[PATCH v5 1/2] dt-bindings: bluetooth: qcom,qcc2072-bt: add bindings for QCC2072

[Vivek Sahu <vivek.sahu@oss.qualcomm.com>]

QCC2072 is a WiFi/BT connectivity radios which exposes
UART as an interface for Bluetooth part.
It requires different configuartions and firmware, so
document it as a new compatible string.

Signed-off-by: Vivek Sahu <vivek.sahu@oss.qualcomm.com>
---
 .../net/bluetooth/qcom,qcc2072-bt.yaml        | 47 +++++++++++++++++++
 1 file changed, 47 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/net/bluetooth/qcom,qcc2072-bt.yaml

diff --git a/Documentation/devicetree/bindings/net/bluetooth/qcom,qcc2072-bt.yaml b/Documentation/devicetree/bindings/net/bluetooth/qcom,qcc2072-bt.yaml
new file mode 100644
index 000000000000..7b27c2c651fa
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/bluetooth/qcom,qcc2072-bt.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/bluetooth/qcom,qcc2072-bt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm QCC2072 Bluetooth
+
+maintainers:
+  - Balakrishna Godavarthi <quic_bgodavar@quicinc.com>
+  - Rocky Liao <quic_rjliao@quicinc.com>
+
+description:
+  Qualcomm QCC2072 is a UART-based Bluetooth controller.
+
+properties:
+  compatible:
+    enum:
+      - qcom,qcc2072-bt
+
+  enable-gpios:
+    maxItems: 1
+    description: GPIO specifier for the chip interrupt.
+
+required:
+  - compatible
+  - enable-gpios
+
+allOf:
+  - $ref: bluetooth-controller.yaml#
+  - $ref: qcom,bluetooth-common.yaml
+  - $ref: /schemas/serial/serial-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    serial {
+        bluetooth {
+            compatible = "qcom,qcc2072-bt";
+            enable-gpios = <&tlmm 19 IRQ_TYPE_EDGE_FALLING>;
+            max-speed = <3200000>;
+        };
+    };
-- 
2.34.1