Linux ARM-MSM sub-architecture
 help / color / mirror / Atom feed
From: Daniel Lezcano <daniel.lezcano@oss.qualcomm.com>
To: sre@kernel.org, hansg@kernel.org, ilpo.jarvinen@linux.intel.com,
	linux@roeck-us.net, andersson@kernel.org, konradybcio@kernel.org,
	robh@kernel.org, krzk+dt@kernel.org, conor+dt@kernel.org
Cc: bryan.odonoghue@linaro.org, platform-driver-x86@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux-hwmon@vger.kernel.org,
	linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org
Subject: [PATCH v2 1/3] platform: arm64:: lenovo-thinkpad-t14s-ec: Add hwmon support for temperatures
Date: Tue, 30 Jun 2026 16:53:05 +0200	[thread overview]
Message-ID: <20260630145307.10745-2-daniel.lezcano@oss.qualcomm.com> (raw)
In-Reply-To: <20260630145307.10745-1-daniel.lezcano@oss.qualcomm.com>

Expose the Lenovo ThinkPad T14s EC environmental sensors through
the hwmon subsystem.

The driver now registers a hwmon device providing access to six EC
temperature sensors corresponding to the SoC, keyboard area, base
cover, PMIC/charging circuitry, QTM module and SSD. Sensor labels
are exported to allow user space to identify each measurement.

This allows standard monitoring tools such as lm-sensors to report
platform temperatures.

Signed-off-by: Daniel Lezcano daniel.lezcano@oss.qualcomm.com
---
 drivers/platform/arm64/lenovo-thinkpad-t14s.c | 128 ++++++++++++++++++
 1 file changed, 128 insertions(+)

diff --git a/drivers/platform/arm64/lenovo-thinkpad-t14s.c b/drivers/platform/arm64/lenovo-thinkpad-t14s.c
index 5590302a5694..35a6f8b0cb6b 100644
--- a/drivers/platform/arm64/lenovo-thinkpad-t14s.c
+++ b/drivers/platform/arm64/lenovo-thinkpad-t14s.c
@@ -11,6 +11,7 @@
 #include <linux/delay.h>
 #include <linux/dev_printk.h>
 #include <linux/err.h>
+#include <linux/hwmon.h>
 #include <linux/i2c.h>
 #include <linux/input.h>
 #include <linux/input/sparse-keymap.h>
@@ -67,6 +68,13 @@
 #define T14S_EC_EVT_KEY_FN_F11			0x7a
 #define T14S_EC_EVT_KEY_FN_G			0x7e
 
+#define T14S_EC_SYS_THERM0 0x78 /* SoC (CPU+GPU)  */
+#define T14S_EC_SYS_THERM1 0x79 /* Keyboard       */
+#define T14S_EC_SYS_THERM2 0x7a /* Back cover     */
+#define T14S_EC_SYS_THERM3 0x7b /* Charger / PMIC */
+#define T14S_EC_SYS_THERM6 0x7c /* QTM West       */
+#define T14S_EC_SYS_THERM7 0x7d /* SSD            */
+
 /* Hardware LED blink rate is 1 Hz (500ms off, 500ms on) */
 #define T14S_EC_BLINK_RATE_ON_OFF_MS		500
 
@@ -93,9 +101,19 @@ struct t14s_ec_led_classdev {
 	struct t14s_ec *ec;
 };
 
+struct t14s_ec_hwmon_sys_thermx {
+	const char *label;
+	int reg;
+};
+
+struct t14s_ec_hwmon {
+	struct t14s_ec_hwmon_sys_thermx *sys_thermx;
+};
+
 struct t14s_ec {
 	struct regmap *regmap;
 	struct device *dev;
+	struct t14s_ec_hwmon ec_hwmon;
 	struct t14s_ec_led_classdev led_pwr_btn;
 	struct t14s_ec_led_classdev led_chrg_orange;
 	struct t14s_ec_led_classdev led_chrg_white;
@@ -555,6 +573,112 @@ static irqreturn_t t14s_ec_irq_handler(int irq, void *data)
 	return IRQ_HANDLED;
 }
 
+static umode_t t14s_ec_hwmon_is_visible(const void *drvdata,
+					enum hwmon_sensor_types type,
+					u32 attr, int channel)
+{
+	switch (type) {
+	case hwmon_temp:
+		if (attr == hwmon_temp_input ||
+		    attr == hwmon_temp_label)
+			return 0444;
+		break;
+	default:
+		return 0;
+	}
+
+	return 0;
+}
+
+static int t14s_ec_hwmon_read_string(struct device *dev, enum hwmon_sensor_types type,
+				     u32 attr, int channel, const char **str)
+{
+	struct t14s_ec *ec = dev_get_drvdata(dev);
+	switch (type) {
+	case hwmon_temp:
+		if (attr == hwmon_temp_label) {
+			*str = ec->ec_hwmon.sys_thermx[channel].label;
+			return 0;
+		}
+		break;
+	default:
+		return -EOPNOTSUPP;
+	}
+
+	return -EOPNOTSUPP;
+}
+
+static int t14s_ec_hwmon_read(struct device *dev, enum hwmon_sensor_types type,
+			      u32 attr, int channel, long *val)
+{
+	struct t14s_ec *ec = dev_get_drvdata(dev);
+	unsigned int value;
+	int ret;
+
+	switch (type) {
+	case hwmon_temp:
+		if (attr == hwmon_temp_input) {
+			ret = t14s_ec_read(ec, ec->ec_hwmon.sys_thermx[channel].reg, &value);
+			if (ret)
+				return ret;
+			*val = value * 1000;
+
+			return 0;
+		}
+		break;
+	default:
+		break;
+	}
+
+	return -EOPNOTSUPP;
+}
+
+static const struct hwmon_ops t14s_ec_hwmon_ops = {
+	.is_visible = t14s_ec_hwmon_is_visible,
+	.read = t14s_ec_hwmon_read,
+	.read_string = t14s_ec_hwmon_read_string,
+};
+
+static const struct hwmon_channel_info *t14s_ec_hwmon_info[] = {
+	HWMON_CHANNEL_INFO(temp,
+			   HWMON_T_INPUT | HWMON_T_LABEL,
+			   HWMON_T_INPUT | HWMON_T_LABEL,
+			   HWMON_T_INPUT | HWMON_T_LABEL,
+			   HWMON_T_INPUT | HWMON_T_LABEL,
+			   HWMON_T_INPUT | HWMON_T_LABEL,
+			   HWMON_T_INPUT | HWMON_T_LABEL),
+	NULL
+};
+
+static const struct hwmon_chip_info t14s_ec_chip_info = {
+	.ops = &t14s_ec_hwmon_ops,
+	.info = t14s_ec_hwmon_info,
+};
+
+static int t14s_ec_hwmon_probe(struct t14s_ec *ec)
+{
+	struct device *dev;
+	struct t14s_ec_hwmon_sys_thermx sys_thermx[] = {
+		{ .label = "soc",	.reg = T14S_EC_SYS_THERM0 },
+		{ .label = "keyboard",	.reg = T14S_EC_SYS_THERM1 },
+		{ .label = "base",	.reg = T14S_EC_SYS_THERM2 },
+		{ .label = "charging",	.reg = T14S_EC_SYS_THERM3 },
+		{ .label = "qtm",	.reg = T14S_EC_SYS_THERM6 },
+		{ .label = "ssd",	.reg = T14S_EC_SYS_THERM7 },
+	};
+
+	ec->ec_hwmon.sys_thermx = devm_kmemdup_array(ec->dev, sys_thermx,
+						     ARRAY_SIZE(sys_thermx),
+						     sizeof(sys_thermx[0]), GFP_KERNEL);
+	if (!ec->ec_hwmon.sys_thermx)
+		return -ENOMEM;
+
+	dev = devm_hwmon_device_register_with_info(ec->dev, "t14s_ec", ec,
+						   &t14s_ec_chip_info, NULL);
+
+	return PTR_ERR_OR_ZERO(dev);
+}
+
 static int t14s_ec_probe(struct i2c_client *client)
 {
 	struct device *dev = &client->dev;
@@ -590,6 +714,10 @@ static int t14s_ec_probe(struct i2c_client *client)
 	if (ret < 0)
 		return ret;
 
+	ret = t14s_ec_hwmon_probe(ec);
+	if (ret < 0)
+		return ret;
+
 	ret = devm_request_threaded_irq(dev, client->irq, NULL,
 					t14s_ec_irq_handler,
 					IRQF_ONESHOT, dev_name(dev), ec);
-- 
2.53.0


  reply	other threads:[~2026-06-30 14:53 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-06-30 14:53 [PATCH v2 0/3] Lenovo ThinkPad T14s EC thermal monitoring and thermal zone integration Daniel Lezcano
2026-06-30 14:53 ` Daniel Lezcano [this message]
2026-06-30 15:08   ` [PATCH v2 1/3] platform: arm64:: lenovo-thinkpad-t14s-ec: Add hwmon support for temperatures Ilpo Järvinen
2026-06-30 14:53 ` [PATCH v2 2/3] platform: arm64: lenovo-thinkpad-t14s: Wire EC thermal events to hwmon Daniel Lezcano
2026-06-30 15:03   ` Ilpo Järvinen
2026-06-30 14:53 ` [PATCH v2 3/3] arm64: dts: qcom: x1e78100-t14s: Add thermal zones for keyboard skin and charging sensors Daniel Lezcano

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260630145307.10745-2-daniel.lezcano@oss.qualcomm.com \
    --to=daniel.lezcano@oss.qualcomm.com \
    --cc=andersson@kernel.org \
    --cc=bryan.odonoghue@linaro.org \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=hansg@kernel.org \
    --cc=ilpo.jarvinen@linux.intel.com \
    --cc=konradybcio@kernel.org \
    --cc=krzk+dt@kernel.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-hwmon@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@roeck-us.net \
    --cc=platform-driver-x86@vger.kernel.org \
    --cc=robh@kernel.org \
    --cc=sre@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox