From mboxrd@z Thu Jan 1 00:00:00 1970 Received: from mail-wr1-f45.google.com (mail-wr1-f45.google.com [209.85.221.45]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id AB03C288C30 for ; Thu, 6 Nov 2025 15:31:30 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=209.85.221.45 ARC-Seal:i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1762443094; cv=none; b=fGD3BxNQrOFxHBdQkDAaXDO0DAXBPLPIeSkEP1nvVDKWPhLna46Cd3NIH4Xy6O0gV8PZIznkbO0Ng8eFxFHKn9qB2QXmt0YDFa8/3bE9WWlmGFE3wdKoqyT2xhIV6cHz5jJwq2ImoODWejxjbXDJSbxwX2Pcji9InAmWG49OtPg= ARC-Message-Signature:i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1762443094; c=relaxed/simple; bh=5B4Xn6KMT6bnOoj0Luy4yJVa/EzHk5+WSMQt3P7uD9k=; h=From:To:Cc:Subject:Date:Message-ID:In-Reply-To:References: MIME-Version:Content-Type; b=fE3PtujzDkvGaVNpEujbDL9+iQfCXEx9hYiV+Isil4HXtDJU+rQ1UhOSCsLtD+GUst4BLMSZXK0hBTNDqf9fKxK0uTr6KYqp1rhC8xhSztbBbhAQcc5d8aLaVaQIA7fTv3yOwed4zV2InXePjSC6X8Bb93Y/unoH12nK5UlC25A= ARC-Authentication-Results:i=1; smtp.subspace.kernel.org; dmarc=pass (p=quarantine dis=none) header.from=arduino.cc; spf=pass smtp.mailfrom=arduino.cc; dkim=pass (1024-bit key) header.d=arduino.cc header.i=@arduino.cc header.b=ImI6Ojoi; arc=none smtp.client-ip=209.85.221.45 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=quarantine dis=none) header.from=arduino.cc Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=arduino.cc Authentication-Results: smtp.subspace.kernel.org; dkim=pass (1024-bit key) header.d=arduino.cc header.i=@arduino.cc header.b="ImI6Ojoi" Received: by mail-wr1-f45.google.com with SMTP id ffacd0b85a97d-429b7eecf7cso800336f8f.0 for ; Thu, 06 Nov 2025 07:31:30 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=arduino.cc; s=google; t=1762443088; x=1763047888; darn=vger.kernel.org; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:from:to:cc:subject:date :message-id:reply-to; bh=ey5X+0gIhe5Z/c55scS15gTtf6rdR80+WTGhiV8lPvw=; b=ImI6OjoinurSa7SSRGZt5++zOnM8B8emgxFr4IfiNHWDjCxRoYIkyVReapxAV/E92l dxjJkgQ790SLyri9Y9LVWYWFlUtVlq+GYgD5n435os84LMMVxkdQhzfI/rYdwTA+hv0p l8umQZh1DIQDM+OaLUjOyA/ShGR+D5Qgnu6Ug= X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20230601; t=1762443088; x=1763047888; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=ey5X+0gIhe5Z/c55scS15gTtf6rdR80+WTGhiV8lPvw=; b=IRdfj+KEyCzAbNFGJP+IUBYF+t4et+vjkMCsjRssj75vqbB1OiUt7xRIdh50SCJh/R bTdJcmhcR8jR458hWwb8+/cUdN92PAf88ah6nIPqZduk2HvUNMQ2RwnipJmh6zve4sYs cdWMPPoYUJuNWOvb/tQZg/ez9vyZXl5LKIMZ+4Us0OTNUpBzD5HlrCxMCeuXWjjbXeZk SblSCFgr2wsAumPa9XkPcdK/U3yojF8qgBp4FID0Ds+/FE9eF26y5IZjbV4FmnYshDnS Uqwsrld1ReyjkP6qc1DFtOgCIZ6TLtIFNPlBMz/PymiRQjILY7jCh+Am/rVApKcylsTg 0Iqg== X-Forwarded-Encrypted: i=1; AJvYcCXJr6l2ZAn7+7xhbttUqK1w+SOAGlNSA2UP02IcmoXOj/kXIbu2gcM7KVYvHFPYfz3ozEz2Br0CnMx2xN6s@vger.kernel.org X-Gm-Message-State: AOJu0YzVIAWxr0r2bXdr8TBULtpd8XsIZXsKfasHLE/KHsK5h1OVzd4w 4ghciCI+PvWcpggqGw0KSYErusq074MhFNEqdz4Eivr0atfHAZcbeXzzMiilLYbENTQ= X-Gm-Gg: ASbGncvq5iBH8aKIGB3bfvP0WT7fSbyjizoKFI+aqNiymMi3epoLzEiaGlS4LVhShdQ 1voIkp0bjbMbRrYYpLGaSfWp9w0ziKSPzcv9ZQ32W5xfjipzSJWZOcUD2jRv+IQUb0BvAB5p5qs PvT1dJALQHT7T6ItffUliyHgsrG9UB5KQpVHLJgpvX68YmwmBbBFEkPvsYIMyBWkiR4p7/zp7r4 mDPppRnyTicyJ6Cd6Mm1bvrzB7GHubeftqZDtbzVN+PUIhsVe60UyptPPYblyuhgCv4jEwwBeZZ wC0fTiK2lFcuS6gI41T1M6/pW8To8DRmceMJhHGOuTe10ZAEo6nHdtcKekyVAXmByEFfAYG2r/i U5hFSOsd3PZD3ZWsi6uUf8eZFRFkP6d2SqL9uniIJb0OJQ/oaXntV/L2C7sNNfwEWzLHohyl47W VqEBNU5AqvIXk8sUpQAItsgp2VTbUz7H7PmCM= X-Google-Smtp-Source: AGHT+IFDtaikcG7OtQDnbnolkjzqwvJpTJE8dT4I0+3TeQn2A4bXFRy6GwuqhOuS6LckO5djP+ZKOw== X-Received: by 2002:a05:6000:430e:b0:429:e99a:5891 with SMTP id ffacd0b85a97d-429eb17328bmr3369739f8f.18.1762443088362; Thu, 06 Nov 2025 07:31:28 -0800 (PST) Received: from riccardo-work (public.toolboxoffice.it. [213.215.163.27]) by smtp.gmail.com with ESMTPSA id ffacd0b85a97d-429eb49a079sm5966719f8f.32.2025.11.06.07.31.27 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Thu, 06 Nov 2025 07:31:27 -0800 (PST) From: Riccardo Mereu X-Google-Original-From: Riccardo Mereu To: andersson@kernel.org, konradybcio@kernel.org, robh@kernel.org, krzk+dt@kernel.org, conor+dt@kernel.org, broonie@kernel.org Cc: linux@roeck-us.net, Jonathan.Cameron@huawei.com, wenswang@yeah.net, naresh.solanki@9elements.com, michal.simek@amd.com, nuno.sa@analog.com, chou.cosmo@gmail.com, grantpeltier93@gmail.com, eajames@linux.ibm.com, farouk.bouabid@cherry.de, linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-spi@vger.kernel.org, mm.facchin@arduino.cc, Riccardo Mereu , Riccardo Mereu Subject: [PATCH 5/5] arm64: dts: qcom: unoq: add dts for arduino unoq Date: Thu, 6 Nov 2025 16:31:19 +0100 Message-ID: <20251106153119.266840-6-r.mereu@arduino.cc> X-Mailer: git-send-email 2.51.2 In-Reply-To: <20251106153119.266840-1-r.mereu@arduino.cc> References: <20251106153119.266840-1-r.mereu@arduino.cc> Precedence: bulk X-Mailing-List: linux-arm-msm@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit From: Riccardo Mereu Arduino UnoQ is a single-board computer combining Qualcomm Dragonwing™ QRB2210 microprocessor with STMicroelectronics STM32U585 microcontroller. Support to a simply boot to shell environment includes: - UART, I2C, SPI - onboard LEDS - eMMC - WLAN and BT Signed-off-by: Riccardo Mereu --- arch/arm64/boot/dts/qcom/Makefile | 1 + .../boot/dts/qcom/qrb2210-arduino-imola.dts | 456 ++++++++++++++++++ 2 files changed, 457 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/qrb2210-arduino-imola.dts diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index 6f34d5ed331c..9f98a7f2cbb4 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -143,6 +143,7 @@ dtb-$(CONFIG_ARCH_QCOM) += qcs8550-aim300-aiot.dtb dtb-$(CONFIG_ARCH_QCOM) += qcs9100-ride.dtb dtb-$(CONFIG_ARCH_QCOM) += qcs9100-ride-r3.dtb dtb-$(CONFIG_ARCH_QCOM) += qdu1000-idp.dtb +dtb-$(CONFIG_ARCH_QCOM) += qrb2210-arduino-imola.dtb dtb-$(CONFIG_ARCH_QCOM) += qrb2210-rb1.dtb dtb-$(CONFIG_ARCH_QCOM) += qrb4210-rb2.dtb dtb-$(CONFIG_ARCH_QCOM) += qrb5165-rb5.dtb diff --git a/arch/arm64/boot/dts/qcom/qrb2210-arduino-imola.dts b/arch/arm64/boot/dts/qcom/qrb2210-arduino-imola.dts new file mode 100644 index 000000000000..83e7f3e9da76 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/qrb2210-arduino-imola.dts @@ -0,0 +1,456 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (c) 2025, Arduino SA + */ + +/dts-v1/; + +#include +#include "agatti.dtsi" +#include "pm4125.dtsi" + +/delete-node/ &cont_splash_memory; + +/ { + model = "Arduino UnoQ"; + compatible = "arduino,imola", "qcom,qrb2210", "qcom,qcm2290"; + + aliases { + serial0 = &uart4; + serial1 = &uart2; + serial2 = &uart3; + sdhc1 = &sdhc_1; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + gpio-keys { + compatible = "gpio-keys"; + label = "gpio-keys"; + + pinctrl-0 = <&key_volp_n>, <&key_vold_n>; + pinctrl-names = "default"; + + key-volume-up { + label = "Volume Up"; + linux,code = ; + gpios = <&tlmm 96 GPIO_ACTIVE_LOW>; + debounce-interval = <15>; + linux,can-disable; + wakeup-source; + }; + + key-volume-down { + label = "Volume Down"; + linux,code = ; + gpios = <&tlmm 36 GPIO_ACTIVE_LOW>; + debounce-interval = <15>; + linux,can-disable; + wakeup-source; + }; + }; + + leds: leds { + compatible = "gpio-leds"; + + ledpanic: led-panic { + label = "red:panic"; + function = LED_FUNCTION_INDICATOR; + color = ; + gpios = <&tlmm 39 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "none"; + default-state = "off"; + panic-indicator; + }; + + ledwlan: led-wlan { + label = "green:wlan"; + function = LED_FUNCTION_WLAN; + color = ; + gpios = <&tlmm 40 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "phy0tx"; + default-state = "off"; + }; + + ledbt: led-bt { + label = "blue:bt"; + function = LED_FUNCTION_BLUETOOTH; + color = ; + gpios = <&tlmm 47 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "bluetooth-power"; + default-state = "off"; + }; + + ledr: led-user-red { + gpios = <&tlmm 41 GPIO_ACTIVE_HIGH>; + color = ; + }; + + ledg: led-user-green { + gpios = <&tlmm 42 GPIO_ACTIVE_HIGH>; + color = ; + }; + + ledb: led-user-blue { + gpios = <&tlmm 60 GPIO_ACTIVE_HIGH>; + color = ; + }; + }; + + multi-led { + compatible = "leds-group-multicolor"; + color = ; + function = LED_FUNCTION_INDICATOR; + leds = <&ledr>, <&ledg>, <&ledb>; + }; + + /* PM4125 charger out, supplied by VBAT */ + vph_pwr: regulator-vph-pwr { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + regulator-always-on; + regulator-boot-on; + }; +}; + +&gpi_dma0 { + status = "okay"; +}; + +&gpu { + status = "okay"; +}; + +&gpu_zap_shader { + firmware-name = "qcom/qcm2290/a702_zap.mbn"; +}; + +&pm4125_vbus { + regulator-min-microamp = <500000>; + regulator-max-microamp = <500000>; + + status = "okay"; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&remoteproc_adsp { + firmware-name = "qcom/qcm2290/adsp.mbn"; + + status = "okay"; +}; + +&remoteproc_mpss { + firmware-name = "qcom/qcm2290/modem.mbn"; + + status = "okay"; +}; + +&rpm_requests { + regulators { + compatible = "qcom,rpm-pm2250-regulators"; + vdd_s3-supply = <&vph_pwr>; + vdd_s4-supply = <&vph_pwr>; + vdd_l1_l2_l3_l5_l6_l7_l8_l9_l10_l11_l12-supply = <&pm4125_s3>; + vdd_l4_l17_l18_l19_l20_l21_l22-supply = <&vph_pwr>; + vdd_l13_l14_l15_l16-supply = <&pm4125_s4>; + + pm4125_s3: s3 { + /* 0.4V-1.6625V -> 1.3V (Power tree requirements) */ + regulator-min-microvolt = <1352000>; + regulator-max-microvolt = <1352000>; + regulator-boot-on; + }; + + pm4125_s4: s4 { + /* 1.2V-2.35V -> 2.05V (Power tree requirements) */ + regulator-min-microvolt = <2072000>; + regulator-max-microvolt = <2072000>; + regulator-boot-on; + }; + + pm4125_l2: l2 { + /* LPDDR4X VDD2 */ + regulator-min-microvolt = <1136000>; + regulator-max-microvolt = <1136000>; + regulator-always-on; + regulator-boot-on; + }; + + pm4125_l3: l3 { + /* LPDDR4X VDDQ */ + regulator-min-microvolt = <616000>; + regulator-max-microvolt = <616000>; + regulator-always-on; + regulator-boot-on; + }; + + pm4125_l4: l4 { + /* max = 3.05V -> max = 2.7 to disable 3V signaling (SDHCI2) */ + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2700000>; + regulator-allow-set-load; + }; + + pm4125_l5: l5 { + /* CSI/DSI */ + regulator-min-microvolt = <1232000>; + regulator-max-microvolt = <1232000>; + regulator-allow-set-load; + regulator-boot-on; + }; + + pm4125_l6: l6 { + /* DRAM PLL */ + regulator-min-microvolt = <928000>; + regulator-max-microvolt = <928000>; + regulator-always-on; + regulator-boot-on; + }; + + pm4125_l7: l7 { + /* Wi-Fi CX */ + regulator-min-microvolt = <664000>; + regulator-max-microvolt = <664000>; + }; + + pm4125_l10: l10 { + /* Wi-Fi RFA */ + regulator-min-microvolt = <1304000>; + regulator-max-microvolt = <1304000>; + }; + + pm4125_l11: l11 { + /* ANX7625 DVDD1P0V/AVDD1P0V */ + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-boot-on; + regulator-always-on; + }; + + pm4125_l12: l12 { + /* USB PHYs */ + regulator-min-microvolt = <928000>; + regulator-max-microvolt = <928000>; + regulator-allow-set-load; + regulator-boot-on; + }; + + pm4125_l13: l13 { + /* USB/QFPROM/PLLs */ + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-allow-set-load; + regulator-boot-on; + }; + + pm4125_l14: l14 { + /* SDHCI1 EMMC VCCQ */ + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-allow-set-load; + /* Broken hardware, never turn it off! */ + regulator-always-on; + }; + + pm4125_l15: l15 { + /* VDDIO */ + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-allow-set-load; + regulator-always-on; + regulator-boot-on; + }; + + pm4125_l20: l20 { + /* SDHCI1 EMMC */ + regulator-min-microvolt = <2400000>; + regulator-max-microvolt = <3600000>; + regulator-allow-set-load; + }; + + pm4125_l21: l21 { + /* USB HS */ + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <3300000>; + regulator-allow-set-load; + regulator-boot-on; + }; + + pm4125_l22: l22 { + /* Wi-Fi VDD */ + regulator-min-microvolt = <3312000>; + regulator-max-microvolt = <3312000>; + }; + }; +}; + +&sdhc_1 { + vmmc-supply = <&pm4125_l20>; + vqmmc-supply = <&pm4125_l14>; + pinctrl-0 = <&sdc1_state_on>; + pinctrl-1 = <&sdc1_state_off>; + pinctrl-names = "default", "sleep"; + mmc-hs400-1_8v; + mmc-hs200-1_8v; + non-removable; + supports-cqe; + no-sdio; + no-sd; + + status = "okay"; +}; + +&tlmm { + spidev_cs: spidev-cs-state { + pins = "gpio17"; + function = "gpio"; + drive-strength = <16>; + }; + + jmisc_gpio18: jmisc-gpio18-state { + pins = "gpio18"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + jmisc_gpio28: jmisc-gpio28-state { + pins = "gpio28"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + key_vold_n: key-vold-n-state { + pins = "gpio36"; + function = "gpio"; + bias-pull-up; + output-disable; + }; + + key_volp_n: key-volp-n-state { + pins = "gpio96"; + function = "gpio"; + bias-pull-up; + output-disable; + }; + + jmisc_gpio98: jmisc-gpio98-state { + pins = "gpio98"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + jmisc_gpio99: jmisc-gpio99-state { + pins = "gpio99"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + jmisc_gpio100: jmisc-gpio100-state { + pins = "gpio100"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + jmisc_gpio101: jmisc-gpio101-state { + pins = "gpio101"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; +}; + +&i2c0 { + clock-frequency = <100000>; + + status = "okay"; +}; + +&i2c1 { + clock-frequency = <100000>; + + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +/* UART connected to Bluetooth */ +&uart3 { + status = "okay"; + + bluetooth { + compatible = "qcom,wcn3988-bt"; + + vddio-supply = <&pm4125_l15>; + vddxo-supply = <&pm4125_l13>; + vddrf-supply = <&pm4125_l10>; + vddch0-supply = <&pm4125_l22>; + enable-gpios = <&tlmm 87 GPIO_ACTIVE_HIGH>; + max-speed = <3000000>; + }; +}; + +/* UART connected to JCTL */ +&uart4 { + compatible = "qcom,geni-debug-uart"; + + status = "okay"; +}; + +&spi5 { + status = "okay"; + + spidev@0 { + reg = <0>; + compatible = "arduino,mcu"; + pinctrl-0 = <&spidev_cs>; + pinctrl-names = "default"; + }; +}; + +&usb { + status = "okay"; +}; + +&usb_hsphy { + vdd-supply = <&pm4125_l12>; + vdda-pll-supply = <&pm4125_l13>; + vdda-phy-dpdm-supply = <&pm4125_l21>; + + status = "okay"; +}; + +&usb_qmpphy { + vdda-phy-supply = <&pm4125_l12>; + vdda-pll-supply = <&pm4125_l13>; + + status = "okay"; +}; + +&wifi { + vdd-0.8-cx-mx-supply = <&pm4125_l7>; + vdd-1.8-xo-supply = <&pm4125_l13>; + vdd-1.3-rfa-supply = <&pm4125_l10>; + vdd-3.3-ch0-supply = <&pm4125_l22>; + qcom,ath10k-calibration-variant = "Arduino_UnoQ"; + firmware-name = "qcm2290"; + + status = "okay"; +}; + +&xo_board { + clock-frequency = <38400000>; +}; -- 2.51.2