Re: [net-next PATCH v5 6/9] dt-bindings: net: Document Qcom QCA807x PHY package

[Andrew Lunn <andrew@lunn.ch>]

> +  PHY package can be configured in 3 mode following this table:
> +
> +                First Serdes mode       Second Serdes mode
> +  Option 1      PSGMII for copper       Disabled
> +                ports 0-4
> +  Option 2      PSGMII for copper       1000BASE-X / 100BASE-FX
> +                ports 0-4
> +  Option 3      QSGMII for copper       SGMII for
> +                ports 0-3               copper port 4
> +
> +$ref: ethernet-phy-package.yaml#
> +
> +properties:
> +  compatible:
> +    const: qcom,qca807x-package
> +
> +  qcom,package-mode:
> +    enum:
> +      - qsgmii
> +      - psgmii

There are three modes listed above, yet only two values here? Please
describe how they related.

> +
> +  qcom,tx-driver-strength:
> +    description: set the TX Amplifier value in mv.
> +      If not defined, 600mw is set by default.

Looking at other bindings, it seems pretty normal to include the units
in the property name: qcom,tx-driver-strength-milliwatts.

   Andrew