreq-nvmem.c | 5 +++++
>  2 files changed, 6 insertions(+)

You should have dropped this one now, as I already applied the
previous version.

-- 
viresh

Re: [PATCH v7 3/4] cpufreq: qcom-nvmem: Enable cpufreq for ipq5424

[Varadarajan Narayanan]

On Mon, Aug 11, 2025 at 02:52:02PM +0530, Viresh Kumar wrote:
> On 11-08-25, 14:39, Varadarajan Narayanan wrote:
> > From: Md Sadre Alam <quic_mdalam@quicinc.com>
> >
> > IPQ5424 have different OPPs available for the CPU based on
> > SoC variant. This can be determined through use of an eFuse
> > register present in the silicon.
> >
> > Added support for ipq5424 on nvmem driver which helps to
> > determine OPPs at runtime based on the eFuse register which
> > has the CPU frequency limits. opp-supported-hw dt binding
> > can be used to indicate the available OPPs for each limit.
> >
> > nvmem driver also creates the "cpufreq-dt" platform_device after
> > passing the version matching data to the OPP framework so that the
> > cpufreq-dt handles the actual cpufreq implementation.
> >
> > Signed-off-by: Md Sadre Alam <quic_mdalam@quicinc.com>
> > Signed-off-by: Sricharan Ramabadhran <quic_srichara@quicinc.com>
> > Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
> > Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
> > [ Changed '!=' based check to '==' based check ]
> > Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
> > ---
> > v5: Add 'Acked-by: Viresh Kumar'
> > ---
> >  drivers/cpufreq/cpufreq-dt-platdev.c | 1 +
> >  drivers/cpufreq/qcom-cpufreq-nvmem.c | 5 +++++
> >  2 files changed, 6 insertions(+)
>
> You should have dropped this one now, as I already applied the
> previous version.

Sorry. Should I send a v8 with this dropped or is it okay?

Thanks
Varada

Re: [PATCH v7 3/4] cpufreq: qcom-nvmem: Enable cpufreq for ipq5424

[Viresh Kumar]

On 11-08-25, 15:10, Varadarajan Narayanan wrote:
> Sorry. Should I send a v8 with this dropped or is it okay?

No need of a resend for now.

-- 
viresh

Re: [PATCH v7 2/4] clk: qcom: apss-ipq5424: Add ipq5424 apss clock controller

[Konrad Dybcio]

On 8/11/25 11:09 AM, Varadarajan Narayanan wrote:
> From: Sricharan Ramabadhran <quic_srichara@quicinc.com>
> 
> CPU on Qualcomm ipq5424 is clocked by huayra PLL with RCG support.
> Add support for the APSS PLL, RCG and clock enable for ipq5424.
> The PLL, RCG register space are clubbed. Hence adding new APSS driver
> for both PLL and RCG/CBC control. Also the L3 cache has a separate pll
> and needs to be scaled along with the CPU and is modeled as an ICC clock.
> 
> Co-developed-by: Md Sadre Alam <quic_mdalam@quicinc.com>
> Signed-off-by: Md Sadre Alam <quic_mdalam@quicinc.com>
> Signed-off-by: Sricharan Ramabadhran <quic_srichara@quicinc.com>
> [ Removed clock notifier, moved L3 pll to icc-clk, used existing
> alpha pll structure ]
> Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
> ---

Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>

Konrad

Re: (subset) [PATCH v7 0/4] Enable cpufreq for IPQ5424

[Bjorn Andersson]

On Mon, 11 Aug 2025 14:39:50 +0530, Varadarajan Narayanan wrote:
> CPU on Qualcomm ipq5424 is clocked by huayra PLL with RCG support.
> Add support for the APSS PLL, RCG and clock enable for ipq5424.
> The PLL, RCG register space are clubbed. Hence adding new APSS driver
> for both PLL and RCG/CBC control. Also the L3 cache has a separate pll
> modeled as ICC clock. The L3 pll needs to be scaled along with the CPU.
> 
> v7: Fix 'Reviewed-by' placement for bindings patch
>     Use enum instead of clock names for l3 pll
>     Select IPQ_APSS_5424 if IPQ_GCC_5424 is enabled
> 
> [...]

Applied, thanks!

[2/4] clk: qcom: apss-ipq5424: Add ipq5424 apss clock controller
      commit: 5bf83c54bab5eb15a2749c6c52b6f96d425490bc

Best regards,
-- 
Bjorn Andersson <andersson@kernel.org>

Re: [PATCH v7 1/4] dt-bindings: clock: ipq5424-apss-clk: Add ipq5424 apss clock controller

[Georgi Djakov]

On 8/11/25 12:09 PM, Varadarajan Narayanan wrote:
> From: Sricharan Ramabadhran <quic_srichara@quicinc.com>
> 
> The CPU core in ipq5424 is clocked by a huayra PLL with RCG support.
> The RCG and PLL have a separate register space from the GCC.
> Also the L3 cache has a separate pll and needs to be scaled along
> with the CPU.
> 
> Co-developed-by: Md Sadre Alam <quic_mdalam@quicinc.com>
> Signed-off-by: Md Sadre Alam <quic_mdalam@quicinc.com>
> Signed-off-by: Sricharan Ramabadhran <quic_srichara@quicinc.com>
> [ Added interconnect related changes ]
> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
> ---
> v7: Fix 'Reviewed-by' placement
> 
> v6: Add 'Reviewed-by: Krzysztof Kozlowski'
>      Drop 'clock-names'
> 
> v5: Remove previous maintainers
>      Change clock@fa80000 to clock-controller@fa80000 in example
>      Have one item per line for clocks and clock-names in example
> 
> v4: Add self to 'maintainers'
>      s/gpll0/clk_ref/ in clock-names
>      s/apss-clock/clock/ in example's node name
> 
> v2: Add #interconnect-cells to help enable L3 pll as ICC clock
>      Add master/slave ids
> ---
>   .../bindings/clock/qcom,ipq5424-apss-clk.yaml | 55 +++++++++++++++++++
>   include/dt-bindings/clock/qcom,apss-ipq.h     |  6 ++
>   .../dt-bindings/interconnect/qcom,ipq5424.h   |  3 +

Acked-by: Georgi Djakov <djakov@kernel.org>

Re: (subset) [PATCH v7 0/4] Enable cpufreq for IPQ5424

[Bjorn Andersson]

On Mon, 11 Aug 2025 14:39:50 +0530, Varadarajan Narayanan wrote:
> CPU on Qualcomm ipq5424 is clocked by huayra PLL with RCG support.
> Add support for the APSS PLL, RCG and clock enable for ipq5424.
> The PLL, RCG register space are clubbed. Hence adding new APSS driver
> for both PLL and RCG/CBC control. Also the L3 cache has a separate pll
> modeled as ICC clock. The L3 pll needs to be scaled along with the CPU.
> 
> v7: Fix 'Reviewed-by' placement for bindings patch
>     Use enum instead of clock names for l3 pll
>     Select IPQ_APSS_5424 if IPQ_GCC_5424 is enabled
> 
> [...]

Applied, thanks!

[4/4] arm64: dts: qcom: ipq5424: Enable cpufreq
      commit: 77abf70ee126d40dba9ada0a4ccb4c7743f6a3e6

Best regards,
-- 
Bjorn Andersson <andersson@kernel.org>