Re: [PATCH V3 5/5] arm64: dts: qcom: glymur-crd: Enable ADSP and CDSP

[Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>]

On 1/31/26 8:54 AM, Dmitry Baryshkov wrote:
> On Fri, Jan 30, 2026 at 10:55:24AM +0100, Konrad Dybcio wrote:
>> On 1/29/26 1:13 AM, Sibi Sankar wrote:
>>> Enable ADSP and CDSP on Glymur CRD board.
>>>
>>> Signed-off-by: Sibi Sankar <sibi.sankar@oss.qualcomm.com>
>>> ---
>>>  arch/arm64/boot/dts/qcom/glymur-crd.dts | 14 ++++++++++++++
>>>  1 file changed, 14 insertions(+)
>>>
>>> diff --git a/arch/arm64/boot/dts/qcom/glymur-crd.dts b/arch/arm64/boot/dts/qcom/glymur-crd.dts
>>> index 0899214465ac..0eed4faa8b07 100644
>>> --- a/arch/arm64/boot/dts/qcom/glymur-crd.dts
>>> +++ b/arch/arm64/boot/dts/qcom/glymur-crd.dts
>>> @@ -487,6 +487,20 @@ &pon_resin {
>>>  	status = "okay";
>>>  };
>>>  
>>> +&remoteproc_adsp {
>>> +	firmware-name = "qcom/glymur/adsp.mbn",
>>> +			"qcom/glymur/adsp_dtb.mbn";
>>> +
>>> +	status = "okay";
>>> +};
>>> +
>>> +&remoteproc_cdsp {
>>> +	firmware-name = "qcom/glymur/cdsp.mbn",
>>> +			"qcom/glymur/cdsp_dtb.mbn";
>>> +
>>> +	status = "okay";
>>> +};
>>
>> Please make sure it gets to L-F (only Kaanapali is there right now)
>>
>> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
> 
> Hmm, looking at x1e80100-crd which references qcom/x1e80100/adsp.mbn,
> but the firmware in linux-firmware is (now) targeting IoT devices,
> should we use WoA-like names for firmware on Glymur CRD instead
> (qcadsp-something.mbn). It would match what was done for the SC8280XP
> CRD.

I think it's simply time to stop pretending the firmware is generic
(some fw simply isn't and some fw may come from different/incompatible
branchpoints) and include a board name in the path

Konrad