From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
To: Jimmy Chen <jinghung.chen3@hotmail.com>,
LKML <linux-kernel@vger.kernel.org>
Cc: swboyd@chromium.org, dianders@chromium.org,
Jimmy Chen <jinghung.chen43@yahoo.com>,
Andy Gross <agross@kernel.org>,
Bjorn Andersson <bjorn.andersson@linaro.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Rob Herring <robh+dt@kernel.org>,
devicetree@vger.kernel.org, linux-arm-msm@vger.kernel.org
Subject: Re: [PATCH] FROMLIST: arm64: dts: qcom: Add LTE SKUs for sc7280-villager family
Date: Thu, 30 Jun 2022 20:30:31 +0200 [thread overview]
Message-ID: <306aa2da-9393-2a01-63a4-e1c81fa85e39@linaro.org> (raw)
In-Reply-To: <SG2PR03MB5006F091C2016ADE8A9A208ECCBA9@SG2PR03MB5006.apcprd03.prod.outlook.com>
On 30/06/2022 08:26, Jimmy Chen wrote:
> From: Jimmy Chen <jinghung.chen43@yahoo.com>
>
> This adds LTE skus for villager device tree files.
>
> Signed-off-by: Jimmy Chen <jinghung.chen43@yahoo.com>
> Signed-off-by: Jimmy Chen <jinghung.chen3@hotmail.com>
Use one identity and fix the subject - it's corrupted.
> ---
>
> arch/arm64/boot/dts/qcom/Makefile | 3 +++
> .../arm64/boot/dts/qcom/sc7280-chrome-common.dtsi | 7 -------
> arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts | 1 +
> .../qcom/sc7280-herobrine-herobrine-r1-lte.dts | 14 ++++++++++++++
> .../boot/dts/qcom/sc7280-herobrine-lte-sku.dtsi | 15 +++++++++++++++
> .../dts/qcom/sc7280-herobrine-villager-r0-lte.dts | 14 ++++++++++++++
> .../dts/qcom/sc7280-herobrine-villager-r1-lte.dts | 14 ++++++++++++++
> arch/arm64/boot/dts/qcom/sc7280-idp.dtsi | 1 +
> 8 files changed, 62 insertions(+), 7 deletions(-)
> create mode 100644 arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r1-lte.dts
> create mode 100644 arch/arm64/boot/dts/qcom/sc7280-herobrine-lte-sku.dtsi
> create mode 100644 arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r0-lte.dts
> create mode 100644 arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1-lte.dts
>
> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
> index 2f8aec2cc6db6..ab1066883c468 100644
> --- a/arch/arm64/boot/dts/qcom/Makefile
> +++ b/arch/arm64/boot/dts/qcom/Makefile
> @@ -85,7 +85,10 @@ dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-r1.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-r1-lte.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-crd.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-herobrine-r1.dtb
> +dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-herobrine-r1-lte.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-villager-r0.dtb
> +dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-villager-r0-lte.dtb
> +dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-villager-r1-lte.dtb
This looks not aligned with other entries.
> dtb-$(CONFIG_ARCH_QCOM) += sc7280-idp.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sc7280-idp2.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sc7280-crd-r3.dtb
> diff --git a/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi b/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi
> index 9f4a9c263c351..b1f83ddb4e23a 100644
> --- a/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi
> @@ -83,13 +83,6 @@ spi_flash: flash@0 {
> };
> };
>
> -/* Modem setup is different on Chrome setups than typical Qualcomm setup */
> -&remoteproc_mpss {
> - status = "okay";
> - compatible = "qcom,sc7280-mss-pil";
> - iommus = <&apps_smmu 0x124 0x0>, <&apps_smmu 0x488 0x7>;
> - memory-region = <&mba_mem>, <&mpss_mem>;
> -};
>
> /* Increase the size from 2.5MB to 8MB */
> &rmtfs_mem {
> diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts
> index a4ac33c4fd59a..7aaba5e51af01 100644
> --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts
> +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts
> @@ -8,6 +8,7 @@
> /dts-v1/;
>
> #include "sc7280-herobrine.dtsi"
> +#include "sc7280-herobrine-lte-sku.dtsi"
>
> / {
> model = "Qualcomm Technologies, Inc. sc7280 CRD platform (rev5+)";
> diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r1-lte.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r1-lte.dts
> new file mode 100644
> index 0000000000000..e37773fd63b3b
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r1-lte.dts
> @@ -0,0 +1,14 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Google Herobrine board device tree source
> + *
> + * Copyright 2022 Google LLC.
> + */
> +
> +#include "sc7280-herobrine-villager-r0.dts"
> +#include "sc7280-herobrine-lte-sku.dtsi"
> +
> +/{
> + model = "Google Herobrine (rev1+) with LTE";
> + compatible = "google,herobrine-sku0", "qcom,sc7280";
DT bindings update is needed. Unless it is already part of some other
set, but then this should be explained in some cover letter.
> +};
> diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-lte-sku.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-lte-sku.dtsi
> new file mode 100644
> index 0000000000000..c628910b310d3
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-lte-sku.dtsi
> @@ -0,0 +1,15 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> + /*
> + * Google Herobrine dts fragment for LTE SKUs
> + *
> + * Copyright 2022 Google LLC.
> + */
> +/* Modem setup is different on Chrome setups than typical Qualcomm setup */
> +&remoteproc_mpss {
> + status = "okay";
> + compatible = "qcom,sc7280-mss-pil";
> + iommus = <&apps_smmu 0x124 0x0>, <&apps_smmu 0x488 0x7>;
> + memory-region = <&mba_mem>, <&mpss_mem>;
> + firmware-name = "qcom/sc7280-herobrine/modem/mba.mbn",
> + "qcom/sc7280-herobrine/modem/qdsp6sw.mbn";
> +};
> diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r0-lte.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r0-lte.dts
> new file mode 100644
> index 0000000000000..672cb78e3088f
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r0-lte.dts
> @@ -0,0 +1,14 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Google Villager board device tree source
> + *
> + * Copyright 2022 Google LLC.
> + */
> +
> +#include "sc7280-herobrine-villager-r0.dts"
> +#include "sc7280-herobrine-lte-sku.dtsi"
> +
> +/ {
> + model = "Google Villager (rev0) with LTE";
> + compatible = "google,villager-rev0-sku0", "qcom,sc7280";
> +};
> diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1-lte.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1-lte.dts
> new file mode 100644
> index 0000000000000..2f05a19cc388e
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1-lte.dts
> @@ -0,0 +1,14 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Google Villager board device tree source
> + *
> + * Copyright 2022 Google LLC.
> + */
> +
> +#include "sc7280-herobrine-villager-r1.dts"
> +#include "sc7280-herobrine-lte-sku.dtsi"
> +
> +/ {
> + model = "Google Villager (rev1+) with LTE";
> + compatible = "google,villager-sku0", "qcom,sc7280";
> +};
> diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
> index 5eb668991e249..6928a0908fcd6 100644
> --- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
> @@ -13,6 +13,7 @@
> #include "pmk8350.dtsi"
>
> #include "sc7280-chrome-common.dtsi"
> +#include "sc7280-herobrine-lte-sku.dtsi"
This looks like independent commit.
>
> / {
> aliases {
Best regards,
Krzysztof
prev parent reply other threads:[~2022-06-30 18:30 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-06-30 6:26 [PATCH] FROMLIST: arm64: dts: qcom: Add LTE SKUs for sc7280-villager family Jimmy Chen
2022-06-30 15:02 ` Doug Anderson
2022-06-30 18:30 ` Krzysztof Kozlowski [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=306aa2da-9393-2a01-63a4-e1c81fa85e39@linaro.org \
--to=krzysztof.kozlowski@linaro.org \
--cc=agross@kernel.org \
--cc=bjorn.andersson@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=dianders@chromium.org \
--cc=jinghung.chen3@hotmail.com \
--cc=jinghung.chen43@yahoo.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=swboyd@chromium.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox