[PATCH 2/2] arm64: dts: qcom: agatti: Address Gunyah memory alignment needs

[Sumit Garg <sumit.garg@oss.qualcomm.com>]

Gunyah hypervisor requires it's memory start address to be 2MB aligned.
So the address map for Agatti is updated to incorporate that requirement.
This should be a backwards compatible DT change which should work with
legacy QHEE based firmware stack too.

Signed-off-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
---
 arch/arm64/boot/dts/qcom/agatti.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/agatti.dtsi b/arch/arm64/boot/dts/qcom/agatti.dtsi
index e705eb24160a..153916980ac0 100644
--- a/arch/arm64/boot/dts/qcom/agatti.dtsi
+++ b/arch/arm64/boot/dts/qcom/agatti.dtsi
@@ -298,8 +298,8 @@ reserved_memory: reserved-memory {
 		#size-cells = <2>;
 		ranges;
 
-		hyp_mem: hyp@45700000 {
-			reg = <0x0 0x45700000 0x0 0x600000>;
+		hyp_mem: hyp@45600000 {
+			reg = <0x0 0x45600000 0x0 0x700000>;
 			no-map;
 		};
 
-- 
2.51.0