[PATCH v2 08/24] media: iris: Allow stop on firmware only if start was issued.

[Dikshita Agarwal <quic_dikshita@quicinc.com>]

For HFI Gen1, the instances substate is changed to LOAD_RESOURCES only
when a START command is issues to the firmware. If STOP is called
without a prior START, the firmware may reject the command and throw
some erros.
Handle this by adding a substate check before issuing STOP command to
the firmware.

Fixes: 11712ce70f8e ("media: iris: implement vb2 streaming ops")
Reviewed-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Tested-by: Vikash Garodia <quic_vgarodia@quicinc.com> # X1E80100
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
---
 drivers/media/platform/qcom/iris/iris_hfi_gen1_command.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/media/platform/qcom/iris/iris_hfi_gen1_command.c b/drivers/media/platform/qcom/iris/iris_hfi_gen1_command.c
index 5fc30d54af4dc34616cfd08813940aa0b7044a20..5f1748ab80f88393215fc2d82c5c6b4af1266090 100644
--- a/drivers/media/platform/qcom/iris/iris_hfi_gen1_command.c
+++ b/drivers/media/platform/qcom/iris/iris_hfi_gen1_command.c
@@ -184,11 +184,12 @@ static int iris_hfi_gen1_session_stop(struct iris_inst *inst, u32 plane)
 	u32 flush_type = 0;
 	int ret = 0;
 
-	if ((V4L2_TYPE_IS_OUTPUT(plane) &&
-	     inst->state == IRIS_INST_INPUT_STREAMING) ||
+	if (((V4L2_TYPE_IS_OUTPUT(plane) &&
+	      inst->state == IRIS_INST_INPUT_STREAMING) ||
 	    (V4L2_TYPE_IS_CAPTURE(plane) &&
 	     inst->state == IRIS_INST_OUTPUT_STREAMING) ||
-	    inst->state == IRIS_INST_ERROR) {
+	    inst->state == IRIS_INST_ERROR) &&
+		inst->sub_state & IRIS_INST_SUB_LOAD_RESOURCES) {
 		reinit_completion(&inst->completion);
 		iris_hfi_gen1_packet_session_cmd(inst, &pkt, HFI_CMD_SESSION_STOP);
 		ret = iris_hfi_queue_cmd_write(core, &pkt, pkt.shdr.hdr.size);

-- 
2.34.1