From: Sibi Sankar <sibi.sankar@oss.qualcomm.com>
To: robh@kernel.org, srini@kernel.org, amahesh@qti.qualcomm.com,
krzk+dt@kernel.org, conor+dt@kernel.org, andersson@kernel.org,
konradybcio@kernel.org
Cc: linux-arm-msm@vger.kernel.org, dri-devel@lists.freedesktop.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
Mohammad Rafi Shaik <mohammad.rafi.shaik@oss.qualcomm.com>
Subject: [PATCH V6 4/5] arm64: dts: glymur: Add LPASS macro codecs and pinctrl
Date: Wed, 25 Mar 2026 09:23:37 +0530 [thread overview]
Message-ID: <20260325035338.1393287-5-sibi.sankar@oss.qualcomm.com> (raw)
In-Reply-To: <20260325035338.1393287-1-sibi.sankar@oss.qualcomm.com>
From: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Add LPASS macro codecs and LPASS TLMM pin controller on Qualcomm glymur.
for proper sound support.
Also add GPR(Generic Pack router) node along with
APM(Audio Process Manager) and PRM(Proxy resource
Manager) audio services.
Co-developed-by: Mohammad Rafi Shaik <mohammad.rafi.shaik@oss.qualcomm.com>
Signed-off-by: Mohammad Rafi Shaik <mohammad.rafi.shaik@oss.qualcomm.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
---
arch/arm64/boot/dts/qcom/glymur.dtsi | 263 +++++++++++++++++++++++++++
1 file changed, 263 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/glymur.dtsi b/arch/arm64/boot/dts/qcom/glymur.dtsi
index e571710de40e..61a5f263f5ad 100644
--- a/arch/arm64/boot/dts/qcom/glymur.dtsi
+++ b/arch/arm64/boot/dts/qcom/glymur.dtsi
@@ -17,7 +17,9 @@
#include <dt-bindings/power/qcom,rpmhpd.h>
#include <dt-bindings/power/qcom-rpmpd.h>
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include <dt-bindings/soc/qcom,gpr.h>
#include <dt-bindings/soc/qcom,rpmh-rsc.h>
+#include <dt-bindings/sound/qcom,q6dsp-lpass-ports.h>
#include <dt-bindings/spmi/spmi.h>
#include "glymur-ipcc.h"
@@ -3818,9 +3820,138 @@ compute-cb@8 {
dma-coherent;
};
};
+
+ gpr {
+ compatible = "qcom,gpr";
+ qcom,glink-channels = "adsp_apps";
+ qcom,domain = <GPR_DOMAIN_ID_ADSP>;
+ qcom,intents = <512 20>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ q6apm: service@1 {
+ compatible = "qcom,q6apm";
+ reg = <GPR_APM_MODULE_IID>;
+ #sound-dai-cells = <0>;
+ qcom,protection-domain = "avs/audio",
+ "msm/adsp/audio_pd";
+
+ q6apmbedai: bedais {
+ compatible = "qcom,q6apm-lpass-dais";
+ #sound-dai-cells = <1>;
+ };
+
+ q6apmdai: dais {
+ compatible = "qcom,q6apm-dais";
+ iommus = <&apps_smmu 0x1004 0x80>,
+ <&apps_smmu 0x1061 0x20>;
+ };
+ };
+
+ q6prm: service@2 {
+ compatible = "qcom,q6prm";
+ reg = <GPR_PRM_MODULE_IID>;
+ qcom,protection-domain = "avs/audio",
+ "msm/adsp/audio_pd";
+
+ q6prmcc: clock-controller {
+ compatible = "qcom,q6prm-lpass-clocks";
+ #clock-cells = <2>;
+ };
+ };
+ };
};
};
+ swr0: soundwire@6c80000 {
+ compatible = "qcom,soundwire-v3.1.0";
+ reg = <0x0 0x06c80000 0x0 0x10000>;
+ interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&lpass_wsamacro>;
+ clock-names = "iface";
+ label = "WSA";
+
+ pinctrl-0 = <&wsa_swr_active>;
+ pinctrl-names = "default";
+
+ qcom,ports-block-pack-mode = /bits/ 8 <0x00 0x01 0x01 0x00 0x01 0x01 0x00 0x00 0x00 0x00 0x00 0x01 0x01 0x00 0x00 0x01 0x01>;
+ qcom,ports-word-length = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0xff 0x18 0x18 0xff 0xff>;
+ qcom,ports-offset1 = /bits/ 8 <0x01 0x03 0x05 0x02 0x04 0x15 0x00 0xff 0xff 0xff 0xff 0x06 0x0d 0x0 0x19 0x06 0x06>;
+ qcom,ports-offset2 = /bits/ 8 <0xff 0x07 0x1f 0xff 0x07 0x1f 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+ qcom,ports-sinterval = /bits/ 16 <0x07 0x1f 0x3f 0x07 0x1f 0x3f 0xc8 0xff 0xff 0xff 0xff 0x0f 0x0f 0x31f 0x31f 0x0f 0x0f >;
+ qcom,ports-hstart = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0xff 0xf 0xf 0xff 0xff>;
+ qcom,ports-hstop = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0xff 0x0f 0x0f 0xff 0xff>;
+ qcom,ports-lane-control = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+ qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+ #sound-dai-cells = <1>;
+ status = "disabled";
+ };
+
+ lpass_wsamacro: codec@6c90000 {
+ compatible = "qcom,glymur-lpass-wsa-macro", "qcom,sm8550-lpass-wsa-macro";
+ reg = <0x0 0x06c90000 0x0 0x1000>;
+ clocks = <&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+ <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+ <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+ <&lpass_vamacro>;
+ clock-names = "mclk",
+ "macro",
+ "dcodec",
+ "fsgen";
+
+ #clock-cells = <0>;
+ clock-output-names = "mclk";
+ #sound-dai-cells = <1>;
+ sound-name-prefix = "WSA";
+ };
+
+ swr3: soundwire@6ca0000 {
+ compatible = "qcom,soundwire-v3.1.0";
+ reg = <0x0 0x06ca0000 0x0 0x10000>;
+ interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&lpass_wsa2macro>;
+ clock-names = "iface";
+ label = "WSA2";
+
+ pinctrl-0 = <&wsa2_swr_active>;
+ pinctrl-names = "default";
+
+ qcom,ports-block-pack-mode = /bits/ 8 <0x00 0x01 0x01 0x00 0x01 0x01 0x00 0x00 0x00 0x00 0x00 0x01 0x01 0x00 0x00 0x01 0x01>;
+ qcom,ports-word-length = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0xff 0x18 0x18 0xff 0xff>;
+ qcom,ports-offset1 = /bits/ 8 <0x01 0x03 0x05 0x02 0x04 0x15 0x00 0xff 0xff 0xff 0xff 0x06 0x0d 0x0 0x19 0x06 0x06>;
+ qcom,ports-offset2 = /bits/ 8 <0xff 0x07 0x1f 0xff 0x07 0x1f 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+ qcom,ports-sinterval = /bits/ 16 <0x07 0x1f 0x3f 0x07 0x1f 0x3f 0xc8 0xff 0xff 0xff 0xff 0x0f 0x0f 0x31f 0x31f 0x0f 0x0f >;
+ qcom,ports-hstart = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0xff 0xf 0xf 0xff 0xff>;
+ qcom,ports-hstop = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0xff 0x0f 0x0f 0xff 0xff>;
+ qcom,ports-lane-control = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+ qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+
+ #address-cells = <2>;
+ #size-cells = <0>;
+ #sound-dai-cells = <1>;
+ status = "disabled";
+ };
+
+ lpass_wsa2macro: codec@6cb0000 {
+ compatible = "qcom,glymur-lpass-wsa-macro", "qcom,sm8550-lpass-wsa-macro";
+ reg = <0x0 0x06cb0000 0x0 0x1000>;
+ clocks = <&q6prmcc LPASS_CLK_ID_WSA2_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+ <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+ <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+ <&lpass_vamacro>;
+ clock-names = "mclk",
+ "macro",
+ "dcodec",
+ "fsgen";
+
+ #clock-cells = <0>;
+ clock-output-names = "wsa2-mclk";
+ #sound-dai-cells = <1>;
+ sound-name-prefix = "WSA2";
+ };
+
lpass_lpiaon_noc: interconnect@7400000 {
compatible = "qcom,glymur-lpass-lpiaon-noc";
reg = <0x0 0x07400000 0x0 0x19080>;
@@ -3835,6 +3966,138 @@ lpass_lpicx_noc: interconnect@7420000 {
#interconnect-cells = <2>;
};
+ lpass_vamacro: codec@7660000 {
+ compatible = "qcom,glymur-lpass-va-macro", "qcom,sm8550-lpass-va-macro";
+ reg = <0x0 0x07660000 0x0 0x2000>;
+ clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+ <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+ <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+ clock-names = "mclk",
+ "macro",
+ "dcodec";
+
+ #clock-cells = <0>;
+ clock-output-names = "fsgen";
+ #sound-dai-cells = <1>;
+ };
+
+ lpass_tlmm: pinctrl@7760000 {
+ compatible = "qcom,glymur-lpass-lpi-pinctrl", "qcom,sm8650-lpass-lpi-pinctrl";
+ reg = <0x0 0x07760000 0x0 0x20000>;
+
+ clocks = <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+ <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+ clock-names = "core", "audio";
+
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&lpass_tlmm 0 0 23>;
+
+ tx_swr_active: tx-swr-active-state {
+ clk-pins {
+ pins = "gpio0";
+ function = "swr_tx_clk";
+ drive-strength = <2>;
+ slew-rate = <1>;
+ bias-disable;
+ };
+
+ data-pins {
+ pins = "gpio1", "gpio2";
+ function = "swr_tx_data";
+ drive-strength = <2>;
+ slew-rate = <1>;
+ bias-bus-hold;
+ };
+ };
+
+ rx_swr_active: rx-swr-active-state {
+ clk-pins {
+ pins = "gpio3";
+ function = "swr_rx_clk";
+ drive-strength = <2>;
+ slew-rate = <1>;
+ bias-disable;
+ };
+
+ data-pins {
+ pins = "gpio4", "gpio5";
+ function = "swr_rx_data";
+ drive-strength = <2>;
+ slew-rate = <1>;
+ bias-bus-hold;
+ };
+ };
+
+ dmic01_default: dmic01-default-state {
+ clk-pins {
+ pins = "gpio6";
+ function = "dmic1_clk";
+ drive-strength = <8>;
+ output-high;
+ };
+
+ data-pins {
+ pins = "gpio7";
+ function = "dmic1_data";
+ drive-strength = <8>;
+ input-enable;
+ };
+ };
+
+ dmic23_default: dmic23-default-state {
+ clk-pins {
+ pins = "gpio8";
+ function = "dmic2_clk";
+ drive-strength = <8>;
+ output-high;
+ };
+
+ data-pins {
+ pins = "gpio9";
+ function = "dmic2_data";
+ drive-strength = <8>;
+ input-enable;
+ };
+ };
+
+ wsa_swr_active: wsa-swr-active-state {
+ clk-pins {
+ pins = "gpio10";
+ function = "wsa_swr_clk";
+ drive-strength = <2>;
+ slew-rate = <1>;
+ bias-disable;
+ };
+
+ data-pins {
+ pins = "gpio11";
+ function = "wsa_swr_data";
+ drive-strength = <2>;
+ slew-rate = <1>;
+ bias-bus-hold;
+ };
+ };
+
+ wsa2_swr_active: wsa2-swr-active-state {
+ clk-pins {
+ pins = "gpio15";
+ function = "wsa2_swr_clk";
+ drive-strength = <2>;
+ slew-rate = <1>;
+ bias-disable;
+ };
+
+ data-pins {
+ pins = "gpio16";
+ function = "wsa2_swr_data";
+ drive-strength = <2>;
+ slew-rate = <1>;
+ bias-bus-hold;
+ };
+ };
+ };
+
lpass_ag_noc: interconnect@7e40000 {
compatible = "qcom,glymur-lpass-ag-noc";
reg = <0x0 0x07e40000 0x0 0xe080>;
--
2.34.1
next prev parent reply other threads:[~2026-03-25 3:54 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-03-25 3:53 [PATCH V6 0/5] Enable ADSP and CDSP for Glymur SoC Sibi Sankar
2026-03-25 3:53 ` [PATCH V6 1/5] dt-bindings: misc: qcom,fastrpc: Add compatible for Glymur Sibi Sankar
2026-03-25 3:53 ` [PATCH V6 2/5] arm64: dts: qcom: glymur: Add ADSP and CDSP for Glymur SoC Sibi Sankar
2026-03-25 3:53 ` [PATCH V6 3/5] arm64: dts: qcom: glymur-crd: Enable ADSP and CDSP Sibi Sankar
2026-03-25 3:53 ` Sibi Sankar [this message]
2026-03-25 11:21 ` [PATCH V6 4/5] arm64: dts: glymur: Add LPASS macro codecs and pinctrl Konrad Dybcio
2026-05-11 2:41 ` Sibi Sankar
2026-03-25 3:53 ` [PATCH V6 5/5] arm64: dts: qcom: glymur-crd: add Audio sound card node Sibi Sankar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260325035338.1393287-5-sibi.sankar@oss.qualcomm.com \
--to=sibi.sankar@oss.qualcomm.com \
--cc=amahesh@qti.qualcomm.com \
--cc=andersson@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=konradybcio@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mohammad.rafi.shaik@oss.qualcomm.com \
--cc=robh@kernel.org \
--cc=srini@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox