Re: [PATCH v4 4/4] arm64: dts: qcom: Add Acer Aspire 1

[Konrad Dybcio <konrad.dybcio@linaro.org>]

On 6.04.2023 17:06, Nikita Travkin wrote:
> Acer Aspire 1 is a WoA laptop based on Snapdragon 7c gen1 platform.
> 
> The laptop design is similar to trogdor in the choice of primary
> components but the specifics on usage of those differ slightly.
> 
> Add the devicetree for the laptop with support for most of the
> hardware present.
> 
> Signed-off-by: Nikita Travkin <nikita@trvn.ru>
> ---
> Changed in v2:
>  - Various styling, ordering and node naming issues fixed. (Krzysztof)
> 
> Changed in v3:
>  - Kepp camcc on, wakeup on touchpad, minor style issues. (Konrad)
> ---
>  arch/arm64/boot/dts/qcom/Makefile             |   1 +
>  .../boot/dts/qcom/sc7180-acer-aspire1.dts     | 859 ++++++++++++++++++
>  2 files changed, 860 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/qcom/sc7180-acer-aspire1.dts
> 
> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
> index f6ff4024a60e..f0d92c47bc7f 100644
> --- a/arch/arm64/boot/dts/qcom/Makefile
> +++ b/arch/arm64/boot/dts/qcom/Makefile
> @@ -78,6 +78,7 @@ dtb-$(CONFIG_ARCH_QCOM)	+= sa8155p-adp.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= sa8295p-adp.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= sa8540p-ride.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= sa8775p-ride.dtb
> +dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-acer-aspire1.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-idp.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-coachz-r1.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-coachz-r1-lte.dtb
> diff --git a/arch/arm64/boot/dts/qcom/sc7180-acer-aspire1.dts b/arch/arm64/boot/dts/qcom/sc7180-acer-aspire1.dts
> new file mode 100644
> index 000000000000..b4161f1f21a7
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/sc7180-acer-aspire1.dts
> @@ -0,0 +1,859 @@
> +// SPDX-License-Identifier: BSD-3-Clause
> +
> +/dts-v1/;
> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
> +
> +#include "sc7180.dtsi"
> +
> +#include "pm6150.dtsi"
> +#include "pm6150l.dtsi"
> +
> +/delete-node/ &tz_mem;
> +/delete-node/ &ipa_fw_mem;
> +
> +/ {
> +	model = "Acer Aspire 1";
> +	compatible = "acer,aspire1", "qcom,sc7180";
> +	chassis-type = "laptop";
> +
> +	aliases {
> +		bluetooth0 = &bluetooth;
> +		hsuart0 = &uart3;
> +		serial0 = &uart8;
> +		wifi0 = &wifi;
> +	};
> +
> +	chosen {
> +		stdout-path = "serial0:115200n8";
> +	};
> +
> +	reserved-memory {
> +		zap_mem: zap-shader@80840000 {
> +			reg = <0 0x80840000 0 0x2000>;
Please use 0x0 consistently as you did below.

> +			no-map;
> +		};
> +
> +		venus_mem: venus@85b00000 {
> +			reg = <0 0x85b00000 0 0x500000>;
> +			no-map;
> +		};
> +
> +		mpss_mem: mpss@86000000 {
> +			reg = <0x0 0x86000000 0x0 0x2000000>;
> +			no-map;
> +		};
> +
> +		adsp_mem: adsp@8e400000 {
> +			reg = <0x0 0x8e400000 0x0 0x2800000>;
> +			no-map;
> +		};
> +
> +		wlan_mem: wlan@93900000 {
> +			reg = <0x0 0x93900000 0x0 0x200000>;
> +			no-map;
> +		};
> +	};
> +

[...]

> +	sdc1_default: sdc1-default-state {
> +		clk-pins {
> +			pins = "sdc1_clk";
> +			bias-disable;
> +			drive-strength = <16>;
drive-strength
bias-

Just like you have in all other nodes, please.

With that:

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>

Konrad
> +		};
> +
> +		cmd-pins {
> +			pins = "sdc1_cmd";
> +			bias-pull-up;
> +			drive-strength = <16>;
> +		};
> +
> +		data-pins {
> +			pins = "sdc1_data";
> +			bias-pull-up;
> +			drive-strength = <16>;
> +		};
> +
> +		rclk-pins {
> +			pins = "sdc1_rclk";
> +			bias-pull-down;
> +		};
> +	};
> +
> +	sdc1_sleep: sdc1-sleep-state {
> +		clk-pins {
> +			pins = "sdc1_clk";
> +			bias-disable;
> +			drive-strength = <2>;
> +		};
> +
> +		cmd-pins {
> +			pins = "sdc1_cmd";
> +			bias-pull-up;
> +			drive-strength = <2>;
> +		};
> +
> +		data-pins {
> +			pins = "sdc1_data";
> +			bias-pull-up;
> +			drive-strength = <2>;
> +		};
> +
> +		rclk-pins {
> +			pins = "sdc1_rclk";
> +			bias-pull-down;
> +		};
> +	};
> +
> +	ter_mi2s_active: ter-mi2s-active-state {
> +		pins = "gpio63", "gpio64", "gpio65";
> +		function = "mi2s_2";
> +	};
> +};