linux-arm-msm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Pankaj Patil <pankaj.patil@oss.qualcomm.com>
To: Bjorn Andersson <andersson@kernel.org>,
	Konrad Dybcio <konradybcio@kernel.org>,
	Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>
Cc: linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	Pankaj Patil <pankaj.patil@oss.qualcomm.com>,
	Kamal Wadhwa <kamal.wadhwa@oss.qualcomm.com>
Subject: [PATCH v2 15/24] arm64: dts: qcom: glymur: Add PMICs dtsi for CRD
Date: Thu, 25 Sep 2025 11:58:21 +0530	[thread overview]
Message-ID: <20250925-v3_glymur_introduction-v2-15-8e1533a58d2d@oss.qualcomm.com> (raw)
In-Reply-To: <20250925-v3_glymur_introduction-v2-0-8e1533a58d2d@oss.qualcomm.com>

From: Kamal Wadhwa <kamal.wadhwa@oss.qualcomm.com>

Include all the PMICs present on the Glymur board into
the glymur CRD DTS file.

Signed-off-by: Kamal Wadhwa <kamal.wadhwa@oss.qualcomm.com>
Signed-off-by: Pankaj Patil <pankaj.patil@oss.qualcomm.com>
---
 arch/arm64/boot/dts/qcom/glymur-crd.dts    |  1 +
 arch/arm64/boot/dts/qcom/glymur-pmics.dtsi | 19 +++++++++++++++++++
 2 files changed, 20 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/glymur-crd.dts b/arch/arm64/boot/dts/qcom/glymur-crd.dts
index e89b81dcb4f47b78307fa3ab6831657cf6491c89..97f6eedd7222368f5cbfdd02e9c4d87261d7f19a 100644
--- a/arch/arm64/boot/dts/qcom/glymur-crd.dts
+++ b/arch/arm64/boot/dts/qcom/glymur-crd.dts
@@ -6,6 +6,7 @@
 /dts-v1/;
 
 #include "glymur.dtsi"
+#include "glymur-pmics.dtsi"
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
 
 / {
diff --git a/arch/arm64/boot/dts/qcom/glymur-pmics.dtsi b/arch/arm64/boot/dts/qcom/glymur-pmics.dtsi
new file mode 100644
index 0000000000000000000000000000000000000000..59dcfb67a203a7c576406037377fc9fbdce51a97
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/glymur-pmics.dtsi
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
+ */
+
+#define PMH0110_F_E0	0x5
+#define PMH0110_H_E0	0x7
+#define PMH0104_I_E0	0x8
+#define PMH0104_J_E0	0x9
+
+#define PMH0110_F_E1	0x5
+#define PMH0104_L_E1	0xb
+
+#include "pmk8850.dtsi"	/* SPMI0: SID-0*/
+#include "pmh0101.dtsi"	/* SPMI0: SID-1*/
+#include "pmcx0102.dtsi"	/* SPMI0: SID-2/3/4/6	SPMI1: SID-2/3/4 */
+#include "pmh0110.dtsi"	/* SPMI0: SID-5/7	SPMI1: SID-5	*/
+#include "pmh0104.dtsi"	/* SPMI0: SID-8/9	SPMI1: SID-11	*/
+#include "smb2370.dtsi"	/* SPMI2: SID-9/10/11*/

-- 
2.34.1


  parent reply	other threads:[~2025-09-25  6:29 UTC|newest]

Thread overview: 43+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-09-25  6:28 [PATCH v2 00/24] arm64: dts: qcom: Introduce Glymur SoC dtsi and Glymur CRD dts Pankaj Patil
2025-09-25  6:28 ` [PATCH v2 01/24] dt-bindings: arm: qcom: Document Glymur SoC and board Pankaj Patil
2025-09-25  6:28 ` [PATCH v2 02/24] arm64: defconfig: Enable Glymur configs for boot to shell Pankaj Patil
2025-09-25 21:09   ` Dmitry Baryshkov
2025-09-25  6:28 ` [PATCH v2 03/24] arm64: dts: qcom: Introduce Glymur base dtsi and CRD dts Pankaj Patil
2025-09-25  6:28 ` [PATCH v2 04/24] arm64: dts: qcom: glymur: Add QUPv3 configuration for serial engines Pankaj Patil
2025-09-25 21:16   ` Dmitry Baryshkov
2025-10-15 10:47     ` Jyothi Kumar Seerapu
2025-09-25  6:28 ` [PATCH v2 05/24] arm64: dts: qcom: glymur: Add cpu idle states Pankaj Patil
2025-09-25  6:28 ` [PATCH v2 06/24] arm64: dts: qcom: glymur: Enable pdp0 mailbox Pankaj Patil
2025-09-25  6:28 ` [PATCH v2 07/24] arm64: dts: qcom: glymur: Enable cpu dvfs for CPU scaling Pankaj Patil
2025-09-25  6:28 ` [PATCH v2 08/24] arm64: dts: qcom: glymur: Enable ipcc and aoss nodes Pankaj Patil
2025-09-25  6:28 ` [PATCH v2 09/24] arm64: dts: qcom: glymur-crd: Add RPMH regulator rails Pankaj Patil
2025-09-25  6:28 ` [PATCH v2 10/24] arm64: dts: qcom: glymur: Add SPMI PMIC arbiter device Pankaj Patil
2025-09-25  6:28 ` [PATCH v2 11/24] arm64: dts: qcom: Add PMCX0102 pmic dtsi Pankaj Patil
2025-09-25  6:28 ` [PATCH v2 12/24] arm64: dts: qcom: Add SMB2370 " Pankaj Patil
2025-09-25  6:28 ` [PATCH v2 13/24] arm64: dts: qcom: Update pmh0104 dtsi for Glymur CRD Pankaj Patil
2025-09-25  7:55   ` Krzysztof Kozlowski
2025-09-26  7:07     ` Pankaj Patil
2025-09-26  8:55       ` Konrad Dybcio
2025-09-25  6:28 ` [PATCH v2 14/24] arm64: dts: qcom: Update the pmh0110.dtsi for Glymur Pankaj Patil
2025-09-25  6:28 ` Pankaj Patil [this message]
2025-09-25  8:15   ` [PATCH v2 15/24] arm64: dts: qcom: glymur: Add PMICs dtsi for CRD Abel Vesa
2025-09-30 14:22     ` Kamal Wadhwa
2025-09-25  6:28 ` [PATCH v2 16/24] arm64: boot: dts: glymur-crd: Add Volume down/up keys support Pankaj Patil
2025-09-25 13:45   ` Krzysztof Kozlowski
2025-09-25  6:28 ` [PATCH v2 17/24] arm64: dts: qcom: glymur-crd: Avoid RTC probe failure Pankaj Patil
2025-09-25  6:28 ` [PATCH v2 18/24] arm64: dts: qcom: glymur: Add PMIC glink node Pankaj Patil
2025-09-25  6:28 ` [PATCH v2 19/24] arm64: dts: qcom: glymur: Add support for PCIe5 Pankaj Patil
2025-09-25  6:28 ` [PATCH v2 20/24] arm64: dts: qcom: glymur-crd: Add power supply and sideband signal for pcie5 Pankaj Patil
2025-09-25  6:28 ` [PATCH v2 21/24] arm64: dts: qcom: glymur: Enable tsens and thermal zone nodes Pankaj Patil
2025-09-25  6:28 ` [PATCH v2 22/24] arm64: dts: qcom: glymur: Add display clock controller device Pankaj Patil
2025-09-25  6:28 ` [PATCH v2 23/24] arm64: dts: qcom: glymur: Add USB support Pankaj Patil
2025-09-25  8:06   ` Abel Vesa
2025-09-25 10:54   ` Abel Vesa
2025-09-25 10:59     ` Konrad Dybcio
2025-09-25 11:29       ` Abel Vesa
2025-09-26  1:09       ` Wesley Cheng
2025-10-01  8:42         ` Konrad Dybcio
2025-09-25 20:42   ` Dmitry Baryshkov
2025-09-25  6:28 ` [PATCH v2 24/24] arm64: dts: qcom: glymur: Add remoteprocs Pankaj Patil
2025-09-25  6:35 ` [PATCH v2 00/24] arm64: dts: qcom: Introduce Glymur SoC dtsi and Glymur CRD dts Pankaj Patil
2025-09-25 21:06 ` Dmitry Baryshkov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250925-v3_glymur_introduction-v2-15-8e1533a58d2d@oss.qualcomm.com \
    --to=pankaj.patil@oss.qualcomm.com \
    --cc=andersson@kernel.org \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=kamal.wadhwa@oss.qualcomm.com \
    --cc=konradybcio@kernel.org \
    --cc=krzk+dt@kernel.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=robh@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).