* (unknown),
@ 2013-09-24 3:13 Rohit Vaswani
[not found] ` <1379992406-3541-1-git-send-email-rvaswani-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2013-09-24 3:13 ` [PATCH 3/3] defconfig: msm_defconfig: Enable CONFIG_ARCH_MSM8974 Rohit Vaswani
0 siblings, 2 replies; 13+ messages in thread
From: Rohit Vaswani @ 2013-09-24 3:13 UTC (permalink / raw)
To: Russell King
Cc: Rohit Vaswani, David Brown, Daniel Walker, Bryan Huntsman,
linux-arm-kernel, linux-arm-msm, linux-kernel
Date: Mon, 23 Sep 2013 19:51:25 -0700
Subject: [PATCH 1/3] ARM: debug: Create CONFIG_DEBUG_MSM_UART and re-organize
the selects for MSM
Create the hidden config DEBUG_MSM_UART and clean-up the default selection
for CONFIG_DEBUG_LL_INCLUDE.
Signed-off-by: Rohit Vaswani <rvaswani@codeaurora.org>
---
arch/arm/Kconfig.debug | 15 ++++++++++-----
1 file changed, 10 insertions(+), 5 deletions(-)
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 9762c84..e18a6fc 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -318,6 +318,7 @@ choice
config DEBUG_MSM_UART1
bool "Kernel low-level debugging messages via MSM UART1"
depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50
+ select DEBUG_MSM_UART
help
Say Y here if you want the debug print routines to direct
their output to the first serial port on MSM devices.
@@ -325,6 +326,7 @@ choice
config DEBUG_MSM_UART2
bool "Kernel low-level debugging messages via MSM UART2"
depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50
+ select DEBUG_MSM_UART
help
Say Y here if you want the debug print routines to direct
their output to the second serial port on MSM devices.
@@ -332,6 +334,7 @@ choice
config DEBUG_MSM_UART3
bool "Kernel low-level debugging messages via MSM UART3"
depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50
+ select DEBUG_MSM_UART
help
Say Y here if you want the debug print routines to direct
their output to the third serial port on MSM devices.
@@ -340,6 +343,7 @@ choice
bool "Kernel low-level debugging messages via MSM 8660 UART"
depends on ARCH_MSM8X60
select MSM_HAS_DEBUG_UART_HS
+ select DEBUG_MSM_UART
help
Say Y here if you want the debug print routines to direct
their output to the serial port on MSM 8660 devices.
@@ -348,6 +352,7 @@ choice
bool "Kernel low-level debugging messages via MSM 8960 UART"
depends on ARCH_MSM8960
select MSM_HAS_DEBUG_UART_HS
+ select DEBUG_MSM_UART
help
Say Y here if you want the debug print routines to direct
their output to the serial port on MSM 8960 devices.
@@ -880,6 +885,10 @@ config DEBUG_STI_UART
bool
depends on ARCH_STI
+config DEBUG_MSM_UART
+ bool
+ depends on ARCH_MSM
+
config DEBUG_LL_INCLUDE
string
default "debug/8250.S" if DEBUG_LL_UART_8250 || DEBUG_UART_8250
@@ -895,11 +904,7 @@ config DEBUG_LL_INCLUDE
DEBUG_IMX53_UART ||\
DEBUG_IMX6Q_UART || \
DEBUG_IMX6SL_UART
- default "debug/msm.S" if DEBUG_MSM_UART1 || \
- DEBUG_MSM_UART2 || \
- DEBUG_MSM_UART3 || \
- DEBUG_MSM8660_UART || \
- DEBUG_MSM8960_UART
+ default "debug/msm.S" if DEBUG_MSM_UART
default "debug/omap2plus.S" if DEBUG_OMAP2PLUS_UART
default "debug/sirf.S" if DEBUG_SIRFPRIMA2_UART1 || DEBUG_SIRFMARCO_UART1
default "debug/sti.S" if DEBUG_STI_UART
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation
^ permalink raw reply related [flat|nested] 13+ messages in thread[parent not found: <1379992406-3541-1-git-send-email-rvaswani-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>]
* [PATCHv4 2/3] ARM: msm: Add support for APQ8074 Dragonboard [not found] ` <1379992406-3541-1-git-send-email-rvaswani-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org> @ 2013-09-24 3:13 ` Rohit Vaswani 2013-09-25 19:49 ` Kumar Gala 0 siblings, 1 reply; 13+ messages in thread From: Rohit Vaswani @ 2013-09-24 3:13 UTC (permalink / raw) To: David Brown Cc: Rohit Vaswani, Rob Herring, Pawel Moll, Mark Rutland, Stephen Warren, Ian Campbell, Russell King, Daniel Walker, Bryan Huntsman, devicetree-u79uwXL29TY76Z2rM5mHXA, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, linux-kernel-u79uwXL29TY76Z2rM5mHXA, linux-arm-msm-u79uwXL29TY76Z2rM5mHXA This patch adds basic board support for APQ8074 Dragonboard which belongs to the Snapdragon 800 family. For now, just support a basic machine with device tree. Signed-off-by: Rohit Vaswani <rvaswani-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org> --- arch/arm/Kconfig.debug | 9 +++++++ arch/arm/boot/dts/Makefile | 3 ++- arch/arm/boot/dts/qcom-apq8074-dragonboard.dts | 6 +++++ arch/arm/boot/dts/qcom-msm8974.dtsi | 35 ++++++++++++++++++++++++++ arch/arm/include/debug/msm.S | 5 ++++ arch/arm/mach-msm/Kconfig | 13 ++++++++++ arch/arm/mach-msm/board-dt.c | 9 +++++++ 7 files changed, 79 insertions(+), 1 deletion(-) create mode 100644 arch/arm/boot/dts/qcom-apq8074-dragonboard.dts create mode 100644 arch/arm/boot/dts/qcom-msm8974.dtsi diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index e18a6fc..959b2c7 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -357,6 +357,15 @@ choice Say Y here if you want the debug print routines to direct their output to the serial port on MSM 8960 devices. + config DEBUG_MSM8974_UART + bool "Kernel low-level debugging messages via MSM 8974 UART" + depends on ARCH_MSM8974 + select MSM_HAS_DEBUG_UART_HS + select DEBUG_MSM_UART + help + Say Y here if you want the debug print routines to direct + their output to the serial port on MSM 8974 devices. + config DEBUG_MVEBU_UART bool "Kernel low-level debugging messages via MVEBU UART (old bootloaders)" depends on ARCH_MVEBU diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 000cf76..e71a3ec 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -102,7 +102,8 @@ dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-cloudbox.dtb \ kirkwood-openblocks_a6.dtb dtb-$(CONFIG_ARCH_MARCO) += marco-evb.dtb dtb-$(CONFIG_ARCH_MSM) += msm8660-surf.dtb \ - msm8960-cdp.dtb + msm8960-cdp.dtb \ + qcom-apq8074-dragonboard.dtb dtb-$(CONFIG_ARCH_MVEBU) += armada-370-db.dtb \ armada-370-mirabox.dtb \ armada-370-netgear-rn102.dtb \ diff --git a/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts b/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts new file mode 100644 index 0000000..bb6f3c4 --- /dev/null +++ b/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts @@ -0,0 +1,6 @@ +/include/ "qcom-msm8974.dtsi" + +/ { + model = "Qualcomm APQ8074 Dragonboard"; + compatible = "qcom,apq8074-dragonboard", "qcom,apq8074"; +}; diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi new file mode 100644 index 0000000..f04b643 --- /dev/null +++ b/arch/arm/boot/dts/qcom-msm8974.dtsi @@ -0,0 +1,35 @@ +/dts-v1/; + +/include/ "skeleton.dtsi" + +/ { + model = "Qualcomm MSM8974"; + compatible = "qcom,msm8974"; + interrupt-parent = <&intc>; + + soc: soc { }; +}; + +&soc { + #address-cells = <1>; + #size-cells = <1>; + ranges; + compatible = "simple-bus"; + + intc: interrupt-controller@f9000000 { + compatible = "qcom,msm-qgic2"; + interrupt-controller; + #interrupt-cells = <3>; + reg = <0xf9000000 0x1000>, + <0xf9002000 0x1000>; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = <1 2 0xf08>, + <1 3 0xf08>, + <1 4 0xf08>, + <1 1 0xf08>; + clock-frequency = <19200000>; + }; +}; diff --git a/arch/arm/include/debug/msm.S b/arch/arm/include/debug/msm.S index 9166e1b..9d653d4 100644 --- a/arch/arm/include/debug/msm.S +++ b/arch/arm/include/debug/msm.S @@ -46,6 +46,11 @@ #define MSM_DEBUG_UART_PHYS 0x16440000 #endif +#ifdef CONFIG_DEBUG_MSM8974_UART +#define MSM_DEBUG_UART_BASE 0xFA71E000 +#define MSM_DEBUG_UART_PHYS 0xF991E000 +#endif + .macro addruart, rp, rv, tmp #ifdef MSM_DEBUG_UART_PHYS ldr \rp, =MSM_DEBUG_UART_PHYS diff --git a/arch/arm/mach-msm/Kconfig b/arch/arm/mach-msm/Kconfig index 2586c28..086bcb9 100644 --- a/arch/arm/mach-msm/Kconfig +++ b/arch/arm/mach-msm/Kconfig @@ -64,6 +64,19 @@ config ARCH_MSM_DT select SPARSE_IRQ select USE_OF +config ARCH_MSM8974 + bool "MSM8974" + select ARM_GIC + select CPU_V7 + select HAVE_ARM_ARCH_TIMER + select HAVE_SMP + select MSM_SCM if SMP + select USE_OF + +config ARCH_MSM_DT + def_bool y + depends on (ARCH_MSM8X60 || ARCH_MSM8960 || ARCH_MSM8974) + config MSM_HAS_DEBUG_UART_HS bool diff --git a/arch/arm/mach-msm/board-dt.c b/arch/arm/mach-msm/board-dt.c index 266a280..5211e80 100644 --- a/arch/arm/mach-msm/board-dt.c +++ b/arch/arm/mach-msm/board-dt.c @@ -26,7 +26,16 @@ static const char * const msm_dt_match[] __initconst = { NULL }; +static const char * const apq8074_dt_match[] __initconst = { + "qcom,apq8074-dragonboard", + NULL +}; + DT_MACHINE_START(MSM_DT, "Qualcomm MSM (Flattened Device Tree)") .smp = smp_ops(msm_smp_ops), .dt_compat = msm_dt_match, MACHINE_END + +DT_MACHINE_START(APQ_DT, "Qualcomm MSM (Flattened Device Tree)") + .dt_compat = apq8074_dt_match, +MACHINE_END -- The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, hosted by The Linux Foundation -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply related [flat|nested] 13+ messages in thread
* Re: [PATCHv4 2/3] ARM: msm: Add support for APQ8074 Dragonboard 2013-09-24 3:13 ` [PATCHv4 2/3] ARM: msm: Add support for APQ8074 Dragonboard Rohit Vaswani @ 2013-09-25 19:49 ` Kumar Gala [not found] ` <4E7868D6-56CB-4AF8-8EBF-069966899C23-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org> 0 siblings, 1 reply; 13+ messages in thread From: Kumar Gala @ 2013-09-25 19:49 UTC (permalink / raw) To: Rohit Vaswani Cc: David Brown, Rob Herring, Pawel Moll, Mark Rutland, Stephen Warren, Ian Campbell, Russell King, Daniel Walker, Bryan Huntsman, devicetree, linux-arm-kernel, linux-kernel, linux-arm-msm On Sep 23, 2013, at 10:13 PM, Rohit Vaswani wrote: > This patch adds basic board support for APQ8074 Dragonboard > which belongs to the Snapdragon 800 family. > For now, just support a basic machine with device tree. > > Signed-off-by: Rohit Vaswani <rvaswani@codeaurora.org> > --- > arch/arm/Kconfig.debug | 9 +++++++ > arch/arm/boot/dts/Makefile | 3 ++- > arch/arm/boot/dts/qcom-apq8074-dragonboard.dts | 6 +++++ > arch/arm/boot/dts/qcom-msm8974.dtsi | 35 ++++++++++++++++++++++++++ > arch/arm/include/debug/msm.S | 5 ++++ > arch/arm/mach-msm/Kconfig | 13 ++++++++++ > arch/arm/mach-msm/board-dt.c | 9 +++++++ > 7 files changed, 79 insertions(+), 1 deletion(-) > create mode 100644 arch/arm/boot/dts/qcom-apq8074-dragonboard.dts > create mode 100644 arch/arm/boot/dts/qcom-msm8974.dtsi > > diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug > index e18a6fc..959b2c7 100644 > --- a/arch/arm/Kconfig.debug > +++ b/arch/arm/Kconfig.debug > @@ -357,6 +357,15 @@ choice > Say Y here if you want the debug print routines to direct > their output to the serial port on MSM 8960 devices. > > + config DEBUG_MSM8974_UART > + bool "Kernel low-level debugging messages via MSM 8974 UART" > + depends on ARCH_MSM8974 > + select MSM_HAS_DEBUG_UART_HS > + select DEBUG_MSM_UART > + help > + Say Y here if you want the debug print routines to direct > + their output to the serial port on MSM 8974 devices. > + A little surprised you didn't pull this and the ARCH_MSM8974 into its own patch outside of this patch being board support. > config DEBUG_MVEBU_UART > bool "Kernel low-level debugging messages via MVEBU UART (old bootloaders)" > depends on ARCH_MVEBU > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile > index 000cf76..e71a3ec 100644 > --- a/arch/arm/boot/dts/Makefile > +++ b/arch/arm/boot/dts/Makefile > @@ -102,7 +102,8 @@ dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-cloudbox.dtb \ > kirkwood-openblocks_a6.dtb > dtb-$(CONFIG_ARCH_MARCO) += marco-evb.dtb > dtb-$(CONFIG_ARCH_MSM) += msm8660-surf.dtb \ > - msm8960-cdp.dtb > + msm8960-cdp.dtb \ > + qcom-apq8074-dragonboard.dtb > dtb-$(CONFIG_ARCH_MVEBU) += armada-370-db.dtb \ > armada-370-mirabox.dtb \ > armada-370-netgear-rn102.dtb \ > diff --git a/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts b/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts > new file mode 100644 > index 0000000..bb6f3c4 > --- /dev/null > +++ b/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts > @@ -0,0 +1,6 @@ > +/include/ "qcom-msm8974.dtsi" > + > +/ { > + model = "Qualcomm APQ8074 Dragonboard"; > + compatible = "qcom,apq8074-dragonboard", "qcom,apq8074"; > +}; > diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi > new file mode 100644 > index 0000000..f04b643 > --- /dev/null > +++ b/arch/arm/boot/dts/qcom-msm8974.dtsi > @@ -0,0 +1,35 @@ > +/dts-v1/; > + > +/include/ "skeleton.dtsi" > + > +/ { > + model = "Qualcomm MSM8974"; > + compatible = "qcom,msm8974"; > + interrupt-parent = <&intc>; > + > + soc: soc { }; We should have a unit address here: soc: soc@FOOBAR { also, split out the curly braces so any future patches do have to muck with that. }; > +}; > + > +&soc { > + #address-cells = <1>; > + #size-cells = <1>; > + ranges; > + compatible = "simple-bus"; > + > + intc: interrupt-controller@f9000000 { > + compatible = "qcom,msm-qgic2"; > + interrupt-controller; > + #interrupt-cells = <3>; > + reg = <0xf9000000 0x1000>, > + <0xf9002000 0x1000>; > + }; > + > + timer { > + compatible = "arm,armv7-timer"; > + interrupts = <1 2 0xf08>, > + <1 3 0xf08>, > + <1 4 0xf08>, > + <1 1 0xf08>; > + clock-frequency = <19200000>; > + }; > +}; > diff --git a/arch/arm/include/debug/msm.S b/arch/arm/include/debug/msm.S > index 9166e1b..9d653d4 100644 > --- a/arch/arm/include/debug/msm.S > +++ b/arch/arm/include/debug/msm.S > @@ -46,6 +46,11 @@ > #define MSM_DEBUG_UART_PHYS 0x16440000 > #endif > > +#ifdef CONFIG_DEBUG_MSM8974_UART > +#define MSM_DEBUG_UART_BASE 0xFA71E000 > +#define MSM_DEBUG_UART_PHYS 0xF991E000 > +#endif > + > .macro addruart, rp, rv, tmp > #ifdef MSM_DEBUG_UART_PHYS > ldr \rp, =MSM_DEBUG_UART_PHYS > diff --git a/arch/arm/mach-msm/Kconfig b/arch/arm/mach-msm/Kconfig > index 2586c28..086bcb9 100644 > --- a/arch/arm/mach-msm/Kconfig > +++ b/arch/arm/mach-msm/Kconfig > @@ -64,6 +64,19 @@ config ARCH_MSM_DT > select SPARSE_IRQ > select USE_OF > > +config ARCH_MSM8974 > + bool "MSM8974" > + select ARM_GIC > + select CPU_V7 > + select HAVE_ARM_ARCH_TIMER > + select HAVE_SMP > + select MSM_SCM if SMP > + select USE_OF > + > +config ARCH_MSM_DT > + def_bool y > + depends on (ARCH_MSM8X60 || ARCH_MSM8960 || ARCH_MSM8974) > + > config MSM_HAS_DEBUG_UART_HS > bool > > diff --git a/arch/arm/mach-msm/board-dt.c b/arch/arm/mach-msm/board-dt.c > index 266a280..5211e80 100644 > --- a/arch/arm/mach-msm/board-dt.c > +++ b/arch/arm/mach-msm/board-dt.c > @@ -26,7 +26,16 @@ static const char * const msm_dt_match[] __initconst = { > NULL > }; > > +static const char * const apq8074_dt_match[] __initconst = { > + "qcom,apq8074-dragonboard", > + NULL > +}; > + > DT_MACHINE_START(MSM_DT, "Qualcomm MSM (Flattened Device Tree)") > .smp = smp_ops(msm_smp_ops), > .dt_compat = msm_dt_match, > MACHINE_END > + > +DT_MACHINE_START(APQ_DT, "Qualcomm MSM (Flattened Device Tree)") > + .dt_compat = apq8074_dt_match, > +MACHINE_END > -- > The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, > hosted by The Linux Foundation > > -- > To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html -- Employee of Qualcomm Innovation Center, Inc. Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation ^ permalink raw reply [flat|nested] 13+ messages in thread
[parent not found: <4E7868D6-56CB-4AF8-8EBF-069966899C23-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>]
* Re: [PATCHv4 2/3] ARM: msm: Add support for APQ8074 Dragonboard [not found] ` <4E7868D6-56CB-4AF8-8EBF-069966899C23-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org> @ 2013-09-25 22:35 ` Rohit Vaswani [not found] ` <5243652F.7090408-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org> 0 siblings, 1 reply; 13+ messages in thread From: Rohit Vaswani @ 2013-09-25 22:35 UTC (permalink / raw) To: Kumar Gala Cc: David Brown, Rob Herring, Pawel Moll, Mark Rutland, Stephen Warren, Ian Campbell, Russell King, Daniel Walker, Bryan Huntsman, devicetree-u79uwXL29TY76Z2rM5mHXA, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, linux-kernel-u79uwXL29TY76Z2rM5mHXA, linux-arm-msm-u79uwXL29TY76Z2rM5mHXA On 9/25/2013 12:49 PM, Kumar Gala wrote: > On Sep 23, 2013, at 10:13 PM, Rohit Vaswani wrote: > >> This patch adds basic board support for APQ8074 Dragonboard >> which belongs to the Snapdragon 800 family. >> For now, just support a basic machine with device tree. >> >> Signed-off-by: Rohit Vaswani <rvaswani-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org> >> --- >> arch/arm/Kconfig.debug | 9 +++++++ >> arch/arm/boot/dts/Makefile | 3 ++- >> arch/arm/boot/dts/qcom-apq8074-dragonboard.dts | 6 +++++ >> arch/arm/boot/dts/qcom-msm8974.dtsi | 35 ++++++++++++++++++++++++++ >> arch/arm/include/debug/msm.S | 5 ++++ >> arch/arm/mach-msm/Kconfig | 13 ++++++++++ >> arch/arm/mach-msm/board-dt.c | 9 +++++++ >> 7 files changed, 79 insertions(+), 1 deletion(-) >> create mode 100644 arch/arm/boot/dts/qcom-apq8074-dragonboard.dts >> create mode 100644 arch/arm/boot/dts/qcom-msm8974.dtsi >> >> diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug >> index e18a6fc..959b2c7 100644 >> --- a/arch/arm/Kconfig.debug >> +++ b/arch/arm/Kconfig.debug >> @@ -357,6 +357,15 @@ choice >> Say Y here if you want the debug print routines to direct >> their output to the serial port on MSM 8960 devices. >> >> + config DEBUG_MSM8974_UART >> + bool "Kernel low-level debugging messages via MSM 8974 UART" >> + depends on ARCH_MSM8974 >> + select MSM_HAS_DEBUG_UART_HS >> + select DEBUG_MSM_UART >> + help >> + Say Y here if you want the debug print routines to direct >> + their output to the serial port on MSM 8974 devices. >> + > A little surprised you didn't pull this and the ARCH_MSM8974 into its own patch outside of this patch being board support. Well, its good to have this as part of initial board setup for earlyprintk. > >> config DEBUG_MVEBU_UART >> bool "Kernel low-level debugging messages via MVEBU UART (old bootloaders)" >> depends on ARCH_MVEBU >> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile >> index 000cf76..e71a3ec 100644 >> --- a/arch/arm/boot/dts/Makefile >> +++ b/arch/arm/boot/dts/Makefile >> @@ -102,7 +102,8 @@ dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-cloudbox.dtb \ >> kirkwood-openblocks_a6.dtb >> dtb-$(CONFIG_ARCH_MARCO) += marco-evb.dtb >> dtb-$(CONFIG_ARCH_MSM) += msm8660-surf.dtb \ >> - msm8960-cdp.dtb >> + msm8960-cdp.dtb \ >> + qcom-apq8074-dragonboard.dtb >> dtb-$(CONFIG_ARCH_MVEBU) += armada-370-db.dtb \ >> armada-370-mirabox.dtb \ >> armada-370-netgear-rn102.dtb \ >> diff --git a/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts b/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts >> new file mode 100644 >> index 0000000..bb6f3c4 >> --- /dev/null >> +++ b/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts >> @@ -0,0 +1,6 @@ >> +/include/ "qcom-msm8974.dtsi" >> + >> +/ { >> + model = "Qualcomm APQ8074 Dragonboard"; >> + compatible = "qcom,apq8074-dragonboard", "qcom,apq8074"; >> +}; >> diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi >> new file mode 100644 >> index 0000000..f04b643 >> --- /dev/null >> +++ b/arch/arm/boot/dts/qcom-msm8974.dtsi >> @@ -0,0 +1,35 @@ >> +/dts-v1/; >> + >> +/include/ "skeleton.dtsi" >> + >> +/ { >> + model = "Qualcomm MSM8974"; >> + compatible = "qcom,msm8974"; >> + interrupt-parent = <&intc>; >> + >> + soc: soc { }; > We should have a unit address here: > > soc: soc@FOOBAR { > > also, split out the curly braces so any future patches do have to muck with that. > > }; > Im not sure I understand the reasoning behind the unit address for soc ? >> +}; >> + >> +&soc { >> + #address-cells = <1>; >> + #size-cells = <1>; >> + ranges; >> + compatible = "simple-bus"; >> + >> + intc: interrupt-controller@f9000000 { >> + compatible = "qcom,msm-qgic2"; >> + interrupt-controller; >> + #interrupt-cells = <3>; >> + reg = <0xf9000000 0x1000>, >> + <0xf9002000 0x1000>; >> + }; >> + >> + timer { >> + compatible = "arm,armv7-timer"; >> + interrupts = <1 2 0xf08>, >> + <1 3 0xf08>, >> + <1 4 0xf08>, >> + <1 1 0xf08>; >> + clock-frequency = <19200000>; >> + }; >> +}; >> diff --git a/arch/arm/include/debug/msm.S b/arch/arm/include/debug/msm.S >> index 9166e1b..9d653d4 100644 >> --- a/arch/arm/include/debug/msm.S >> +++ b/arch/arm/include/debug/msm.S >> @@ -46,6 +46,11 @@ >> #define MSM_DEBUG_UART_PHYS 0x16440000 >> #endif >> >> +#ifdef CONFIG_DEBUG_MSM8974_UART >> +#define MSM_DEBUG_UART_BASE 0xFA71E000 >> +#define MSM_DEBUG_UART_PHYS 0xF991E000 >> +#endif >> + >> .macro addruart, rp, rv, tmp >> #ifdef MSM_DEBUG_UART_PHYS >> ldr \rp, =MSM_DEBUG_UART_PHYS >> diff --git a/arch/arm/mach-msm/Kconfig b/arch/arm/mach-msm/Kconfig >> index 2586c28..086bcb9 100644 >> --- a/arch/arm/mach-msm/Kconfig >> +++ b/arch/arm/mach-msm/Kconfig >> @@ -64,6 +64,19 @@ config ARCH_MSM_DT >> select SPARSE_IRQ >> select USE_OF >> >> +config ARCH_MSM8974 >> + bool "MSM8974" >> + select ARM_GIC >> + select CPU_V7 >> + select HAVE_ARM_ARCH_TIMER >> + select HAVE_SMP >> + select MSM_SCM if SMP >> + select USE_OF >> + >> +config ARCH_MSM_DT >> + def_bool y >> + depends on (ARCH_MSM8X60 || ARCH_MSM8960 || ARCH_MSM8974) >> + >> config MSM_HAS_DEBUG_UART_HS >> bool >> >> diff --git a/arch/arm/mach-msm/board-dt.c b/arch/arm/mach-msm/board-dt.c >> index 266a280..5211e80 100644 >> --- a/arch/arm/mach-msm/board-dt.c >> +++ b/arch/arm/mach-msm/board-dt.c >> @@ -26,7 +26,16 @@ static const char * const msm_dt_match[] __initconst = { >> NULL >> }; >> >> +static const char * const apq8074_dt_match[] __initconst = { >> + "qcom,apq8074-dragonboard", >> + NULL >> +}; >> + >> DT_MACHINE_START(MSM_DT, "Qualcomm MSM (Flattened Device Tree)") >> .smp = smp_ops(msm_smp_ops), >> .dt_compat = msm_dt_match, >> MACHINE_END >> + >> +DT_MACHINE_START(APQ_DT, "Qualcomm MSM (Flattened Device Tree)") >> + .dt_compat = apq8074_dt_match, >> +MACHINE_END >> -- >> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, >> hosted by The Linux Foundation >> >> -- >> To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in >> the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org >> More majordomo info at http://vger.kernel.org/majordomo-info.html Thanks, Rohit Vaswani -- The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, hosted by The Linux Foundation -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 13+ messages in thread
[parent not found: <5243652F.7090408-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>]
* Re: [PATCHv4 2/3] ARM: msm: Add support for APQ8074 Dragonboard [not found] ` <5243652F.7090408-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org> @ 2013-09-26 16:37 ` Kumar Gala 2013-09-26 18:05 ` Rohit Vaswani 0 siblings, 1 reply; 13+ messages in thread From: Kumar Gala @ 2013-09-26 16:37 UTC (permalink / raw) To: Rohit Vaswani Cc: David Brown, Rob Herring, Pawel Moll, Mark Rutland, Stephen Warren, Ian Campbell, Russell King, Daniel Walker, Bryan Huntsman, devicetree-u79uwXL29TY76Z2rM5mHXA, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, linux-kernel-u79uwXL29TY76Z2rM5mHXA, linux-arm-msm-u79uwXL29TY76Z2rM5mHXA On Sep 25, 2013, at 5:35 PM, Rohit Vaswani wrote: > On 9/25/2013 12:49 PM, Kumar Gala wrote: >> On Sep 23, 2013, at 10:13 PM, Rohit Vaswani wrote: >> >>> This patch adds basic board support for APQ8074 Dragonboard >>> which belongs to the Snapdragon 800 family. >>> For now, just support a basic machine with device tree. >>> >>> Signed-off-by: Rohit Vaswani <rvaswani-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org> >>> --- >>> arch/arm/Kconfig.debug | 9 +++++++ >>> arch/arm/boot/dts/Makefile | 3 ++- >>> arch/arm/boot/dts/qcom-apq8074-dragonboard.dts | 6 +++++ >>> arch/arm/boot/dts/qcom-msm8974.dtsi | 35 ++++++++++++++++++++++++++ >>> arch/arm/include/debug/msm.S | 5 ++++ >>> arch/arm/mach-msm/Kconfig | 13 ++++++++++ >>> arch/arm/mach-msm/board-dt.c | 9 +++++++ >>> 7 files changed, 79 insertions(+), 1 deletion(-) >>> create mode 100644 arch/arm/boot/dts/qcom-apq8074-dragonboard.dts >>> create mode 100644 arch/arm/boot/dts/qcom-msm8974.dtsi >>> >>> diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug >>> index e18a6fc..959b2c7 100644 >>> --- a/arch/arm/Kconfig.debug >>> +++ b/arch/arm/Kconfig.debug >>> @@ -357,6 +357,15 @@ choice >>> Say Y here if you want the debug print routines to direct >>> their output to the serial port on MSM 8960 devices. >>> >>> + config DEBUG_MSM8974_UART >>> + bool "Kernel low-level debugging messages via MSM 8974 UART" >>> + depends on ARCH_MSM8974 >>> + select MSM_HAS_DEBUG_UART_HS >>> + select DEBUG_MSM_UART >>> + help >>> + Say Y here if you want the debug print routines to direct >>> + their output to the serial port on MSM 8974 devices. >>> + >> A little surprised you didn't pull this and the ARCH_MSM8974 into its own patch outside of this patch being board support. > > Well, its good to have this as part of initial board setup for earlyprintk. I agree, just figured it would have been a standalone patch and a precursor to this patch. >>> config DEBUG_MVEBU_UART >>> bool "Kernel low-level debugging messages via MVEBU UART (old bootloaders)" >>> depends on ARCH_MVEBU >>> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile >>> index 000cf76..e71a3ec 100644 >>> --- a/arch/arm/boot/dts/Makefile >>> +++ b/arch/arm/boot/dts/Makefile >>> @@ -102,7 +102,8 @@ dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-cloudbox.dtb \ >>> kirkwood-openblocks_a6.dtb >>> dtb-$(CONFIG_ARCH_MARCO) += marco-evb.dtb >>> dtb-$(CONFIG_ARCH_MSM) += msm8660-surf.dtb \ >>> - msm8960-cdp.dtb >>> + msm8960-cdp.dtb \ >>> + qcom-apq8074-dragonboard.dtb >>> dtb-$(CONFIG_ARCH_MVEBU) += armada-370-db.dtb \ >>> armada-370-mirabox.dtb \ >>> armada-370-netgear-rn102.dtb \ >>> diff --git a/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts b/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts >>> new file mode 100644 >>> index 0000000..bb6f3c4 >>> --- /dev/null >>> +++ b/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts >>> @@ -0,0 +1,6 @@ >>> +/include/ "qcom-msm8974.dtsi" >>> + >>> +/ { >>> + model = "Qualcomm APQ8074 Dragonboard"; >>> + compatible = "qcom,apq8074-dragonboard", "qcom,apq8074"; >>> +}; >>> diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi >>> new file mode 100644 >>> index 0000000..f04b643 >>> --- /dev/null >>> +++ b/arch/arm/boot/dts/qcom-msm8974.dtsi >>> @@ -0,0 +1,35 @@ >>> +/dts-v1/; >>> + >>> +/include/ "skeleton.dtsi" >>> + >>> +/ { >>> + model = "Qualcomm MSM8974"; >>> + compatible = "qcom,msm8974"; >>> + interrupt-parent = <&intc>; >>> + >>> + soc: soc { }; >> We should have a unit address here: >> >> soc: soc@FOOBAR { >> >> also, split out the curly braces so any future patches do have to muck with that. >> >> }; >> > > Im not sure I understand the reasoning behind the unit address for soc ? Its fairly standard practice and there is a fair amount of discussion about the lack of a unit address for memory nodes. >>> +}; >>> + >>> +&soc { >>> + #address-cells = <1>; >>> + #size-cells = <1>; >>> + ranges; >>> + compatible = "simple-bus"; >>> + >>> + intc: interrupt-controller@f9000000 { >>> + compatible = "qcom,msm-qgic2"; >>> + interrupt-controller; >>> + #interrupt-cells = <3>; >>> + reg = <0xf9000000 0x1000>, >>> + <0xf9002000 0x1000>; >>> + }; >>> + >>> + timer { >>> + compatible = "arm,armv7-timer"; >>> + interrupts = <1 2 0xf08>, >>> + <1 3 0xf08>, >>> + <1 4 0xf08>, >>> + <1 1 0xf08>; >>> + clock-frequency = <19200000>; >>> + }; >>> +}; - k -- Employee of Qualcomm Innovation Center, Inc. Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [PATCHv4 2/3] ARM: msm: Add support for APQ8074 Dragonboard 2013-09-26 16:37 ` Kumar Gala @ 2013-09-26 18:05 ` Rohit Vaswani [not found] ` <52447779.3010908-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org> 0 siblings, 1 reply; 13+ messages in thread From: Rohit Vaswani @ 2013-09-26 18:05 UTC (permalink / raw) To: Kumar Gala Cc: David Brown, Rob Herring, Pawel Moll, Mark Rutland, Stephen Warren, Ian Campbell, Russell King, Daniel Walker, Bryan Huntsman, devicetree, linux-arm-kernel, linux-kernel, linux-arm-msm On 9/26/2013 9:37 AM, Kumar Gala wrote: > <snip> > +++ b/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts > @@ -0,0 +1,6 @@ > +/include/ "qcom-msm8974.dtsi" > + > +/ { > + model = "Qualcomm APQ8074 Dragonboard"; > + compatible = "qcom,apq8074-dragonboard", "qcom,apq8074"; > +}; > diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi > new file mode 100644 > index 0000000..f04b643 > --- /dev/null > +++ b/arch/arm/boot/dts/qcom-msm8974.dtsi > @@ -0,0 +1,35 @@ > +/dts-v1/; > + > +/include/ "skeleton.dtsi" > + > +/ { > + model = "Qualcomm MSM8974"; > + compatible = "qcom,msm8974"; > + interrupt-parent = <&intc>; > + > + soc: soc { }; >>> We should have a unit address here: >>> >>> soc: soc@FOOBAR { >>> >>> also, split out the curly braces so any future patches do have to muck with that. >>> >>> }; >>> >> Im not sure I understand the reasoning behind the unit address for soc ? > Its fairly standard practice and there is a fair amount of discussion about the lack of a unit address for memory nodes. > That still doesn't really answer anything :) - and I couldn't find any discussions about this either. I don't see anybody in upstream adding an address to soc except sun. What is that address supposed to be for - what does it mean ? The soc is way of encapsulating meaningful blocks for the particular SoC. > >>>> +}; >>>> + >>>> +&soc { >>>> + #address-cells = <1>; >>>> + #size-cells = <1>; >>>> + ranges; >>>> + compatible = "simple-bus"; >>>> + >>>> + intc: interrupt-controller@f9000000 { >>>> + compatible = "qcom,msm-qgic2"; >>>> + interrupt-controller; >>>> + #interrupt-cells = <3>; >>>> + reg = <0xf9000000 0x1000>, >>>> + <0xf9002000 0x1000>; >>>> + }; >>>> + >>>> + timer { >>>> + compatible = "arm,armv7-timer"; >>>> + interrupts = <1 2 0xf08>, >>>> + <1 3 0xf08>, >>>> + <1 4 0xf08>, >>>> + <1 1 0xf08>; >>>> + clock-frequency = <19200000>; >>>> + }; >>>> +}; > - k > Thanks, Rohit Vaswani -- The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, hosted by The Linux Foundation ^ permalink raw reply [flat|nested] 13+ messages in thread
[parent not found: <52447779.3010908-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>]
* Re: [PATCHv4 2/3] ARM: msm: Add support for APQ8074 Dragonboard [not found] ` <52447779.3010908-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org> @ 2013-09-26 19:17 ` Rohit Vaswani [not found] ` <52448852.9050608-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org> 0 siblings, 1 reply; 13+ messages in thread From: Rohit Vaswani @ 2013-09-26 19:17 UTC (permalink / raw) To: Kumar Gala Cc: David Brown, Rob Herring, Pawel Moll, Mark Rutland, Stephen Warren, Ian Campbell, Russell King, Daniel Walker, Bryan Huntsman, devicetree-u79uwXL29TY76Z2rM5mHXA, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, linux-kernel-u79uwXL29TY76Z2rM5mHXA, linux-arm-msm-u79uwXL29TY76Z2rM5mHXA On 9/26/2013 11:05 AM, Rohit Vaswani wrote: > On 9/26/2013 9:37 AM, Kumar Gala wrote: >> <snip> > >> +++ b/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts >> @@ -0,0 +1,6 @@ >> +/include/ "qcom-msm8974.dtsi" >> + >> +/ { >> + model = "Qualcomm APQ8074 Dragonboard"; >> + compatible = "qcom,apq8074-dragonboard", "qcom,apq8074"; >> +}; >> diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi >> b/arch/arm/boot/dts/qcom-msm8974.dtsi >> new file mode 100644 >> index 0000000..f04b643 >> --- /dev/null >> +++ b/arch/arm/boot/dts/qcom-msm8974.dtsi >> @@ -0,0 +1,35 @@ >> +/dts-v1/; >> + >> +/include/ "skeleton.dtsi" >> + >> +/ { >> + model = "Qualcomm MSM8974"; >> + compatible = "qcom,msm8974"; >> + interrupt-parent = <&intc>; >> + >> + soc: soc { }; >>>> We should have a unit address here: >>>> >>>> soc: soc@FOOBAR { >>>> >>>> also, split out the curly braces so any future patches do have to >>>> muck with that. >>>> >>>> }; >>>> >>> Im not sure I understand the reasoning behind the unit address for >>> soc ? >> Its fairly standard practice and there is a fair amount of discussion >> about the lack of a unit address for memory nodes. >> > That still doesn't really answer anything :) - and I couldn't find any > discussions about this either. > I don't see anybody in upstream adding an address to soc except sun. > What is that address supposed to be for - what does it mean ? > The soc is way of encapsulating meaningful blocks for the particular > SoC. I see the mail from Stephen Warren for adding a check stating that "ePAPR 1.1 section 2.2.1.1 "Node Name Requirements" specifies that any node that has a reg property must include a unit address in its name with value matching the first entry in its reg property. Conversely, if a node does not have a reg property, the node name must not include a unit address." The soc node we have does not have a reg property ? > >> >>>>> +}; >>>>> + >>>>> +&soc { >>>>> + #address-cells = <1>; >>>>> + #size-cells = <1>; >>>>> + ranges; >>>>> + compatible = "simple-bus"; >>>>> + >>>>> + intc: interrupt-controller@f9000000 { >>>>> + compatible = "qcom,msm-qgic2"; >>>>> + interrupt-controller; >>>>> + #interrupt-cells = <3>; >>>>> + reg = <0xf9000000 0x1000>, >>>>> + <0xf9002000 0x1000>; >>>>> + }; >>>>> + >>>>> + timer { >>>>> + compatible = "arm,armv7-timer"; >>>>> + interrupts = <1 2 0xf08>, >>>>> + <1 3 0xf08>, >>>>> + <1 4 0xf08>, >>>>> + <1 1 0xf08>; >>>>> + clock-frequency = <19200000>; >>>>> + }; >>>>> +}; >> - k >> > > > Thanks, > Rohit Vaswani > Thanks, Rohit Vaswani -- The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, hosted by The Linux Foundation -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 13+ messages in thread
[parent not found: <52448852.9050608-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>]
* Re: [PATCHv4 2/3] ARM: msm: Add support for APQ8074 Dragonboard [not found] ` <52448852.9050608-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org> @ 2013-09-26 19:33 ` Kumar Gala [not found] ` <50877C70-6066-4E87-9DEA-9F29D098525B-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org> 0 siblings, 1 reply; 13+ messages in thread From: Kumar Gala @ 2013-09-26 19:33 UTC (permalink / raw) To: Rohit Vaswani Cc: David Brown, Rob Herring, Pawel Moll, Mark Rutland, Stephen Warren, Ian Campbell, Russell King, Daniel Walker, Bryan Huntsman, devicetree-u79uwXL29TY76Z2rM5mHXA, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, linux-kernel-u79uwXL29TY76Z2rM5mHXA, linux-arm-msm-u79uwXL29TY76Z2rM5mHXA On Sep 26, 2013, at 2:17 PM, Rohit Vaswani wrote: > On 9/26/2013 11:05 AM, Rohit Vaswani wrote: >> On 9/26/2013 9:37 AM, Kumar Gala wrote: >>> <snip> >> >>> +++ b/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts >>> @@ -0,0 +1,6 @@ >>> +/include/ "qcom-msm8974.dtsi" >>> + >>> +/ { >>> + model = "Qualcomm APQ8074 Dragonboard"; >>> + compatible = "qcom,apq8074-dragonboard", "qcom,apq8074"; >>> +}; >>> diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi >>> new file mode 100644 >>> index 0000000..f04b643 >>> --- /dev/null >>> +++ b/arch/arm/boot/dts/qcom-msm8974.dtsi >>> @@ -0,0 +1,35 @@ >>> +/dts-v1/; >>> + >>> +/include/ "skeleton.dtsi" >>> + >>> +/ { >>> + model = "Qualcomm MSM8974"; >>> + compatible = "qcom,msm8974"; >>> + interrupt-parent = <&intc>; >>> + >>> + soc: soc { }; >>>>> We should have a unit address here: >>>>> >>>>> soc: soc@FOOBAR { >>>>> >>>>> also, split out the curly braces so any future patches do have to muck with that. >>>>> >>>>> }; >>>>> >>>> Im not sure I understand the reasoning behind the unit address for soc ? >>> Its fairly standard practice and there is a fair amount of discussion about the lack of a unit address for memory nodes. >>> >> That still doesn't really answer anything :) - and I couldn't find any discussions about this either. >> I don't see anybody in upstream adding an address to soc except sun. >> What is that address supposed to be for - what does it mean ? >> The soc is way of encapsulating meaningful blocks for the particular SoC. > > I see the mail from Stephen Warren for adding a check stating that > > "ePAPR 1.1 section 2.2.1.1 "Node Name Requirements" specifies that any > node that has a reg property must include a unit address in its name > with value matching the first entry in its reg property. Conversely, if > a node does not have a reg property, the node name must not include a > unit address." > > The soc node we have does not have a reg property ? Not 100% sure what people will decide on this. There are a number of examples on the PPC side (arch/powerpc/boot/dts) that are soc@ADDR, but they don't typically have "reg" properties at the soc level. Let's go ahead w/o the unit address (as you have it) for now. - k -- Employee of Qualcomm Innovation Center, Inc. Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 13+ messages in thread
[parent not found: <50877C70-6066-4E87-9DEA-9F29D098525B-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>]
* Re: [PATCHv4 2/3] ARM: msm: Add support for APQ8074 Dragonboard [not found] ` <50877C70-6066-4E87-9DEA-9F29D098525B-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org> @ 2013-09-26 20:58 ` David Brown [not found] ` <20130926205808.GA3146-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org> 2013-09-26 21:10 ` Rob Herring 1 sibling, 1 reply; 13+ messages in thread From: David Brown @ 2013-09-26 20:58 UTC (permalink / raw) To: Kumar Gala Cc: Rohit Vaswani, Rob Herring, Pawel Moll, Mark Rutland, Stephen Warren, Ian Campbell, Russell King, Daniel Walker, Bryan Huntsman, devicetree-u79uwXL29TY76Z2rM5mHXA, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, linux-kernel-u79uwXL29TY76Z2rM5mHXA, linux-arm-msm-u79uwXL29TY76Z2rM5mHXA On Thu, Sep 26, 2013 at 02:33:53PM -0500, Kumar Gala wrote: >> "ePAPR 1.1 section 2.2.1.1 "Node Name Requirements" specifies that any >> node that has a reg property must include a unit address in its name >> with value matching the first entry in its reg property. Conversely, if >> a node does not have a reg property, the node name must not include a >> unit address." >> >> The soc node we have does not have a reg property ? > >Not 100% sure what people will decide on this. There are a number of >examples on the PPC side (arch/powerpc/boot/dts) that are soc@ADDR, >but they don't typically have "reg" properties at the soc level. > >Let's go ahead w/o the unit address (as you have it) for now. What is the address even supposed to mean? Are we expecting multiple 'soc' nodes? David -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 13+ messages in thread
[parent not found: <20130926205808.GA3146-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>]
* Re: [PATCHv4 2/3] ARM: msm: Add support for APQ8074 Dragonboard [not found] ` <20130926205808.GA3146-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org> @ 2013-09-26 21:06 ` Kumar Gala 0 siblings, 0 replies; 13+ messages in thread From: Kumar Gala @ 2013-09-26 21:06 UTC (permalink / raw) To: David Brown Cc: Rohit Vaswani, Rob Herring, Pawel Moll, Mark Rutland, Stephen Warren, Ian Campbell, Russell King, Daniel Walker, Bryan Huntsman, devicetree-u79uwXL29TY76Z2rM5mHXA, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, linux-kernel-u79uwXL29TY76Z2rM5mHXA, linux-arm-msm-u79uwXL29TY76Z2rM5mHXA On Sep 26, 2013, at 3:58 PM, David Brown wrote: > On Thu, Sep 26, 2013 at 02:33:53PM -0500, Kumar Gala wrote: > >>> "ePAPR 1.1 section 2.2.1.1 "Node Name Requirements" specifies that any >>> node that has a reg property must include a unit address in its name >>> with value matching the first entry in its reg property. Conversely, if >>> a node does not have a reg property, the node name must not include a >>> unit address." >>> >>> The soc node we have does not have a reg property ? >> >> Not 100% sure what people will decide on this. There are a number of >> examples on the PPC side (arch/powerpc/boot/dts) that are soc@ADDR, >> but they don't typically have "reg" properties at the soc level. >> >> Let's go ahead w/o the unit address (as you have it) for now. > > What is the address even supposed to mean? Are we expecting multiple > 'soc' nodes? What do we consider to exist under soc in general? I'd expect the address to be the base of the MMIO register register for on SoC devices (but that's based on my PPC history). - k -- Employee of Qualcomm Innovation Center, Inc. Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [PATCHv4 2/3] ARM: msm: Add support for APQ8074 Dragonboard [not found] ` <50877C70-6066-4E87-9DEA-9F29D098525B-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org> 2013-09-26 20:58 ` David Brown @ 2013-09-26 21:10 ` Rob Herring [not found] ` <5244A2AA.6050901-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> 1 sibling, 1 reply; 13+ messages in thread From: Rob Herring @ 2013-09-26 21:10 UTC (permalink / raw) To: Kumar Gala Cc: Rohit Vaswani, David Brown, Rob Herring, Pawel Moll, Mark Rutland, Stephen Warren, Ian Campbell, Russell King, Daniel Walker, Bryan Huntsman, devicetree-u79uwXL29TY76Z2rM5mHXA, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, linux-kernel-u79uwXL29TY76Z2rM5mHXA, linux-arm-msm-u79uwXL29TY76Z2rM5mHXA On 09/26/2013 02:33 PM, Kumar Gala wrote: > > On Sep 26, 2013, at 2:17 PM, Rohit Vaswani wrote: > >> On 9/26/2013 11:05 AM, Rohit Vaswani wrote: >>> On 9/26/2013 9:37 AM, Kumar Gala wrote: >>>> <snip> >>> >>>> +++ b/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts @@ -0,0 >>>> +1,6 @@ +/include/ "qcom-msm8974.dtsi" + +/ { + model = >>>> "Qualcomm APQ8074 Dragonboard"; + compatible = >>>> "qcom,apq8074-dragonboard", "qcom,apq8074"; +}; diff --git >>>> a/arch/arm/boot/dts/qcom-msm8974.dtsi >>>> b/arch/arm/boot/dts/qcom-msm8974.dtsi new file mode 100644 >>>> index 0000000..f04b643 --- /dev/null +++ >>>> b/arch/arm/boot/dts/qcom-msm8974.dtsi @@ -0,0 +1,35 @@ >>>> +/dts-v1/; + +/include/ "skeleton.dtsi" + +/ { + model = >>>> "Qualcomm MSM8974"; + compatible = "qcom,msm8974"; + >>>> interrupt-parent = <&intc>; + + soc: soc { }; >>>>>> We should have a unit address here: >>>>>> >>>>>> soc: soc@FOOBAR { >>>>>> >>>>>> also, split out the curly braces so any future patches do >>>>>> have to muck with that. >>>>>> >>>>>> }; >>>>>> >>>>> Im not sure I understand the reasoning behind the unit >>>>> address for soc ? >>>> Its fairly standard practice and there is a fair amount of >>>> discussion about the lack of a unit address for memory nodes. >>>> >>> That still doesn't really answer anything :) - and I couldn't >>> find any discussions about this either. I don't see anybody in >>> upstream adding an address to soc except sun. What is that >>> address supposed to be for - what does it mean ? The soc is way >>> of encapsulating meaningful blocks for the particular SoC. >> >> I see the mail from Stephen Warren for adding a check stating that >> >> "ePAPR 1.1 section 2.2.1.1 "Node Name Requirements" specifies that >> any node that has a reg property must include a unit address in its >> name with value matching the first entry in its reg property. >> Conversely, if a node does not have a reg property, the node name >> must not include a unit address." >> >> The soc node we have does not have a reg property ? > > Not 100% sure what people will decide on this. There are a number of > examples on the PPC side (arch/powerpc/boot/dts) that are soc@ADDR, > but they don't typically have "reg" properties at the soc level. No, but you may have a ranges property which is related. I've just hit this on highbank in needing to add a second bank of peripherals for midway. So my vote would be to have unit address. Rob -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 13+ messages in thread
[parent not found: <5244A2AA.6050901-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>]
* Re: [PATCHv4 2/3] ARM: msm: Add support for APQ8074 Dragonboard [not found] ` <5244A2AA.6050901-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> @ 2013-09-26 21:23 ` Kumar Gala 0 siblings, 0 replies; 13+ messages in thread From: Kumar Gala @ 2013-09-26 21:23 UTC (permalink / raw) To: Rob Herring Cc: Rohit Vaswani, David Brown, Rob Herring, Pawel Moll, Mark Rutland, Stephen Warren, Ian Campbell, Russell King, Daniel Walker, Bryan Huntsman, devicetree-u79uwXL29TY76Z2rM5mHXA, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, linux-kernel-u79uwXL29TY76Z2rM5mHXA, linux-arm-msm-u79uwXL29TY76Z2rM5mHXA On Sep 26, 2013, at 4:10 PM, Rob Herring wrote: > On 09/26/2013 02:33 PM, Kumar Gala wrote: >> >> On Sep 26, 2013, at 2:17 PM, Rohit Vaswani wrote: >> >>> On 9/26/2013 11:05 AM, Rohit Vaswani wrote: >>>> On 9/26/2013 9:37 AM, Kumar Gala wrote: >>>>> <snip> >>>> >>>>> +++ b/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts @@ -0,0 >>>>> +1,6 @@ +/include/ "qcom-msm8974.dtsi" + +/ { + model = >>>>> "Qualcomm APQ8074 Dragonboard"; + compatible = >>>>> "qcom,apq8074-dragonboard", "qcom,apq8074"; +}; diff --git >>>>> a/arch/arm/boot/dts/qcom-msm8974.dtsi >>>>> b/arch/arm/boot/dts/qcom-msm8974.dtsi new file mode 100644 >>>>> index 0000000..f04b643 --- /dev/null +++ >>>>> b/arch/arm/boot/dts/qcom-msm8974.dtsi @@ -0,0 +1,35 @@ >>>>> +/dts-v1/; + +/include/ "skeleton.dtsi" + +/ { + model = >>>>> "Qualcomm MSM8974"; + compatible = "qcom,msm8974"; + >>>>> interrupt-parent = <&intc>; + + soc: soc { }; >>>>>>> We should have a unit address here: >>>>>>> >>>>>>> soc: soc@FOOBAR { >>>>>>> >>>>>>> also, split out the curly braces so any future patches do >>>>>>> have to muck with that. >>>>>>> >>>>>>> }; >>>>>>> >>>>>> Im not sure I understand the reasoning behind the unit >>>>>> address for soc ? >>>>> Its fairly standard practice and there is a fair amount of >>>>> discussion about the lack of a unit address for memory nodes. >>>>> >>>> That still doesn't really answer anything :) - and I couldn't >>>> find any discussions about this either. I don't see anybody in >>>> upstream adding an address to soc except sun. What is that >>>> address supposed to be for - what does it mean ? The soc is way >>>> of encapsulating meaningful blocks for the particular SoC. >>> >>> I see the mail from Stephen Warren for adding a check stating that >>> >>> "ePAPR 1.1 section 2.2.1.1 "Node Name Requirements" specifies that >>> any node that has a reg property must include a unit address in its >>> name with value matching the first entry in its reg property. >>> Conversely, if a node does not have a reg property, the node name >>> must not include a unit address." >>> >>> The soc node we have does not have a reg property ? >> >> Not 100% sure what people will decide on this. There are a number of >> examples on the PPC side (arch/powerpc/boot/dts) that are soc@ADDR, >> but they don't typically have "reg" properties at the soc level. > > No, but you may have a ranges property which is related. > > I've just hit this on highbank in needing to add a second bank of > peripherals for midway. So my vote would be to have unit address. > > Rob So are we saying the rule for needing a unit-address being either 'reg' or 'ranges' ? - k -- Employee of Qualcomm Innovation Center, Inc. Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 13+ messages in thread
* [PATCH 3/3] defconfig: msm_defconfig: Enable CONFIG_ARCH_MSM8974 2013-09-24 3:13 (unknown), Rohit Vaswani [not found] ` <1379992406-3541-1-git-send-email-rvaswani-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org> @ 2013-09-24 3:13 ` Rohit Vaswani 1 sibling, 0 replies; 13+ messages in thread From: Rohit Vaswani @ 2013-09-24 3:13 UTC (permalink / raw) To: David Brown Cc: Rohit Vaswani, Stephen Boyd, Russell King, Arnd Bergmann, linux-arm-kernel, linux-arm-msm This patch enables MSM8974 build support. Signed-off-by: Rohit Vaswani <rvaswani@codeaurora.org> --- arch/arm/configs/msm_defconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/configs/msm_defconfig b/arch/arm/configs/msm_defconfig index 690b5f9..0ed32e5 100644 --- a/arch/arm/configs/msm_defconfig +++ b/arch/arm/configs/msm_defconfig @@ -20,6 +20,7 @@ CONFIG_PARTITION_ADVANCED=y CONFIG_ARCH_MSM=y CONFIG_ARCH_MSM8X60=y CONFIG_ARCH_MSM8960=y +CONFIG_ARCH_MSM8974=y CONFIG_SMP=y CONFIG_PREEMPT=y CONFIG_AEABI=y -- The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, hosted by The Linux Foundation ^ permalink raw reply related [flat|nested] 13+ messages in thread
end of thread, other threads:[~2013-09-26 21:23 UTC | newest]
Thread overview: 13+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-09-24 3:13 (unknown), Rohit Vaswani
[not found] ` <1379992406-3541-1-git-send-email-rvaswani-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2013-09-24 3:13 ` [PATCHv4 2/3] ARM: msm: Add support for APQ8074 Dragonboard Rohit Vaswani
2013-09-25 19:49 ` Kumar Gala
[not found] ` <4E7868D6-56CB-4AF8-8EBF-069966899C23-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2013-09-25 22:35 ` Rohit Vaswani
[not found] ` <5243652F.7090408-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2013-09-26 16:37 ` Kumar Gala
2013-09-26 18:05 ` Rohit Vaswani
[not found] ` <52447779.3010908-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2013-09-26 19:17 ` Rohit Vaswani
[not found] ` <52448852.9050608-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2013-09-26 19:33 ` Kumar Gala
[not found] ` <50877C70-6066-4E87-9DEA-9F29D098525B-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2013-09-26 20:58 ` David Brown
[not found] ` <20130926205808.GA3146-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2013-09-26 21:06 ` Kumar Gala
2013-09-26 21:10 ` Rob Herring
[not found] ` <5244A2AA.6050901-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2013-09-26 21:23 ` Kumar Gala
2013-09-24 3:13 ` [PATCH 3/3] defconfig: msm_defconfig: Enable CONFIG_ARCH_MSM8974 Rohit Vaswani
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).