[PATCH v2 0/2] arm64: dts: qcom: msm8939-asus-z00t: add initial device tree

[PATCH v2 0/2] arm64: dts: qcom: msm8939-asus-z00t: add initial device tree

[Erikas Bitovtas]

This dts adds support for Asus ZenFone 2 Laser/Selfie (1080p) smartphone released in 2015.

Add an initial device tree support for Z00T with support for:
- GPIO keys 
- SDHCI (Internal and external storage)
- WCNSS (WiFi/BT)
- Sensors (accelerometer and magnetometer)
- Touchscreen 
- Audio input and output
- Vibrator
---
Changes in v2:
- added customary newline before 'status' properties
- removed odd newlines in pin configuration nodes
- reordered pin configuration nodes by their 'pins' properties
Link to v1: https://lore.kernel.org/linux-arm-msm/20250930132556.266434-1-xerikasxx@gmail.com/

Erikas Bitovtas (2):
  dt-bindings: arm: qcom: Add Asus ZenFone 2 Laser/Selfie
  arm64: dts: qcom: msm8939-asus-z00t: add initial device tree

 .../devicetree/bindings/arm/qcom.yaml         |   1 +
 arch/arm64/boot/dts/qcom/Makefile             |   1 +
 .../arm64/boot/dts/qcom/msm8939-asus-z00t.dts | 256 ++++++++++++++++++
 3 files changed, 258 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/msm8939-asus-z00t.dts

-- 
2.51.0

[PATCH v2 1/2] dt-bindings: arm: qcom: Add Asus ZenFone 2 Laser/Selfie

[Erikas Bitovtas]

Add a compatible for Asus ZenFone 2 Laser/Selfie (1080p)

Signed-off-by: Erikas Bitovtas <xerikasxx@gmail.com>
---
 Documentation/devicetree/bindings/arm/qcom.yaml | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml
index 18b5ed044f9f..1ad77a68fc11 100644
--- a/Documentation/devicetree/bindings/arm/qcom.yaml
+++ b/Documentation/devicetree/bindings/arm/qcom.yaml
@@ -88,6 +88,7 @@ properties:
 
       - items:
           - enum:
+              - asus,z00t
               - huawei,kiwi
               - longcheer,l9100
               - samsung,a7
-- 
2.51.0

[PATCH v2 2/2] arm64: dts: qcom: msm8939-asus-z00t: add initial device tree

[Erikas Bitovtas]

Add an initial device tree for Asus ZenFone 2 Laser/Selfie. This
includes support for:
- UART
- USB
- Internal storage
- MicroSD
- Volume keys
- Touchscreen: Focaltech FT5306
- Accelerometer: Invensense MPU6515
- Magnetometer: Asahi Kasei AK09911
- Vibrator
- Audio input and output
- Modem

Signed-off-by: Erikas Bitovtas <xerikasxx@gmail.com>

---
 arch/arm64/boot/dts/qcom/Makefile             |   1 +
 .../arm64/boot/dts/qcom/msm8939-asus-z00t.dts | 256 ++++++++++++++++++
 2 files changed, 257 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/msm8939-asus-z00t.dts

diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 296688f7cb26..35f3ff0d6f18 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -72,6 +72,7 @@ dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-wingtech-wt88047.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-yiming-uz801v3.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8917-xiaomi-riva.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8929-wingtech-wt82918hd.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8939-asus-z00t.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8939-huawei-kiwi.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8939-longcheer-l9100.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8939-samsung-a7.dtb
diff --git a/arch/arm64/boot/dts/qcom/msm8939-asus-z00t.dts b/arch/arm64/boot/dts/qcom/msm8939-asus-z00t.dts
new file mode 100644
index 000000000000..ebb548e62e02
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8939-asus-z00t.dts
@@ -0,0 +1,256 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+/dts-v1/;
+
+#include "msm8939-pm8916.dtsi"
+#include "msm8916-modem-qdsp6.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Asus ZenFone 2 Laser/Selfie (1080p)";
+	compatible = "asus,z00t", "qcom,msm8939";
+	chassis-type = "handset";
+
+	aliases {
+		mmc0 = &sdhc_1;
+		mmc1 = &sdhc_2;
+		serial0 = &blsp_uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&gpio_keys_default>;
+		pinctrl-names = "default";
+
+		button-volume-up {
+			label = "Volume Up";
+			gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <15>;
+		};
+
+		button-volume-down {
+			label = "Volume Down";
+			gpios = <&tlmm 117 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			debounce-interval = <15>;
+		};
+	};
+
+	reg_sd_vmmc: regulator-sdcard-vmmc {
+		compatible = "regulator-fixed";
+		regulator-name = "sdcard-vmmc";
+		regulator-min-microvolt = <2950000>;
+		regulator-max-microvolt = <2950000>;
+
+		gpio = <&tlmm 87 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		startup-delay-us = <200>;
+
+		pinctrl-0 = <&sd_vmmc_en_default>;
+		pinctrl-names = "default";
+	};
+
+	usb_id: usb-id {
+		compatible = "linux,extcon-usb-gpio";
+		id-gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&usb_id_default>;
+		pinctrl-names = "default";
+	};
+};
+
+&blsp_i2c2 {
+	status = "okay";
+
+	magnetometer@c {
+		compatible = "asahi-kasei,ak09911";
+		reg = <0x0c>;
+
+		vdd-supply = <&pm8916_l8>;
+		vid-supply = <&pm8916_l6>;
+
+		reset-gpios = <&tlmm 112 GPIO_ACTIVE_LOW>;
+		pinctrl-0 = <&mag_reset_default>;
+		pinctrl-names = "default";
+	};
+
+	imu@68 {
+		compatible = "invensense,mpu6515";
+		reg = <0x68>;
+
+		interrupts-extended = <&tlmm 36 IRQ_TYPE_EDGE_RISING>;
+
+		vdd-supply = <&pm8916_l8>;
+		vddio-supply = <&pm8916_l6>;
+
+		pinctrl-0 = <&imu_default>;
+		pinctrl-names = "default";
+
+		mount-matrix = "0",  "1", "0",
+			       "-1", "0", "0",
+			       "0",  "0", "1";
+	};
+};
+
+&blsp_i2c5 {
+	status = "okay";
+
+	touchscreen@38 {
+		compatible = "edt,edt-ft5306";
+		reg = <0x38>;
+
+		interrupts-extended = <&tlmm 13 IRQ_TYPE_EDGE_FALLING>;
+
+		reset-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>;
+
+		vcc-supply = <&pm8916_l8>;
+		iovcc-supply = <&pm8916_l6>;
+
+		touchscreen-size-x = <1080>;
+		touchscreen-size-y = <1920>;
+
+		pinctrl-0 = <&touchscreen_default>;
+		pinctrl-names = "default";
+	};
+};
+
+&blsp_uart2 {
+	pinctrl-0 = <&blsp_uart2_console_default>;
+	pinctrl-1 = <&blsp_uart2_console_sleep>;
+	pinctrl-names = "default", "sleep";
+
+	status = "okay";
+};
+
+&mpss_mem {
+	reg = <0x0 0x86800000 0x0 0x5500000>;
+};
+
+&pm8916_codec {
+	qcom,micbias-lvl = <2800>;
+	qcom,mbhc-vthreshold-low = <75 150 237 450 500>;
+	qcom,mbhc-vthreshold-high = <75 150 237 450 500>;
+	qcom,micbias1-ext-cap;
+	qcom,hphl-jack-type-normally-open;
+
+	status = "okay";
+};
+
+&pm8916_vib {
+	status = "okay";
+};
+
+&sdhc_1 {
+	status = "okay";
+};
+
+&sdhc_2 {
+	vmmc-supply = <&reg_sd_vmmc>;
+
+	pinctrl-0 = <&sdc2_default &sdc2_cd_default>;
+	pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>;
+	pinctrl-names = "default", "sleep";
+	cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
+
+	status = "okay";
+};
+
+&sound {
+	audio-routing =
+		"AMIC1", "MIC BIAS External1",
+		"AMIC2", "MIC BIAS Internal2",
+		"AMIC3", "MIC BIAS External1";
+
+	status = "okay";
+};
+
+&usb {
+	extcon = <&usb_id>, <&usb_id>;
+
+	status = "okay";
+};
+
+&usb_hs_phy {
+	extcon = <&usb_id>;
+};
+
+&wcnss {
+	status = "okay";
+};
+
+&wcnss_iris {
+	compatible = "qcom,wcn3660b";
+};
+
+&wcnss_mem {
+	status = "okay";
+};
+
+&tlmm {
+	touchscreen_default: touchscreen-default-state {
+		reset-pins {
+			pins = "gpio12";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		touch-pins {
+			pins = "gpio13";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	imu_default: imu-default-state {
+		pins = "gpio36";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	sdc2_cd_default: sdc2-cd-default-state {
+		pins = "gpio38";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	sd_vmmc_en_default: sd-vmmc-en-default-state {
+		pins = "gpio87";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	gpio_keys_default: gpio-keys-default-state {
+		pins = "gpio107", "gpio117";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	usb_id_default: usb-id-default-state {
+		pins = "gpio110";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+
+	mag_reset_default: mag-reset-default-state {
+		pins = "gpio112";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
-- 
2.51.0

Re: [PATCH v2 2/2] arm64: dts: qcom: msm8939-asus-z00t: add initial device tree

[Dmitry Baryshkov]

On Wed, Oct 08, 2025 at 09:20:20PM +0300, Erikas Bitovtas wrote:
> Add an initial device tree for Asus ZenFone 2 Laser/Selfie. This
> includes support for:
> - UART
> - USB
> - Internal storage
> - MicroSD
> - Volume keys
> - Touchscreen: Focaltech FT5306
> - Accelerometer: Invensense MPU6515
> - Magnetometer: Asahi Kasei AK09911
> - Vibrator
> - Audio input and output
> - Modem
> 
> Signed-off-by: Erikas Bitovtas <xerikasxx@gmail.com>
> 
> ---
>  arch/arm64/boot/dts/qcom/Makefile             |   1 +
>  .../arm64/boot/dts/qcom/msm8939-asus-z00t.dts | 256 ++++++++++++++++++
>  2 files changed, 257 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/qcom/msm8939-asus-z00t.dts
> 

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>


-- 
With best wishes
Dmitry

Re: [PATCH v2 1/2] dt-bindings: arm: qcom: Add Asus ZenFone 2 Laser/Selfie

[Krzysztof Kozlowski]

On 09/10/2025 03:20, Erikas Bitovtas wrote:
> Add a compatible for Asus ZenFone 2 Laser/Selfie (1080p)
> 
> Signed-off-by: Erikas Bitovtas <xerikasxx@gmail.com>
> ---

<form letter>
This is a friendly reminder during the review process.

It looks like you received a tag and forgot to add it.

If you do not know the process, here is a short explanation:
Please add Acked-by/Reviewed-by/Tested-by tags when posting new versions
of patchset, under or above your Signed-off-by tag, unless patch changed
significantly (e.g. new properties added to the DT bindings). Tag is
"received", when provided in a message replied to you on the mailing
list. Tools like b4 can help here. However, there's no need to repost
patches *only* to add the tags. The upstream maintainer will do that for
tags received on the version they apply.

Please read:
https://elixir.bootlin.com/linux/v6.12-rc3/source/Documentation/process/submitting-patches.rst#L577

If a tag was not added on purpose, please state why and what changed.
</form letter>

Best regards,
Krzysztof

Re: [PATCH v2 2/2] arm64: dts: qcom: msm8939-asus-z00t: add initial device tree

[Krzysztof Kozlowski]

On 09/10/2025 03:20, Erikas Bitovtas wrote:
> Add an initial device tree for Asus ZenFone 2 Laser/Selfie. This
> includes support for:
> - UART
> - USB
> - Internal storage
> - MicroSD
> - Volume keys

<form letter>
This is a friendly reminder during the review process.

It looks like you received a tag and forgot to add it.

If you do not know the process, here is a short explanation:
Please add Acked-by/Reviewed-by/Tested-by tags when posting new versions
of patchset, under or above your Signed-off-by tag, unless patch changed
significantly (e.g. new properties added to the DT bindings). Tag is
"received", when provided in a message replied to you on the mailing
list. Tools like b4 can help here. However, there's no need to repost
patches *only* to add the tags. The upstream maintainer will do that for
tags received on the version they apply.

Please read:
https://elixir.bootlin.com/linux/v6.12-rc3/source/Documentation/process/submitting-patches.rst#L577

If a tag was not added on purpose, please state why and what changed.
</form letter>

Best regards,
Krzysztof

Re: [PATCH v2 0/2] arm64: dts: qcom: msm8939-asus-z00t: add initial device tree

[Rob Herring (Arm)]

On Wed, 08 Oct 2025 21:20:18 +0300, Erikas Bitovtas wrote:
> This dts adds support for Asus ZenFone 2 Laser/Selfie (1080p) smartphone released in 2015.
> 
> Add an initial device tree support for Z00T with support for:
> - GPIO keys
> - SDHCI (Internal and external storage)
> - WCNSS (WiFi/BT)
> - Sensors (accelerometer and magnetometer)
> - Touchscreen
> - Audio input and output
> - Vibrator
> ---
> Changes in v2:
> - added customary newline before 'status' properties
> - removed odd newlines in pin configuration nodes
> - reordered pin configuration nodes by their 'pins' properties
> Link to v1: https://lore.kernel.org/linux-arm-msm/20250930132556.266434-1-xerikasxx@gmail.com/
> 
> Erikas Bitovtas (2):
>   dt-bindings: arm: qcom: Add Asus ZenFone 2 Laser/Selfie
>   arm64: dts: qcom: msm8939-asus-z00t: add initial device tree
> 
>  .../devicetree/bindings/arm/qcom.yaml         |   1 +
>  arch/arm64/boot/dts/qcom/Makefile             |   1 +
>  .../arm64/boot/dts/qcom/msm8939-asus-z00t.dts | 256 ++++++++++++++++++
>  3 files changed, 258 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/qcom/msm8939-asus-z00t.dts
> 
> --
> 2.51.0
> 
> 
> 


My bot found new DTB warnings on the .dts files added or changed in this
series.

Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings
are fixed by another series. Ultimately, it is up to the platform
maintainer whether these warnings are acceptable or not. No need to reply
unless the platform maintainer has comments.

If you already ran DT checks and didn't see these error(s), then
make sure dt-schema is up to date:

  pip3 install dtschema --upgrade


This patch series was applied (using b4) to base:
 Base: attempting to guess base-commit...
 Base: remotes/arm-soc/qcom/dt64-51-gc11645afb0e2 (best guess, 1/2 blobs matched)
 Base: remotes/arm-soc/qcom/dt64-51-gc11645afb0e2 (use --merge-base to override)

If this is not the correct base, please add 'base-commit' tag
(or use b4 which does this automatically)

New warnings running 'make CHECK_DTBS=y for arch/arm64/boot/dts/qcom/' for 20251008182106.217340-1-xerikasxx@gmail.com:

arch/arm64/boot/dts/qcom/msm8939-asus-z00t.dtb: iommu@1f08000 (qcom,msm8916-iommu): clock-names: ['iface', 'bus', 'tbu'] is too long
	from schema $id: http://devicetree.org/schemas/iommu/qcom,iommu.yaml#
arch/arm64/boot/dts/qcom/msm8939-asus-z00t.dtb: iommu@1f08000 (qcom,msm8916-iommu): clocks: [[31, 129], [31, 140], [31, 175]] is too long
	from schema $id: http://devicetree.org/schemas/iommu/qcom,iommu.yaml#

Re: [PATCH v2 0/2] arm64: dts: qcom: msm8939-asus-z00t: add initial device tree

[Bjorn Andersson]

On Wed, 08 Oct 2025 21:20:18 +0300, Erikas Bitovtas wrote:
> This dts adds support for Asus ZenFone 2 Laser/Selfie (1080p) smartphone released in 2015.
> 
> Add an initial device tree support for Z00T with support for:
> - GPIO keys
> - SDHCI (Internal and external storage)
> - WCNSS (WiFi/BT)
> - Sensors (accelerometer and magnetometer)
> - Touchscreen
> - Audio input and output
> - Vibrator
> 
> [...]

Applied, thanks!

[1/2] dt-bindings: arm: qcom: Add Asus ZenFone 2 Laser/Selfie
      commit: bc42d98593535ccca739f67d9b9cb859f4e13304
[2/2] arm64: dts: qcom: msm8939-asus-z00t: add initial device tree
      commit: 42621cbb3afd47e1e3000abe2da8ac33286fff4f

Best regards,
-- 
Bjorn Andersson <andersson@kernel.org>