From mboxrd@z Thu Jan 1 00:00:00 1970 Received: from mail-pg1-f176.google.com (mail-pg1-f176.google.com [209.85.215.176]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id B699633DEEB for ; Wed, 25 Feb 2026 09:46:30 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=209.85.215.176 ARC-Seal:i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1772012794; cv=none; b=sm+IX/syGanP8cuiKwsZJeb8fGx7rYabTnngo/ex1PuRh8senEhNuQTApTih76k9RkJI6xKMgRHF37Iv+qbZ6Wd3e+v2i9oqJd4f/7rOkpKggVVqS+pv63mWCwO2wgaoiaTyEqfvN526+vrmo/BaJHSVOKk3JdPTvqo8Qc/8Duk= ARC-Message-Signature:i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1772012794; c=relaxed/simple; bh=LgOOQ1unelVycebRG6Wv6VHvAe5pRW1NWzKl2nAb+40=; h=Message-ID:Date:MIME-Version:Subject:To:Cc:References:From: In-Reply-To:Content-Type; b=W9Y3G6ollTNEway0/gp4BC5JMlq553UwwirQfuH/C4GUxrKLr3DOUyrTXWpTZ7H0AIAyQA8tkEtSwZ8xBEzTCdVCtZeTVe77NCwMbBOQY/km3KeMC4K2VAfHdNJEpyGI9ez6SIcLK9NI9CGH6KW0Epq4XsrSTclPmCI37H4Vyfk= ARC-Authentication-Results:i=1; smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=gmail.com; spf=pass smtp.mailfrom=gmail.com; dkim=pass (2048-bit key) header.d=gmail.com header.i=@gmail.com header.b=AxmytCm7; arc=none smtp.client-ip=209.85.215.176 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=gmail.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=gmail.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=gmail.com header.i=@gmail.com header.b="AxmytCm7" Received: by mail-pg1-f176.google.com with SMTP id 41be03b00d2f7-c6e2355739dso2278239a12.2 for ; Wed, 25 Feb 2026 01:46:30 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20230601; t=1772012790; x=1772617590; darn=vger.kernel.org; h=content-transfer-encoding:in-reply-to:from:content-language :references:cc:to:subject:user-agent:mime-version:date:message-id :from:to:cc:subject:date:message-id:reply-to; bh=k7W7RfSXJ0xVHwN/LFWgrQ8/V7oEbH/X5Pqc6cH7moA=; b=AxmytCm74XsVMU4o9ABGXo69yQFiXKHIHCcoyJNiDHi3Tuau9+vVy9GQF6sNdTlxmU fvxKzqfSBLQOnjs/xf99d3CtzSUDQHTUD+9jSd2xrtyUGlRReiTeUFOtqPtW05ZVEL2d lzrlgB+lN2QyiBw9GRxeIML0y8BcjTscXoD+FgdPhg3N/4KSEb9wZ/vH+KVIFXuiBnYU jfVmgMWuwjhBsENO+oDp3Y5QS+sfBTuWqHjQkoyXp1GU1Q52qtfXn8bI0uAJSw91LrdH RAf8J4i5G5O3EqP5zjhJcu1VFZ9UxhB+v+hQTYioH/PV7pMSwJgzdmJRptPAyJaJAmWp Kfxw== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20230601; t=1772012790; x=1772617590; h=content-transfer-encoding:in-reply-to:from:content-language :references:cc:to:subject:user-agent:mime-version:date:message-id :x-gm-gg:x-gm-message-state:from:to:cc:subject:date:message-id :reply-to; bh=k7W7RfSXJ0xVHwN/LFWgrQ8/V7oEbH/X5Pqc6cH7moA=; b=iVrpPBqXxz/VI+i2KxNcwijJsFHUqoFyzcYQuhdGFz2vpkrJocVcLOcVCEiYQW48W4 kGDMXL1kwMmGrjhbfAIb8iYJj/Hcw3j4Iyv0T6c7emDWbYpIcfrOuLjvnyAYX9ZOnlXp xhLeoaMCKEADDb42YyFr0ojmt37HruG2KzzhCgjHlZnJMSmAYVgAu7NEHYIfMln6qQSq nISx/EPtVFwdmDpvJRvVZR3oSZ8sjcDbVtVF9GsUmpf4NUkoXFMXZhDAPFlBt661lXjF UlG3aXyCUAHp5Oz77Ku9WIsjCYge6HCQQdrpZYfxuYXCRSkSa8xvGRhCktl7nTNprD4b 2ohA== X-Forwarded-Encrypted: i=1; AJvYcCXYDZLUOi1U5mWGoKkHBVbgZemJuADiledcDBCBI3yyNVpRp4Hml9wzY7lYkh7HfjjxFurp3xEVPfiA/rsM@vger.kernel.org X-Gm-Message-State: AOJu0Yzot+zc1wPho+W75fqwufQLerRtlxPRroJ8EgbZSya/qjQSbP3K dXP1KBEi3wT5cF5ieQYt8/zAoQXyvFMWcGz5M1+qxNV79ATO9sJ/Q9/P X-Gm-Gg: ATEYQzx55BmylMorH9IqmVeKCfgeYKJadgq5YWGHxOLaSCt6iouMi4pGx2czaVFV6bu ldwoijZUAhg2ry5YVn31S6LSHDZdggfJlGKSbu5waqOVDNMRvjXhMCXnFzvgH3yM9SITQQU7P8Q XhbT0b2F4OiixXk1bEpFSmo78CSMMQGNiMYBZAVQQGkMWG7BlArxeBO1/AUn9Heq6RnFt9m3juG nn31P9lGEliC0ZZsF6bbx2d42WF0t3eYrlh+8Z0mfhBncyBYcv2+4w8WwJJpYZuImJwBvx2QdPx EPhw9tPJy9C0KDSNeP2lcuAm/2jmI/AYVfKz2VDtSTIy5Rr56No3eQSZkNnscmozVpIntxHOWnT 4iPYTBjSqvu42EN+C2HwzDLL0118wVfNol3Oj4NoqvhqWZkDLoW8yKpawm76qRp4PgPQfaGuwV7 jHFGPPsGnT42wN28JyogkR5TyDJVsBQVQ+KH/NoSS9VkCt4Q== X-Received: by 2002:a17:90b:3ccd:b0:34c:2f3f:d27e with SMTP id 98e67ed59e1d1-358ae7c4d50mr13886884a91.3.1772012789778; Wed, 25 Feb 2026 01:46:29 -0800 (PST) Received: from [172.16.20.12] ([136.226.253.21]) by smtp.gmail.com with ESMTPSA id 98e67ed59e1d1-35901880830sm3083484a91.5.2026.02.25.01.46.15 (version=TLS1_3 cipher=TLS_AES_128_GCM_SHA256 bits=128/128); Wed, 25 Feb 2026 01:46:29 -0800 (PST) Message-ID: <3e1ac349-bbed-415b-89e4-6f9b13c15804@gmail.com> Date: Wed, 25 Feb 2026 15:16:41 +0530 Precedence: bulk X-Mailing-List: linux-arm-msm@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 User-Agent: Mozilla Thunderbird Subject: Re: [PATCH v14 3/3] arm64: dts: qcom: talos-evk: Add support for QCS615 talos evk board To: Jie Gan , andersson@kernel.org, konradybcio@kernel.org Cc: robh@kernel.org, krzk+dt@kernel.org, conor+dt@kernel.org, linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Dmitry Baryshkov , Konrad Dybcio References: <20260217103749.1249718-1-tessolveupstream@gmail.com> <20260217103749.1249718-4-tessolveupstream@gmail.com> <13f9e693-9426-42d5-acc2-eada40d95953@oss.qualcomm.com> Content-Language: en-US From: tessolveupstream@gmail.com In-Reply-To: <13f9e693-9426-42d5-acc2-eada40d95953@oss.qualcomm.com> Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit On 24-02-2026 11:34, Jie Gan wrote: > > > On 2/17/2026 6:37 PM, Sudarshan Shetty wrote: >> Add the device tree for the QCS615-based Talos EVK platform. The >> platform is composed of a System-on-Module following the SMARC >> standard, and a Carrier Board. >> >> The Carrier Board supports several display configurations, HDMI and >> LVDS. Both configurations use the same base hardware, with the display >> selection controlled by a DIP switch. >> >> Use a DTBO file, talos-evk-lvds-auo,g133han01.dtso, which defines an >> overlay that disables HDMI and adds LVDS. The DTs file talos-evk >> can describe the HDMI display configurations. >> >> According to the hardware design and vendor guidance, the WiFi PA >> supplies VDD_PA_A and VDD_PA_B only need to be enabled at the same time >> as asserting WLAN_EN. >> >> On this platform, WiFi enablement is controlled via the WLAN_EN GPIO >> (GPIO84), which also drives the VDD_PA_A and VDD_PA_B power enables. >> Remove the VDD_PA_A and VDD_PA_B regulator nodes from the device tree >> and rely on WLAN_EN to enable WiFi functionality. >> >> Add talos-evk-usb1-peripheral.dtso overlay to enable USB0 peripheral >> (EDL) mode. The base DTS will keep USB0 host-only due to hardware >> routing through the EDL DIP switch, and the overlay switches the >> configuration for device-mode operation. >> >> The initial device tree includes support for: >> - CPU and memory >> - UART >> - GPIOs >> - Regulators >> - PMIC >> - Early console >> - AT24MAC602 EEPROM >> - MCP2515 SPI to CAN >> - ADV7535 DSI-to-HDMI bridge >> - DisplayPort interface >> - SN65DSI84ZXHR DSI-to-LVDS bridge >> - Wi-Fi/BT >> >> Reviewed-by: Dmitry Baryshkov >> Reviewed-by: Konrad Dybcio >> Signed-off-by: Sudarshan Shetty >> --- >>   arch/arm64/boot/dts/qcom/Makefile             |   6 + >>   .../qcom/talos-evk-lvds-auo,g133han01.dtso    | 131 ++++ >>   arch/arm64/boot/dts/qcom/talos-evk-som.dtsi   | 614 ++++++++++++++++++ >>   .../dts/qcom/talos-evk-usb1-peripheral.dtso   |  10 + >>   arch/arm64/boot/dts/qcom/talos-evk.dts        | 139 ++++ >>   5 files changed, 900 insertions(+) >>   create mode 100644 arch/arm64/boot/dts/qcom/talos-evk-lvds-auo,g133han01.dtso >>   create mode 100644 arch/arm64/boot/dts/qcom/talos-evk-som.dtsi >>   create mode 100644 arch/arm64/boot/dts/qcom/talos-evk-usb1-peripheral.dtso >>   create mode 100644 arch/arm64/boot/dts/qcom/talos-evk.dts >> >> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile >> index 76cf0115a00a..9b18ec342eae 100644 >> --- a/arch/arm64/boot/dts/qcom/Makefile >> +++ b/arch/arm64/boot/dts/qcom/Makefile >> @@ -324,6 +324,12 @@ dtb-$(CONFIG_ARCH_QCOM)    += sm8650-mtp.dtb >>   dtb-$(CONFIG_ARCH_QCOM)    += sm8650-qrd.dtb >>   dtb-$(CONFIG_ARCH_QCOM)    += sm8750-mtp.dtb >>   dtb-$(CONFIG_ARCH_QCOM)    += sm8750-qrd.dtb >> +dtb-$(CONFIG_ARCH_QCOM)    += talos-evk.dtb >> +talos-evk-usb1-peripheral-dtbs := talos-evk.dtb talos-evk-usb1-peripheral.dtbo >> +dtb-$(CONFIG_ARCH_QCOM) += talos-evk-usb1-peripheral.dtb >> +talos-evk-lvds-auo,g133han01-dtbs    := \ >> +    talos-evk.dtb talos-evk-lvds-auo,g133han01.dtbo >> +dtb-$(CONFIG_ARCH_QCOM)    += talos-evk-lvds-auo,g133han01.dtb >>   x1e001de-devkit-el2-dtbs    := x1e001de-devkit.dtb x1-el2.dtbo >>   dtb-$(CONFIG_ARCH_QCOM)    += x1e001de-devkit.dtb x1e001de-devkit-el2.dtb >>   x1e78100-lenovo-thinkpad-t14s-el2-dtbs    := x1e78100-lenovo-thinkpad-t14s.dtb x1-el2.dtbo >> diff --git a/arch/arm64/boot/dts/qcom/talos-evk-lvds-auo,g133han01.dtso b/arch/arm64/boot/dts/qcom/talos-evk-lvds-auo,g133han01.dtso >> new file mode 100644 >> index 000000000000..884df2d4f4e1 >> --- /dev/null >> +++ b/arch/arm64/boot/dts/qcom/talos-evk-lvds-auo,g133han01.dtso > > Found warnings with command: > make -j99 ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- CHECK_DTBS=y W=1 qcom/talos-evk-lvds-auo,g133han01.dtb > >   DTC [C] arch/arm64/boot/dts/qcom/talos-evk.dtb >   DTC     arch/arm64/boot/dts/qcom/talos-evk-lvds-auo,g133han01.dtbo > arch/arm64/boot/dts/qcom/talos-evk-lvds-auo,g133han01.dtso:71.3-16: Warning (reg_format): /fragment@2/__overlay__/bridge@2c:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1) > arch/arm64/boot/dts/qcom/talos-evk-lvds-auo,g133han01.dtso:65.25-67.4: Warning (unit_address_vs_reg): /fragment@2/__overlay__/bridge@3d: node has a unit name, but no reg or ranges property > arch/arm64/boot/dts/qcom/talos-evk-lvds-auo,g133han01.dtbo: Warning (pci_device_reg): Failed prerequisite 'reg_format' > arch/arm64/boot/dts/qcom/talos-evk-lvds-auo,g133han01.dtbo: Warning (pci_device_bus_num): Failed prerequisite 'reg_format' > arch/arm64/boot/dts/qcom/talos-evk-lvds-auo,g133han01.dtbo: Warning (simple_bus_reg): Failed prerequisite 'reg_format' > arch/arm64/boot/dts/qcom/talos-evk-lvds-auo,g133han01.dtbo: Warning (i2c_bus_reg): Failed prerequisite 'reg_format' > arch/arm64/boot/dts/qcom/talos-evk-lvds-auo,g133han01.dtbo: Warning (spi_bus_reg): Failed prerequisite 'reg_format' > arch/arm64/boot/dts/qcom/talos-evk-lvds-auo,g133han01.dtso:69.25-105.4: Warning (avoid_default_addr_size): /fragment@2/__overlay__/bridge@2c: Relying on default #address-cells value > arch/arm64/boot/dts/qcom/talos-evk-lvds-auo,g133han01.dtso:69.25-105.4: Warning (avoid_default_addr_size): /fragment@2/__overlay__/bridge@2c: Relying on default #size-cells value > arch/arm64/boot/dts/qcom/talos-evk-lvds-auo,g133han01.dtbo: Warning (avoid_unnecessary_addr_size): Failed prerequisite 'avoid_default_addr_size' > arch/arm64/boot/dts/qcom/talos-evk-lvds-auo,g133han01.dtbo: Warning (unique_unit_address_if_enabled): Failed prerequisite 'avoid_default_addr_size' > arch/arm64/boot/dts/qcom/talos.dtsi:1964.20-1999.5: Warning (simple_bus_reg): /soc@0/gmu@506a000: simple-bus unit address format error, expected "506d000" Thank you for pointing this out and for sharing the build warnings. I will review the reported DT issues, verify the root causes, and address them accordingly. The fixes will be included in the next revision of the patch series. > arch/arm64/boot/dts/qcom/talos.dtsi:4441.27-4504.6: Warning (avoid_unnecessary_addr_size): /soc@0/display-subsystem@ae00000/dsi@ae94000: unnecessary #address-cells/#size-cells without "ranges", "dma-ranges" or child "reg" or "ranges" property >   also defined at arch/arm64/boot/dts/qcom/talos-evk-som.dtsi:350.12-353.3 > /local/mnt/workspace/virtualWorkspace/code/qcom-linux/linus-branch/arch/arm64/boot/dts/qcom/talos-evk.dtb: psci: 'reboot-mode' does not match any of the regexes: '^power-domain-', 'pinctrl-[0-9]+' I rechecked this 'psci: 'reboot-mode' does not match any of the regexes' issue on my side using linux-next tag 'next-20260223', but I was not able to reproduce the reported error. Could you please share the exact tree/commit and configuration you used for the build? I would like to align my environment and investigate this further. >         from schema $id: http://devicetree.org/schemas/arm/psci.yaml# > /local/mnt/workspace/virtualWorkspace/code/qcom-linux/linus-branch/arch/arm64/boot/dts/qcom/talos-evk.dtb: clock-controller@100000: 'clock-names' is a required property The missing clock-names property issue is already being addressed by the following patch: https://lore.kernel.org/linux-arm-msm/e025b1b4-8f5c-4fd2-853e-56b89f1f8e79@oss.qualcomm.com/ I will reference this dependency in the next revision of my patch series (commit notes)to ensure the build and schema checks are aligned. >         from schema $id: http://devicetree.org/schemas/clock/qcom,qcs615-gcc.yaml# > /local/mnt/workspace/virtualWorkspace/code/qcom-linux/linus-branch/arch/arm64/boot/dts/qcom/talos-evk.dtb: remoteproc@8300000: Unevaluated properties are not allowed ('cooling' was unexpected) >         from schema $id: http://devicetree.org/schemas/remoteproc/qcom,sm8150-pas.yaml# > arch/arm64/boot/dts/qcom/talos-evk.dtb: /soc@0/remoteproc@8300000/cooling: failed to match any schema with compatible: ['qcom,qmi-cooling-cdsp'] I rechecked the 'Unevaluated properties are not allowed ('cooling' was unexpected)' issue locally using linux-next tag 'next-20260223', but I was not able to reproduce this issue. Additionally, I am not introducing or modifying any cooling-related nodes in my DTS/DT overlay.The cooling property appears to originate from the base talos.dtsi, and is not touched or referenced by my patch series. >   OVL [C] arch/arm64/boot/dts/qcom/talos-evk-lvds-auo,g133han01.dtb > /local/mnt/workspace/virtualWorkspace/code/qcom-linux/linus-branch/arch/arm64/boot/dts/qcom/talos-evk-lvds-auo,g133han01.dtb: backlight: gpios: [[71, 59, 0], [71, 115, 0]] is too long >         from schema $id: http://devicetree.org/schemas/leds/backlight/gpio-backlight.yaml# > /local/mnt/workspace/virtualWorkspace/code/qcom-linux/linus-branch/arch/arm64/boot/dts/qcom/talos-evk-lvds-auo,g133han01.dtb: psci: 'reboot-mode' does not match any of the regexes: '^power-domain-', 'pinctrl-[0-9]+' >         from schema $id: http://devicetree.org/schemas/arm/psci.yaml# > /local/mnt/workspace/virtualWorkspace/code/qcom-linux/linus-branch/arch/arm64/boot/dts/qcom/talos-evk-lvds-auo,g133han01.dtb: clock-controller@100000: 'clock-names' is a required property >         from schema $id: http://devicetree.org/schemas/clock/qcom,qcs615-gcc.yaml# > /local/mnt/workspace/virtualWorkspace/code/qcom-linux/linus-branch/arch/arm64/boot/dts/qcom/talos-evk-lvds-auo,g133han01.dtb: remoteproc@8300000: Unevaluated properties are not allowed ('cooling' was unexpected) >         from schema $id: http://devicetree.org/schemas/remoteproc/qcom,sm8150-pas.yaml# > arch/arm64/boot/dts/qcom/talos-evk-lvds-auo,g133han01.dtb: /soc@0/remoteproc@8300000/cooling: failed to match any schema with compatible: ['qcom,qmi-cooling-cdsp'] > > Thanks, > Jie > >> @@ -0,0 +1,131 @@ >> +// SPDX-License-Identifier: BSD-3-Clause >> +/* >> + * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries. >> + */ >> +/dts-v1/; >> +/plugin/; >> + >> +#include >> + >> +&{/} { >> +    backlight: backlight { >> +        compatible = "gpio-backlight"; >> +        gpios = <&tlmm 59 GPIO_ACTIVE_HIGH>, >> +            <&tlmm 115 GPIO_ACTIVE_HIGH>; >> +        default-on; >> +    }; >> + >> +    panel-lvds { >> +        compatible = "auo,g133han01"; >> +        power-supply = <&vreg_v3p3>; >> + >> +        ports { >> +            #address-cells = <1>; >> +            #size-cells = <0>; >> + >> +            /* LVDS A (Odd pixels) */ >> +            port@0 { >> +                reg = <0>; >> +                dual-lvds-odd-pixels; >> + >> +                lvds_panel_out_a: endpoint { >> +                    remote-endpoint = <&sn65dsi84_out_a>; >> +                }; >> +            }; >> + >> +            /* LVDS B (Even pixels) */ >> +            port@1 { >> +                reg = <1>; >> +                dual-lvds-even-pixels; >> + >> +                lvds_panel_out_b: endpoint { >> +                    remote-endpoint = <&sn65dsi84_out_b>; >> +                }; >> +            }; >> +        }; >> +    }; >> + >> +    vreg_v3p3: regulator-v3p3 { >> +        compatible = "regulator-fixed"; >> +        regulator-name = "vdd-3v3"; >> +        regulator-min-microvolt = <3300000>; >> +        regulator-max-microvolt = <3300000>; >> +    }; >> +}; >> + >> +&hdmi_connector { >> +    status = "disabled"; >> +}; >> + >> +&i2c1 { >> +    clock-frequency = <400000>; >> + >> +    status = "okay"; >> + >> +    hdmi_bridge: bridge@3d { >> +        status = "disabled"; >> +    }; >> + >> +    lvds_bridge: bridge@2c { >> +        compatible = "ti,sn65dsi84"; >> +        reg = <0x2c>; >> +        enable-gpios = <&tlmm 42 GPIO_ACTIVE_HIGH>; >> + >> +        ports { >> +            #address-cells = <1>; >> +            #size-cells = <0>; >> + >> +            port@0 { >> +                reg = <0>; >> + >> +                sn65dsi84_in: endpoint { >> +                    data-lanes = <1 2 3 4>; >> +                    remote-endpoint = <&mdss_dsi0_out>; >> +                }; >> +            }; >> + >> +            port@2 { >> +                reg = <2>; >> + >> +                sn65dsi84_out_a: endpoint { >> +                    data-lanes = <1 2 3 4>; >> +                    remote-endpoint = <&lvds_panel_out_a>; >> +                }; >> +            }; >> + >> +            port@3 { >> +                reg = <3>; >> + >> +                sn65dsi84_out_b: endpoint { >> +                    data-lanes = <1 2 3 4>; >> +                    remote-endpoint = <&lvds_panel_out_b>; >> +                }; >> +            }; >> +        }; >> +    }; >> +}; >> + >> +&mdss_dsi0 { >> +    vdda-supply = <&vreg_l11a>; >> + >> +    status = "okay"; >> +}; >> + >> +&mdss_dsi0_out { >> +    remote-endpoint = <&sn65dsi84_in>; >> +    data-lanes = <0 1 2 3>; >> +}; >> + >> +&tlmm { >> +    lcd_bklt_en: lcd-bklt-en-state { >> +        pins = "gpio115"; >> +        function = "gpio"; >> +        bias-disable; >> +    }; >> + >> +    lcd_bklt_pwm: lcd-bklt-pwm-state { >> +        pins = "gpio59"; >> +        function = "gpio"; >> +        bias-disable; >> +    }; >> +}; >> diff --git a/arch/arm64/boot/dts/qcom/talos-evk-som.dtsi b/arch/arm64/boot/dts/qcom/talos-evk-som.dtsi >> new file mode 100644 >> index 000000000000..e57dc370c4e4 >> --- /dev/null >> +++ b/arch/arm64/boot/dts/qcom/talos-evk-som.dtsi >> @@ -0,0 +1,614 @@ >> +// SPDX-License-Identifier: BSD-3-Clause >> +/* >> + * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries. >> + */ >> +/dts-v1/; >> + >> +#include >> +#include >> +#include "talos.dtsi" >> +#include "pm8150.dtsi" >> +/ { >> +    aliases { >> +        i2c1 = &i2c1; >> +        i2c5 = &i2c5; >> +        mmc0 = &sdhc_1; >> +        serial0 = &uart0; >> +        serial1 = &uart7; >> +        spi6 = &spi6; >> +    }; >> + >> +    chosen { >> +        stdout-path = "serial0:115200n8"; >> +    }; >> + >> +    clocks { >> +        can_osc: can-oscillator { >> +            compatible = "fixed-clock"; >> +            clock-frequency = <20000000>; >> +            #clock-cells = <0>; >> +        }; >> + >> +        sleep_clk: sleep-clk { >> +            compatible = "fixed-clock"; >> +            clock-frequency = <32764>; >> +            #clock-cells = <0>; >> +        }; >> + >> +        xo_board_clk: xo-board-clk { >> +            compatible = "fixed-clock"; >> +            clock-frequency = <38400000>; >> +            #clock-cells = <0>; >> +        }; >> +    }; >> + >> +    regulator-usb2-vbus { >> +        compatible = "regulator-fixed"; >> +        regulator-name = "USB2_VBUS"; >> +        gpio = <&pm8150_gpios 10 GPIO_ACTIVE_HIGH>; >> +        pinctrl-0 = <&usb2_en>; >> +        pinctrl-names = "default"; >> +        enable-active-high; >> +        regulator-always-on; >> +    }; >> + >> +    vreg_conn_1p8: regulator-conn-1p8 { >> +        compatible = "regulator-fixed"; >> +        regulator-name = "vreg_conn_1p8"; >> +        startup-delay-us = <4000>; >> +        enable-active-high; >> +        gpio = <&pm8150_gpios 1 GPIO_ACTIVE_HIGH>; >> +    }; >> + >> +    vreg_conn_pa: regulator-conn-pa { >> +        compatible = "regulator-fixed"; >> +        regulator-name = "vreg_conn_pa"; >> +        startup-delay-us = <4000>; >> +        enable-active-high; >> +        gpio = <&pm8150_gpios 6 GPIO_ACTIVE_HIGH>; >> +    }; >> + >> +    vreg_v3p3_can: regulator-v3p3-can { >> +        compatible = "regulator-fixed"; >> +        regulator-name = "vreg-v3p3-can"; >> +        regulator-min-microvolt = <3300000>; >> +        regulator-max-microvolt = <3300000>; >> +        regulator-boot-on; >> +        regulator-always-on; >> +    }; >> + >> +    vreg_v5p0_can: regulator-v5p0-can { >> +        compatible = "regulator-fixed"; >> +        regulator-name = "vreg-v5p0-can"; >> +        regulator-min-microvolt = <5000000>; >> +        regulator-max-microvolt = <5000000>; >> +        regulator-boot-on; >> +        regulator-always-on; >> +    }; >> + >> +    wcn6855-pmu { >> +        compatible = "qcom,wcn6855-pmu"; >> + >> +        pinctrl-0 = <&bt_en_state>, <&wlan_en_state>; >> +        pinctrl-names = "default"; >> + >> +        bt-enable-gpios = <&tlmm 85 GPIO_ACTIVE_HIGH>; >> +        wlan-enable-gpios = <&tlmm 84 GPIO_ACTIVE_HIGH>; >> + >> +        vddio-supply = <&vreg_conn_pa>; >> +        vddaon-supply = <&vreg_s5a>; >> +        vddpmu-supply = <&vreg_conn_1p8>; >> +        vddpmumx-supply = <&vreg_conn_1p8>; >> +        vddpmucx-supply = <&vreg_conn_pa>; >> +        vddrfa0p95-supply = <&vreg_s5a>; >> +        vddrfa1p3-supply = <&vreg_s6a>; >> +        vddrfa1p9-supply = <&vreg_l15a>; >> +        vddpcie1p3-supply = <&vreg_s6a>; >> +        vddpcie1p9-supply = <&vreg_l15a>; >> + >> +        regulators { >> +            vreg_pmu_rfa_cmn: ldo0 { >> +                regulator-name = "vreg_pmu_rfa_cmn"; >> +            }; >> + >> +            vreg_pmu_aon_0p59: ldo1 { >> +                regulator-name = "vreg_pmu_aon_0p59"; >> +            }; >> + >> +            vreg_pmu_wlcx_0p8: ldo2 { >> +                regulator-name = "vreg_pmu_wlcx_0p8"; >> +            }; >> + >> +            vreg_pmu_wlmx_0p85: ldo3 { >> +                regulator-name = "vreg_pmu_wlmx_0p85"; >> +            }; >> + >> +            vreg_pmu_btcmx_0p85: ldo4 { >> +                regulator-name = "vreg_pmu_btcmx_0p85"; >> +            }; >> + >> +            vreg_pmu_rfa_0p8: ldo5 { >> +                regulator-name = "vreg_pmu_rfa_0p8"; >> +            }; >> + >> +            vreg_pmu_rfa_1p2: ldo6 { >> +                regulator-name = "vreg_pmu_rfa_1p2"; >> +            }; >> + >> +            vreg_pmu_rfa_1p7: ldo7 { >> +                regulator-name = "vreg_pmu_rfa_1p7"; >> +            }; >> + >> +            vreg_pmu_pcie_0p9: ldo8 { >> +                regulator-name = "vreg_pmu_pcie_0p9"; >> +            }; >> + >> +            vreg_pmu_pcie_1p8: ldo9 { >> +                regulator-name = "vreg_pmu_pcie_1p8"; >> +            }; >> +        }; >> +    }; >> +}; >> + >> +&apps_rsc { >> +    regulators-0 { >> +        compatible = "qcom,pm8150-rpmh-regulators"; >> +        qcom,pmic-id = "a"; >> + >> +        vreg_s3a: smps3 { >> +            regulator-name = "vreg_s3a"; >> +            regulator-min-microvolt = <600000>; >> +            regulator-max-microvolt = <650000>; >> +            regulator-initial-mode = ; >> +        }; >> + >> +        vreg_s4a: smps4 { >> +            regulator-name = "vreg_s4a"; >> +            regulator-min-microvolt = <1800000>; >> +            regulator-max-microvolt = <1829000>; >> +            regulator-initial-mode = ; >> +        }; >> + >> +        vreg_s5a: smps5 { >> +            regulator-name = "vreg_s5a"; >> +            regulator-min-microvolt = <1896000>; >> +            regulator-max-microvolt = <2040000>; >> +            regulator-initial-mode = ; >> +        }; >> + >> +        vreg_s6a: smps6 { >> +            regulator-name = "vreg_s6a"; >> +            regulator-min-microvolt = <1304000>; >> +            regulator-max-microvolt = <1404000>; >> +            regulator-initial-mode = ; >> +        }; >> + >> +        vreg_l1a: ldo1 { >> +            regulator-name = "vreg_l1a"; >> +            regulator-min-microvolt = <488000>; >> +            regulator-max-microvolt = <852000>; >> +            regulator-initial-mode = ; >> +            regulator-allow-set-load; >> +            regulator-allowed-modes = > +                           RPMH_REGULATOR_MODE_HPM>; >> +        }; >> + >> +        vreg_l2a: ldo2 { >> +            regulator-name = "vreg_l2a"; >> +            regulator-min-microvolt = <1650000>; >> +            regulator-max-microvolt = <3100000>; >> +            regulator-initial-mode = ; >> +            regulator-allow-set-load; >> +            regulator-allowed-modes = > +                           RPMH_REGULATOR_MODE_HPM>; >> +        }; >> + >> +        vreg_l3a: ldo3 { >> +            regulator-name = "vreg_l3a"; >> +            regulator-min-microvolt = <1000000>; >> +            regulator-max-microvolt = <1248000>; >> +            regulator-initial-mode = ; >> +            regulator-allow-set-load; >> +            regulator-allowed-modes = > +                           RPMH_REGULATOR_MODE_HPM>; >> +        }; >> + >> +        vreg_l5a: ldo5 { >> +            regulator-name = "vreg_l5a"; >> +            regulator-min-microvolt = <875000>; >> +            regulator-max-microvolt = <975000>; >> +            regulator-initial-mode = ; >> +            regulator-allow-set-load; >> +            regulator-allowed-modes = > +                           RPMH_REGULATOR_MODE_HPM>; >> +        }; >> + >> +        vreg_l7a: ldo7 { >> +            regulator-name = "vreg_l7a"; >> +            regulator-min-microvolt = <1800000>; >> +            regulator-max-microvolt = <1900000>; >> +            regulator-initial-mode = ; >> +            regulator-allow-set-load; >> +            regulator-allowed-modes = > +                           RPMH_REGULATOR_MODE_HPM>; >> +        }; >> + >> +        vreg_l8a: ldo8 { >> +            regulator-name = "vreg_l8a"; >> +            regulator-min-microvolt = <1150000>; >> +            regulator-max-microvolt = <1350000>; >> +            regulator-initial-mode = ; >> +            regulator-allow-set-load; >> +            regulator-allowed-modes = > +                           RPMH_REGULATOR_MODE_HPM>; >> +        }; >> + >> +        vreg_l10a: ldo10 { >> +            regulator-name = "vreg_l10a"; >> +            regulator-min-microvolt = <2950000>; >> +            regulator-max-microvolt = <3312000>; >> +            regulator-initial-mode = ; >> +            regulator-allow-set-load; >> +            regulator-allowed-modes = > +                           RPMH_REGULATOR_MODE_HPM>; >> +        }; >> + >> +        vreg_l11a: ldo11 { >> +            regulator-name = "vreg_l11a"; >> +            regulator-min-microvolt = <1232000>; >> +            regulator-max-microvolt = <1260000>; >> +            regulator-initial-mode = ; >> +            regulator-allow-set-load; >> +            regulator-allowed-modes = > +                           RPMH_REGULATOR_MODE_HPM>; >> +        }; >> + >> +        vreg_l12a: ldo12 { >> +            regulator-name = "vreg_l12a"; >> +            regulator-min-microvolt = <1800000>; >> +            regulator-max-microvolt = <1890000>; >> +            regulator-initial-mode = ; >> +        }; >> + >> +        vreg_l13a: ldo13 { >> +            regulator-name = "vreg_l13a"; >> +            regulator-min-microvolt = <3000000>; >> +            regulator-max-microvolt = <3230000>; >> +            regulator-initial-mode = ; >> +            regulator-allow-set-load; >> +            regulator-allowed-modes = > +                           RPMH_REGULATOR_MODE_HPM>; >> +        }; >> + >> +        vreg_l15a: ldo15 { >> +            regulator-name = "vreg_l15a"; >> +            regulator-min-microvolt = <1800000>; >> +            regulator-max-microvolt = <1904000>; >> +            regulator-initial-mode = ; >> +            regulator-allow-set-load; >> +            regulator-allowed-modes = > +                           RPMH_REGULATOR_MODE_HPM>; >> +        }; >> + >> +        vreg_l16a: ldo16 { >> +            regulator-name = "vreg_l16a"; >> +            regulator-min-microvolt = <3000000>; >> +            regulator-max-microvolt = <3312000>; >> +            regulator-initial-mode = ; >> +            regulator-allow-set-load; >> +            regulator-allowed-modes = > +                           RPMH_REGULATOR_MODE_HPM>; >> +        }; >> + >> +        vreg_l17a: ldo17 { >> +            regulator-name = "vreg_l17a"; >> +            regulator-min-microvolt = <2950000>; >> +            regulator-max-microvolt = <3312000>; >> +            regulator-initial-mode = ; >> +        }; >> +    }; >> +}; >> + >> +&gpi_dma0 { >> +    status = "okay"; >> +}; >> + >> +&gpi_dma1 { >> +    status = "okay"; >> +}; >> + >> +&i2c5 { >> +    clock-frequency = <400000>; >> +    status = "okay"; >> + >> +    eeprom@57 { >> +        compatible = "atmel,24c02"; >> +        reg = <0x57>; >> +        pagesize = <16>; >> +    }; >> + >> +    eeprom@5f { >> +        compatible = "atmel,24mac602"; >> +        reg = <0x5f>; >> +        pagesize = <16>; >> +    }; >> +}; >> + >> +&mdss { >> +    status = "okay"; >> +}; >> + >> +&mdss_dp0 { >> +    status = "okay"; >> +}; >> + >> +&mdss_dp0_out { >> +    link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000>; >> +    remote-endpoint = <&dp0_connector_in>; >> +}; >> + >> +&mdss_dsi0 { >> +    vdda-supply = <&vreg_l11a>; >> +    status = "okay"; >> +}; >> + >> +&mdss_dsi0_phy { >> +    vcca-supply = <&vreg_l5a>; >> +    status = "okay"; >> +}; >> + >> +&pcie { >> +    perst-gpios = <&tlmm 89 GPIO_ACTIVE_LOW>; >> +    wake-gpios = <&tlmm 100 GPIO_ACTIVE_HIGH>; >> + >> +    pinctrl-0 = <&pcie_default_state>; >> +    pinctrl-names = "default"; >> + >> +    status = "okay"; >> +}; >> + >> +&pcie_phy { >> +    vdda-phy-supply = <&vreg_l5a>; >> +    vdda-pll-supply = <&vreg_l12a>; >> + >> +    status = "okay"; >> +}; >> + >> +&pcie_port0 { >> +    wifi@0 { >> +        compatible = "pci17cb,1103"; >> +        reg = <0x10000 0x0 0x0 0x0 0x0>; >> + >> +        qcom,calibration-variant = "QC_QCS615_Ride"; >> + >> +        vddrfacmn-supply = <&vreg_pmu_rfa_cmn>; >> +        vddaon-supply = <&vreg_pmu_aon_0p59>; >> +        vddwlcx-supply = <&vreg_pmu_wlcx_0p8>; >> +        vddwlmx-supply = <&vreg_pmu_wlmx_0p85>; >> +        vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>; >> +        vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>; >> +        vddrfa1p8-supply = <&vreg_pmu_rfa_1p7>; >> +        vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>; >> +        vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>; >> +    }; >> +}; >> + >> +&pm8150_gpios { >> +    usb2_en: usb2-en-state { >> +        pins = "gpio10"; >> +        function = "normal"; >> +        output-enable; >> +        power-source = <0>; >> +    }; >> +}; >> + >> +&qupv3_id_0 { >> +    status = "okay"; >> +}; >> + >> +&qupv3_id_1 { >> +    status = "okay"; >> +}; >> + >> +&remoteproc_adsp { >> +    firmware-name = "qcom/qcs615/adsp.mbn"; >> + >> +    status = "okay"; >> +}; >> + >> +&remoteproc_cdsp { >> +    firmware-name = "qcom/qcs615/cdsp.mbn"; >> + >> +    status = "okay"; >> +}; >> + >> +&sdhc_1 { >> +    pinctrl-0 = <&sdc1_state_on>; >> +    pinctrl-1 = <&sdc1_state_off>; >> +    pinctrl-names = "default", "sleep"; >> + >> +    bus-width = <8>; >> +    mmc-ddr-1_8v; >> +    mmc-hs200-1_8v; >> +    mmc-hs400-1_8v; >> +    mmc-hs400-enhanced-strobe; >> +    vmmc-supply = <&vreg_l17a>; >> +    vqmmc-supply = <&vreg_s4a>; >> + >> +    non-removable; >> +    no-sd; >> +    no-sdio; >> + >> +    status = "okay"; >> +}; >> + >> +&spi6 { >> +    status = "okay"; >> + >> +    can@0 { >> +        compatible = "microchip,mcp2515"; >> +        reg = <0>; >> +        clocks = <&can_osc>; >> +        interrupts-extended = <&tlmm 87 IRQ_TYPE_LEVEL_LOW>; >> +        spi-max-frequency = <10000000>; >> +        vdd-supply = <&vreg_v3p3_can>; >> +        xceiver-supply = <&vreg_v5p0_can>; >> +    }; >> +}; >> + >> +&tlmm { >> +    bt_en_state: bt-en-state { >> +        pins = "gpio85"; >> +        function = "gpio"; >> +        bias-pull-down; >> +    }; >> + >> +    pcie_default_state: pcie-default-state { >> +        clkreq-pins { >> +            pins = "gpio90"; >> +            function = "pcie_clk_req"; >> +            drive-strength = <2>; >> +            bias-pull-up; >> +        }; >> + >> +        perst-pins { >> +            pins = "gpio89"; >> +            function = "gpio"; >> +            drive-strength = <2>; >> +            bias-pull-down; >> +        }; >> + >> +        wake-pins { >> +            pins = "gpio100"; >> +            function = "gpio"; >> +            drive-strength = <2>; >> +            bias-pull-up; >> +        }; >> +    }; >> + >> +    wifi_reg_en_pins_state: wifi-reg-en-pins-state { >> +        pins = "gpio91"; >> +        function = "gpio"; >> +        drive-strength = <8>; >> +        output-high; >> +        bias-pull-up; >> +    }; >> + >> +    wlan_en_state: wlan-en-state { >> +        pins = "gpio84"; >> +        function = "gpio"; >> +        drive-strength = <16>; >> +        bias-pull-up; >> +    }; >> +}; >> + >> +&uart0 { >> +    status = "okay"; >> +}; >> + >> +&uart7 { >> +    status = "okay"; >> + >> +    bluetooth { >> +        compatible = "qcom,wcn6855-bt"; >> +        firmware-name = "QCA6698/hpnv21", "QCA6698/hpbtfw21.tlv"; >> + >> +        vddrfacmn-supply = <&vreg_pmu_rfa_cmn>; >> +        vddaon-supply = <&vreg_pmu_aon_0p59>; >> +        vddwlcx-supply = <&vreg_pmu_wlcx_0p8>; >> +        vddwlmx-supply = <&vreg_pmu_wlmx_0p85>; >> +        vddbtcmx-supply = <&vreg_pmu_btcmx_0p85>; >> +        vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>; >> +        vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>; >> +        vddrfa1p8-supply = <&vreg_pmu_rfa_1p7>; >> +    }; >> +}; >> + >> +/* >> + * USB0 routing and EDL mode: >> + * >> + * The USB0 controller’s HS differential pair is switched (manually) >> + * between the Micro-USB port for EDL/ADB and the on-board USB 3.0 hub. >> + * >> + * During EDL (Emergency Download) mode, the HS lines are explicitly >> + * routed to the Micro-USB port to allow the SoC to enter device mode >> + * for flashing. >> + * >> + * After EDL the switch is normally toggled so the HS lines stay >> + * connected to the hub’s Type-A downstream ports, leaving no electrical >> + * path to the Micro-USB connector — therefore USB0 runs host-only in >> + * normal runtime and device mode must not be advertised. >> + * >> + * USB0 is configured host-only in the base device tree; a separate >> + * device-tree overlay enables the Micro-USB peripheral configuration for >> + * ADB. For ADB to work during normal runtime the DIP switch SW1 must be >> + * manually toggled to the off position (reconnecting the HS pair to the >> + * Micro-USB port). >> + */ >> + >> +&usb_1 { >> +    status = "okay"; >> +}; >> + >> +&usb_1_dwc3 { >> +    dr_mode = "host"; >> +}; >> + >> +&usb_1_hsphy { >> +    vdd-supply = <&vreg_l5a>; >> +    vdda-pll-supply = <&vreg_l12a>; >> +    vdda-phy-dpdm-supply = <&vreg_l13a>; >> + >> +    status = "okay"; >> +}; >> + >> +&usb_2 { >> +    status = "okay"; >> +}; >> + >> +&usb_2_dwc3 { >> +    dr_mode = "host"; >> +}; >> + >> +&usb_2_hsphy { >> +    vdd-supply = <&vreg_l5a>; >> +    vdda-pll-supply = <&vreg_l12a>; >> +    vdda-phy-dpdm-supply = <&vreg_l13a>; >> + >> +    status = "okay"; >> +}; >> + >> +&usb_qmpphy { >> +    vdda-phy-supply = <&vreg_l5a>; >> +    vdda-pll-supply = <&vreg_l12a>; >> + >> +    status = "okay"; >> +}; >> + >> +&usb_qmpphy_2 { >> +    vdda-phy-supply = <&vreg_l11a>; >> +    vdda-pll-supply = <&vreg_l5a>; >> + >> +    status = "okay"; >> +}; >> + >> +&ufs_mem_hc { >> +    reset-gpios = <&tlmm 123 GPIO_ACTIVE_LOW>; >> +    vcc-supply = <&vreg_l17a>; >> +    vcc-max-microamp = <600000>; >> +    vccq2-supply = <&vreg_s4a>; >> +    vccq2-max-microamp = <600000>; >> + >> +    status = "okay"; >> +}; >> + >> +&ufs_mem_phy { >> +    vdda-phy-supply = <&vreg_l5a>; >> +    vdda-pll-supply = <&vreg_l12a>; >> + >> +    status = "okay"; >> +}; >> + >> +&venus { >> +    status = "okay"; >> +}; >> diff --git a/arch/arm64/boot/dts/qcom/talos-evk-usb1-peripheral.dtso b/arch/arm64/boot/dts/qcom/talos-evk-usb1-peripheral.dtso >> new file mode 100644 >> index 000000000000..2f4630a6ba66 >> --- /dev/null >> +++ b/arch/arm64/boot/dts/qcom/talos-evk-usb1-peripheral.dtso >> @@ -0,0 +1,10 @@ >> +// SPDX-License-Identifier: BSD-3-Clause >> +/* >> + * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries. >> + */ >> +/dts-v1/; >> +/plugin/; >> + >> +&usb_1_dwc3 { >> +        dr_mode = "peripheral"; >> +}; >> diff --git a/arch/arm64/boot/dts/qcom/talos-evk.dts b/arch/arm64/boot/dts/qcom/talos-evk.dts >> new file mode 100644 >> index 000000000000..af100e22beee >> --- /dev/null >> +++ b/arch/arm64/boot/dts/qcom/talos-evk.dts >> @@ -0,0 +1,139 @@ >> +// SPDX-License-Identifier: BSD-3-Clause >> +/* >> + * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries. >> + */ >> +/dts-v1/; >> + >> +#include "talos-evk-som.dtsi" >> + >> +/ { >> +    model = "Qualcomm QCS615 IQ 615 EVK"; >> +    compatible = "qcom,talos-evk", "qcom,qcs615", "qcom,sm6150"; >> +    chassis-type = "embedded"; >> + >> +    aliases { >> +        mmc1 = &sdhc_2; >> +    }; >> + >> +    dp0-connector { >> +        compatible = "dp-connector"; >> +        label = "DP0"; >> +        type = "full-size"; >> + >> +        hpd-gpios = <&tlmm 104 GPIO_ACTIVE_HIGH>; >> + >> +        port { >> +            dp0_connector_in: endpoint { >> +                remote-endpoint = <&mdss_dp0_out>; >> +            }; >> +        }; >> +    }; >> + >> +    hdmi_connector: hdmi-out { >> +        compatible = "hdmi-connector"; >> +        type = "d"; >> + >> +        port { >> +            hdmi_con_out: endpoint { >> +            remote-endpoint = <&adv7535_out>; >> +            }; >> +        }; >> +    }; >> + >> +    vreg_v1p8_out: regulator-v1p8-out { >> +        compatible = "regulator-fixed"; >> +        regulator-name = "vreg-v1p8-out"; >> +        regulator-min-microvolt = <1800000>; >> +        regulator-max-microvolt = <1800000>; >> +        vin-supply = <&vreg_v5p0_out>; >> +        regulator-boot-on; >> +        regulator-always-on; >> +    }; >> + >> +    vreg_v3p3_out: regulator-v3p3-out { >> +        compatible = "regulator-fixed"; >> +        regulator-name = "vreg-v3p3-out"; >> +        regulator-min-microvolt = <3300000>; >> +        regulator-max-microvolt = <3300000>; >> +        vin-supply = <&vreg_v5p0_out>; >> +        regulator-boot-on; >> +        regulator-always-on; >> +    }; >> + >> +    vreg_v5p0_out: regulator-v5p0-out { >> +        compatible = "regulator-fixed"; >> +        regulator-name = "vreg-v5p0-out"; >> +        regulator-min-microvolt = <5000000>; >> +        regulator-max-microvolt = <5000000>; >> +        regulator-boot-on; >> +        regulator-always-on; >> +        /* Powered by system 20V rail (USBC_VBUS_IN) */ >> +    }; >> +}; >> + >> +&i2c1 { >> +    clock-frequency = <400000>; >> +    status = "okay"; >> + >> +    hdmi_bridge: bridge@3d { >> +        compatible = "adi,adv7535"; >> +        reg = <0x3d>; >> +        avdd-supply = <&vreg_v1p8_out>; >> +        dvdd-supply = <&vreg_v1p8_out>; >> +        pvdd-supply = <&vreg_v1p8_out>; >> +        a2vdd-supply = <&vreg_v1p8_out>; >> +        v3p3-supply = <&vreg_v3p3_out>; >> +        interrupts-extended = <&tlmm 26 IRQ_TYPE_LEVEL_LOW>; >> +        adi,dsi-lanes = <4>; >> + >> +        ports { >> +            #address-cells = <1>; >> +            #size-cells = <0>; >> + >> +            port@0 { >> +                reg = <0>; >> + >> +                adv7535_in: endpoint { >> +                    remote-endpoint = <&mdss_dsi0_out>; >> +                }; >> +            }; >> + >> +            port@1 { >> +                reg = <1>; >> + >> +                adv7535_out: endpoint { >> +                    remote-endpoint = <&hdmi_con_out>; >> +                }; >> +            }; >> +        }; >> +    }; >> +}; >> + >> +&mdss_dsi0_out { >> +    remote-endpoint = <&adv7535_in>; >> +    data-lanes = <0 1 2 3>; >> +}; >> + >> +&pon_pwrkey { >> +    status = "okay"; >> +}; >> + >> +&pon_resin { >> +    linux,code = ; >> + >> +    status = "okay"; >> +}; >> + >> +&sdhc_2 { >> +    pinctrl-0 = <&sdc2_state_on>; >> +    pinctrl-1 = <&sdc2_state_off>; >> +    pinctrl-names = "default", "sleep"; >> + >> +    bus-width = <4>; >> +    cd-gpios = <&tlmm 99 GPIO_ACTIVE_LOW>; >> + >> +    vmmc-supply = <&vreg_l10a>; >> +    vqmmc-supply = <&vreg_s4a>; >> + >> +    status = "okay"; >> +}; >