From: "Slark Xiao" <slark_xiao@163.com>
To: mani@kernel.org, gregkh@linuxfoundation.org, loic.poulain@linaro.org
Cc: dnlplm@gmail.com, yonglin.tan@outlook.com,
fabio.porcedda@gmail.com, mhi@lists.linux.dev,
linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re:[PATCH v3] bus: mhi: host: pci_generic: Add definition for some VIDs
Date: Tue, 15 Nov 2022 14:00:10 +0800 (CST) [thread overview]
Message-ID: <38bbe02b.1790.18479dfa5ac.Coremail.slark_xiao@163.com> (raw)
In-Reply-To: <20221107112700.773-1-slark_xiao@163.com>
Hi Mani,
Any update about this patch?
At 2022-11-07 19:27:00, "Slark Xiao" <slark_xiao@163.com> wrote:
>To make code neat and for convenience purpose, add definition for some
>VIDs. Adding it locally until these VIDs are used in multiple places.
>
>Signed-off-by: Slark Xiao <slark_xiao@163.com>
>---
>v3: Update description
>v2: Update description and fix format issue
>---
> drivers/bus/mhi/host/pci_generic.c | 18 +++++++++++-------
> 1 file changed, 11 insertions(+), 7 deletions(-)
>
>diff --git a/drivers/bus/mhi/host/pci_generic.c b/drivers/bus/mhi/host/pci_generic.c
>index c4259cb2d289..3a789bb2f631 100644
>--- a/drivers/bus/mhi/host/pci_generic.c
>+++ b/drivers/bus/mhi/host/pci_generic.c
>@@ -24,6 +24,10 @@
>
> #define HEALTH_CHECK_PERIOD (HZ * 2)
>
>+/* PCI VID definitions */
>+#define PCI_VENDOR_ID_THALES 0x1269
>+#define PCI_VENDOR_ID_QUECTEL 0x1eac
>+
> /**
> * struct mhi_pci_dev_info - MHI PCI device specific information
> * @config: MHI controller configuration
>@@ -557,11 +561,11 @@ static const struct pci_device_id mhi_pci_id_table[] = {
> .driver_data = (kernel_ulong_t) &mhi_telit_fn990_info },
> { PCI_DEVICE(PCI_VENDOR_ID_QCOM, 0x0308),
> .driver_data = (kernel_ulong_t) &mhi_qcom_sdx65_info },
>- { PCI_DEVICE(0x1eac, 0x1001), /* EM120R-GL (sdx24) */
>+ { PCI_DEVICE(PCI_VENDOR_ID_QUECTEL, 0x1001), /* EM120R-GL (sdx24) */
> .driver_data = (kernel_ulong_t) &mhi_quectel_em1xx_info },
>- { PCI_DEVICE(0x1eac, 0x1002), /* EM160R-GL (sdx24) */
>+ { PCI_DEVICE(PCI_VENDOR_ID_QUECTEL, 0x1002), /* EM160R-GL (sdx24) */
> .driver_data = (kernel_ulong_t) &mhi_quectel_em1xx_info },
>- { PCI_DEVICE(0x1eac, 0x2001), /* EM120R-GL for FCCL (sdx24) */
>+ { PCI_DEVICE(PCI_VENDOR_ID_QUECTEL, 0x2001), /* EM120R-GL for FCCL (sdx24) */
> .driver_data = (kernel_ulong_t) &mhi_quectel_em1xx_info },
> /* T99W175 (sdx55), Both for eSIM and Non-eSIM */
> { PCI_DEVICE(PCI_VENDOR_ID_FOXCONN, 0xe0ab),
>@@ -585,16 +589,16 @@ static const struct pci_device_id mhi_pci_id_table[] = {
> { PCI_DEVICE(PCI_VENDOR_ID_FOXCONN, 0xe0d9),
> .driver_data = (kernel_ulong_t) &mhi_foxconn_sdx65_info },
> /* MV31-W (Cinterion) */
>- { PCI_DEVICE(0x1269, 0x00b3),
>+ { PCI_DEVICE(PCI_VENDOR_ID_THALES, 0x00b3),
> .driver_data = (kernel_ulong_t) &mhi_mv31_info },
> /* MV31-W (Cinterion), based on new baseline */
>- { PCI_DEVICE(0x1269, 0x00b4),
>+ { PCI_DEVICE(PCI_VENDOR_ID_THALES, 0x00b4),
> .driver_data = (kernel_ulong_t) &mhi_mv31_info },
> /* MV32-WA (Cinterion) */
>- { PCI_DEVICE(0x1269, 0x00ba),
>+ { PCI_DEVICE(PCI_VENDOR_ID_THALES, 0x00ba),
> .driver_data = (kernel_ulong_t) &mhi_mv32_info },
> /* MV32-WB (Cinterion) */
>- { PCI_DEVICE(0x1269, 0x00bb),
>+ { PCI_DEVICE(PCI_VENDOR_ID_THALES, 0x00bb),
> .driver_data = (kernel_ulong_t) &mhi_mv32_info },
> { }
> };
>--
>2.17.1
next prev parent reply other threads:[~2022-11-15 6:01 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-11-07 11:27 [PATCH v3] bus: mhi: host: pci_generic: Add definition for some VIDs Slark Xiao
2022-11-15 6:00 ` Slark Xiao [this message]
2022-11-16 14:40 ` Manivannan Sadhasivam
2022-11-17 11:52 ` Manivannan Sadhasivam
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=38bbe02b.1790.18479dfa5ac.Coremail.slark_xiao@163.com \
--to=slark_xiao@163.com \
--cc=dnlplm@gmail.com \
--cc=fabio.porcedda@gmail.com \
--cc=gregkh@linuxfoundation.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=loic.poulain@linaro.org \
--cc=mani@kernel.org \
--cc=mhi@lists.linux.dev \
--cc=yonglin.tan@outlook.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox