From: Alexandru Gagniuc <mr.nuke.me@gmail.com>
To: robh@kernel.org, krzk+dt@kernel.org, conor+dt@kernel.org,
devicetree@vger.kernel.org,
Bjorn Andersson <andersson@kernel.org>,
Mathieu Poirier <mathieu.poirier@linaro.org>,
Placeholder Maintainer <placeholder@kernel.org>
Cc: konradybcio@kernel.org, linux-arm-msm@vger.kernel.org,
linux-remoteproc@vger.kernel.org, linux-kernel@vger.kernel.org,
Alexandru Gagniuc <mr.nuke.me@gmail.com>
Subject: [PATCH RFC 2/3] dt-bindings: remoteproc: qcom: add IPQ9574 image loader
Date: Tue, 9 Dec 2025 18:37:24 -0600 [thread overview]
Message-ID: <20251210003729.3909663-3-mr.nuke.me@gmail.com> (raw)
In-Reply-To: <20251210003729.3909663-1-mr.nuke.me@gmail.com>
Document the IPQ9574 native (non-PAS) WCSS image loader. It is similar
to IPQ8074 WCSS, but requires several new clocks. These clocks must be
enabled in non-PAS mode, and are not optional. Add an example that
uses the "qcom,ipq9574-wcss-pil" binding.
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
---
.../remoteproc/qcom,ipq9574-wcss-pil.yaml | 102 ++++++++++++++++++
1 file changed, 102 insertions(+)
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,ipq9574-wcss-pil.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,ipq9574-wcss-pil.yaml
index d28f42661d084..3daa1cb736bf2 100644
--- a/Documentation/devicetree/bindings/remoteproc/qcom,ipq9574-wcss-pil.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,ipq9574-wcss-pil.yaml
@@ -18,6 +18,7 @@ properties:
compatible:
enum:
- qcom,ipq8074-wcss-pil
+ - qcom,ipq9574-wcss-pil
- qcom,qcs404-wcss-pil
reg:
@@ -112,6 +113,7 @@ allOf:
contains:
enum:
- qcom,ipq8074-wcss-pil
+ - qcom,ipq9574-wcss-pil
then:
properties:
qcom,smem-states:
@@ -136,6 +138,35 @@ allOf:
items:
- const: stop
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,ipq9574-wcss-pil
+ then:
+ properties:
+ clocks:
+ minItems: 13
+ clock-names:
+ items:
+ - const: anoc_wcss_axi_m
+ - const: wcss_ahb_s
+ - const: wcss_ecahb
+ - const: wcss_acmt
+ - const: wcss_axi_m
+ - const: q6_axim
+ - const: q6_axim2
+ - const: q6_ahb
+ - const: q6_ahb_s
+ - const: q6ss_boot
+ - const: mem_noc_q6_axi
+ - const: wcss_q6_tbu
+ - const: sys_noc_wcss_ahb
+ required:
+ - clocks
+ - clock-names
+
- if:
properties:
compatible:
@@ -165,3 +196,74 @@ allOf:
- cx-supply
additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,ipq9574-gcc.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/reset/qcom,ipq9574-gcc.h>
+
+ q6v5_wcss: remoteproc@cd00000 {
+ compatible = "qcom,ipq9574-wcss-pil";
+ reg = <0x0cd00000 0x4040>,
+ <0x004ab000 0x20>;
+ reg-names = "qdsp6", "rmb";
+
+ interrupts-extended = <&intc GIC_SPI 325 IRQ_TYPE_EDGE_RISING>,
+ <&wcss_smp2p_in 0 IRQ_TYPE_NONE>,
+ <&wcss_smp2p_in 1 IRQ_TYPE_NONE>,
+ <&wcss_smp2p_in 2 IRQ_TYPE_NONE>,
+ <&wcss_smp2p_in 3 IRQ_TYPE_NONE>;
+ interrupt-names = "wdog", "fatal", "ready",
+ "handover", "stop-ack";
+
+ resets = <&gcc GCC_WCSSAON_RESET>,
+ <&gcc GCC_WCSS_BCR>,
+ <&gcc GCC_WCSS_Q6_BCR>;
+ reset-names = "wcss_aon_reset",
+ "wcss_reset",
+ "wcss_q6_reset";
+
+ clocks = <&gcc GCC_ANOC_WCSS_AXI_M_CLK>,
+ <&gcc GCC_WCSS_AHB_S_CLK>,
+ <&gcc GCC_WCSS_ECAHB_CLK>,
+ <&gcc GCC_WCSS_ACMT_CLK>,
+ <&gcc GCC_WCSS_AXI_M_CLK>,
+ <&gcc GCC_Q6_AXIM_CLK>,
+ <&gcc GCC_Q6_AXIM2_CLK>,
+ <&gcc GCC_Q6_AHB_CLK>,
+ <&gcc GCC_Q6_AHB_S_CLK>,
+ <&gcc GCC_Q6SS_BOOT_CLK>,
+ <&gcc GCC_MEM_NOC_Q6_AXI_CLK>,
+ <&gcc GCC_WCSS_Q6_TBU_CLK>,
+ <&gcc GCC_SYS_NOC_WCSS_AHB_CLK>;
+
+ clock-names = "anoc_wcss_axi_m",
+ "wcss_ahb_s",
+ "wcss_ecahb",
+ "wcss_acmt",
+ "wcss_axi_m",
+ "q6_axim",
+ "q6_axim2",
+ "q6_ahb",
+ "q6_ahb_s",
+ "q6ss_boot",
+ "mem_noc_q6_axi",
+ "wcss_q6_tbu",
+ "sys_noc_wcss_ahb";
+
+ qcom,halt-regs = <&tcsr 0x18000 0x1b000 0xe000>;
+
+ qcom,smem-states = <&wcss_smp2p_out 0>,
+ <&wcss_smp2p_out 1>;
+ qcom,smem-state-names = "shutdown",
+ "stop";
+ memory-region = <&q6_region>;
+
+ glink-edge {
+ interrupts = <GIC_SPI 321 IRQ_TYPE_EDGE_RISING>;
+ label = "rtr";
+ qcom,remote-pid = <1>;
+ mboxes = <&apcs_glb 8>;
+ };
+ };
--
2.45.1
next prev parent reply other threads:[~2025-12-10 0:37 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-12-10 0:37 [PATCH RFC 0/3] remoteproc/qcom,q6v5: introduce IPQ9574 Alexandru Gagniuc
2025-12-10 0:37 ` [PATCH RFC 1/3] dt-bindings: remoteproc: qcom,ipq8074-wcss-pil: convert to DT schema Alexandru Gagniuc
2025-12-16 5:53 ` Krzysztof Kozlowski
2025-12-17 5:01 ` Alex G.
2025-12-17 7:55 ` Krzysztof Kozlowski
2025-12-10 0:37 ` Alexandru Gagniuc [this message]
2025-12-10 0:37 ` [PATCH RFC 3/3] arm64: dts: qcom: ipq8074: add remoteproc nodes Alexandru Gagniuc
2025-12-10 4:04 ` Dmitry Baryshkov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251210003729.3909663-3-mr.nuke.me@gmail.com \
--to=mr.nuke.me@gmail.com \
--cc=andersson@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=konradybcio@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-remoteproc@vger.kernel.org \
--cc=mathieu.poirier@linaro.org \
--cc=placeholder@kernel.org \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).