From: Pankaj Patil <pankaj.patil@oss.qualcomm.com>
To: Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konradybcio@kernel.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>
Cc: linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
Pankaj Patil <pankaj.patil@oss.qualcomm.com>,
Sibi Sankar <sibi.sankar@oss.qualcomm.com>
Subject: [PATCH 24/24] arm64: dts: qcom: glymur: Add remoteprocs
Date: Thu, 25 Sep 2025 12:02:32 +0530 [thread overview]
Message-ID: <20250925-v3_glymur_introduction-v1-24-24b601bbecc0@oss.qualcomm.com> (raw)
In-Reply-To: <20250925-v3_glymur_introduction-v1-0-24b601bbecc0@oss.qualcomm.com>
From: Sibi Sankar <sibi.sankar@oss.qualcomm.com>
Add remoteproc PAS loader for ADSP, CDSP and SoCCP with its SMP2P nodes.
Signed-off-by: Sibi Sankar <sibi.sankar@oss.qualcomm.com>
Signed-off-by: Pankaj Patil <pankaj.patil@oss.qualcomm.com>
---
arch/arm64/boot/dts/qcom/glymur-crd.dts | 21 +++
arch/arm64/boot/dts/qcom/glymur.dtsi | 234 ++++++++++++++++++++++++++++++++
2 files changed, 255 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/glymur-crd.dts b/arch/arm64/boot/dts/qcom/glymur-crd.dts
index 100519aa5a7cd905285d3aa41ebe5f63ae00aeef..17c8f1a4f4061303982a210b7690783c96ef80b2 100644
--- a/arch/arm64/boot/dts/qcom/glymur-crd.dts
+++ b/arch/arm64/boot/dts/qcom/glymur-crd.dts
@@ -548,6 +548,27 @@ nvme_reg_en: nvme-reg-en-state {
};
};
+&remoteproc_adsp {
+ firmware-name = "qcom/glymur/adsp.mbn",
+ "qcom/glymur/adsp_dtb.mbn";
+
+ status = "okay";
+};
+
+&remoteproc_cdsp {
+ firmware-name = "qcom/glymur/cdsp.mbn",
+ "qcom/glymur/cdsp_dtb.mbn";
+
+ status = "okay";
+};
+
+&remoteproc_soccp {
+ firmware-name = "qcom/glymur/soccp.mbn",
+ "qcom/glymur/soccp_dtb.mbn";
+
+ status = "okay";
+};
+
&tlmm {
pcie5_default: pcie5-default-state {
clkreq-n-pins {
diff --git a/arch/arm64/boot/dts/qcom/glymur.dtsi b/arch/arm64/boot/dts/qcom/glymur.dtsi
index c48d3a70820e551822c5322761528159da127ca6..a131cd6c3d9e7f14ed1c4aef4b68e1860cc3bca5 100644
--- a/arch/arm64/boot/dts/qcom/glymur.dtsi
+++ b/arch/arm64/boot/dts/qcom/glymur.dtsi
@@ -782,6 +782,82 @@ smem_mem: smem-region@ffe00000 {
};
+ smp2p-adsp {
+ compatible = "qcom,smp2p";
+
+ interrupts-extended = <&ipcc GLYMUR_MPROC_LPASS
+ IPCC_MPROC_SIGNAL_SMP2P
+ IRQ_TYPE_EDGE_RISING>;
+
+ mboxes = <&ipcc GLYMUR_MPROC_LPASS IPCC_MPROC_SIGNAL_SMP2P>;
+
+ qcom,smem = <443>, <429>;
+ qcom,local-pid = <0>;
+ qcom,remote-pid = <2>;
+
+ smp2p_adsp_out: master-kernel {
+ qcom,entry-name = "master-kernel";
+ #qcom,smem-state-cells = <1>;
+ };
+
+ smp2p_adsp_in: slave-kernel {
+ qcom,entry-name = "slave-kernel";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
+ smp2p-cdsp {
+ compatible = "qcom,smp2p";
+
+ interrupts-extended = <&ipcc GLYMUR_MPROC_CDSP
+ IPCC_MPROC_SIGNAL_SMP2P
+ IRQ_TYPE_EDGE_RISING>;
+
+ mboxes = <&ipcc GLYMUR_MPROC_CDSP IPCC_MPROC_SIGNAL_SMP2P>;
+
+ qcom,smem = <94>, <432>;
+ qcom,local-pid = <0>;
+ qcom,remote-pid = <5>;
+
+ smp2p_cdsp_out: master-kernel {
+ qcom,entry-name = "master-kernel";
+ #qcom,smem-state-cells = <1>;
+ };
+
+ smp2p_cdsp_in: slave-kernel {
+ qcom,entry-name = "slave-kernel";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
+ smp2p-soccp {
+ compatible = "qcom,smp2p";
+
+ interrupts-extended = <&ipcc GLYMUR_MPROC_SOCCP
+ IPCC_MPROC_SIGNAL_SMP2P
+ IRQ_TYPE_EDGE_RISING>;
+
+ mboxes = <&ipcc GLYMUR_MPROC_SOCCP
+ IPCC_MPROC_SIGNAL_SMP2P>;
+
+ qcom,smem = <617>, <616>;
+ qcom,local-pid = <0>;
+ qcom,remote-pid = <19>;
+
+ soccp_smp2p_out: master-kernel {
+ qcom,entry-name = "master-kernel";
+ #qcom,smem-state-cells = <1>;
+ };
+
+ soccp_smp2p_in: slave-kernel {
+ qcom,entry-name = "slave-kernel";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
clk_virt: interconnect-0 {
compatible = "qcom,glymur-clk-virt";
#interconnect-cells = <2>;
@@ -2417,6 +2493,59 @@ &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
};
};
+ remoteproc_soccp: remoteproc-soccp@d00000 {
+ compatible = "qcom,glymur-soccp-pas", "qcom,kaanapali-soccp-pas";
+ reg = <0x0 0x00d00000 0x0 0x200000>;
+
+ interrupts-extended = <&intc GIC_SPI 167 IRQ_TYPE_EDGE_RISING>,
+ <&soccp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&soccp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&soccp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&soccp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
+ <&soccp_smp2p_in 9 IRQ_TYPE_EDGE_RISING>,
+ <&soccp_smp2p_in 10 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "wdog",
+ "fatal",
+ "ready",
+ "handover",
+ "stop-ack",
+ "pong",
+ "wake-ack";
+
+ clocks = <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "xo";
+
+ power-domains = <&rpmhpd RPMHPD_CX>,
+ <&rpmhpd RPMHPD_MX>;
+ power-domain-names = "cx",
+ "mx";
+
+ memory-region = <&soccp_mem>,
+ <&soccpdtb_mem>;
+
+ qcom,smem-states = <&soccp_smp2p_out 0>,
+ <&soccp_smp2p_out 10>,
+ <&soccp_smp2p_out 9>,
+ <&soccp_smp2p_out 8>;
+ qcom,smem-state-names = "stop",
+ "wakeup",
+ "sleep",
+ "ping";
+
+ status = "disabled";
+
+ glink-edge {
+ interrupts-extended = <&ipcc GLYMUR_MPROC_SOCCP
+ IPCC_MPROC_SIGNAL_GLINK_QMP
+ IRQ_TYPE_EDGE_RISING>;
+ mboxes = <&ipcc GLYMUR_MPROC_SOCCP
+ IPCC_MPROC_SIGNAL_GLINK_QMP>;
+ qcom,remote-pid = <19>;
+ label = "soccp";
+
+ };
+ };
+
usb_mp_hsphy0: phy@fa1000 {
compatible = "qcom,glymur-m31-eusb2-phy",
"qcom,sm8750-m31-eusb2-phy";
@@ -2944,6 +3073,57 @@ pcie5_phy: phy@1b50000 {
status = "disabled";
};
+ remoteproc_adsp: remoteproc@6800000 {
+ compatible = "qcom,glymur-adsp-pas", "qcom,sm8550-adsp-pas";
+ reg = <0x0 0x06800000 0x0 0x10000>;
+
+ iommus = <&apps_smmu 0x1000 0x0>;
+
+ interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_adsp_in 7 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "wdog",
+ "fatal",
+ "ready",
+ "handover",
+ "stop-ack",
+ "shutdown-ack";
+
+ clocks = <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "xo";
+
+ power-domains = <&rpmhpd RPMHPD_LCX>,
+ <&rpmhpd RPMHPD_LMX>;
+ power-domain-names = "lcx",
+ "lmx";
+
+ interconnects = <&lpass_lpicx_noc MASTER_LPASS_PROC QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+
+ memory-region = <&adspslpi_mem>, <&q6_adsp_dtb_mem>;
+
+ qcom,qmp = <&aoss_qmp>;
+
+ qcom,smem-states = <&smp2p_adsp_out 0>;
+ qcom,smem-state-names = "stop";
+
+ status = "disabled";
+
+ glink-edge {
+ interrupts-extended = <&ipcc GLYMUR_MPROC_LPASS
+ IPCC_MPROC_SIGNAL_GLINK_QMP
+ IRQ_TYPE_EDGE_RISING>;
+ mboxes = <&ipcc GLYMUR_MPROC_LPASS
+ IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+ label = "lpass";
+ qcom,remote-pid = <2>;
+ };
+ };
+
tcsr_mutex: hwlock@1f40000 {
compatible = "qcom,tcsr-mutex";
reg = <0x0 0x01f40000 0x0 0x20000>;
@@ -5311,6 +5491,60 @@ nsp_noc: interconnect@320c0000 {
#interconnect-cells = <2>;
};
+ remoteproc_cdsp: remoteproc@32300000 {
+ compatible = "qcom,glymur-cdsp-pas", "qcom,sm8550-cdsp-pas";
+ reg = <0x0 0x32300000 0x0 0x10000>;
+
+ iommus = <&apps_smmu 0x2000 0x400>;
+
+ interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_cdsp_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_cdsp_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_cdsp_in 3 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_cdsp_in 7 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "wdog",
+ "fatal",
+ "ready",
+ "handover",
+ "stop-ack",
+ "shutdown-ack";
+
+ clocks = <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "xo";
+
+ power-domains = <&rpmhpd RPMHPD_CX>,
+ <&rpmhpd RPMHPD_MXC>,
+ <&rpmhpd RPMHPD_NSP>;
+ power-domain-names = "cx",
+ "mxc",
+ "nsp";
+
+ interconnects = <&nsp_noc MASTER_CDSP_PROC QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+
+ memory-region = <&cdsp_mem>,
+ <&q6_cdsp_dtb_mem>;
+
+ qcom,qmp = <&aoss_qmp>;
+
+ qcom,smem-states = <&smp2p_cdsp_out 0>;
+ qcom,smem-state-names = "stop";
+
+ status = "disabled";
+
+ glink-edge {
+ interrupts-extended = <&ipcc GLYMUR_MPROC_CDSP
+ IPCC_MPROC_SIGNAL_GLINK_QMP
+ IRQ_TYPE_EDGE_RISING>;
+ mboxes = <&ipcc GLYMUR_MPROC_CDSP
+ IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+ label = "cdsp";
+ qcom,remote-pid = <5>;
+ };
+ };
+
sram: sram@81e08000 {
compatible = "mmio-sram";
reg = <0x0 0x81e08600 0x0 0x300>;
--
2.34.1
next prev parent reply other threads:[~2025-09-25 6:34 UTC|newest]
Thread overview: 131+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-09-25 6:32 [PATCH 00/24] arm64: dts: qcom: Introduce Glymur SoC dtsi and Glymur CRD dts Pankaj Patil
2025-09-25 6:32 ` [PATCH 01/24] dt-bindings: arm: qcom: Document Glymur SoC and board Pankaj Patil
2025-09-25 6:32 ` [PATCH 02/24] arm64: defconfig: Enable Glymur configs for boot to shell Pankaj Patil
2025-09-25 17:31 ` Dmitry Baryshkov
2025-10-08 11:26 ` Pankaj Patil
2025-10-08 12:56 ` Dmitry Baryshkov
2025-09-25 6:32 ` [PATCH 03/24] arm64: dts: qcom: Introduce Glymur base dtsi and CRD dts Pankaj Patil
2025-09-25 10:16 ` Konrad Dybcio
2025-10-29 10:00 ` Taniya Das
2025-10-29 10:36 ` Dmitry Baryshkov
2025-10-30 10:44 ` Taniya Das
2025-10-30 11:09 ` Dmitry Baryshkov
2025-10-30 17:10 ` Taniya Das
2025-09-25 13:02 ` Marc Zyngier
2025-10-08 11:30 ` Pankaj Patil
2025-09-25 17:44 ` Dmitry Baryshkov
2025-10-08 11:36 ` Pankaj Patil
2025-10-08 15:55 ` Dmitry Baryshkov
2025-10-10 7:50 ` Abel Vesa
2025-09-25 6:32 ` [PATCH 04/24] arm64: dts: qcom: glymur: Add QUPv3 configuration for serial engines Pankaj Patil
2025-09-25 10:18 ` Konrad Dybcio
2025-09-25 17:46 ` Dmitry Baryshkov
2025-10-15 10:28 ` Jyothi Kumar Seerapu
2025-10-15 13:33 ` Dmitry Baryshkov
2025-10-15 14:12 ` Jyothi Kumar Seerapu
2025-10-15 19:53 ` Dmitry Baryshkov
2025-10-20 11:54 ` Konrad Dybcio
[not found] ` <5931e2eb-5f2d-49bb-8b9c-b49f77d7fcbf@oss.qualcomm.com>
2025-10-30 10:56 ` Konrad Dybcio
2025-10-11 11:06 ` Abel Vesa
2025-10-11 11:11 ` Abel Vesa
2025-10-12 2:46 ` Krzysztof Kozlowski
2025-10-15 10:33 ` Jyothi Kumar Seerapu
2025-10-11 11:16 ` Abel Vesa
2025-10-15 10:53 ` Jyothi Kumar Seerapu
2025-09-25 6:32 ` [PATCH 05/24] arm64: dts: qcom: glymur: Add cpu idle states Pankaj Patil
2025-09-25 10:25 ` Konrad Dybcio
2025-10-13 9:29 ` Maulik Shah (mkshah)
2025-10-06 14:26 ` Krzysztof Kozlowski
2025-10-08 11:37 ` Pankaj Patil
2025-09-25 6:32 ` [PATCH 06/24] arm64: dts: qcom: glymur: Enable pdp0 mailbox Pankaj Patil
2025-09-25 8:23 ` Krzysztof Kozlowski
2025-09-25 17:06 ` Bjorn Andersson
2025-09-25 18:49 ` Dmitry Baryshkov
2025-09-25 10:29 ` Konrad Dybcio
2025-10-09 10:43 ` Sibi Sankar
2025-10-20 11:51 ` Konrad Dybcio
2025-09-25 6:32 ` [PATCH 07/24] arm64: dts: qcom: glymur: Enable cpu dvfs for CPU scaling Pankaj Patil
2025-09-25 8:06 ` Krzysztof Kozlowski
2025-09-25 17:26 ` Bjorn Andersson
2025-09-25 6:32 ` [PATCH 08/24] arm64: dts: qcom: glymur: Enable ipcc and aoss nodes Pankaj Patil
2025-09-25 11:00 ` Konrad Dybcio
2025-09-25 6:32 ` [PATCH 09/24] arm64: dts: qcom: glymur-crd: Add RPMH regulator rails Pankaj Patil
2025-09-25 11:01 ` Konrad Dybcio
2025-10-15 15:40 ` Kamal Wadhwa
2025-10-20 11:53 ` Konrad Dybcio
2025-09-25 17:09 ` Bjorn Andersson
2025-10-08 11:42 ` Pankaj Patil
2025-10-11 11:31 ` Abel Vesa
2025-10-11 15:56 ` Dmitry Baryshkov
2025-09-25 6:32 ` [PATCH 10/24] arm64: dts: qcom: glymur: Add SPMI PMIC arbiter device Pankaj Patil
2025-09-25 10:31 ` Konrad Dybcio
2025-10-06 14:27 ` Krzysztof Kozlowski
2025-09-25 6:32 ` [PATCH 11/24] arm64: dts: qcom: Add PMCX0102 pmic dtsi Pankaj Patil
2025-09-25 6:32 ` [PATCH 12/24] arm64: dts: qcom: Add SMB2370 " Pankaj Patil
2025-09-25 6:32 ` [PATCH 13/24] arm64: dts: qcom: Update pmh0104 dtsi for Glymur CRD Pankaj Patil
2025-09-25 6:32 ` [PATCH 14/24] arm64: dts: qcom: Update the pmh0110.dtsi for Glymur Pankaj Patil
2025-09-25 8:08 ` Krzysztof Kozlowski
2025-09-25 13:14 ` Dmitry Baryshkov
2025-09-25 13:34 ` Krzysztof Kozlowski
2025-09-25 14:00 ` Konrad Dybcio
2025-09-25 18:57 ` Dmitry Baryshkov
2025-10-08 7:31 ` Kamal Wadhwa
2025-10-08 8:02 ` Krzysztof Kozlowski
2025-10-08 11:25 ` Krzysztof Kozlowski
2025-10-10 11:26 ` Kamal Wadhwa
2025-10-08 9:15 ` Konrad Dybcio
2025-10-10 12:08 ` Aiqun(Maria) Yu
2025-09-25 6:32 ` [PATCH 15/24] arm64: dts: qcom: glymur: Add PMICs dtsi for CRD Pankaj Patil
2025-09-25 6:32 ` [PATCH 16/24] arm64: boot: dts: glymur-crd: Add Volume down/up keys support Pankaj Patil
2025-09-25 11:16 ` Konrad Dybcio
2025-10-01 13:48 ` Kamal Wadhwa
2025-10-06 8:56 ` Konrad Dybcio
2025-10-06 14:28 ` Krzysztof Kozlowski
2025-09-25 6:32 ` [PATCH 17/24] arm64: dts: qcom: glymur-crd: Avoid RTC probe failure Pankaj Patil
2025-09-25 8:11 ` Krzysztof Kozlowski
2025-10-01 12:23 ` Kamal Wadhwa
2025-10-06 14:28 ` Konrad Dybcio
2025-10-13 11:04 ` Kamal Wadhwa
2025-10-14 10:23 ` Konrad Dybcio
2025-10-14 12:36 ` Kamal Wadhwa
2025-10-14 19:52 ` Dmitry Baryshkov
2025-10-20 11:54 ` Konrad Dybcio
2025-10-06 14:32 ` Krzysztof Kozlowski
2025-09-25 6:32 ` [PATCH 18/24] arm64: dts: qcom: glymur: Add PMIC glink node Pankaj Patil
2025-09-25 8:13 ` Krzysztof Kozlowski
2025-09-25 10:32 ` Konrad Dybcio
2025-10-08 11:55 ` Pankaj Patil
2025-11-03 10:26 ` Kamal Wadhwa
2025-11-10 14:06 ` Kamal Wadhwa
2025-11-12 14:13 ` Konrad Dybcio
2025-09-25 6:32 ` [PATCH 19/24] arm64: dts: qcom: glymur: Add support for PCIe5 Pankaj Patil
2025-09-25 8:15 ` Krzysztof Kozlowski
2025-09-25 11:32 ` Konrad Dybcio
2025-10-10 7:02 ` Qiang Yu
2025-10-08 13:36 ` Abel Vesa
2025-10-10 7:08 ` Qiang Yu
2025-10-11 11:43 ` Abel Vesa
2025-10-11 15:57 ` Dmitry Baryshkov
2025-10-11 18:12 ` Abel Vesa
2025-09-25 6:32 ` [PATCH 20/24] arm64: dts: qcom: glymur-crd: Add power supply and sideband signal for pcie5 Pankaj Patil
2025-09-25 11:09 ` Konrad Dybcio
2025-10-09 9:53 ` Abel Vesa
2025-10-10 7:13 ` Qiang Yu
2025-09-25 6:32 ` [PATCH 21/24] arm64: dts: qcom: glymur: Enable tsens and thermal zone nodes Pankaj Patil
2025-09-25 11:15 ` Konrad Dybcio
2025-11-19 13:10 ` Manaf Meethalavalappu Pallikunhi
2025-09-25 6:32 ` [PATCH 22/24] arm64: dts: qcom: glymur: Add display clock controller device Pankaj Patil
2025-09-25 8:18 ` Krzysztof Kozlowski
2025-09-29 3:57 ` Taniya Das
2025-09-25 10:33 ` Konrad Dybcio
2025-09-29 3:54 ` Taniya Das
2025-10-09 5:12 ` Taniya Das
2025-10-09 8:30 ` Konrad Dybcio
2025-09-25 6:32 ` [PATCH 23/24] arm64: dts: qcom: glymur: Add USB support Pankaj Patil
2025-09-25 11:06 ` Konrad Dybcio
2025-09-25 13:19 ` Abel Vesa
2025-11-03 15:26 ` Abel Vesa
2025-11-03 17:00 ` Abel Vesa
2025-09-25 6:32 ` Pankaj Patil [this message]
2025-09-25 17:30 ` [PATCH 00/24] arm64: dts: qcom: Introduce Glymur SoC dtsi and Glymur CRD dts Dmitry Baryshkov
2025-10-08 12:18 ` Pankaj Patil
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250925-v3_glymur_introduction-v1-24-24b601bbecc0@oss.qualcomm.com \
--to=pankaj.patil@oss.qualcomm.com \
--cc=andersson@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=konradybcio@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh@kernel.org \
--cc=sibi.sankar@oss.qualcomm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).