[PATCH 3/9] arm64: dts: qcom: x1e001de-devkit: Explicitly enable used audio codecs

[Stephan Gerhold <stephan.gerhold@linaro.org>]

Currently, the macro audio codecs are enabled by default in x1e80100.dtsi.
However, they do not probe without the ADSP remoteproc, which is disabled
by default. Also, not all boards make use of all the audio codecs, e.g.
there are several boards with just two speakers. In this case, the
&lpass_wsa2macro is not used.

In preparation of disabling the audio codecs by default in x1e80100.dtsi,
add the missing status lines to explicitly enable the used audio codecs.

Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
---
 arch/arm64/boot/dts/qcom/x1e001de-devkit.dts | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/x1e001de-devkit.dts b/arch/arm64/boot/dts/qcom/x1e001de-devkit.dts
index 2d9627e6c7983daedba87619ba01074ee22b43c9..636264e130b7d4c82cfe7d8a24508cec20ff997d 100644
--- a/arch/arm64/boot/dts/qcom/x1e001de-devkit.dts
+++ b/arch/arm64/boot/dts/qcom/x1e001de-devkit.dts
@@ -974,6 +974,19 @@ retimer_ss1_con_sbu_out: endpoint {
 	};
 };
 
+&lpass_rxmacro {
+	status = "okay";
+};
+
+&lpass_txmacro {
+	status = "okay";
+};
+
+&lpass_vamacro {
+	/* Not directly used yet, but needed for fsgen by all other macros */
+	status = "okay";
+};
+
 &mdss {
 	status = "okay";
 };

-- 
2.50.1