From: Wenmeng Liu <quic_wenmliu@quicinc.com>
To: Loic Poulain <loic.poulain@oss.qualcomm.com>,
Robert Foss <rfoss@kernel.org>,
Andi Shyti <andi.shyti@kernel.org>, Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konradybcio@kernel.org>,
<bryan.odonoghue@linaro.org>, <vladimir.zapolskiy@linaro.org>,
<todor.too@gmail.com>
Cc: <linux-i2c@vger.kernel.org>, <linux-arm-msm@vger.kernel.org>,
<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<linux-media@vger.kernel.org>
Subject: Re: [PATCH v2 0/3] Add CCI and imx577 sensor support for lemans evk
Date: Fri, 15 Aug 2025 15:48:47 +0800 [thread overview]
Message-ID: <3cbd4a43-22ea-4d84-a556-67d8e7e573bd@quicinc.com> (raw)
In-Reply-To: <20250815-rb8_camera-v2-0-6806242913ed@quicinc.com>
On 2025/8/15 15:07, Wenmeng Liu wrote:
> This series adds cci definition and imx577 sensor enablement
> via cci1 on lemans evk.
>
> An example media-ctl pipeline for the imx577 is:
>
> media-ctl -d /dev/media0 --reset
> media-ctl -d /dev/media0 -V '"imx577 0-001a":0[fmt:SRGGB10/4056x3040 field:none]'
> media-ctl -d /dev/media0 -V '"msm_csiphy1":0[fmt:SRGGB10/4056x3040]'
> media-ctl -d /dev/media0 -V '"msm_csid0":0[fmt:SRGGB10/4056x3040]'
> media-ctl -d /dev/media0 -V '"msm_vfe0_rdi0":0[fmt:SRGGB10/4056x3040]'
> media-ctl -d /dev/media0 -l '"msm_csiphy1":1->"msm_csid0":0[1]'
> media-ctl -d /dev/media0 -l '"msm_csid0":1->"msm_vfe0_rdi0":0[1]'
>
> yavta -B capture-mplane -n 5 -f SRGGB10P -s 4056x3040 -F /dev/video0 --capture=5
>
> Changes in V2:
> - Remove the patch that adds PHY supply documentation in the sa8775p CAMSS
> bindings. This change should be submitted together with the sa8775p bindings patch.
> - Fix the string ordering in the DTS file.
> - Remove the source clock from the CCI node.
> - Move the sensor enable configuration from lemans-evk.dts to lemans-evk-camera.dtso.
> - Remove the definitions for CCI and regulators that are not enabled.
> - Link to v1:
> https://lore.kernel.org/all/20250514-rb8_camera-v1-0-bf4a39e304e9@quicinc.com/
>
> Signed-off-by: Wenmeng Liu <quic_wenmliu@quicinc.com>
> ---
> Wenmeng Liu (3):
> dt-bindings: i2c: qcom-cci: Document sa8775p compatible
> arm64: dts: qcom: sa8775p: Add CCI definitions
> arm64: dts: qcom: lemans-evk-camera: Add DT overlay
>
> .../devicetree/bindings/i2c/qcom,i2c-cci.yaml | 2 +
> arch/arm64/boot/dts/qcom/Makefile | 4 +
> arch/arm64/boot/dts/qcom/lemans-evk-camera.dtso | 105 ++++++++
> arch/arm64/boot/dts/qcom/lemans.dtsi | 268 +++++++++++++++++++++
> 4 files changed, 379 insertions(+)
> ---
> base-commit: f0d48d68b1e7323d253068c5d4f7b470c5e927de
> change-id: 20250815-rb8_camera-877517c45388
>
> Best regards,
Lack of dependence:
This patch series depends on patch series:
https://lore.kernel.org/linux-arm-msm/20250814101615.1102795-1-quic_vikramsa@quicinc.com/
Thanks
Wenmeng
next prev parent reply other threads:[~2025-08-15 7:48 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-08-15 7:07 [PATCH v2 0/3] Add CCI and imx577 sensor support for lemans evk Wenmeng Liu
2025-08-15 7:07 ` [PATCH v2 1/3] dt-bindings: i2c: qcom-cci: Document sa8775p compatible Wenmeng Liu
2025-08-15 10:44 ` Bryan O'Donoghue
2025-08-20 20:31 ` Rob Herring (Arm)
2025-08-15 7:07 ` [PATCH v2 2/3] arm64: dts: qcom: sa8775p: Add CCI definitions Wenmeng Liu
2025-08-15 12:33 ` Bryan O'Donoghue
2025-09-08 16:09 ` Konrad Dybcio
2025-08-15 7:07 ` [PATCH v2 3/3] arm64: dts: qcom: lemans-evk-camera: Add DT overlay Wenmeng Liu
2025-08-15 8:30 ` Bryan O'Donoghue
2025-08-15 12:32 ` Bryan O'Donoghue
2025-09-08 16:14 ` Konrad Dybcio
2025-08-15 7:48 ` Wenmeng Liu [this message]
2025-10-27 22:37 ` (subset) [PATCH v2 0/3] Add CCI and imx577 sensor support for lemans evk Bjorn Andersson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3cbd4a43-22ea-4d84-a556-67d8e7e573bd@quicinc.com \
--to=quic_wenmliu@quicinc.com \
--cc=andersson@kernel.org \
--cc=andi.shyti@kernel.org \
--cc=bryan.odonoghue@linaro.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=konradybcio@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=loic.poulain@oss.qualcomm.com \
--cc=rfoss@kernel.org \
--cc=robh@kernel.org \
--cc=todor.too@gmail.com \
--cc=vladimir.zapolskiy@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox