Linux ARM-MSM sub-architecture
 help / color / mirror / Atom feed
From: Dikshita Agarwal <quic_dikshita@quicinc.com>
To: <neil.armstrong@linaro.org>, <quic_vgarodia@quicinc.com>,
	<quic_abhinavk@quicinc.com>, <mchehab@kernel.org>
Cc: <hverkuil@xs4all.nl>, <linux-media@vger.kernel.org>,
	<linux-arm-msm@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Subject: Re: [RFC PATCH 00/12] Add support for HEVC and VP9 codecs in decoder
Date: Thu, 6 Mar 2025 18:04:22 +0530	[thread overview]
Message-ID: <31cfacfc-fd69-d488-e2f7-7399bd5a680a@quicinc.com> (raw)
In-Reply-To: <6d88effc-2aed-4f92-89a7-17d48f43ccd3@linaro.org>



On 3/5/2025 7:52 PM, neil.armstrong@linaro.org wrote:
> Hi,
> 
> On 05/03/2025 11:43, Dikshita Agarwal wrote:
>> Hi all,
>>
>> This patch series adds initial support for the HEVC(H.265) and VP9
>> codecs in iris decoder. The objective of this work is to extend the
>> decoder's capabilities to handle HEVC and VP9 codec streams,
>> including necessary format handling and buffer management.
>> In addition, the series also includes a set of fixes to address issues
>> identified during testing of these additional codecs.
>>
>> I'm sharing this series as an RFC because compliance and conformance
>> testing are still in progress.
>> While initial functional tests show positive results, I would
>> appreciate early feedback on the design, implementation, and fixes
>> before moving to a formal submission.
>>
>> I plan to submit a formal patch series after completing all compliance
>> checks. Meanwhile, any feedback or suggestion to improve this work are
>> very welcome.
>>
>> Thanks,
>> Dikshita
>>
>> Dikshita Agarwal (12):
>>    media: iris: Add HEVC and VP9 formats for decoder
>>    media: iris: Add platform capabilities for HEVC and VP9 decoders
>>    media: iris: Set mandatory properties for HEVC and VP9 decoders.
>>    media: iris: Add internal buffer calculation for HEVC and VP9 decoders
>>    media: iris: Skip destroying internal buffer if not dequeued
>>    media: iris: Update CAPTURE format info based on OUTPUT format
>>    media: iris: Add handling for corrupt and drop frames
>>    media: iris: Avoid updating frame size to firmware during reconfig
>>    media: iris: Avoid sending LAST flag multiple times
>>    media: iris: Send V4L2_BUF_FLAG_ERROR for buffers with 0 filled length
>>    media: iris: Fix handling of eos buffer during drain
>>    media: iris: Add handling for no show frames
> 
> I should be better to move patches 1, 2 & 3 at the end, after the patches
> adding support for specific hecv & h265 features, and please check that
> none of the patches breaks h264 at any time to keep bisectability.
> 
Noted.

Thanks,
Dikshita
> Neil
> 
> Neil
> 
>>
>>   .../media/platform/qcom/iris/iris_buffer.c    |  22 +-
>>   drivers/media/platform/qcom/iris/iris_ctrls.c |  28 +-
>>   .../platform/qcom/iris/iris_hfi_common.h      |   1 +
>>   .../qcom/iris/iris_hfi_gen1_command.c         |  38 +-
>>   .../qcom/iris/iris_hfi_gen1_defines.h         |   4 +
>>   .../qcom/iris/iris_hfi_gen1_response.c        |  11 +
>>   .../qcom/iris/iris_hfi_gen2_command.c         | 129 +++++-
>>   .../qcom/iris/iris_hfi_gen2_defines.h         |   5 +
>>   .../qcom/iris/iris_hfi_gen2_response.c        |  56 ++-
>>   .../media/platform/qcom/iris/iris_instance.h  |   6 +
>>   .../platform/qcom/iris/iris_platform_common.h |  25 +-
>>   .../platform/qcom/iris/iris_platform_sm8250.c |   4 +-
>>   .../platform/qcom/iris/iris_platform_sm8550.c | 141 ++++++-
>>   drivers/media/platform/qcom/iris/iris_vb2.c   |   3 +-
>>   drivers/media/platform/qcom/iris/iris_vdec.c  |  80 +++-
>>   drivers/media/platform/qcom/iris/iris_vdec.h  |  11 +
>>   drivers/media/platform/qcom/iris/iris_vidc.c  |   3 -
>>   .../platform/qcom/iris/iris_vpu_buffer.c      | 397 +++++++++++++++++-
>>   .../platform/qcom/iris/iris_vpu_buffer.h      |  46 +-
>>   19 files changed, 931 insertions(+), 79 deletions(-)
>>
> 

      reply	other threads:[~2025-03-06 12:34 UTC|newest]

Thread overview: 32+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-03-05 10:43 [RFC PATCH 00/12] Add support for HEVC and VP9 codecs in decoder Dikshita Agarwal
2025-03-05 10:43 ` [RFC PATCH 01/12] media: iris: Add HEVC and VP9 formats for decoder Dikshita Agarwal
2025-03-06  0:17   ` Bryan O'Donoghue
2025-03-06 11:55     ` Dikshita Agarwal
2025-03-05 10:43 ` [RFC PATCH 02/12] media: iris: Add platform capabilities for HEVC and VP9 decoders Dikshita Agarwal
2025-03-06  0:28   ` Bryan O'Donoghue
2025-03-06 12:07     ` Dikshita Agarwal
2025-03-05 10:43 ` [RFC PATCH 03/12] media: iris: Set mandatory properties " Dikshita Agarwal
2025-03-05 14:00   ` neil.armstrong
2025-03-06 12:10     ` Dikshita Agarwal
2025-03-06  0:52   ` Bryan O'Donoghue
2025-03-06 12:16     ` Dikshita Agarwal
2025-03-05 10:43 ` [RFC PATCH 04/12] media: iris: Add internal buffer calculation " Dikshita Agarwal
2025-03-06  1:05   ` Bryan O'Donoghue
2025-03-06 12:26     ` Dikshita Agarwal
2025-03-05 10:43 ` [RFC PATCH 05/12] media: iris: Skip destroying internal buffer if not dequeued Dikshita Agarwal
2025-03-05 20:44   ` Dmitry Baryshkov
2025-03-06 12:26     ` Dikshita Agarwal
2025-03-05 10:43 ` [RFC PATCH 06/12] media: iris: Update CAPTURE format info based on OUTPUT format Dikshita Agarwal
2025-03-05 20:45   ` Dmitry Baryshkov
2025-03-06 12:27     ` Dikshita Agarwal
2025-03-05 10:43 ` [RFC PATCH 07/12] media: iris: Add handling for corrupt and drop frames Dikshita Agarwal
2025-03-06  1:12   ` Bryan O'Donoghue
2025-03-05 10:43 ` [RFC PATCH 08/12] media: iris: Avoid updating frame size to firmware during reconfig Dikshita Agarwal
2025-03-06  1:26   ` Bryan O'Donoghue
2025-03-06 12:32     ` Dikshita Agarwal
2025-03-05 10:43 ` [RFC PATCH 09/12] media: iris: Avoid sending LAST flag multiple times Dikshita Agarwal
2025-03-05 10:43 ` [RFC PATCH 10/12] media: iris: Send V4L2_BUF_FLAG_ERROR for buffers with 0 filled length Dikshita Agarwal
2025-03-05 10:43 ` [RFC PATCH 11/12] media: iris: Fix handling of eos buffer during drain Dikshita Agarwal
2025-03-05 10:43 ` [RFC PATCH 12/12] media: iris: Add handling for no show frames Dikshita Agarwal
2025-03-05 14:22 ` [RFC PATCH 00/12] Add support for HEVC and VP9 codecs in decoder neil.armstrong
2025-03-06 12:34   ` Dikshita Agarwal [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=31cfacfc-fd69-d488-e2f7-7399bd5a680a@quicinc.com \
    --to=quic_dikshita@quicinc.com \
    --cc=hverkuil@xs4all.nl \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=mchehab@kernel.org \
    --cc=neil.armstrong@linaro.org \
    --cc=quic_abhinavk@quicinc.com \
    --cc=quic_vgarodia@quicinc.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox