From mboxrd@z Thu Jan 1 00:00:00 1970 Received: from mail-m49230.qiye.163.com (mail-m49230.qiye.163.com [45.254.49.230]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 015F6231832 for ; Sat, 25 Oct 2025 12:28:46 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=45.254.49.230 ARC-Seal:i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1761395335; cv=none; b=qTpNy+nKjsIhYOKTQb04NW9Tpbcmi1mc0Z7vjFr0Gbi3MEdcHYp05XaZmcYhKUdnhn/uaa6w6PfzOnyKTh/BonSW+bRvmoQvlXQ/nq0q090SQ6TVvz4GQpbm1ckviV+lsouYHeV0LREBpvQ5f2RVJRUWo5WVzOO36YteiTWQPFw= ARC-Message-Signature:i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1761395335; c=relaxed/simple; bh=yS2l+y6GdS8XcKJmxpcruJ39SrCSBnxvkHH9E4zxZfg=; h=From:To:Cc:Subject:Date:Message-ID:In-Reply-To:References: MIME-Version; b=NsOnEkqJ6cZhB1EdJ3kllaD3OxDpRsioi+Hj4kPVVShXmhG1JunYp5stTFa37XLKau5Vyc1gr/Ba3+mCRiO8ByYMaLlKCbUY97VTxaYV9Gq3vtdC030BOfplle5p9XL6joZIxJICtGcoo2Ye8+sJuSQwYJ2ZsNgrWBQuBDU9+K8= ARC-Authentication-Results:i=1; smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=thundersoft.com; spf=pass smtp.mailfrom=thundersoft.com; dkim=pass (1024-bit key) header.d=thundersoft.com header.i=@thundersoft.com header.b=gQVw7qUz; arc=none smtp.client-ip=45.254.49.230 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=thundersoft.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=thundersoft.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (1024-bit key) header.d=thundersoft.com header.i=@thundersoft.com header.b="gQVw7qUz" Received: from ROG.lan (unknown [42.84.42.192]) by smtp.qiye.163.com (Hmail) with ESMTP id 272925c52; Sat, 25 Oct 2025 20:28:36 +0800 (GMT+08:00) From: Hongyang Zhao To: linux-arm-msm@vger.kernel.org Cc: casey.connolly@linaro.org, christopher.obbard@linaro.org, loic.minier@oss.qualcomm.com, andersson@kernel.org, Hongyang Zhao , Roger Shimizu Subject: [PATCH v5 1/2] arm64: dts: qcom: rubikpi3: Add qcs6490-rubikpi3 board dts Date: Sat, 25 Oct 2025 20:27:22 +0800 Message-ID: <20251025122724.633766-2-hongyang.zhao@thundersoft.com> X-Mailer: git-send-email 2.43.0 In-Reply-To: <20251025122724.633766-1-hongyang.zhao@thundersoft.com> References: <20251025122724.633766-1-hongyang.zhao@thundersoft.com> Precedence: bulk X-Mailing-List: linux-arm-msm@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-HM-Tid: 0a9a1b57981a09d5kunmb045701c5eabce X-HM-MType: 1 X-HM-Spam-Status: e1kfGhgUHx5ZQUpXWQgPGg8OCBgUHx5ZQUlOS1dZFg8aDwILHllBWSg2Ly tZV1koWUFITzdXWS1ZQUlXWQ8JGhUIEh9ZQVkZT00dVklCSEpPTE5DQhpMTFYVFAkWGhdVEwETFh oSFyQUDg9ZV1kYEgtZQVlPSVVDT1VPSVVKQklZV1kWGg8SFR0UWUFZT0tIVUpLSU9PT0hVSktLVU pCS0tZBg++ DKIM-Signature: a=rsa-sha256; b=gQVw7qUzN7AnNMDI87mZ/q9IuApGh9yMZ9/Unyu9eTJmeojXDO07ntRCqaPOGWlIr4J0HInM4Vyp3ORt2LbRhvDIXOylU4jNhb9UrP8p5pD1pn4wSNflTSdfMoTfCm5/ZGPZGJMyn1ZsHbfLYVS67S4kUeakEYcDeS+l4ImNkk8=; s=default; c=relaxed/relaxed; d=thundersoft.com; v=1; bh=+TidIAuZ4s9mJjZwh2Ed3JbnsQ+7SeJZitWnhs3YIiE=; h=date:mime-version:subject:message-id:from; Add DTS for Thundercomm qcs6490-rubikpi3 board which uses QCS6490 SoC. Works: - Bluetooth (AP6256) - Wi-Fi (AP6256) - Ethernet (AX88179B connected to UPD720201) - FAN - Two USB Type-A 3.0 ports (UPD720201 connected to PCIe0) - M.2 M-Key 2280 PCIe 3.0 - RTC - USB Type-C - USB Type-A 2.0 port - 40PIN: I2C x1, UART x1 Signed-off-by: Hongyang Zhao Reviewed-by: Roger Shimizu Cc: Casey Connolly Cc: Christopher Obbard Cc: Loic Minier --- arch/arm64/boot/dts/qcom/Makefile | 1 + .../dts/qcom/qcs6490-thundercomm-rubikpi3.dts | 1390 +++++++++++++++++ 2 files changed, 1391 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/qcs6490-thundercomm-rubikpi3.dts diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index 296688f7cb26..74938791f62d 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -133,6 +133,7 @@ qcs6490-rb3gen2-industrial-mezzanine-dtbs := qcs6490-rb3gen2.dtb qcs6490-rb3gen2 dtb-$(CONFIG_ARCH_QCOM) += qcs6490-rb3gen2-industrial-mezzanine.dtb dtb-$(CONFIG_ARCH_QCOM) += qcs6490-rb3gen2-vision-mezzanine.dtb +dtb-$(CONFIG_ARCH_QCOM) += qcs6490-thundercomm-rubikpi3.dtb dtb-$(CONFIG_ARCH_QCOM) += qcs8300-ride.dtb dtb-$(CONFIG_ARCH_QCOM) += qcs8550-aim300-aiot.dtb dtb-$(CONFIG_ARCH_QCOM) += qcs9100-ride.dtb diff --git a/arch/arm64/boot/dts/qcom/qcs6490-thundercomm-rubikpi3.dts b/arch/arm64/boot/dts/qcom/qcs6490-thundercomm-rubikpi3.dts new file mode 100644 index 000000000000..e08c2afbf849 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/qcs6490-thundercomm-rubikpi3.dts @@ -0,0 +1,1390 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2025, Thundercomm All rights reserved. + */ + +/dts-v1/; + +/* PM7250B is configured to use SID8/9 */ +#define PM7250B_SID 8 +#define PM7250B_SID1 9 + +#include +#include +#include +#include +#include +#include "sc7280.dtsi" +#include "pm7250b.dtsi" +#include "pm7325.dtsi" +#include "pm8350c.dtsi" +#include "pmk8350.dtsi" + +/delete-node/ &adsp_mem; +/delete-node/ &cdsp_mem; +/delete-node/ &ipa_fw_mem; +/delete-node/ &mpss_mem; +/delete-node/ &remoteproc_mpss; +/delete-node/ &remoteproc_wpss; +/delete-node/ &rmtfs_mem; +/delete-node/ &video_mem; +/delete-node/ &wifi; +/delete-node/ &wlan_ce_mem; +/delete-node/ &wlan_fw_mem; +/delete-node/ &wpss_mem; +/delete-node/ &xbl_mem; + +/ { + model = "Thundercomm RUBIK Pi 3"; + compatible = "thundercomm,rubikpi3", "qcom,qcm6490"; + + chassis-type = "embedded"; + + aliases { + serial0 = &uart5; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + fan0: pwm-fan { + compatible = "pwm-fan"; + /* cooling level (0, 1, 2, 3) : (0% duty, 25% duty, 50% duty, 100% duty) */ + cooling-levels = <0 64 128 255>; + #cooling-cells = <2>; + pwms = <&pm8350c_pwm 3 1000000>; + pinctrl-0 = <&fan_pwm_out_default>; + pinctrl-names = "default"; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-0 = <&kypd_vol_up_n>; + pinctrl-names = "default"; + + key-volume-up { + label = "Volume Up"; + gpios = <&pm7325_gpios 6 GPIO_ACTIVE_LOW>; + linux,code = ; + linux,can-disable; + }; + }; + + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con: endpoint { + remote-endpoint = <<9611_out>; + }; + }; + }; + + pmic-glink { + compatible = "qcom,qcm6490-pmic-glink", "qcom,pmic-glink"; + + #address-cells = <1>; + #size-cells = <0>; + orientation-gpios = <&tlmm 140 GPIO_ACTIVE_HIGH>; + + connector@0 { + compatible = "usb-c-connector"; + reg = <0>; + power-role = "dual"; + data-role = "dual"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + pmic_glink_hs_in: endpoint { + remote-endpoint = <&usb_1_dwc3_hs>; + }; + }; + + port@1 { + reg = <1>; + + pmic_glink_ss_in: endpoint { + remote-endpoint = <&usb_dp_qmpphy_out>; + }; + }; + + port@2 { + reg = <2>; + + pmic_glink_sbu_in: endpoint { + remote-endpoint = <&usb1_sbu_mux>; + }; + }; + }; + }; + }; + + reserved-memory { + xbl_mem: xbl@80700000 { + reg = <0x0 0x80700000 0x0 0x100000>; + no-map; + }; + + cdsp_secure_heap_mem: cdsp-secure-heap@81800000 { + reg = <0x0 0x81800000 0x0 0x1e00000>; + no-map; + }; + + camera_mem: camera@84300000 { + reg = <0x0 0x84300000 0x0 0x500000>; + no-map; + }; + + adsp_mem: adsp@86100000 { + reg = <0x0 0x86100000 0x0 0x2800000>; + no-map; + }; + + cdsp_mem: cdsp@88900000 { + reg = <0x0 0x88900000 0x0 0x1e00000>; + no-map; + }; + + video_mem: video@8a700000 { + reg = <0x0 0x8a700000 0x0 0x700000>; + no-map; + }; + + cvp_mem: cvp@8ae00000 { + reg = <0x0 0x8ae00000 0x0 0x500000>; + no-map; + }; + + gpu_microcode_mem: gpu-microcode@8b31a000 { + reg = <0x0 0x8b31a000 0x0 0x2000>; + no-map; + }; + + tz_stat_mem: tz-stat@c0000000 { + reg = <0x0 0xc0000000 0x0 0x100000>; + no-map; + }; + + tags_mem: tags@c0100000 { + reg = <0x0 0xc0100000 0x0 0x1200000>; + no-map; + }; + + qtee_mem: qtee@c1300000 { + reg = <0x0 0xc1300000 0x0 0x500000>; + no-map; + }; + + trusted_apps_mem: trusted-apps@c1800000 { + reg = <0x0 0xc1800000 0x0 0x1c00000>; + no-map; + }; + + debug_vm_mem: debug-vm@d0600000 { + reg = <0x0 0xd0600000 0x0 0x100000>; + no-map; + }; + }; + + thermal-zones { + xo-thermal { + thermal-sensors = <&pmk8350_adc_tm 0>; + + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + quiet-thermal { + thermal-sensors = <&pmk8350_adc_tm 1>; + + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + sdm-skin-thermal { + thermal-sensors = <&pmk8350_adc_tm 3>; + + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + }; + + usb1-sbu-mux { + compatible = "pericom,pi3usb102", "gpio-sbu-mux"; + enable-gpios = <&tlmm 53 GPIO_ACTIVE_LOW>; + select-gpios = <&tlmm 52 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&usb1_sbu_default>; + pinctrl-names = "default"; + mode-switch; + orientation-switch; + + port { + usb1_sbu_mux: endpoint { + remote-endpoint = <&pmic_glink_sbu_in>; + }; + }; + }; + + vreg_lt9611_3p3: vreg_lt9611_3p3 { + compatible = "regulator-fixed"; + + regulator-name = "vreg_lt9611_3p3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 83 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <<9611_vcc_pin>; + pinctrl-names = "default"; + }; + + vreg_m2_1p8: vreg_m2_1p8 { + compatible = "regulator-fixed"; + + regulator-name = "vreg_m2_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <50000>; + + gpio = <&tlmm 56 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&m2_vcc_pin>; + pinctrl-names = "default"; + + regulator-always-on; + regulator-boot-on; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + }; + + vreg_sdio_wifi_1p8: vreg_sdio_wifi_1p8 { + compatible = "regulator-fixed"; + + regulator-name = "vreg_sdio_wifi_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <50000>; + + gpio = <&tlmm 125 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&wifi_reset_active>, + <&wifi_host_wake>, + <&wifi_power_on>; + pinctrl-names = "default"; + + regulator-always-on; + }; + + vreg_usbhub_1p8: vreg_usbhub_1p8 { + compatible = "regulator-fixed"; + + regulator-name = "vreg_usbhub_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <50000>; + + gpio = <&tlmm 86 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&usbhub_power>; + pinctrl-names = "default"; + + regulator-always-on; + }; + + vreg_usb_eth_1p8: vreg_usb_eth_1p8 { + compatible = "regulator-fixed"; + + regulator-name = "vreg_usb_eth_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <50000>; + + gpio = <&tlmm 7 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&usb_eth_power>; + pinctrl-names = "default"; + + vin-supply = <&vreg_usbhub_1p8>; + }; + + vreg_usbhub_rest: vreg_usbhub_rest { + compatible = "regulator-fixed"; + + regulator-name = "vreg_usbhub_rest"; + regulator-min-microvolt = <1800000>; + regulator-enable-ramp-delay = <50000>; + regulator-max-microvolt = <1800000>; + + gpio = <&tlmm 136 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&usbhub_rest>; + pinctrl-names = "default"; + + vin-supply = <&vreg_usb_eth_1p8>; + + regulator-always-on; + regulator-boot-on; + }; +}; + +&apps_rsc { + regulators-0 { + compatible = "qcom,pm7325-rpmh-regulators"; + qcom,pmic-id = "b"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-l1-l4-l12-l15-supply = <&vreg_s7b_0p972>; + vdd-l2-l7-supply = <&vreg_bob_3p296>; + vdd-l3-supply = <&vreg_s2b_0p876>; + vdd-l5-supply = <&vreg_s2b_0p876>; + vdd-l6-l9-l10-supply = <&vreg_s8b_1p272>; + vdd-l8-supply = <&vreg_s7b_0p972>; + vdd-l11-l17-l18-l19-supply = <&vreg_s1b_1p872>; + vdd-l13-supply = <&vreg_s7b_0p972>; + vdd-l14-l16-supply = <&vreg_s8b_1p272>; + + vreg_s1b_1p872: smps1 { + regulator-name = "vreg_s1b_1p872"; + regulator-min-microvolt = <1840000>; + regulator-max-microvolt = <2040000>; + }; + + vreg_s2b_0p876: smps2 { + regulator-name = "vreg_s2b_0p876"; + regulator-min-microvolt = <570070>; + regulator-max-microvolt = <1050000>; + }; + + vreg_s7b_0p972: smps7 { + regulator-name = "vreg_s7b_0p972"; + regulator-min-microvolt = <535000>; + regulator-max-microvolt = <1120000>; + }; + + vreg_s8b_1p272: smps8 { + regulator-name = "vreg_s8b_1p272"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1500000>; + regulator-initial-mode = ; + }; + + vreg_l1b_0p912: ldo1 { + regulator-name = "vreg_l1b_0p912"; + regulator-min-microvolt = <825000>; + regulator-max-microvolt = <925000>; + regulator-initial-mode = ; + }; + + vreg_l2b_3p072: ldo2 { + regulator-name = "vreg_l2b_3p072"; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = ; + }; + + vreg_l3b_0p504: ldo3 { + regulator-name = "vreg_l3b_0p504"; + regulator-min-microvolt = <312000>; + regulator-max-microvolt = <910000>; + regulator-initial-mode = ; + }; + + vreg_l4b_0p752: ldo4 { + regulator-name = "vreg_l4b_0p752"; + regulator-min-microvolt = <752000>; + regulator-max-microvolt = <820000>; + regulator-initial-mode = ; + }; + + reg_l5b_0p752: ldo5 { + regulator-name = "reg_l5b_0p752"; + regulator-min-microvolt = <552000>; + regulator-max-microvolt = <832000>; + regulator-initial-mode = ; + }; + + vreg_l6b_1p2: ldo6 { + regulator-name = "vreg_l6b_1p2"; + regulator-min-microvolt = <1140000>; + regulator-max-microvolt = <1260000>; + regulator-initial-mode = ; + }; + + vreg_l7b_2p952: ldo7 { + regulator-name = "vreg_l7b_2p952"; + regulator-min-microvolt = <2952000>; + regulator-max-microvolt = <2952000>; + regulator-initial-mode = ; + }; + + vreg_l8b_0p904: ldo8 { + regulator-name = "vreg_l8b_0p904"; + regulator-min-microvolt = <870000>; + regulator-max-microvolt = <970000>; + regulator-initial-mode = ; + }; + + vreg_l9b_1p2: ldo9 { + regulator-name = "vreg_l9b_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = ; + }; + + vreg_l11b_1p504: ldo11 { + regulator-name = "vreg_l11b_1p504"; + regulator-min-microvolt = <1504000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = ; + }; + + vreg_l12b_0p751: ldo12 { + regulator-name = "vreg_l12b_0p751"; + regulator-min-microvolt = <751000>; + regulator-max-microvolt = <824000>; + regulator-initial-mode = ; + }; + + vreg_l13b_0p53: ldo13 { + regulator-name = "vreg_l13b_0p53"; + regulator-min-microvolt = <530000>; + regulator-max-microvolt = <824000>; + regulator-initial-mode = ; + }; + + vreg_l14b_1p08: ldo14 { + regulator-name = "vreg_l14b_1p08"; + regulator-min-microvolt = <1080000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = ; + }; + + vreg_l15b_0p765: ldo15 { + regulator-name = "vreg_l15b_0p765"; + regulator-min-microvolt = <765000>; + regulator-max-microvolt = <1020000>; + regulator-initial-mode = ; + }; + + vreg_l16b_1p1: ldo16 { + regulator-name = "vreg_l16b_1p1"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1300000>; + regulator-initial-mode = ; + }; + + vreg_l17b_1p7: ldo17 { + regulator-name = "vreg_l17b_1p7"; + regulator-min-microvolt = <1700000>; + regulator-max-microvolt = <1900000>; + regulator-initial-mode = ; + }; + + vreg_l18b_1p8: ldo18 { + regulator-name = "vreg_l18b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = ; + }; + + vreg_l19b_1p8: ldo19 { + regulator-name = "vreg_l19b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = ; + }; + }; + + regulators-1 { + compatible = "qcom,pm8350c-rpmh-regulators"; + qcom,pmic-id = "c"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-s9-supply = <&vph_pwr>; + vdd-s10-supply = <&vph_pwr>; + vdd-l1-l12-supply = <&vreg_s1b_1p872>; + vdd-l2-l8-supply = <&vreg_s1b_1p872>; + vdd-l3-l4-l5-l7-l13-supply = <&vreg_bob_3p296>; + vdd-l6-l9-l11-supply = <&vreg_bob_3p296>; + vdd-l10-supply = <&vreg_s7b_0p972>; + vdd-bob-supply = <&vph_pwr>; + + vreg_s1c_2p19: smps1 { + regulator-name = "vreg_s1c_2p19"; + regulator-min-microvolt = <2190000>; + regulator-max-microvolt = <2210000>; + }; + + vreg_s2c_0p752: smps2 { + regulator-name = "vreg_s2c_0p752"; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <800000>; + }; + + vreg_s5c_0p752: smps5 { + regulator-name = "vreg_s5c_0p752"; + regulator-min-microvolt = <465000>; + regulator-max-microvolt = <1050000>; + }; + + vreg_s7c_0p752: smps7 { + regulator-name = "vreg_s7c_0p752"; + regulator-min-microvolt = <465000>; + regulator-max-microvolt = <800000>; + }; + + vreg_s9c_1p084: smps9 { + regulator-name = "vreg_s9c_1p084"; + regulator-min-microvolt = <1010000>; + regulator-max-microvolt = <1170000>; + }; + + vreg_l1c_1p8: ldo1 { + regulator-name = "vreg_l1c_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1980000>; + regulator-initial-mode = ; + }; + + vreg_l2c_1p62: ldo2 { + regulator-name = "vreg_l2c_1p62"; + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <1980000>; + regulator-initial-mode = ; + }; + + vreg_l3c_2p8: ldo3 { + regulator-name = "vreg_l3c_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3540000>; + regulator-initial-mode = ; + }; + + vreg_l4c_1p62: ldo4 { + regulator-name = "vreg_l4c_1p62"; + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <3300000>; + regulator-initial-mode = ; + }; + + vreg_l5c_1p62: ldo5 { + regulator-name = "vreg_l5c_1p62"; + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <3300000>; + regulator-initial-mode = ; + }; + + vreg_l6c_2p96: ldo6 { + regulator-name = "vreg_l6c_2p96"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_l7c_3p0: ldo7 { + regulator-name = "vreg_l7c_3p0"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = ; + }; + + vreg_l8c_1p62: ldo8 { + regulator-name = "vreg_l8c_1p62"; + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = ; + }; + + vreg_l9c_2p96: ldo9 { + regulator-name = "vreg_l9c_2p96"; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = ; + }; + + vreg_l10c_0p88: ldo10 { + regulator-name = "vreg_l10c_0p88"; + regulator-min-microvolt = <720000>; + regulator-max-microvolt = <1050000>; + regulator-initial-mode = ; + }; + + vreg_l11c_2p8: ldo11 { + regulator-name = "vreg_l11c_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = ; + }; + + vreg_l12c_1p65: ldo12 { + regulator-name = "vreg_l12c_1p65"; + regulator-min-microvolt = <1650000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = ; + }; + + vreg_l13c_2p7: ldo13 { + regulator-name = "vreg_l13c_2p7"; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = ; + }; + + vreg_bob_3p296: bob { + regulator-name = "vreg_bob_3p296"; + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3960000>; + }; + }; +}; + +&gcc { + protected-clocks = , + , + , + , + , + , + , + , + , + , + , + , + , + ; +}; + +&gpi_dma0 { + status = "okay"; +}; + +&gpi_dma1 { + status = "okay"; +}; + +&gpu { + status = "okay"; +}; + +&gpu_zap_shader { + firmware-name = "qcom/qcs6490/a660_zap.mbn"; +}; + +/* Pin 3, 5 in 40-pin connector */ +&i2c1 { + status = "okay"; +}; + +&i2c9 { + clock-frequency = <400000>; + + status = "okay"; + + lt9611_codec: hdmi-bridge@39 { + compatible = "lontium,lt9611"; + reg = <0x39>; + + interrupts-extended = <&tlmm 20 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&tlmm 21 GPIO_ACTIVE_HIGH>; + + vdd-supply = <&vreg_lt9611_3p3>; + vcc-supply = <&vreg_lt9611_3p3>; + + pinctrl-0 = <<9611_irq_pin>, + <<9611_rst_pin>; + pinctrl-names = "default"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + lt9611_a: endpoint { + remote-endpoint = <&mdss_dsi0_out>; + }; + }; + + port@2 { + reg = <2>; + + lt9611_out: endpoint { + remote-endpoint = <&hdmi_con>; + }; + }; + }; + }; +}; + +&lpass_audiocc { + compatible = "qcom,qcm6490-lpassaudiocc"; + /delete-property/ power-domains; +}; + +&mdss { + status = "okay"; +}; + +&mdss_dp { + status = "okay"; +}; + +&mdss_dp_out { + data-lanes = <0 1>; + link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>; + + remote-endpoint = <&usb_dp_qmpphy_dp_in>; +}; + +&mdss_dsi { + vdda-supply = <&vreg_l6b_1p2>; + + status = "okay"; +}; + +&mdss_dsi0_out { + remote-endpoint = <<9611_a>; + data-lanes = <0 1 2 3>; +}; + +&mdss_dsi_phy { + vdds-supply = <&vreg_l10c_0p88>; + + status = "okay"; +}; + +&pcie0 { + status = "okay"; +}; + +&pcie0_phy { + vdda-phy-supply = <&vreg_l10c_0p88>; + vdda-pll-supply = <&vreg_l6b_1p2>; + + status = "okay"; +}; + +&pcie1 { + perst-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 3 GPIO_ACTIVE_LOW>; + + pinctrl-0 = <&pcie1_reset_n>, + <&pcie1_wake_n>, + <&pcie1_clkreq_n>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&pcie1_phy { + vdda-phy-supply = <&vreg_l10c_0p88>; + vdda-pll-supply = <&vreg_l6b_1p2>; + + status = "okay"; +}; + +&pm7325_gpios { + kypd_vol_up_n: kypd-vol-up-n-state { + pins = "gpio6"; + function = PMIC_GPIO_FUNC_NORMAL; + power-source = <1>; + bias-pull-up; + input-enable; + }; +}; + +&pm7325_temp_alarm { + io-channels = <&pmk8350_vadc PM7325_ADC7_DIE_TEMP>; + io-channel-names = "thermal"; +}; + +&pmk8350_adc_tm { + status = "okay"; + + xo-therm@0 { + reg = <0>; + io-channels = <&pmk8350_vadc PMK8350_ADC7_AMUX_THM1_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; + + quiet-therm@1 { + reg = <1>; + io-channels = <&pmk8350_vadc PM7325_ADC7_AMUX_THM1_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; + + sdm-skin-therm@3 { + reg = <3>; + io-channels = <&pmk8350_vadc PM7325_ADC7_AMUX_THM3_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; +}; + +&pm8350c_pwm { + #address-cells = <1>; + #size-cells = <0>; + + status = "okay"; + + led@1 { + reg = <1>; + color = ; + function = LED_FUNCTION_INDICATOR; + function-enumerator = <3>; + linux,default-trigger = "none"; + default-state = "off"; + panic-indicator; + label = "red"; + }; + + led@2 { + reg = <2>; + color = ; + function = LED_FUNCTION_INDICATOR; + function-enumerator = <2>; + linux,default-trigger = "none"; + default-state = "off"; + label = "green"; + }; + + led@3 { + reg = <3>; + color = ; + function = LED_FUNCTION_INDICATOR; + function-enumerator = <1>; + linux,default-trigger = "none"; + default-state = "off"; + label = "blue"; + }; +}; + +&pmk8350_rtc { + allow-set-time; + + status = "okay"; +}; + +&pmk8350_vadc { + channel@3 { + reg = ; + label = "pmk8350_die_temp"; + qcom,pre-scaling = <1 1>; + }; + + channel@44 { + reg = ; + label = "xo_therm"; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + qcom,ratiometric; + }; + + channel@103 { + reg = ; + label = "pm7325_die_temp"; + qcom,pre-scaling = <1 1>; + }; + + channel@144 { + reg = ; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + label = "pm7325_quiet_therm"; + }; + + channel@146 { + reg = ; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + label = "pm7325_sdm_skin_therm"; + }; +}; + +&pon_pwrkey { + status = "okay"; +}; + +&pon_resin { + linux,code = ; + + status = "okay"; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&remoteproc_adsp { + firmware-name = "qcom/qcs6490/adsp.mbn"; + + status = "okay"; +}; + +&remoteproc_cdsp { + firmware-name = "qcom/qcs6490/cdsp.mbn"; + + status = "okay"; +}; + +/* WIFI part of the AP6256 connected with SDIO */ +&sdhc_2 { + vmmc-supply = <&vreg_l9c_2p96>; + vqmmc-supply = <&vreg_l6c_2p96>; + + non-removable; + keep-power-in-suspend; + /delete-property/ cd-gpios; + + status = "okay"; +}; + +/* Pin 19, 21, 23, 24 in 40-pin connector */ +&spi12 { + status = "okay"; +}; + +/* Pin 8, 10 in 40-pin connector */ +&uart2 { + status = "okay"; +}; + +&uart5 { + status = "okay"; +}; + +/* BT part of the AP6256 connected with UART */ +&uart7 { + /delete-property/ interrupts; + interrupts-extended = <&intc GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>, + <&tlmm 31 IRQ_TYPE_EDGE_FALLING>; + pinctrl-1 = <&qup_uart7_sleep_cts>, + <&qup_uart7_sleep_rts>, + <&qup_uart7_sleep_tx>, + <&qup_uart7_sleep_rx>; + pinctrl-names = "default", + "sleep"; + + status = "okay"; + + bluetooth { + compatible = "brcm,bcm4345c5"; + clocks = <&sleep_clk>; + clock-names = "lpo"; + device-wakeup-gpios = <&tlmm 39 GPIO_ACTIVE_HIGH>; + host-wakeup-gpios = <&tlmm 137 GPIO_ACTIVE_HIGH>; + shutdown-gpios = <&tlmm 17 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&bt_device_wake>, + <&bt_host_wake>, + <&bt_reset>; + pinctrl-names = "default"; + vbat-supply = <&vreg_sdio_wifi_1p8>; + vddio-supply = <&vreg_sdio_wifi_1p8>; + max-speed = <3000000>; + }; +}; + +&usb_1 { + dr_mode = "otg"; + + status = "okay"; +}; + +&usb_1_dwc3_hs { + remote-endpoint = <&pmic_glink_hs_in>; +}; + +&usb_1_hsphy { + vdda-pll-supply = <&vreg_l10c_0p88>; + vdda33-supply = <&vreg_l2b_3p072>; + vdda18-supply = <&vreg_l1c_1p8>; + + status = "okay"; +}; + +&usb_1_qmpphy { + vdda-phy-supply = <&vreg_l6b_1p2>; + vdda-pll-supply = <&vreg_l1b_0p912>; + + status = "okay"; +}; + +&usb_2 { + dr_mode = "host"; + + status = "okay"; +}; + +&usb_2_hsphy { + vdda-pll-supply = <&vreg_l10c_0p88>; + vdda18-supply = <&vreg_l1c_1p8>; + vdda33-supply = <&vreg_l2b_3p072>; + + status = "okay"; +}; + +&usb_dp_qmpphy_out { + remote-endpoint = <&pmic_glink_ss_in>; +}; + +&ufs_mem_hc { + reset-gpios = <&tlmm 175 GPIO_ACTIVE_LOW>; + vcc-supply = <&vreg_l7b_2p952>; + vcc-max-microamp = <800000>; + vccq-supply = <&vreg_l9b_1p2>; + vccq-max-microamp = <900000>; + vccq2-supply = <&vreg_l9b_1p2>; + vccq2-max-microamp = <900000>; + + status = "okay"; +}; + +&ufs_mem_phy { + vdda-phy-supply = <&vreg_l10c_0p88>; + vdda-pll-supply = <&vreg_l6b_1p2>; + + status = "okay"; +}; + +&venus { + status = "okay"; +}; + +&thermal_zones { + cpu0-thermal { + trips { + cpu_tepid: cpu-tepid { + temperature = <65000>; + hysteresis = <5000>; + type = "active"; + }; + + cpu_warm: cpu-warm { + temperature = <80000>; + hysteresis = <5000>; + type = "active"; + }; + + cpu_hot: cpu-hot { + temperature = <90000>; + hysteresis = <5000>; + type = "active"; + }; + }; + + cooling-maps { + map-cpu-tepid { + /* active: set fan to cooling level 1 */ + cooling-device = <&fan0 1 1>; + trip = <&cpu_tepid>; + }; + + map-cpu-warm { + /* active: set fan to cooling level 2 */ + cooling-device = <&fan0 2 2>; + trip = <&cpu_warm>; + }; + + map-cpu-hot { + /* active: set fan to cooling level 3 */ + cooling-device = <&fan0 3 3>; + trip = <&cpu_hot>; + }; + }; + }; +}; + +/* PINCTRL - ADDITIONS TO NODES IN PARENT DEVICE TREE FILES */ + +&pm8350c_gpios { + fan_pwm_out_default: fan-pwm-out-default-state { + pins = "gpio8"; + function = "func1"; + power-source = <1>; + drive-push-pull; + output-high; + qcom,drive-strength = ; + }; +}; + +&sdc2_clk { + bias-disable; + drive-strength = <16>; +}; + +&sdc2_cmd { + bias-pull-up; + drive-strength = <10>; +}; + +&sdc2_data { + bias-pull-up; + drive-strength = <10>; +}; + +&tlmm { + pcie1_reset_n: pcie1-reset-n-state { + pins = "gpio2"; + function = "gpio"; + drive-strength = <16>; + output-low; + bias-disable; + }; + + pcie1_wake_n: pcie1-wake-n-state { + pins = "gpio3"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + usb_eth_power: usb-eth-power-state { + pins = "gpio7"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; + + wifi_reset_active: wifi-reset-active-state { + pins = "gpio16"; + function = "gpio"; + drive-strength = <2>; + output-high; + bias-disable; + }; + + bt_reset: bt-reset-state { + pins = "gpio17"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + lt9611_irq_pin: lt9611-irq-state { + pins = "gpio20"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + lt9611_rst_pin: lt9611-rst-state { + pins = "gpio21"; + function = "gpio"; + output-high; + input-disable; + }; + + qup_uart7_sleep_cts: qup-uart7-sleep-cts-state { + pins = "gpio28"; + function = "gpio"; + /* + * Configure a bias-bus-hold on CTS to lower power + * usage when Bluetooth is turned off. Bus hold will + * maintain a low power state regardless of whether + * the Bluetooth module drives the pin in either + * direction or leaves the pin fully unpowered. + */ + bias-bus-hold; + }; + + qup_uart7_sleep_rts: qup-uart7-sleep-rts-state { + pins = "gpio29"; + function = "gpio"; + /* + * Configure pull-down on RTS. As RTS is active low + * signal, pull it low to indicate the BT SoC that it + * can wakeup the system anytime from suspend state by + * pulling RX low (by sending wakeup bytes). + */ + bias-pull-down; + }; + + qup_uart7_sleep_tx: qup-uart7-sleep-tx-state { + pins = "gpio30"; + function = "gpio"; + /* + * Configure pull-up on TX when it isn't actively driven + * to prevent BT SoC from receiving garbage during sleep. + */ + bias-pull-up; + }; + + qup_uart7_sleep_rx: qup-uart7-sleep-rx-state { + pins = "gpio31"; + function = "gpio"; + /* + * Configure a pull-up on RX. This is needed to avoid + * garbage data when the TX pin of the Bluetooth module + * is floating which may cause spurious wakeups. + */ + bias-pull-up; + }; + + wifi_host_wake: wifi-host-wake-state { + pins = "gpio38"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + bt_device_wake: bt-device-wake-state { + pins = "gpio39"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + usb1_sbu_default: usb1-sbu-state { + sel-pins { + pins = "gpio52"; + function = "gpio"; + bias-disable; + drive-strength = <16>; + }; + + oe-n-pins { + pins = "gpio53"; + function = "gpio"; + bias-disable; + drive-strength = <16>; + output-high; + }; + }; + + m2_vcc_pin: m2-vcc-state { + pins = "gpio56"; + function = "gpio"; + output-high; + input-disable; + }; + + lt9611_vcc_pin: lt9611-vcc-pin-state { + pins = "gpio83"; + function = "gpio"; + output-high; + input-disable; + }; + + usbhub_power: usbhub-power-state { + pins = "gpio86"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; + + wifi_power_on: wifi-power-on-state { + pins = "gpio125"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + usbhub_rest: usbhub-reset-state { + pins = "gpio136"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; + + bt_host_wake: bt-host-wake-state { + pins = "gpio137"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; +}; + +&qup_uart7_cts { + /* + * Configure a bias-bus-hold on CTS to lower power + * usage when Bluetooth is turned off. Bus hold will + * maintain a low power state regardless of whether + * the Bluetooth module drives the pin in either + * direction or leaves the pin fully unpowered. + */ + bias-bus-hold; +}; + +&qup_uart7_rts { + /* We'll drive RTS, so no pull */ + drive-strength = <2>; + bias-disable; +}; + +&qup_uart7_rx { + /* + * Configure a pull-up on RX. This is needed to avoid + * garbage data when the TX pin of the Bluetooth module is + * in tri-state (module powered off or not driving the + * signal yet). + */ + bias-pull-up; +}; + +&qup_uart7_tx { + /* We'll drive TX, so no pull */ + drive-strength = <2>; + bias-disable; +}; -- 2.43.0