Linux ARM-MSM sub-architecture
 help / color / mirror / Atom feed
From: Abhinav Kumar <quic_abhinavk@quicinc.com>
To: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>,
	<abhinavk@codeaurora.org>
Cc: freedreno <freedreno@lists.freedesktop.org>,
	Jonathan Marek <jonathan@marek.ca>,
	Stephen Boyd <sboyd@kernel.org>,
	"open list:DRM DRIVER FOR MSM ADRENO GPU" 
	<linux-arm-msm@vger.kernel.org>,
	"open list:DRM DRIVER FOR MSM ADRENO GPU" 
	<dri-devel@lists.freedesktop.org>,
	Bjorn Andersson <bjorn.andersson@linaro.org>,
	David Airlie <airlied@linux.ie>, Sean Paul <sean@poorly.run>
Subject: Re: [Freedreno] [PATCH 2/2] drm/msm/hdmi: switch to drm_bridge_connector
Date: Mon, 6 Dec 2021 12:42:36 -0800	[thread overview]
Message-ID: <2b2194b3-90ef-c3f2-9cfe-1e7f6df42733@quicinc.com> (raw)
In-Reply-To: <1df4eff7-b90e-39e5-d158-15380e6c9324@linaro.org>



On 11/25/2021 4:50 AM, Dmitry Baryshkov wrote:
> On 19/10/2021 02:54, abhinavk@codeaurora.org wrote:
>> On 2021-10-16 07:21, Dmitry Baryshkov wrote:
>>> On Sat, 16 Oct 2021 at 01:25, <abhinavk@codeaurora.org> wrote:
>>>>
>>>> Hi Dmitry
>>>>
>>>> On 2021-10-14 17:11, Dmitry Baryshkov wrote:
>>>> > Merge old hdmi_bridge and hdmi_connector implementations. Use
>>>> > drm_bridge_connector instead.
>>>> >
>>>> Can you please comment on the validation done on this change?
>>>> Has basic bootup been verified on db820c as thats the only platform
>>>> which shall use this.
>>>
>>> Yes, this has been developed and validated on db820c
>> Thanks for confirming.
>>>
>>>>
>>>> > Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
>>>> > ---
>>>> >  drivers/gpu/drm/msm/Makefile                  |   2 +-
>>>> >  drivers/gpu/drm/msm/hdmi/hdmi.c               |  12 +-
>>>> >  drivers/gpu/drm/msm/hdmi/hdmi.h               |  19 ++-
>>>> >  drivers/gpu/drm/msm/hdmi/hdmi_bridge.c        |  81 ++++++++-
>>>> >  .../msm/hdmi/{hdmi_connector.c => hdmi_hpd.c} | 154 
>>>> ++----------------
>>>> >  5 files changed, 109 insertions(+), 159 deletions(-)
>>>> >  rename drivers/gpu/drm/msm/hdmi/{hdmi_connector.c => hdmi_hpd.c} 
>>>> (62%)
>>>> >
>>>> > diff --git a/drivers/gpu/drm/msm/Makefile
>>>> > b/drivers/gpu/drm/msm/Makefile
>>>> > index 904535eda0c4..91b09cda8a9c 100644
>>>> > --- a/drivers/gpu/drm/msm/Makefile
>>>> > +++ b/drivers/gpu/drm/msm/Makefile
>>>> > @@ -19,7 +19,7 @@ msm-y := \
>>>> >       hdmi/hdmi.o \
>>>> >       hdmi/hdmi_audio.o \
>>>> >       hdmi/hdmi_bridge.o \
>>>> > -     hdmi/hdmi_connector.o \
>>>> > +     hdmi/hdmi_hpd.o \
>>>> >       hdmi/hdmi_i2c.o \
>>>> >       hdmi/hdmi_phy.o \
>>>> >       hdmi/hdmi_phy_8960.o \
>>>> > diff --git a/drivers/gpu/drm/msm/hdmi/hdmi.c
>>>> > b/drivers/gpu/drm/msm/hdmi/hdmi.c
>>>> > index db17a000d968..d1cf4df7188c 100644
>>>> > --- a/drivers/gpu/drm/msm/hdmi/hdmi.c
>>>> > +++ b/drivers/gpu/drm/msm/hdmi/hdmi.c
>>>> > @@ -8,6 +8,8 @@
>>>> >  #include <linux/of_irq.h>
>>>> >  #include <linux/of_gpio.h>
>>>> >
>>>> > +#include <drm/drm_bridge_connector.h>
>>>> > +
>>>> >  #include <sound/hdmi-codec.h>
>>>> >  #include "hdmi.h"
>>>> >
>>>> > @@ -41,7 +43,7 @@ static irqreturn_t msm_hdmi_irq(int irq, void
>>>> > *dev_id)
>>>> >       struct hdmi *hdmi = dev_id;
>>>> >
>>>> >       /* Process HPD: */
>>>> > -     msm_hdmi_connector_irq(hdmi->connector);
>>>> > +     msm_hdmi_hpd_irq(hdmi->bridge);
>>>> >
>>>> >       /* Process DDC: */
>>>> >       msm_hdmi_i2c_irq(hdmi->i2c);
>>>> > @@ -283,7 +285,7 @@ int msm_hdmi_modeset_init(struct hdmi *hdmi,
>>>> >               goto fail;
>>>> >       }
>>>> >
>>>> > -     hdmi->connector = msm_hdmi_connector_init(hdmi);
>>>> > +     hdmi->connector = drm_bridge_connector_init(hdmi->dev, 
>>>> encoder);
>>>> >       if (IS_ERR(hdmi->connector)) {
>>>> >               ret = PTR_ERR(hdmi->connector);
>>>> >               DRM_DEV_ERROR(dev->dev, "failed to create HDMI 
>>>> connector: %d\n",
>>>> > ret);
>>>> > @@ -291,6 +293,8 @@ int msm_hdmi_modeset_init(struct hdmi *hdmi,
>>>> >               goto fail;
>>>> >       }
>>>> >
>>>> > +     drm_connector_attach_encoder(hdmi->connector, hdmi->encoder);
>>>> > +
>>>> >       hdmi->irq = irq_of_parse_and_map(pdev->dev.of_node, 0);
>>>> >       if (hdmi->irq < 0) {
>>>> >               ret = hdmi->irq;
>>>> > @@ -307,7 +311,9 @@ int msm_hdmi_modeset_init(struct hdmi *hdmi,
>>>> >               goto fail;
>>>> >       }
>>>> >
>>>> > -     ret = msm_hdmi_hpd_enable(hdmi->connector);
>>>> > +     drm_bridge_connector_enable_hpd(hdmi->connector);
>>>> > +
>>>> > +     ret = msm_hdmi_hpd_enable(hdmi->bridge);
>>>> >       if (ret < 0) {
>>>> >               DRM_DEV_ERROR(&hdmi->pdev->dev, "failed to enable 
>>>> HPD: %d\n", ret);
>>>> >               goto fail;
>>>> > diff --git a/drivers/gpu/drm/msm/hdmi/hdmi.h
>>>> > b/drivers/gpu/drm/msm/hdmi/hdmi.h
>>>> > index 82261078c6b1..736f348befb3 100644
>>>> > --- a/drivers/gpu/drm/msm/hdmi/hdmi.h
>>>> > +++ b/drivers/gpu/drm/msm/hdmi/hdmi.h
>>>> > @@ -114,6 +114,13 @@ struct hdmi_platform_config {
>>>> >       struct hdmi_gpio_data gpios[HDMI_MAX_NUM_GPIO];
>>>> >  };
>>>> >
>>>> > +struct hdmi_bridge {
>>>> > +     struct drm_bridge base;
>>>> > +     struct hdmi *hdmi;
>>>> > +     struct work_struct hpd_work;
>>>> > +};
>>>> > +#define to_hdmi_bridge(x) container_of(x, struct hdmi_bridge, base)
>>>> > +
>>>> >  void msm_hdmi_set_mode(struct hdmi *hdmi, bool power_on);
>>>> >
>>>> >  static inline void hdmi_write(struct hdmi *hdmi, u32 reg, u32 data)
>>>> > @@ -230,13 +237,11 @@ void msm_hdmi_audio_set_sample_rate(struct hdmi
>>>> > *hdmi, int rate);
>>>> >  struct drm_bridge *msm_hdmi_bridge_init(struct hdmi *hdmi);
>>>> >  void msm_hdmi_bridge_destroy(struct drm_bridge *bridge);
>>>> >
>>>> > -/*
>>>> > - * hdmi connector:
>>>> > - */
>>>> > -
>>>> > -void msm_hdmi_connector_irq(struct drm_connector *connector);
>>>> > -struct drm_connector *msm_hdmi_connector_init(struct hdmi *hdmi);
>>>> > -int msm_hdmi_hpd_enable(struct drm_connector *connector);
>>>> > +void msm_hdmi_hpd_irq(struct drm_bridge *bridge);
>>>> > +enum drm_connector_status msm_hdmi_bridge_detect(
>>>> > +             struct drm_bridge *bridge);
>>>> > +int msm_hdmi_hpd_enable(struct drm_bridge *bridge);
>>>> > +void msm_hdmi_hpd_disable(struct hdmi_bridge *hdmi_bridge);
>>>> >
>>>> >  /*
>>>> >   * i2c adapter for ddc:
>>>> > diff --git a/drivers/gpu/drm/msm/hdmi/hdmi_bridge.c
>>>> > b/drivers/gpu/drm/msm/hdmi/hdmi_bridge.c
>>>> > index f04eb4a70f0d..211b73dddf65 100644
>>>> > --- a/drivers/gpu/drm/msm/hdmi/hdmi_bridge.c
>>>> > +++ b/drivers/gpu/drm/msm/hdmi/hdmi_bridge.c
>>>> > @@ -5,17 +5,16 @@
>>>> >   */
>>>> >
>>>> >  #include <linux/delay.h>
>>>> > +#include <drm/drm_bridge_connector.h>
>>>> >
>>>> > +#include "msm_kms.h"
>>>> >  #include "hdmi.h"
>>>> >
>>>> > -struct hdmi_bridge {
>>>> > -     struct drm_bridge base;
>>>> > -     struct hdmi *hdmi;
>>>> > -};
>>>> > -#define to_hdmi_bridge(x) container_of(x, struct hdmi_bridge, base)
>>>> > -
>>>> >  void msm_hdmi_bridge_destroy(struct drm_bridge *bridge)
>>>> >  {
>>>> > +     struct hdmi_bridge *hdmi_bridge = to_hdmi_bridge(bridge);
>>>> > +
>>>> > +     msm_hdmi_hpd_disable(hdmi_bridge);
>>>> >  }
>>>> >
>>>> >  static void msm_hdmi_power_on(struct drm_bridge *bridge)
>>>> > @@ -251,14 +250,76 @@ static void msm_hdmi_bridge_mode_set(struct
>>>> > drm_bridge *bridge,
>>>> >               msm_hdmi_audio_update(hdmi);
>>>> >  }
>>>> >
>>>> > +static struct edid *msm_hdmi_bridge_get_edid(struct drm_bridge
>>>> > *bridge,
>>>> > +             struct drm_connector *connector)
>>>> > +{
>>>> > +     struct hdmi_bridge *hdmi_bridge = to_hdmi_bridge(bridge);
>>>> > +     struct hdmi *hdmi = hdmi_bridge->hdmi;
>>>> > +     struct edid *edid;
>>>> > +     uint32_t hdmi_ctrl;
>>>> > +
>>>> > +     hdmi_ctrl = hdmi_read(hdmi, REG_HDMI_CTRL);
>>>> > +     hdmi_write(hdmi, REG_HDMI_CTRL, hdmi_ctrl | HDMI_CTRL_ENABLE);
>>>> > +
>>>> > +     edid = drm_get_edid(connector, hdmi->i2c);
>>>> > +
>>>> > +     hdmi_write(hdmi, REG_HDMI_CTRL, hdmi_ctrl);
>>>> > +
>>>> > +     hdmi->hdmi_mode = drm_detect_hdmi_monitor(edid);
>>>> > +
>>>> > +     return edid;
>>>> > +}
>>>> > +
>>>> > +static enum drm_mode_status msm_hdmi_bridge_mode_valid(struct
>>>> > drm_bridge *bridge,
>>>> > +             const struct drm_display_info *info,
>>>> > +             const struct drm_display_mode *mode)
>>>> > +{
>>>> > +     struct hdmi_bridge *hdmi_bridge = to_hdmi_bridge(bridge);
>>>> > +     struct hdmi *hdmi = hdmi_bridge->hdmi;
>>>> > +     const struct hdmi_platform_config *config = hdmi->config;
>>>> > +     struct msm_drm_private *priv = bridge->dev->dev_private;
>>>> > +     struct msm_kms *kms = priv->kms;
>>>> > +     long actual, requested;
>>>> > +
>>>> > +     requested = 1000 * mode->clock;
>>>> > +     actual = kms->funcs->round_pixclk(kms,
>>>> > +                     requested, hdmi_bridge->hdmi->encoder);
>>>> > +
>>>> > +     /* for mdp5/apq8074, we manage our own pixel clk (as opposed to
>>>> > +      * mdp4/dtv stuff where pixel clk is assigned to mdp/encoder
>>>> > +      * instead):
>>>> > +      */
>>>> > +     if (config->pwr_clk_cnt > 0)
>>>> > +             actual = clk_round_rate(hdmi->pwr_clks[0], actual);
>>>> > +
>>>> > +     DBG("requested=%ld, actual=%ld", requested, actual);
>>>> > +
>>>> > +     if (actual != requested)
>>>> > +             return MODE_CLOCK_RANGE;
>>>> > +
>>>> > +     return 0;
>>>> > +}
>>>> > +
>>>> >  static const struct drm_bridge_funcs msm_hdmi_bridge_funcs = {
>>>> >               .pre_enable = msm_hdmi_bridge_pre_enable,
>>>> >               .enable = msm_hdmi_bridge_enable,
>>>> >               .disable = msm_hdmi_bridge_disable,
>>>> >               .post_disable = msm_hdmi_bridge_post_disable,
>>>> >               .mode_set = msm_hdmi_bridge_mode_set,
>>>> > +             .mode_valid = msm_hdmi_bridge_mode_valid,
>>>> > +             .get_edid = msm_hdmi_bridge_get_edid,
>>>> > +             .detect = msm_hdmi_bridge_detect,
>>>> >  };
>>>> >
>>>> > +static void
>>>> > +msm_hdmi_hotplug_work(struct work_struct *work)
>>>> > +{
>>>> > +     struct hdmi_bridge *hdmi_bridge =
>>>> > +             container_of(work, struct hdmi_bridge, hpd_work);
>>>> > +     struct drm_bridge *bridge = &hdmi_bridge->base;
>>>> > +
>>>> > +     drm_bridge_hpd_notify(bridge, drm_bridge_detect(bridge));
>>>> > +}
>>>> >
>>>> >  /* initialize bridge */
>>>> >  struct drm_bridge *msm_hdmi_bridge_init(struct hdmi *hdmi)
>>>> > @@ -275,11 +336,17 @@ struct drm_bridge *msm_hdmi_bridge_init(struct
>>>> > hdmi *hdmi)
>>>> >       }
>>>> >
>>>> >       hdmi_bridge->hdmi = hdmi;
>>>> > +     INIT_WORK(&hdmi_bridge->hpd_work, msm_hdmi_hotplug_work);
>>>> >
>>>> >       bridge = &hdmi_bridge->base;
>>>> >       bridge->funcs = &msm_hdmi_bridge_funcs;
>>>> > +     bridge->ddc = hdmi->i2c;
>>>> > +     bridge->type = DRM_MODE_CONNECTOR_HDMIA;
>>>> > +     bridge->ops = DRM_BRIDGE_OP_HPD |
>>>> > +             DRM_BRIDGE_OP_DETECT |
>>>> > +             DRM_BRIDGE_OP_EDID;
>> Please correct me if wrong here. When we set DRM_BRIDGE_OP_HPD, it 
>> means we need to
>> set the hpd_enable and hpd_disable callbacks. I am not seeing those 
>> being set.
>>
>> 707      * @DRM_BRIDGE_OP_HPD: The bridge can detect hot-plug and 
>> hot-unplug
>> 708      * without requiring polling. Bridges that set this flag shall
>> 709      * implement the &drm_bridge_funcs->hpd_enable and
>> 710      * &drm_bridge_funcs->hpd_disable callbacks if they support 
>> enabling
>> 711      * and disabling hot-plug detection dynamically.
>> 712      */
>> 713     DRM_BRIDGE_OP_HPD = BIT(2),
>>
>> So when drm_bridge_connector_enable_hpd() is called, its a no-op as 
>> hpd_enable() callback
>> is not set.
>>
>> msm_hdmi_hpd_enable() actually enables the HPD logic which is getting 
>> called from msm_hdmi_modeset_init()
>> and not from hpd_enable().
>>
>> In that case, do we need to set DRM_BRIDGE_OP_HPD for this? If we 
>> dont, what will happen?
>>
> 
> Without this flag, the drm_bridge_connector will not know that this 
> bridge is capable of generating HPD events on its own, ending up with 
> polling implementation. See drm_bridge_connector_init(), 
> drm_helper_hpd_irq_event(), etc.
> 

Thanks for the details. Then, as per the documentation on the 
DRM_BRIDGE_OP_HPD, shouldnt we also assign msm_hdmi_hpd_enable to 
hpd_enable callback? Since we are already calling 
drm_bridge_connector_enable_hpd(), that should take care of calling it
using the callback then.

Similarly, you can assign msm_hdmi_hpd_disable to hpd_disable op and 
then call drm_bridge_connector_disable_hpd() in those places.

That way, functionality remains intact and we follow the documentation.

>>
>>
>>>> >
>>>> > -     ret = drm_bridge_attach(hdmi->encoder, bridge, NULL, 0);
>>>> > +     ret = drm_bridge_attach(hdmi->encoder, bridge, NULL,
>>>> > DRM_BRIDGE_ATTACH_NO_CONNECTOR);
>>>> >       if (ret)
>>>> >               goto fail;
>>>> >
>>>> > diff --git a/drivers/gpu/drm/msm/hdmi/hdmi_connector.c
>>>> > b/drivers/gpu/drm/msm/hdmi/hdmi_hpd.c
>>>> > similarity index 62%
>>>> > rename from drivers/gpu/drm/msm/hdmi/hdmi_connector.c
>>>> > rename to drivers/gpu/drm/msm/hdmi/hdmi_hpd.c
>>>> > index a7f729cdec7b..1cda7bf23b3b 100644
>>>> > --- a/drivers/gpu/drm/msm/hdmi/hdmi_connector.c
>>>> > +++ b/drivers/gpu/drm/msm/hdmi/hdmi_hpd.c
>>>> > @@ -11,13 +11,6 @@
>>>> >  #include "msm_kms.h"
>>>> >  #include "hdmi.h"
>>>> >
>>>> > -struct hdmi_connector {
>>>> > -     struct drm_connector base;
>>>> > -     struct hdmi *hdmi;
>>>> > -     struct work_struct hpd_work;
>>>> > -};
>>>> > -#define to_hdmi_connector(x) container_of(x, struct hdmi_connector,
>>>> > base)
>>>> > -
>>>> >  static void msm_hdmi_phy_reset(struct hdmi *hdmi)
>>>> >  {
>>>> >       unsigned int val;
>>>> > @@ -139,10 +132,10 @@ static void enable_hpd_clocks(struct hdmi 
>>>> *hdmi,
>>>> > bool enable)
>>>> >       }
>>>> >  }
>>>> >
>>>> > -int msm_hdmi_hpd_enable(struct drm_connector *connector)
>>>> > +int msm_hdmi_hpd_enable(struct drm_bridge *bridge)
>>>> >  {
>>>> > -     struct hdmi_connector *hdmi_connector = 
>>>> to_hdmi_connector(connector);
>>>> > -     struct hdmi *hdmi = hdmi_connector->hdmi;
>>>> > +     struct hdmi_bridge *hdmi_bridge = to_hdmi_bridge(bridge);
>>>> > +     struct hdmi *hdmi = hdmi_bridge->hdmi;
>>>> >       const struct hdmi_platform_config *config = hdmi->config;
>>>> >       struct device *dev = &hdmi->pdev->dev;
>>>> >       uint32_t hpd_ctrl;
>>>> > @@ -199,9 +192,9 @@ int msm_hdmi_hpd_enable(struct drm_connector
>>>> > *connector)
>>>> >       return ret;
>>>> >  }
>>>> >
>>>> > -static void hdp_disable(struct hdmi_connector *hdmi_connector)
>>>> > +void msm_hdmi_hpd_disable(struct hdmi_bridge *hdmi_bridge)
>>>> >  {
>>>> > -     struct hdmi *hdmi = hdmi_connector->hdmi;
>>>> > +     struct hdmi *hdmi = hdmi_bridge->hdmi;
>>>> >       const struct hdmi_platform_config *config = hdmi->config;
>>>> >       struct device *dev = &hdmi->pdev->dev;
>>>> >       int ret;
>>>> > @@ -227,19 +220,10 @@ static void hdp_disable(struct hdmi_connector
>>>> > *hdmi_connector)
>>>> >               dev_warn(dev, "failed to disable hpd regulator: 
>>>> %d\n", ret);
>>>> >  }
>>>> >
>>>> > -static void
>>>> > -msm_hdmi_hotplug_work(struct work_struct *work)
>>>> > -{
>>>> > -     struct hdmi_connector *hdmi_connector =
>>>> > -             container_of(work, struct hdmi_connector, hpd_work);
>>>> > -     struct drm_connector *connector = &hdmi_connector->base;
>>>> > -     drm_helper_hpd_irq_event(connector->dev);
>>>> > -}
>>>> > -
>>>> > -void msm_hdmi_connector_irq(struct drm_connector *connector)
>>>> > +void msm_hdmi_hpd_irq(struct drm_bridge *bridge)
>>>> >  {
>>>> > -     struct hdmi_connector *hdmi_connector = 
>>>> to_hdmi_connector(connector);
>>>> > -     struct hdmi *hdmi = hdmi_connector->hdmi;
>>>> > +     struct hdmi_bridge *hdmi_bridge = to_hdmi_bridge(bridge);
>>>> > +     struct hdmi *hdmi = hdmi_bridge->hdmi;
>>>> >       uint32_t hpd_int_status, hpd_int_ctrl;
>>>> >
>>>> >       /* Process HPD: */
>>>> > @@ -262,7 +246,7 @@ void msm_hdmi_connector_irq(struct drm_connector
>>>> > *connector)
>>>> >                       hpd_int_ctrl |= HDMI_HPD_INT_CTRL_INT_CONNECT;
>>>> >               hdmi_write(hdmi, REG_HDMI_HPD_INT_CTRL, hpd_int_ctrl);
>>>> >
>>>> > -             queue_work(hdmi->workq, &hdmi_connector->hpd_work);
>>>> > +             queue_work(hdmi->workq, &hdmi_bridge->hpd_work);
>>>> >       }
>>>> >  }
>>>> >
>>>> > @@ -293,11 +277,11 @@ static enum drm_connector_status
>>>> > detect_gpio(struct hdmi *hdmi)
>>>> >                       connector_status_disconnected;
>>>> >  }
>>>> >
>>>> > -static enum drm_connector_status hdmi_connector_detect(
>>>> > -             struct drm_connector *connector, bool force)
>>>> > +enum drm_connector_status msm_hdmi_bridge_detect(
>>>> > +             struct drm_bridge *bridge)
>>>> >  {
>>>> > -     struct hdmi_connector *hdmi_connector = 
>>>> to_hdmi_connector(connector);
>>>> > -     struct hdmi *hdmi = hdmi_connector->hdmi;
>>>> > +     struct hdmi_bridge *hdmi_bridge = to_hdmi_bridge(bridge);
>>>> > +     struct hdmi *hdmi = hdmi_bridge->hdmi;
>>>> >       const struct hdmi_platform_config *config = hdmi->config;
>>>> >       struct hdmi_gpio_data hpd_gpio = config->gpios[HPD_GPIO_INDEX];
>>>> >       enum drm_connector_status stat_gpio, stat_reg;
>>>> > @@ -331,115 +315,3 @@ static enum drm_connector_status
>>>> > hdmi_connector_detect(
>>>> >
>>>> >       return stat_gpio;
>>>> >  }
>>>> > -
>>>> > -static void hdmi_connector_destroy(struct drm_connector *connector)
>>>> > -{
>>>> > -     struct hdmi_connector *hdmi_connector = 
>>>> to_hdmi_connector(connector);
>>>> > -
>>>> > -     hdp_disable(hdmi_connector);
>>>> > -
>>>> > -     drm_connector_cleanup(connector);
>>>> > -
>>>> > -     kfree(hdmi_connector);
>>>> > -}
>>>> > -
>>>> > -static int msm_hdmi_connector_get_modes(struct drm_connector
>>>> > *connector)
>>>> > -{
>>>> > -     struct hdmi_connector *hdmi_connector = 
>>>> to_hdmi_connector(connector);
>>>> > -     struct hdmi *hdmi = hdmi_connector->hdmi;
>>>> > -     struct edid *edid;
>>>> > -     uint32_t hdmi_ctrl;
>>>> > -     int ret = 0;
>>>> > -
>>>> > -     hdmi_ctrl = hdmi_read(hdmi, REG_HDMI_CTRL);
>>>> > -     hdmi_write(hdmi, REG_HDMI_CTRL, hdmi_ctrl | HDMI_CTRL_ENABLE);
>>>> > -
>>>> > -     edid = drm_get_edid(connector, hdmi->i2c);
>>>> > -
>>>> > -     hdmi_write(hdmi, REG_HDMI_CTRL, hdmi_ctrl);
>>>> > -
>>>> > -     hdmi->hdmi_mode = drm_detect_hdmi_monitor(edid);
>>>> > -     drm_connector_update_edid_property(connector, edid);
>>>> > -
>>>> > -     if (edid) {
>>>> > -             ret = drm_add_edid_modes(connector, edid);
>>>> > -             kfree(edid);
>>>> > -     }
>>>> > -
>>>> > -     return ret;
>>>> > -}
>>>> > -
>>>> > -static int msm_hdmi_connector_mode_valid(struct drm_connector
>>>> > *connector,
>>>> > -                              struct drm_display_mode *mode)
>>>> > -{
>>>> > -     struct hdmi_connector *hdmi_connector = 
>>>> to_hdmi_connector(connector);
>>>> > -     struct hdmi *hdmi = hdmi_connector->hdmi;
>>>> > -     const struct hdmi_platform_config *config = hdmi->config;
>>>> > -     struct msm_drm_private *priv = connector->dev->dev_private;
>>>> > -     struct msm_kms *kms = priv->kms;
>>>> > -     long actual, requested;
>>>> > -
>>>> > -     requested = 1000 * mode->clock;
>>>> > -     actual = kms->funcs->round_pixclk(kms,
>>>> > -                     requested, hdmi_connector->hdmi->encoder);
>>>> > -
>>>> > -     /* for mdp5/apq8074, we manage our own pixel clk (as opposed to
>>>> > -      * mdp4/dtv stuff where pixel clk is assigned to mdp/encoder
>>>> > -      * instead):
>>>> > -      */
>>>> > -     if (config->pwr_clk_cnt > 0)
>>>> > -             actual = clk_round_rate(hdmi->pwr_clks[0], actual);
>>>> > -
>>>> > -     DBG("requested=%ld, actual=%ld", requested, actual);
>>>> > -
>>>> > -     if (actual != requested)
>>>> > -             return MODE_CLOCK_RANGE;
>>>> > -
>>>> > -     return 0;
>>>> > -}
>>>> > -
>>>> > -static const struct drm_connector_funcs hdmi_connector_funcs = {
>>>> > -     .detect = hdmi_connector_detect,
>>>> > -     .fill_modes = drm_helper_probe_single_connector_modes,
>>>> > -     .destroy = hdmi_connector_destroy,
>>>> > -     .reset = drm_atomic_helper_connector_reset,
>>>> > -     .atomic_duplicate_state =
>>>> > drm_atomic_helper_connector_duplicate_state,
>>>> > -     .atomic_destroy_state = 
>>>> drm_atomic_helper_connector_destroy_state,
>>>> > -};
>>>> > -
>>>> > -static const struct drm_connector_helper_funcs
>>>> > msm_hdmi_connector_helper_funcs = {
>>>> > -     .get_modes = msm_hdmi_connector_get_modes,
>>>> > -     .mode_valid = msm_hdmi_connector_mode_valid,
>>>> > -};
>>>> > -
>>>> > -/* initialize connector */
>>>> > -struct drm_connector *msm_hdmi_connector_init(struct hdmi *hdmi)
>>>> > -{
>>>> > -     struct drm_connector *connector = NULL;
>>>> > -     struct hdmi_connector *hdmi_connector;
>>>> > -
>>>> > -     hdmi_connector = kzalloc(sizeof(*hdmi_connector), GFP_KERNEL);
>>>> > -     if (!hdmi_connector)
>>>> > -             return ERR_PTR(-ENOMEM);
>>>> > -
>>>> > -     hdmi_connector->hdmi = hdmi;
>>>> > -     INIT_WORK(&hdmi_connector->hpd_work, msm_hdmi_hotplug_work);
>>>> > -
>>>> > -     connector = &hdmi_connector->base;
>>>> > -
>>>> > -     drm_connector_init_with_ddc(hdmi->dev, connector,
>>>> > -                                 &hdmi_connector_funcs,
>>>> > -                                 DRM_MODE_CONNECTOR_HDMIA,
>>>> > -                                 hdmi->i2c);
>>>> > -     drm_connector_helper_add(connector,
>>>> > &msm_hdmi_connector_helper_funcs);
>>>> > -
>>>> > -     connector->polled = DRM_CONNECTOR_POLL_CONNECT |
>>>> > -                     DRM_CONNECTOR_POLL_DISCONNECT;
>>>> > -
>>>> > -     connector->interlace_allowed = 0;
>>>> > -     connector->doublescan_allowed = 0;
>>>> > -
>>>> > -     drm_connector_attach_encoder(connector, hdmi->encoder);
>>>> > -
>>>> > -     return connector;
>>>> > -}
> 
> 

  reply	other threads:[~2021-12-06 20:42 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-10-15  0:10 [PATCH 1/2] drm/msm/hdmi: use bulk regulator API Dmitry Baryshkov
2021-10-15  0:11 ` [PATCH 2/2] drm/msm/hdmi: switch to drm_bridge_connector Dmitry Baryshkov
2021-10-15 22:25   ` [Freedreno] " abhinavk
2021-10-16 14:21     ` Dmitry Baryshkov
2021-10-18 23:54       ` abhinavk
2021-11-25 12:50         ` Dmitry Baryshkov
2021-12-06 20:42           ` Abhinav Kumar [this message]
2021-12-06 22:47             ` Dmitry Baryshkov
2021-12-06 22:58               ` Abhinav Kumar
2021-12-07  0:21                 ` Dmitry Baryshkov
2021-12-07  0:26                   ` Abhinav Kumar
2021-10-15 19:46 ` [PATCH 1/2] drm/msm/hdmi: use bulk regulator API Stephen Boyd
2021-10-15 22:16 ` [Freedreno] " abhinavk

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=2b2194b3-90ef-c3f2-9cfe-1e7f6df42733@quicinc.com \
    --to=quic_abhinavk@quicinc.com \
    --cc=abhinavk@codeaurora.org \
    --cc=airlied@linux.ie \
    --cc=bjorn.andersson@linaro.org \
    --cc=dmitry.baryshkov@linaro.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=freedreno@lists.freedesktop.org \
    --cc=jonathan@marek.ca \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=sboyd@kernel.org \
    --cc=sean@poorly.run \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox