linux-arm-msm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Maxime Chevallier <maxime.chevallier@bootlin.com>
To: davem@davemloft.net
Cc: "Maxime Chevallier" <maxime.chevallier@bootlin.com>,
	netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-arm-msm@vger.kernel.org, thomas.petazzoni@bootlin.com,
	"Andrew Lunn" <andrew@lunn.ch>,
	"Jakub Kicinski" <kuba@kernel.org>,
	"Eric Dumazet" <edumazet@google.com>,
	"Paolo Abeni" <pabeni@redhat.com>,
	"Russell King" <linux@armlinux.org.uk>,
	linux-arm-kernel@lists.infradead.org,
	"Christophe Leroy" <christophe.leroy@csgroup.eu>,
	"Herve Codina" <herve.codina@bootlin.com>,
	"Florian Fainelli" <f.fainelli@gmail.com>,
	"Heiner Kallweit" <hkallweit1@gmail.com>,
	"Vladimir Oltean" <vladimir.oltean@nxp.com>,
	"Köry Maincent" <kory.maincent@bootlin.com>,
	"Marek Behún" <kabel@kernel.org>,
	"Oleksij Rempel" <o.rempel@pengutronix.de>,
	"Nicolò Veronese" <nicveronese@gmail.com>,
	"Simon Horman" <horms@kernel.org>,
	mwojtas@chromium.org, "Antoine Tenart" <atenart@kernel.org>,
	devicetree@vger.kernel.org, "Conor Dooley" <conor+dt@kernel.org>,
	"Krzysztof Kozlowski" <krzk+dt@kernel.org>,
	"Rob Herring" <robh@kernel.org>,
	"Romain Gantois" <romain.gantois@bootlin.com>,
	"Daniel Golle" <daniel@makrotopia.org>,
	"Dimitri Fedrau" <dimitri.fedrau@liebherr.com>
Subject: [PATCH net-next v11 09/16] net: phy: marvell-88x2222: Support SFP through phy_port interface
Date: Thu, 14 Aug 2025 15:58:24 +0200	[thread overview]
Message-ID: <20250814135832.174911-10-maxime.chevallier@bootlin.com> (raw)
In-Reply-To: <20250814135832.174911-1-maxime.chevallier@bootlin.com>

The 88x2222 PHY from Marvell only supports serialised modes as its
line-facing interfaces. Convert that driver to the generic phylib SFP
handling.

Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
---
 drivers/net/phy/marvell-88x2222.c | 95 +++++++++++++------------------
 1 file changed, 38 insertions(+), 57 deletions(-)

diff --git a/drivers/net/phy/marvell-88x2222.c b/drivers/net/phy/marvell-88x2222.c
index fad2f54c1eac..ba1bbb6c63d6 100644
--- a/drivers/net/phy/marvell-88x2222.c
+++ b/drivers/net/phy/marvell-88x2222.c
@@ -13,7 +13,7 @@
 #include <linux/mdio.h>
 #include <linux/marvell_phy.h>
 #include <linux/of.h>
-#include <linux/sfp.h>
+#include <linux/phy_port.h>
 #include <linux/netdevice.h>
 
 /* Port PCS Configuration */
@@ -473,90 +473,70 @@ static int mv2222_config_init(struct phy_device *phydev)
 	return 0;
 }
 
-static int mv2222_sfp_insert(void *upstream, const struct sfp_eeprom_id *id)
+static int mv2222_configure_serdes(struct phy_port *port, bool enable,
+				   phy_interface_t interface)
 {
-	DECLARE_PHY_INTERFACE_MASK(interfaces);
-	struct phy_device *phydev = upstream;
-	phy_interface_t sfp_interface;
+	struct phy_device *phydev = port_phydev(port);
 	struct mv2222_data *priv;
-	struct device *dev;
-	int ret;
-
-	__ETHTOOL_DECLARE_LINK_MODE_MASK(sfp_supported) = { 0, };
+	int ret = 0;
 
 	priv = phydev->priv;
-	dev = &phydev->mdio.dev;
-
-	sfp_parse_support(phydev->sfp_bus, id, sfp_supported, interfaces);
-	phydev->port = sfp_parse_port(phydev->sfp_bus, id, sfp_supported);
-	sfp_interface = sfp_select_interface(phydev->sfp_bus, sfp_supported);
-
-	dev_info(dev, "%s SFP module inserted\n", phy_modes(sfp_interface));
+	priv->line_interface = interface;
 
-	if (sfp_interface != PHY_INTERFACE_MODE_10GBASER &&
-	    sfp_interface != PHY_INTERFACE_MODE_1000BASEX &&
-	    sfp_interface != PHY_INTERFACE_MODE_SGMII) {
-		dev_err(dev, "Incompatible SFP module inserted\n");
+	if (enable) {
+		linkmode_and(priv->supported, phydev->supported, port->supported);
 
-		return -EINVAL;
-	}
-
-	priv->line_interface = sfp_interface;
-	linkmode_and(priv->supported, phydev->supported, sfp_supported);
+		ret = mv2222_config_line(phydev);
+		if (ret < 0)
+			return ret;
 
-	ret = mv2222_config_line(phydev);
-	if (ret < 0)
-		return ret;
+		if (mutex_trylock(&phydev->lock)) {
+			ret = mv2222_config_aneg(phydev);
+			mutex_unlock(&phydev->lock);
+		}
 
-	if (mutex_trylock(&phydev->lock)) {
-		ret = mv2222_config_aneg(phydev);
-		mutex_unlock(&phydev->lock);
+	} else {
+		linkmode_zero(priv->supported);
 	}
 
 	return ret;
 }
 
-static void mv2222_sfp_remove(void *upstream)
+static void mv2222_port_link_up(struct phy_port *port)
 {
-	struct phy_device *phydev = upstream;
-	struct mv2222_data *priv;
-
-	priv = phydev->priv;
-
-	priv->line_interface = PHY_INTERFACE_MODE_NA;
-	linkmode_zero(priv->supported);
-	phydev->port = PORT_NONE;
-}
-
-static void mv2222_sfp_link_up(void *upstream)
-{
-	struct phy_device *phydev = upstream;
+	struct phy_device *phydev = port_phydev(port);
 	struct mv2222_data *priv;
 
 	priv = phydev->priv;
 	priv->sfp_link = true;
 }
 
-static void mv2222_sfp_link_down(void *upstream)
+static void mv2222_port_link_down(struct phy_port *port)
 {
-	struct phy_device *phydev = upstream;
+	struct phy_device *phydev = port_phydev(port);
 	struct mv2222_data *priv;
 
 	priv = phydev->priv;
 	priv->sfp_link = false;
 }
 
-static const struct sfp_upstream_ops sfp_phy_ops = {
-	.module_insert = mv2222_sfp_insert,
-	.module_remove = mv2222_sfp_remove,
-	.link_up = mv2222_sfp_link_up,
-	.link_down = mv2222_sfp_link_down,
-	.attach = phy_sfp_attach,
-	.detach = phy_sfp_detach,
-	.connect_phy = phy_sfp_connect_phy,
-	.disconnect_phy = phy_sfp_disconnect_phy,
+static const struct phy_port_ops mv2222_port_ops = {
+	.link_up = mv2222_port_link_up,
+	.link_down = mv2222_port_link_down,
+	.configure_mii = mv2222_configure_serdes,
 };
 
+static int mv2222_attach_mii_port(struct phy_device *phydev, struct phy_port *port)
+{
+	port->ops = &mv2222_port_ops;
+
+	__set_bit(PHY_INTERFACE_MODE_10GBASER, port->interfaces);
+	__set_bit(PHY_INTERFACE_MODE_1000BASEX, port->interfaces);
+	__set_bit(PHY_INTERFACE_MODE_SGMII, port->interfaces);
+
+	return 0;
+}
+
 static int mv2222_probe(struct phy_device *phydev)
 {
 	struct device *dev = &phydev->mdio.dev;
@@ -592,7 +572,7 @@ static int mv2222_probe(struct phy_device *phydev)
 	priv->line_interface = PHY_INTERFACE_MODE_NA;
 	phydev->priv = priv;
 
-	return phy_sfp_probe(phydev, &sfp_phy_ops);
+	return 0;
 }
 
 static struct phy_driver mv2222_drivers[] = {
@@ -609,6 +589,7 @@ static struct phy_driver mv2222_drivers[] = {
 		.suspend = mv2222_suspend,
 		.resume = mv2222_resume,
 		.read_status = mv2222_read_status,
+		.attach_mii_port = mv2222_attach_mii_port,
 	},
 };
 module_phy_driver(mv2222_drivers);
-- 
2.49.0


  parent reply	other threads:[~2025-08-14 13:58 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-08-14 13:58 [PATCH net-next v11 00/16] net: phy: Introduce PHY ports representation Maxime Chevallier
2025-08-14 13:58 ` [PATCH net-next v11 01/16] dt-bindings: net: Introduce the ethernet-connector description Maxime Chevallier
2025-08-14 13:58 ` [PATCH net-next v11 02/16] net: ethtool: common: Indicate that BaseT works on up to 4 lanes Maxime Chevallier
2025-08-14 13:58 ` [PATCH net-next v11 03/16] net: ethtool: Introduce ETHTOOL_LINK_MEDIUM_* values Maxime Chevallier
2025-08-14 13:58 ` [PATCH net-next v11 04/16] net: phy: Introduce PHY ports representation Maxime Chevallier
2025-08-14 13:58 ` [PATCH net-next v11 05/16] net: phy: dp83822: Add support for phy_port representation Maxime Chevallier
2025-08-14 13:58 ` [PATCH net-next v11 06/16] dt-bindings: net: dp83822: Deprecate ti,fiber-mode Maxime Chevallier
2025-08-14 22:34   ` Rob Herring
2025-08-14 13:58 ` [PATCH net-next v11 07/16] net: phy: Create a phy_port for PHY-driven SFPs Maxime Chevallier
2025-08-14 13:58 ` [PATCH net-next v11 08/16] net: phy: Introduce generic SFP handling for PHY drivers Maxime Chevallier
2025-08-15  3:25   ` kernel test robot
2025-08-22  9:59     ` Maxime Chevallier
2025-08-27 14:10   ` Simon Horman
2025-08-14 13:58 ` Maxime Chevallier [this message]
2025-08-14 13:58 ` [PATCH net-next v11 10/16] net: phy: marvell: Support SFP through phy_port interface Maxime Chevallier
2025-08-14 13:58 ` [PATCH net-next v11 11/16] net: phy: marvell10g: Support SFP through phy_port Maxime Chevallier
2025-08-14 13:58 ` [PATCH net-next v11 12/16] net: phy: at803x: Support SFP through phy_port interface Maxime Chevallier
2025-08-14 13:58 ` [PATCH net-next v11 13/16] net: phy: qca807x: " Maxime Chevallier
2025-08-14 13:58 ` [PATCH net-next v11 14/16] net: phy: Only rely on phy_port for PHY-driven SFP Maxime Chevallier
2025-08-14 13:58 ` [PATCH net-next v11 15/16] net: phy: dp83822: Add SFP support through the phy_port interface Maxime Chevallier
2025-08-14 13:58 ` [PATCH net-next v11 16/16] Documentation: networking: Document the phy_port infrastructure Maxime Chevallier

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250814135832.174911-10-maxime.chevallier@bootlin.com \
    --to=maxime.chevallier@bootlin.com \
    --cc=andrew@lunn.ch \
    --cc=atenart@kernel.org \
    --cc=christophe.leroy@csgroup.eu \
    --cc=conor+dt@kernel.org \
    --cc=daniel@makrotopia.org \
    --cc=davem@davemloft.net \
    --cc=devicetree@vger.kernel.org \
    --cc=dimitri.fedrau@liebherr.com \
    --cc=edumazet@google.com \
    --cc=f.fainelli@gmail.com \
    --cc=herve.codina@bootlin.com \
    --cc=hkallweit1@gmail.com \
    --cc=horms@kernel.org \
    --cc=kabel@kernel.org \
    --cc=kory.maincent@bootlin.com \
    --cc=krzk+dt@kernel.org \
    --cc=kuba@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@armlinux.org.uk \
    --cc=mwojtas@chromium.org \
    --cc=netdev@vger.kernel.org \
    --cc=nicveronese@gmail.com \
    --cc=o.rempel@pengutronix.de \
    --cc=pabeni@redhat.com \
    --cc=robh@kernel.org \
    --cc=romain.gantois@bootlin.com \
    --cc=thomas.petazzoni@bootlin.com \
    --cc=vladimir.oltean@nxp.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).