From: Akhil P Oommen <akhilpo@oss.qualcomm.com>
To: Jingyi Wang <jingyi.wang@oss.qualcomm.com>,
Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konradybcio@kernel.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>
Cc: linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, aiqun.yu@oss.qualcomm.com,
tingwei.zhang@oss.qualcomm.com, trilok.soni@oss.qualcomm.com,
yijie.yang@oss.qualcomm.com,
Tengfei Fan <tengfei.fan@oss.qualcomm.com>
Subject: Re: [PATCH 02/20] arm64: dts: qcom: Introduce Kaanapali SoC
Date: Tue, 14 Oct 2025 17:16:20 +0530 [thread overview]
Message-ID: <36fcea98-06a6-4ca7-a378-77b44b196a9d@oss.qualcomm.com> (raw)
In-Reply-To: <20250924-knp-dts-v1-2-3fdbc4b9e1b1@oss.qualcomm.com>
On 9/25/2025 5:47 AM, Jingyi Wang wrote:
> Kaanapali is Snapdragon SoC from Qualcomm.
>
> Features added in this patch:
> - CPUs with PSCI idle states and cpufreq
> - Interrupt-controller with PDC wakeup support
> - Timers, TCSR Clock Controllers
> - Reserved Shared memory
> - GCC and RPMHCC
> - TLMM
> - Interconnect with CPU BWMONs
> - QuP with uart
> - SMMU
> - RPMHPD
> - UFS with Inline Crypto Engine
> - LLCC
> - Watchdog
>
> Written with help from Raviteja Laggyshetty(added interconnect nodes),
> Taniya Das(added Clock Controllers and cpufreq), Jishnu Prakash
> (added rpmhpd), Nitin Rawat(added ufs) and Gaurav Kashyap(added ICE).
>
> Co-developed-by: Tengfei Fan <tengfei.fan@oss.qualcomm.com>
> Signed-off-by: Tengfei Fan <tengfei.fan@oss.qualcomm.com>
> Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
> ---
> arch/arm64/boot/dts/qcom/kaanapali.dtsi | 1320 +++++++++++++++++++++++++++++++
> 1 file changed, 1320 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/kaanapali.dtsi b/arch/arm64/boot/dts/qcom/kaanapali.dtsi
> new file mode 100644
> index 000000000000..b385b4642883
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/kaanapali.dtsi
> @@ -0,0 +1,1320 @@
> +// SPDX-License-Identifier: BSD-3-Clause
> +/*
> + * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
> + */
> +
> +#include <dt-bindings/clock/qcom,kaanapali-gcc.h>
> +#include <dt-bindings/clock/qcom,rpmh.h>
> +#include <dt-bindings/clock/qcom,sm8750-tcsr.h>
> +#include <dt-bindings/firmware/qcom,scm.h>
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/interconnect/qcom,icc.h>
> +#include <dt-bindings/interconnect/qcom,kaanapali-rpmh.h>
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/mailbox/qcom-ipcc.h>
> +#include <dt-bindings/power/qcom-rpmpd.h>
> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
> +#include <dt-bindings/soc/qcom,rpmh-rsc.h>
> +
> +/ {
> + interrupt-parent = <&intc>;
> +
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
> + cpus {
> + #address-cells = <2>;
> + #size-cells = <0>;
> +
> + cpu0: cpu@0 {
> + device_type = "cpu";
> + compatible = "qcom,oryon";
> + reg = <0x0 0x0>;
> + enable-method = "psci";
> + next-level-cache = <&l2_0>;
> + power-domains = <&cpu_pd0>;
> + power-domain-names = "psci";
> + clocks = <&pdp_scmi_perf 0>;
> +
> + l2_0: l2-cache {
> + compatible = "cache";
> + cache-level = <2>;
> + cache-unified;
> + };
> + };
> +
> + cpu1: cpu@100 {
> + device_type = "cpu";
> + compatible = "qcom,oryon";
> + reg = <0x0 0x100>;
> + enable-method = "psci";
> + next-level-cache = <&l2_0>;
> + power-domains = <&cpu_pd1>;
> + power-domain-names = "psci";
> + clocks = <&pdp_scmi_perf 0>;
> + };
> +
> + cpu2: cpu@200 {
> + device_type = "cpu";
> + compatible = "qcom,oryon";
> + reg = <0x0 0x200>;
> + enable-method = "psci";
> + next-level-cache = <&l2_0>;
> + power-domains = <&cpu_pd2>;
> + power-domain-names = "psci";
> + clocks = <&pdp_scmi_perf 0>;
> + };
> +
> + cpu3: cpu@300 {
> + device_type = "cpu";
> + compatible = "qcom,oryon";
> + reg = <0x0 0x300>;
> + enable-method = "psci";
> + next-level-cache = <&l2_0>;
> + power-domains = <&cpu_pd3>;
> + power-domain-names = "psci";
> + clocks = <&pdp_scmi_perf 0>;
> + };
> +
> + cpu4: cpu@400 {
> + device_type = "cpu";
> + compatible = "qcom,oryon";
> + reg = <0x0 0x400>;
> + enable-method = "psci";
> + next-level-cache = <&l2_0>;
> + power-domains = <&cpu_pd4>;
> + power-domain-names = "psci";
> + clocks = <&pdp_scmi_perf 0>;
> + };
> +
> + cpu5: cpu@500 {
> + device_type = "cpu";
> + compatible = "qcom,oryon";
> + reg = <0x0 0x500>;
> + enable-method = "psci";
> + next-level-cache = <&l2_0>;
> + power-domains = <&cpu_pd5>;
> + power-domain-names = "psci";
> + clocks = <&pdp_scmi_perf 0>;
> + };
> +
> + cpu6: cpu@10000 {
> + device_type = "cpu";
> + compatible = "qcom,oryon";
> + reg = <0x0 0x10000>;
> + enable-method = "psci";
> + next-level-cache = <&l2_1>;
> + power-domains = <&cpu_pd6>;
> + power-domain-names = "psci";
> + clocks = <&pdp_scmi_perf 1>;
> +
> + l2_1: l2-cache {
> + compatible = "cache";
> + cache-level = <2>;
> + cache-unified;
> + };
> + };
> +
> + cpu7: cpu@10100 {
> + device_type = "cpu";
> + compatible = "qcom,oryon";
> + reg = <0x0 0x10100>;
> + enable-method = "psci";
> + next-level-cache = <&l2_1>;
> + power-domains = <&cpu_pd7>;
> + power-domain-names = "psci";
> + clocks = <&pdp_scmi_perf 1>;
> + };
> +
> + cpu-map {
> + cluster0 {
> + core0 {
> + cpu = <&cpu0>;
> + };
> +
> + core1 {
> + cpu = <&cpu1>;
> + };
> +
> + core2 {
> + cpu = <&cpu2>;
> + };
> +
> + core3 {
> + cpu = <&cpu3>;
> + };
> +
> + core4 {
> + cpu = <&cpu4>;
> + };
> +
> + core5 {
> + cpu = <&cpu5>;
> + };
> + };
> +
> + cluster1 {
> + core0 {
> + cpu = <&cpu6>;
> + };
> +
> + core1 {
> + cpu = <&cpu7>;
> + };
> + };
> + };
> +
> + idle-states {
> + entry-method = "psci";
> +
> + cluster0_c4: cpu-sleep-0 {
> + compatible = "arm,idle-state";
> + idle-state-name = "retention";
> + arm,psci-suspend-param = <0x00000004>;
> + entry-latency-us = <93>;
> + exit-latency-us = <129>;
> + min-residency-us = <560>;
> + };
> +
> + cluster1_c4: cpu-sleep-1 {
> + compatible = "arm,idle-state";
> + idle-state-name = "retention";
> + arm,psci-suspend-param = <0x00000004>;
> + entry-latency-us = <172>;
> + exit-latency-us = <130>;
> + min-residency-us = <686>;
> + };
> + };
> +
> + domain-idle-states {
> + cluster_cl5: cluster-sleep-0 {
> + compatible = "domain-idle-state";
> + arm,psci-suspend-param = <0x01000054>;
> + entry-latency-us = <2150>;
> + exit-latency-us = <1983>;
> + min-residency-us = <9144>;
> + };
> +
> + domain_ss3: domain-sleep-0 {
> + compatible = "domain-idle-state";
> + arm,psci-suspend-param = <0x0200c354>;
> + entry-latency-us = <2800>;
> + exit-latency-us = <4400>;
> + min-residency-us = <10150>;
> + };
> + };
> + };
> +
> + firmware {
> + scm: scm {
> + compatible = "qcom,scm-kaanapali", "qcom,scm";
> + qcom,dload-mode = <&tcsr 0x19000>;
> + };
> +
> + scmi: scmi {
> + compatible = "arm,scmi";
> + mboxes = <&pdp0_mbox 0>, <&pdp0_mbox 1>;
> + mbox-names = "tx", "rx";
> + shmem = <&pdp_tx>, <&pdp_rx>;
> +
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + pdp_scmi_perf: protocol@13 {
> + reg = <0x13>;
> + #clock-cells = <1>;
> + };
> + };
> + };
> +
> + clk_virt: interconnect-0 {
> + compatible = "qcom,kaanapali-clk-virt";
> + #interconnect-cells = <2>;
> + qcom,bcm-voters = <&apps_bcm_voter>;
> + };
> +
> + mc_virt: interconnect-1 {
> + compatible = "qcom,kaanapali-mc-virt";
> + #interconnect-cells = <2>;
> + qcom,bcm-voters = <&apps_bcm_voter>;
> + };
> +
> + memory@a0000000 {
> + device_type = "memory";
> + /* We expect the bootloader to fill in the size */
> + reg = <0x0 0xa0000000 0x0 0x0>;
> + };
> +
> + pmu {
> + compatible = "arm,armv8-pmuv3";
> + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
> + };
> +
> + psci {
> + compatible = "arm,psci-1.0";
> + method = "smc";
> +
> + cpu_pd0: power-domain-cpu0 {
> + #power-domain-cells = <0>;
> + power-domains = <&cluster_pd>;
> + domain-idle-states = <&cluster0_c4>;
> + };
> +
> + cpu_pd1: power-domain-cpu1 {
> + #power-domain-cells = <0>;
> + power-domains = <&cluster_pd>;
> + domain-idle-states = <&cluster0_c4>;
> + };
> +
> + cpu_pd2: power-domain-cpu2 {
> + #power-domain-cells = <0>;
> + power-domains = <&cluster_pd>;
> + domain-idle-states = <&cluster0_c4>;
> + };
> +
> + cpu_pd3: power-domain-cpu3 {
> + #power-domain-cells = <0>;
> + power-domains = <&cluster_pd>;
> + domain-idle-states = <&cluster0_c4>;
> + };
> +
> + cpu_pd4: power-domain-cpu4 {
> + #power-domain-cells = <0>;
> + power-domains = <&cluster_pd>;
> + domain-idle-states = <&cluster0_c4>;
> + };
> +
> + cpu_pd5: power-domain-cpu5 {
> + #power-domain-cells = <0>;
> + power-domains = <&cluster_pd>;
> + domain-idle-states = <&cluster0_c4>;
> + };
> +
> + cpu_pd6: power-domain-cpu6 {
> + #power-domain-cells = <0>;
> + power-domains = <&cluster_pd>;
> + domain-idle-states = <&cluster1_c4>;
> + };
> +
> + cpu_pd7: power-domain-cpu7 {
> + #power-domain-cells = <0>;
> + power-domains = <&cluster_pd>;
> + domain-idle-states = <&cluster1_c4>;
> + };
> +
> + cluster_pd: power-domain-cluster {
> + #power-domain-cells = <0>;
> + domain-idle-states = <&cluster_cl5>;
> + power-domains = <&system_pd>;
> + };
> +
> + system_pd: power-domain-system {
> + #power-domain-cells = <0>;
> + domain-idle-states = <&domain_ss3>;
> + };
> + };
> +
> + reserved-memory {
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> +
This is missing a bunch of reserved regions which causes device crash
when you stress memory allocation.
-Akhil.
> + pdp_mem: pdp_region@81300000 {
> + reg = <0x0 0x81300000 0x0 0x100000>;
> + no-map;
> + };
> +
> + aop_cmd_db_mem: aop-cmd-db@81c60000 {
> + compatible = "qcom,cmd-db";
> + reg = <0x0 0x81c60000 0x0 0x20000>;
> + no-map;
> + };
> +
> + smem_mem: smem@81d00000 {
> + compatible = "qcom,smem";
> + reg = <0x0 0x81d00000 0x0 0x200000>;
> + hwlocks = <&tcsr_mutex 3>;
> + no-map;
> + };
> +
> + pdp_ns_shared_mem: pdp_ns_shared_region@81f00000 {
> + reg = <0x0 0x81f00000 0x0 0x100000>;
> + no-map;
> + };
> +
> + dsm_partition_1_mem: dsm-partition-1@84a00000 {
> + reg = <0x0 0x84a00000 0x0 0x5500000>;
> + no-map;
> + };
> +
> + dsm_partition_2_mem: dsm-partition-2@89f00000 {
> + reg = <0x0 0x89f00000 0x0 0xa80000>;
> + no-map;
> + };
> +
> + mpss_mem: mpss@8aa00000 {
> + reg = <0x0 0x8aa00000 0x0 0xeb00000>;
> + no-map;
> + };
> +
> + q6_mpss_dtb_mem: q6-mpss-dtb@99500000 {
> + reg = <0x0 0x99500000 0x0 0x80000>;
> + no-map;
> + };
> +
> + ipa_fw_mem: ipa-fw@99580000 {
> + reg = <0x0 0x99580000 0x0 0x10000>;
> + no-map;
> + };
> +
> + ipa_gsi_mem: ipa-gsi@99590000 {
> + reg = <0x0 0x99590000 0x0 0xa000>;
> + no-map;
> + };
> +
> + gpu_microcode_mem: gpu-microcode@9959a000 {
> + reg = <0x0 0x9959a000 0x0 0x2000>;
> + no-map;
> + };
> +
> + camera_mem: camera@99600000 {
> + reg = <0x0 0x99600000 0x0 0x800000>;
> + no-map;
> + };
> +
> + camera_2_mem: camera-2@99e00000 {
> + reg = <0x0 0x99e00000 0x0 0x800000>;
> + no-map;
> + };
> +
> + video_mem: video@9a600000 {
> + reg = <0x0 0x9a600000 0x0 0x800000>;
> + no-map;
> + };
> +
> + cvp_mem: cvp@9ae00000 {
> + reg = <0x0 0x9ae00000 0x0 0x700000>;
> + no-map;
> + };
> +
> + cdsp_mem: cdsp@9b500000 {
> + reg = <0x0 0x9b500000 0x0 0x1900000>;
> + no-map;
> + };
> +
> + q6_cdsp_dtb_mem: q6-cdsp-dtb@9ce00000 {
> + reg = <0x0 0x9ce00000 0x0 0x80000>;
> + no-map;
> + };
> +
> + soccp_mem: soccp@a03d0000 {
> + reg = <0x0 0xa03d0000 0x0 0x500000>;
> + no-map;
> + };
> +
> + soccp_dtb_mem: soccp-dtb@a08d0000 {
> + reg = <0x0 0xa08d0000 0x0 0x40000>;
> + no-map;
> + };
> +
> + q6_adsp_dtb_mem: q6-adsp-dtb@a1380000 {
> + reg = <0x0 0xa1380000 0x0 0x80000>;
> + no-map;
> + };
> +
> + adspslpi_mem: adspslpi@a1400000 {
> + reg = <0x0 0xa1400000 0x0 0x4c00000>;
> + no-map;
> + };
> +
> + rmtfs_mem: rmtfs@d7c00000 {
> + compatible = "qcom,rmtfs-mem";
> + reg = <0 0xd7c00000 0 0x400000>;
> + no-map;
> +
> + qcom,client-id = <1>;
> + qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>;
> + };
> + };
> +
> + soc: soc@0 {
> + compatible = "simple-bus";
> +
> + #address-cells = <2>;
> + #size-cells = <2>;
> + dma-ranges = <0 0 0 0 0x10 0>;
> + ranges = <0 0 0 0 0x10 0>;
> +
> + gcc: clock-controller@100000 {
> + compatible = "qcom,kaanapali-gcc";
> + reg = <0x0 0x00100000 0x0 0x1f4200>;
> +
> + clocks = <&bi_tcxo_div2>,
> + <0>,
> + <&sleep_clk>,
> + <0>,
> + <0>,
> + <0>,
> + <0>,
> + <0>;
> +
> + #clock-cells = <1>;
> + #reset-cells = <1>;
> + #power-domain-cells = <1>;
> + };
> +
> + qupv3_1: geniqup@ac0000 {
> + compatible = "qcom,geni-se-qup";
> + reg = <0x0 0x00ac0000 0x0 0x2000>;
> +
> + clocks = <&gcc GCC_QUPV3_WRAP_1_M_AXI_CLK>,
> + <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
> + clock-names = "m-ahb",
> + "s-ahb";
> +
> + iommus = <&apps_smmu 0xa3 0x0>;
> +
> + dma-coherent;
> +
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> +
> + uart7: serial@a9c000 {
> + compatible = "qcom,geni-debug-uart";
> + reg = <0x0 0x00a9c000 0x0 0x4000>;
> +
> + interrupts = <GIC_SPI 835 IRQ_TYPE_LEVEL_HIGH>;
> +
> + clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
> + clock-names = "se";
> +
> + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
> + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
> + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
> + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>;
> + interconnect-names = "qup-core",
> + "qup-config";
> +
> + pinctrl-0 = <&qup_uart7_default>;
> + pinctrl-names = "default";
> +
> + status = "disabled";
> + };
> + };
> +
> + ipcc: mailbox@1106000 {
> + compatible = "qcom,kaanapali-ipcc", "qcom,ipcc";
> + reg = <0x0 0x01106000 0x0 0x1000>;
> +
> + interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-controller;
> + #interrupt-cells = <3>;
> +
> + #mbox-cells = <2>;
> + };
> +
> + cnoc_main: interconnect@1500000 {
> + compatible = "qcom,kaanapali-cnoc-main";
> + reg = <0x0 0x01500000 0x0 0x1a080>;
> + qcom,bcm-voters = <&apps_bcm_voter>;
> + #interconnect-cells = <2>;
> + };
> +
> + config_noc: interconnect@1600000 {
> + compatible = "qcom,kaanapali-cnoc-cfg";
> + reg = <0x0 0x01600000 0x0 0x6200>;
> + qcom,bcm-voters = <&apps_bcm_voter>;
> + #interconnect-cells = <2>;
> + };
> +
> + system_noc: interconnect@1680000 {
> + compatible = "qcom,kaanapali-system-noc";
> + reg = <0x0 0x01680000 0x0 0x1f080>;
> + qcom,bcm-voters = <&apps_bcm_voter>;
> + #interconnect-cells = <2>;
> + };
> +
> + pcie_noc: interconnect@16c0000 {
> + compatible = "qcom,kaanapali-pcie-anoc";
> + reg = <0x0 0x016c0000 0x0 0x11400>;
> + qcom,bcm-voters = <&apps_bcm_voter>;
> + #interconnect-cells = <2>;
> + clocks = <&gcc GCC_AGGRE_NOC_PCIE_AXI_CLK>,
> + <&gcc GCC_CFG_NOC_PCIE_ANOC_AHB_CLK>;
> + };
> +
> + aggre_noc: interconnect@16e0000 {
> + compatible = "qcom,kaanapali-aggre-noc";
> + reg = <0x0 0x016e0000 0x0 0x42400>;
> + qcom,bcm-voters = <&apps_bcm_voter>;
> + #interconnect-cells = <2>;
> + clocks = <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
> + <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
> + <&rpmhcc RPMH_IPA_CLK>;
> + };
> +
> + mmss_noc: interconnect@1780000 {
> + compatible = "qcom,kaanapali-mmss-noc";
> + reg = <0x0 0x01780000 0x0 0x5b800>;
> + qcom,bcm-voters = <&apps_bcm_voter>;
> + #interconnect-cells = <2>;
> + };
> +
> + ufs_mem_phy: phy@1d80000 {
> + compatible = "qcom,kaanapali-qmp-ufs-phy", "qcom,sm8750-qmp-ufs-phy";
> + reg = <0x0 0x01d80000 0x0 0x2000>;
> +
> + clocks = <&rpmhcc RPMH_CXO_CLK>,
> + <&gcc GCC_UFS_PHY_PHY_AUX_CLK>,
> + <&tcsrcc TCSR_UFS_CLKREF_EN>;
> +
> + clock-names = "ref",
> + "ref_aux",
> + "qref";
> +
> + resets = <&ufs_mem_hc 0>;
> + reset-names = "ufsphy";
> +
> + power-domains = <&gcc GCC_UFS_MEM_PHY_GDSC>;
> +
> + #clock-cells = <1>;
> + #phy-cells = <0>;
> +
> + status = "disabled";
> + };
> +
> + ufs_mem_hc: ufs@1d84000 {
> + compatible = "qcom,kaanapali-ufshc",
> + "qcom,ufshc",
> + "jedec,ufs-2.0";
> + reg = <0x0 0x01d84000 0x0 0x3000>;
> +
> + interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
> +
> + clocks = <&gcc GCC_UFS_PHY_AXI_CLK>,
> + <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
> + <&gcc GCC_UFS_PHY_AHB_CLK>,
> + <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
> + <&rpmhcc RPMH_LN_BB_CLK3>,
> + <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
> + <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
> + <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>;
> + clock-names = "core_clk",
> + "bus_aggr_clk",
> + "iface_clk",
> + "core_clk_unipro",
> + "ref_clk",
> + "tx_lane0_sync_clk",
> + "rx_lane0_sync_clk",
> + "rx_lane1_sync_clk";
> +
> + operating-points-v2 = <&ufs_opp_table>;
> +
> + resets = <&gcc GCC_UFS_PHY_BCR>;
> + reset-names = "rst";
> +
> + interconnects = <&aggre_noc MASTER_UFS_MEM QCOM_ICC_TAG_ALWAYS
> + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
> + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
> + &config_noc SLAVE_UFS_MEM_CFG QCOM_ICC_TAG_ACTIVE_ONLY>;
> + interconnect-names = "ufs-ddr",
> + "cpu-ufs";
> +
> + power-domains = <&gcc GCC_UFS_PHY_GDSC>;
> + required-opps = <&rpmhpd_opp_nom>;
> +
> + iommus = <&apps_smmu 0x60 0x0>;
> + dma-coherent;
> +
> + lanes-per-direction = <2>;
> + qcom,ice = <&ice>;
> +
> + phys = <&ufs_mem_phy>;
> + phy-names = "ufsphy";
> +
> + #reset-cells = <1>;
> +
> + status = "disabled";
> +
> + ufs_opp_table: opp-table {
> + compatible = "operating-points-v2";
> +
> + opp-75000000 {
> + opp-hz = /bits/ 64 <75000000>,
> + /bits/ 64 <0>,
> + /bits/ 64 <0>,
> + /bits/ 64 <75000000>,
> + /bits/ 64 <0>,
> + /bits/ 64 <0>,
> + /bits/ 64 <0>,
> + /bits/ 64 <0>;
> + required-opps = <&rpmhpd_opp_low_svs_d1>;
> + };
> +
> + opp-100000000 {
> + opp-hz = /bits/ 64 <100000000>,
> + /bits/ 64 <0>,
> + /bits/ 64 <0>,
> + /bits/ 64 <100000000>,
> + /bits/ 64 <0>,
> + /bits/ 64 <0>,
> + /bits/ 64 <0>,
> + /bits/ 64 <0>;
> + required-opps = <&rpmhpd_opp_low_svs>;
> + };
> +
> + opp-403000000 {
> + opp-hz = /bits/ 64 <403000000>,
> + /bits/ 64 <0>,
> + /bits/ 64 <0>,
> + /bits/ 64 <403000000>,
> + /bits/ 64 <0>,
> + /bits/ 64 <0>,
> + /bits/ 64 <0>,
> + /bits/ 64 <0>;
> + required-opps = <&rpmhpd_opp_nom>;
> + };
> + };
> + };
> +
> + ice: crypto@1d88000 {
> + compatible = "qcom,kaanapali-inline-crypto-engine",
> + "qcom,inline-crypto-engine";
> + reg = <0x0 0x01d88000 0x0 0x18000>;
> +
> + clocks = <&gcc GCC_UFS_PHY_ICE_CORE_CLK>;
> + };
> +
> + tcsr_mutex: hwlock@1f40000 {
> + compatible = "qcom,tcsr-mutex";
> + reg = <0x0 0x01f40000 0x0 0x20000>;
> + #hwlock-cells = <1>;
> + };
> +
> + tcsr: syscon@1fc0000 {
> + compatible = "qcom,tcsr-kaanapali", "syscon";
> + reg = <0x0 0x1fc0000 0x0 0x30000>;
> + };
> +
> + tcsrcc: clock-controller@1fd5044 {
> + compatible = "qcom,kaanapali-tcsr", "syscon";
> + reg = <0x0 0x01fd5044 0x0 0x1c>;
> +
> + clocks = <&rpmhcc RPMH_CXO_CLK>;
> +
> + #clock-cells = <1>;
> + #reset-cells = <1>;
> + };
> +
> + lpass_lpiaon_noc: interconnect@7400000 {
> + compatible = "qcom,kaanapali-lpass-lpiaon-noc";
> + reg = <0x0 0x07400000 0x0 0x19080>;
> + qcom,bcm-voters = <&apps_bcm_voter>;
> + #interconnect-cells = <2>;
> + };
> +
> + lpass_lpicx_noc: interconnect@7420000 {
> + compatible = "qcom,kaanapali-lpass-lpicx-noc";
> + reg = <0x0 0x07420000 0x0 0x44080>;
> + qcom,bcm-voters = <&apps_bcm_voter>;
> + #interconnect-cells = <2>;
> + };
> +
> + lpass_ag_noc: interconnect@7f40000 {
> + compatible = "qcom,kaanapali-lpass-ag-noc";
> + reg = <0x0 0x07f40000 0x0 0xe080>;
> + qcom,bcm-voters = <&apps_bcm_voter>;
> + #interconnect-cells = <2>;
> + };
> +
> + pdc: interrupt-controller@b220000 {
> + compatible = "qcom,kaanapali-pdc", "qcom,pdc";
> + reg = <0x0 0x0b220000 0x0 0x10000>,
> + <0x0 0x179600f0 0x0 0xf4>;
> +
> + qcom,pdc-ranges = <0 745 38>,
> + <40 785 11>,
> + <51 527 4>,
> + <58 534 2>,
> + <61 537 20>,
> + <84 559 14>,
> + <98 609 32>,
> + <130 717 12>,
> + <142 251 5>,
> + <147 796 16>,
> + <163 783 2>,
> + <165 531 2>,
> + <167 536 1>,
> + <168 557 2>,
> + <170 415 1>,
> + <171 438 1>,
> + <172 579 1>,
> + <173 703 1>,
> + <174 708 1>,
> + <175 714 1>,
> + <176 68 1>,
> + <177 86 1>,
> + <178 96 1>,
> + <179 249 1>;
> + #interrupt-cells = <2>;
> + interrupt-parent = <&intc>;
> + interrupt-controller;
> + };
> +
> + aoss_qmp: power-management@c300000 {
> + compatible = "qcom,kaanapali-aoss-qmp", "qcom,aoss-qmp";
> + reg = <0x0 0x0c300000 0x0 0x400>;
> +
> + interrupts-extended = <&ipcc IPCC_MPROC_AOP
> + IPCC_MPROC_SIGNAL_GLINK_QMP
> + IRQ_TYPE_EDGE_RISING>;
> +
> + mboxes = <&ipcc IPCC_MPROC_AOP
> + IPCC_MPROC_SIGNAL_GLINK_QMP>;
> +
> + #clock-cells = <0>;
> + };
> +
> + tlmm: pinctrl@f100000 {
> + compatible = "qcom,kaanapali-tlmm";
> + reg = <0x0 0x0f100000 0x0 0x300000>;
> + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + gpio-ranges = <&tlmm 0 0 218>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + wakeup-parent = <&pdc>;
> +
> + qup_uart7_default: qup-uart7-state {
> + /* TX, RX */
> + pins = "gpio62", "gpio63";
> + function = "qup1_se7";
> + drive-strength = <2>;
> + bias-disable;
> + };
> + };
> +
> + sram@14680000 {
> + compatible = "qcom,kaanapali-imem", "syscon", "simple-mfd";
> + reg = <0x0 0x14680000 0x0 0x1000>;
> + ranges = <0 0 0x14680000 0x1000>;
> +
> + #address-cells = <1>;
> + #size-cells = <1>;
> +
> + pil-reloc@94c {
> + compatible = "qcom,pil-reloc-info";
> + reg = <0x94c 0xc8>;
> + };
> + };
> +
> + apps_smmu: iommu@15000000 {
> + compatible = "qcom,kaanapali-smmu-500", "qcom,smmu-500", "arm,mmu-500";
> + reg = <0x0 0x15000000 0x0 0x100000>;
> +
> + interrupts =<GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 707 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 690 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 691 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 692 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 693 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 694 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 695 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 696 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 697 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 410 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 488 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 489 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 490 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 491 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 492 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 493 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 494 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 495 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 496 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 497 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 498 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 499 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 500 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 501 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 502 IRQ_TYPE_LEVEL_HIGH>;
> +
> + #iommu-cells = <2>;
> + #global-interrupts = <1>;
> +
> + dma-coherent;
> + };
> +
> + intc: interrupt-controller@17000000 {
> + compatible = "arm,gic-v3";
> + reg = <0x0 0x17000000 0x0 0x10000>,
> + <0x0 0x17080000 0x0 0x200000>;
> +
> + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
> +
> + #interrupt-cells = <3>;
> + interrupt-controller;
> +
> + #redistributor-regions = <1>;
> + redistributor-stride = <0x0 0x40000>;
> +
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> +
> + gic_its: msi-controller@17040000 {
> + compatible = "arm,gic-v3-its";
> + reg = <0x0 0x17040000 0x0 0x20000>;
> +
> + msi-controller;
> + #msi-cells = <1>;
> + };
> + };
> +
> + watchdog@17600000 {
> + compatible = "qcom,apss-wdt-kaanapali", "qcom,kpss-wdt";
> + reg = <0x0 0x17600000 0x0 0x1000>;
> + clocks = <&sleep_clk>;
> + interrupts = <GIC_SPI 0 IRQ_TYPE_EDGE_RISING>;
> + };
> +
> + pdp0_mbox: mailbox@17610000 {
> + compatible = "qcom,kaanapali-cpucp-mbox", "qcom,x1e80100-cpucp-mbox";
> + reg = <0 0x17610000 0 0x8000>, <0 0x19980000 0 0x8000>;
> + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
> + #mbox-cells = <1>;
> + };
> +
> + timer@17810000 {
> + compatible = "arm,armv7-timer-mem";
> + reg = <0x0 0x17810000 0x0 0x1000>;
> +
> + #address-cells = <2>;
> + #size-cells = <1>;
> + ranges = <0 0 0 0 0x20000000>;
> +
> + frame@17811000 {
> + reg = <0x0 0x17811000 0x1000>,
> + <0x0 0x17812000 0x1000>;
> + frame-number = <0>;
> + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
> + };
> +
> + frame@17813000 {
> + reg = <0x0 0x17813000 0x1000>;
> + frame-number = <1>;
> + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
> + status = "disabled";
> + };
> +
> + frame@17815000 {
> + reg = <0x0 0x17815000 0x1000>;
> + frame-number = <2>;
> + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
> + status = "disabled";
> + };
> +
> + frame@17817000 {
> + reg = <0x0 0x17817000 0x1000>;
> + frame-number = <3>;
> + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
> + status = "disabled";
> + };
> +
> + frame@17819000 {
> + reg = <0x0 0x17819000 0x1000>;
> + frame-number = <4>;
> + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
> + status = "disabled";
> + };
> +
> + frame@1781b000 {
> + reg = <0x0 0x1781b000 0x1000>;
> + frame-number = <5>;
> + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
> + status = "disabled";
> + };
> +
> + frame@1781d000 {
> + reg = <0x0 0x1781d000 0x1000>;
> + frame-number = <6>;
> + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
> + status = "disabled";
> + };
> + };
> +
> + apps_rsc: rsc@18900000 {
> + compatible = "qcom,rpmh-rsc";
> + reg = <0x0 0x18900000 0x0 0x10000>,
> + <0x0 0x18910000 0x0 0x10000>,
> + <0x0 0x18920000 0x0 0x10000>;
> + reg-names = "drv-0",
> + "drv-1",
> + "drv-2";
> + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
> +
> + power-domains = <&system_pd>;
> + label = "apps_rsc";
> +
> + qcom,tcs-offset = <0xd00>;
> + qcom,drv-id = <2>;
> + qcom,tcs-config = <ACTIVE_TCS 3>,
> + <SLEEP_TCS 2>,
> + <WAKE_TCS 2>,
> + <CONTROL_TCS 0>;
> +
> + apps_bcm_voter: bcm-voter {
> + compatible = "qcom,bcm-voter";
> + };
> +
> + rpmhcc: clock-controller {
> + compatible = "qcom,kaanapali-rpmh-clk";
> + #clock-cells = <1>;
> + clocks = <&xo_board>;
> + clock-names = "xo";
> + };
> +
> + rpmhpd: power-controller {
> + compatible = "qcom,kaanapali-rpmhpd";
> +
> + operating-points-v2 = <&rpmhpd_opp_table>;
> +
> + #power-domain-cells = <1>;
> +
> + rpmhpd_opp_table: opp-table {
> + compatible = "operating-points-v2";
> +
> + rpmhpd_opp_ret: opp-16 {
> + opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
> + };
> +
> + rpmhpd_opp_low_svs_d3: opp-50 {
> + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D3>;
> + };
> +
> + rpmhpd_opp_low_svs_d2_1: opp-51 {
> + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D2_1>;
> + };
> +
> + rpmhpd_opp_low_svs_d2: opp-52 {
> + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D2>;
> + };
> +
> + rpmhpd_opp_low_svs_d1_1: opp-54 {
> + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D1_1>;
> + };
> +
> + rpmhpd_opp_low_svs_d1: opp-56 {
> + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D1>;
> + };
> +
> + rpmhpd_opp_low_svs_d0: opp-60 {
> + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D0>;
> + };
> +
> + rpmhpd_opp_low_svs: opp-64 {
> + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
> + };
> +
> + rpmhpd_opp_low_svs_l0: opp-76 {
> + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_L0>;
> + };
> +
> + rpmhpd_opp_low_svs_l1: opp-80 {
> + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_L1>;
> + };
> +
> + rpmhpd_opp_low_svs_l2: opp-96 {
> + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_L2>;
> + };
> +
> + rpmhpd_opp_svs: opp-128 {
> + opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
> + };
> +
> + rpmhpd_opp_svs_l0: opp-144 {
> + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L0>;
> + };
> +
> + rpmhpd_opp_svs_l1: opp-192 {
> + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
> + };
> +
> + rpmhpd_opp_svs_l2: opp-224 {
> + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L2>;
> + };
> +
> + rpmhpd_opp_nom: opp-256 {
> + opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
> + };
> +
> + rpmhpd_opp_nom_l1: opp-320 {
> + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
> + };
> +
> + rpmhpd_opp_nom_l2: opp-336 {
> + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
> + };
> +
> + rpmhpd_opp_turbo: opp-384 {
> + opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
> + };
> +
> + rpmhpd_opp_turbo_l0: opp-400 {
> + opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L0>;
> + };
> +
> + rpmhpd_opp_turbo_l1: opp-416 {
> + opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
> + };
> +
> + rpmhpd_opp_turbo_l2: opp-432 {
> + opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L2>;
> + };
> +
> + rpmhpd_opp_turbo_l3: opp-448 {
> + opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L3>;
> + };
> +
> + rpmhpd_opp_turbo_l4: opp-452 {
> + opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L4>;
> + };
> +
> + rpmhpd_opp_turbo_l5: opp-456 {
> + opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L5>;
> + };
> +
> + rpmhpd_opp_super_turbo_no_cpr: opp-480 {
> + opp-level = <RPMH_REGULATOR_LEVEL_SUPER_TURBO_NO_CPR>;
> + };
> + };
> + };
> + };
> +
> + nsp_noc: interconnect@260c0000 {
> + compatible = "qcom,kaanapali-nsp-noc";
> + reg = <0x0 0x260c0000 0x0 0x21280>;
> + qcom,bcm-voters = <&apps_bcm_voter>;
> + #interconnect-cells = <2>;
> + };
> +
> + /* Cluster 0 */
> + pmu@310b3400 {
> + compatible = "qcom,kaanapali-cpu-bwmon", "qcom,sdm845-bwmon";
> + reg = <0x0 0x310b3400 0x0 0x600>;
> +
> + interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH>;
> +
> + interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
> + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>;
> +
> + operating-points-v2 = <&cpu_bwmon_opp_table>;
> +
> + cpu_bwmon_opp_table: opp-table {
> + compatible = "operating-points-v2";
> +
> + opp-0 {
> + opp-peak-kBps = <2188000>;
> + };
> +
> + opp-1 {
> + opp-peak-kBps = <5412000>;
> + };
> +
> + opp-2 {
> + opp-peak-kBps = <6220000>;
> + };
> +
> + opp-3 {
> + opp-peak-kBps = <6832000>;
> + };
> +
> + opp-4 {
> + opp-peak-kBps = <8368000>;
> + };
> +
> + opp-5 {
> + opp-peak-kBps = <10944000>;
> + };
> +
> + opp-6 {
> + opp-peak-kBps = <12748000>;
> + };
> +
> + opp-7 {
> + opp-peak-kBps = <14744000>;
> + };
> +
> + opp-8 {
> + opp-peak-kBps = <16896000>;
> + };
> +
> + opp-9 {
> + opp-peak-kBps = <19120000>;
> + };
> +
> + opp-10 {
> + opp-peak-kBps = <21332000>;
> + };
> + };
> + };
> +
> + /* Cluster 1 */
> + pmu@310b7400 {
> + compatible = "qcom,kaanapali-cpu-bwmon", "qcom,sdm845-bwmon";
> + reg = <0x0 0x310b7400 0x0 0x600>;
> +
> + interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH>;
> +
> + interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
> + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>;
> +
> + operating-points-v2 = <&cpu_bwmon_opp_table>;
> + };
> +
> + gem_noc: interconnect@31100000 {
> + compatible = "qcom,kaanapali-gem-noc";
> + reg = <0x0 0x31100000 0x0 0x153080>;
> + qcom,bcm-voters = <&apps_bcm_voter>;
> + #interconnect-cells = <2>;
> + };
> +
> + system-cache-controller@31800000 {
> + compatible = "qcom,kaanapali-llcc";
> + reg = <0x0 0x31800000 0x0 0x200000>,
> + <0x0 0x32800000 0x0 0x200000>,
> + <0x0 0x31c00000 0x0 0x200000>,
> + <0x0 0x32c00000 0x0 0x200000>,
> + <0x0 0x34800000 0x0 0x200000>,
> + <0x0 0x34c00000 0x0 0x200000>;
> + reg-names = "llcc0_base",
> + "llcc1_base",
> + "llcc2_base",
> + "llcc3_base",
> + "llcc_broadcast_base",
> + "llcc_broadcast_and_base";
> +
> + interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
> + };
> +
> + sram: sram@81f08000 {
> + compatible = "mmio-sram";
> + reg = <0x0 0x81f08000 0x0 0x200>;
> +
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0 0x0 0x81f08000 0x200>;
> +
> + pdp_rx: scp-sram-section@0 {
> + compatible = "arm,scmi-shmem";
> + reg = <0x0 0x80>;
> + };
> +
> + pdp_tx: scp-sram-section@100 {
> + compatible = "arm,scmi-shmem";
> + reg = <0x100 0x80>;
> + };
> + };
> + };
> +
> + timer {
> + compatible = "arm,armv8-timer";
> +
> + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
> + <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
> + <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
> + <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
> + };
> +};
>
next prev parent reply other threads:[~2025-10-14 11:46 UTC|newest]
Thread overview: 135+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-09-25 0:17 [PATCH 00/20] arm64: dts: qcom: Introduce Kaanapali platform device tree Jingyi Wang
2025-09-25 0:17 ` [PATCH 01/20] dt-bindings: arm: qcom: Document Kaanapali SoC and its reference boards Jingyi Wang
2025-10-06 9:54 ` Krzysztof Kozlowski
2025-10-06 10:24 ` Krzysztof Kozlowski
2025-10-14 5:13 ` Jingyi Wang
2025-09-25 0:17 ` [PATCH 02/20] arm64: dts: qcom: Introduce Kaanapali SoC Jingyi Wang
2025-09-25 3:22 ` Dmitry Baryshkov
2025-10-14 16:43 ` Taniya Das
2025-10-14 11:46 ` Akhil P Oommen [this message]
2025-11-04 9:04 ` Jingyi Wang
2025-11-04 12:54 ` Konrad Dybcio
2025-11-05 7:30 ` Jingyi Wang
2025-11-05 10:13 ` Konrad Dybcio
2025-11-20 6:53 ` Komal Bajaj
2025-11-20 7:22 ` Jingyi Wang
2025-09-25 0:17 ` [PATCH 03/20] arm64: dts: qcom: kaanapali: Add base MTP board Jingyi Wang
2025-09-25 3:18 ` Dmitry Baryshkov
2025-09-25 7:17 ` Aiqun(Maria) Yu
2025-09-25 9:44 ` Konrad Dybcio
2025-09-25 0:17 ` [PATCH 04/20] arm64: dts: qcom: kaanapali: Add support for PCIe0 on Kaanapali Jingyi Wang
2025-09-25 10:56 ` Konrad Dybcio
2025-10-06 14:23 ` Krzysztof Kozlowski
2025-10-07 1:24 ` Dmitry Baryshkov
2025-10-07 1:46 ` Krzysztof Kozlowski
2025-10-08 19:04 ` Dmitry Baryshkov
2025-09-25 0:17 ` [PATCH 05/20] arm64: dts: qcom: kaanapali: Add SDC2 nodes for Kaanapali soc Jingyi Wang
2025-09-25 0:17 ` [PATCH 06/20] arm64: dts: qcom: kaanapali: Add USB support for Kaanapali SoC Jingyi Wang
2025-09-25 1:50 ` Krzysztof Kozłowski
2025-09-25 7:39 ` Aiqun(Maria) Yu
2025-09-25 8:24 ` Krzysztof Kozłowski
2025-09-25 8:32 ` Krzysztof Kozlowski
2025-09-25 9:01 ` Krzysztof Kozlowski
2025-09-25 16:49 ` Dmitry Baryshkov
2025-09-25 18:26 ` Trilok Soni
2025-09-26 13:04 ` Konrad Dybcio
2025-09-25 13:57 ` Bjorn Andersson
2025-09-25 14:12 ` Krzysztof Kozlowski
2025-09-25 21:31 ` Rob Herring
2025-09-26 13:21 ` Konrad Dybcio
2025-09-26 14:47 ` Rob Herring
2025-09-29 6:06 ` Aiqun(Maria) Yu
2025-09-29 7:19 ` Dmitry Baryshkov
2025-09-25 3:20 ` Dmitry Baryshkov
2025-09-25 7:49 ` Aiqun(Maria) Yu
2025-09-25 9:46 ` Konrad Dybcio
2025-09-25 0:17 ` [PATCH 07/20] arm64: dts: qcom: kaanapali: Add remoteprocs " Jingyi Wang
2025-09-30 17:24 ` Alexey Klimov
2025-11-04 8:59 ` Jingyi Wang
2025-11-04 10:01 ` Kumari Pallavi
2025-11-04 13:25 ` Alexey Klimov
2025-09-25 0:17 ` [PATCH 08/20] arm64: dts: qcom: Add PMK8850 pmic dtsi Jingyi Wang
2025-09-25 12:20 ` Konrad Dybcio
2025-09-25 0:17 ` [PATCH 09/20] arm64: dts: qcom: Add PMH0101 " Jingyi Wang
2025-09-25 12:20 ` Konrad Dybcio
2025-10-09 13:47 ` Jishnu Prakash
2025-09-25 0:17 ` [PATCH 10/20] arm64: dts: qcom: Add PMH0104 " Jingyi Wang
2025-09-25 7:59 ` Krzysztof Kozlowski
2025-09-25 12:21 ` Konrad Dybcio
2025-09-29 6:51 ` Aiqun(Maria) Yu
2025-09-25 0:17 ` [PATCH 11/20] arm64: dts: qcom: Add PMH0110 " Jingyi Wang
2025-09-25 0:17 ` [PATCH 12/20] arm64: dts: qcom: kaanapali: Add misc features Jingyi Wang
2025-09-25 0:17 ` [PATCH 13/20] arm64: dts: qcom: kaanapali: Add QUPv3 configuration for serial engines Jingyi Wang
2025-09-25 12:28 ` Konrad Dybcio
2025-09-25 13:19 ` Krzysztof Kozlowski
2025-09-29 3:05 ` Jingyi Wang
2025-09-29 5:42 ` Jingyi Wang
2025-09-29 6:41 ` Aiqun(Maria) Yu
2025-09-29 13:11 ` Konstantin Ryabitsev
2025-09-30 2:14 ` Aiqun(Maria) Yu
2025-09-25 0:17 ` [PATCH 14/20] arm64: dts: qcom: kaanapali-mtp: Enable more features Jingyi Wang
2025-09-25 2:09 ` Dmitry Baryshkov
2025-09-25 9:48 ` Konrad Dybcio
2025-09-26 9:11 ` Ronak Raheja
2025-09-26 11:44 ` Konrad Dybcio
2025-09-26 13:46 ` Dmitry Baryshkov
2025-09-29 3:24 ` Jingyi Wang
2025-09-25 8:03 ` Eugen Hristev
2025-10-09 13:54 ` Jishnu Prakash
2025-10-09 14:58 ` Eugen Hristev
2025-10-09 16:28 ` Dmitry Baryshkov
2025-10-10 10:54 ` Jishnu Prakash
2025-10-10 14:02 ` Eugen Hristev
2025-10-13 16:21 ` Kamal Wadhwa
2025-09-25 0:17 ` [PATCH 15/20] arm64: dts: qcom: kaanapali-mtp: Enable modem Jingyi Wang
2025-09-25 2:10 ` Dmitry Baryshkov
2025-09-29 3:28 ` Jingyi Wang
2025-09-25 14:06 ` Bjorn Andersson
2025-09-29 3:29 ` Jingyi Wang
2025-09-25 0:17 ` [PATCH 16/20] arm64: dts: qcom: kaanapali: Add QRD board Jingyi Wang
2025-09-25 2:15 ` Dmitry Baryshkov
2025-09-29 3:29 ` Jingyi Wang
2025-09-25 0:17 ` [PATCH 17/20] arm64: dts: qcom: kaanapali: Add support for audio Jingyi Wang
2025-09-25 12:30 ` Konrad Dybcio
2025-09-25 0:17 ` [PATCH 18/20] arm64: dts: qcom: kaanapali-mtp: Add audio support (WSA8845, WCD9395, DMIC) Jingyi Wang
2025-09-25 12:30 ` Konrad Dybcio
2025-09-25 13:26 ` Krzysztof Kozlowski
2025-09-30 12:06 ` Prasad Kumpatla
2025-10-06 8:48 ` Krzysztof Kozlowski
2025-10-08 10:20 ` Konrad Dybcio
2025-10-08 10:51 ` Krzysztof Kozlowski
2025-10-08 11:30 ` Konrad Dybcio
2025-10-08 23:50 ` Krzysztof Kozlowski
2025-10-27 9:39 ` Konrad Dybcio
2025-09-25 0:17 ` [PATCH 19/20] arm64: dts: qcom: kaanapali: Add support for camss Jingyi Wang
2025-09-25 0:17 ` [PATCH 20/20] arm64: dts: qcom: kaanapali: Add iris video node Jingyi Wang
2025-10-07 2:17 ` Krzysztof Kozlowski
2025-10-08 8:30 ` Konrad Dybcio
2025-09-25 14:12 ` [PATCH 00/20] arm64: dts: qcom: Introduce Kaanapali platform device tree Rob Herring (Arm)
2025-09-25 16:51 ` Dmitry Baryshkov
2025-09-30 17:48 ` Alexey Klimov
2025-10-03 9:09 ` Prasad Kumpatla
2025-10-03 16:35 ` Alexey Klimov
2025-10-14 6:09 ` Jingyi Wang
2025-12-02 18:21 ` Pavel Machek
2025-12-02 18:33 ` Konrad Dybcio
2025-12-02 20:56 ` Pavel Machek
2025-12-03 10:34 ` Konrad Dybcio
2025-12-03 16:17 ` Pavel Machek
2025-12-03 17:31 ` Krzysztof Kozlowski
2025-12-03 18:10 ` Pavel Machek
2025-12-03 18:40 ` Krzysztof Kozlowski
2025-12-03 18:41 ` Krzysztof Kozlowski
2025-12-04 9:09 ` Pavel Machek
2025-12-04 10:41 ` Krzysztof Kozlowski
2025-12-04 11:42 ` Pavel Machek
2025-12-04 12:10 ` Krzysztof Kozlowski
2025-12-04 12:26 ` Pavel Machek
2025-12-04 9:14 ` Pavel Machek
2025-12-04 10:42 ` Krzysztof Kozlowski
2025-12-04 11:44 ` Pavel Machek
2025-12-04 12:07 ` Krzysztof Kozlowski
2025-12-04 2:41 ` Jingyi Wang
2025-12-04 8:56 ` Pavel Machek
2025-12-04 9:01 ` Krzysztof Kozlowski
2025-12-04 9:06 ` Pavel Machek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=36fcea98-06a6-4ca7-a378-77b44b196a9d@oss.qualcomm.com \
--to=akhilpo@oss.qualcomm.com \
--cc=aiqun.yu@oss.qualcomm.com \
--cc=andersson@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=jingyi.wang@oss.qualcomm.com \
--cc=konradybcio@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh@kernel.org \
--cc=tengfei.fan@oss.qualcomm.com \
--cc=tingwei.zhang@oss.qualcomm.com \
--cc=trilok.soni@oss.qualcomm.com \
--cc=yijie.yang@oss.qualcomm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox