From mboxrd@z Thu Jan 1 00:00:00 1970 Received: from mail-pl1-f182.google.com (mail-pl1-f182.google.com [209.85.214.182]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id E4DD22FBDFF for ; Wed, 14 Jan 2026 09:02:20 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=209.85.214.182 ARC-Seal:i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1768381346; cv=none; b=EAdMLA5AO39Pbc3AJDJ4M+DvMOoYptnwbfZK5HTg65yyOYANmOui6AOkYGM+z8/U0LzpueGF/H1Ertg3LR/Dx2F3cAvEFxJttN83aG6hqDZhX1EtYDNARVEtZKcy3SJC4r3JBJITIIFPuFvFwi5TOkYWL2V0r4+aihiIjtAlyds= ARC-Message-Signature:i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1768381346; c=relaxed/simple; bh=csvrwP9v5Yoaeem2AeHn8iuAs0t7xX4JFllNmN8UJe0=; h=Message-ID:Date:MIME-Version:Subject:To:Cc:References:From: In-Reply-To:Content-Type; b=ITXTJJ+nhiqPZ5KvktiY6uVO19v1eCNK3vJkkGUBuIz1gy3mtWzPKjjnWODD0M9nzPHcUptu2APOkltBNJMu7UQsbLsTmuTYox06gfxgagxJXVRiZaI7wZCofLBJk3jJcvJd71HKBieMGRO04D0B6v4ED2Undv/eG/a8lGST4cg= ARC-Authentication-Results:i=1; smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=gmail.com; spf=pass smtp.mailfrom=gmail.com; dkim=pass (2048-bit key) header.d=gmail.com header.i=@gmail.com header.b=Wxmh855U; arc=none smtp.client-ip=209.85.214.182 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=gmail.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=gmail.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=gmail.com header.i=@gmail.com header.b="Wxmh855U" Received: by mail-pl1-f182.google.com with SMTP id d9443c01a7336-2a0c20ee83dso75565315ad.2 for ; Wed, 14 Jan 2026 01:02:20 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20230601; t=1768381339; x=1768986139; darn=vger.kernel.org; h=content-transfer-encoding:in-reply-to:from:content-language :references:cc:to:subject:user-agent:mime-version:date:message-id :from:to:cc:subject:date:message-id:reply-to; bh=JdsW/uV75btme1QDXSALA6WJlOkqMVFAzSAmvJ9r0+w=; b=Wxmh855U7zKb6DTbq+1nFf1FAIQBSnSdVrUocxRRsNUuOoJj11DLW6+CeZ882MiMHe z0oi4fBA8yuhyzdwPJiWrDabxIWahq4tuh7IQmwjjEwcJyFpyvBKa1u2nc8onCWo+Jbv qDTLdpuBsKVrxdTQTQJm3YT7c7t4Jz6ogsw9srmEzM/qeE3/Fkfp+UyX1mJNNFUpb9X3 6s7/gI9Rp2Eov08jemNozqdjPg3cEOESm1iq8MkGcprJDSYjhMQN7VuLVs8YiKuX1bvH rmKiv9SPZuOGWzyZMZ+OogHnvP6kAEVYKcuoTZQwdxduEwQQ5YPfNRe8NdV+SkHN9OeD uJRw== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20230601; t=1768381339; x=1768986139; h=content-transfer-encoding:in-reply-to:from:content-language :references:cc:to:subject:user-agent:mime-version:date:message-id :x-gm-gg:x-gm-message-state:from:to:cc:subject:date:message-id :reply-to; bh=JdsW/uV75btme1QDXSALA6WJlOkqMVFAzSAmvJ9r0+w=; b=csqoIDY8ubJYXTtES6UvALTctRNRTP3ZUeHlUuoJnfXT6+2YvEoOwwTZ1VtwgE4rIH 29Q5ym02CTvF6iPkEPB8HXyFOgRlObSS7UaIFFErdINNjdPWlEi1/5TtxFgdRPaOxOwa ZozfX9QFL10k4PJ+7JOkdpKP58orVImbVQkl5rz9PfRrHrLsgurhuQjtC3eLiDYuqN/L aAJGN/SzjCK+VFfEDHsdB4nUNWPRKl0s0OVAhpMW2z+LPRK/vtNepd2aKtH/k85f0nwU D/7tnXgAReSd0KgWzqI79/8/hqU8sfoLKC6wKZ21Hi6jf3Jr5leKs7CDAVKPmNXq1bLQ oCNA== X-Forwarded-Encrypted: i=1; AJvYcCU4K6PWwt8lJ1gFXydhfQ4UWe2ElUG5S5cQfdHqHL8tfsaJ+QJJtdjp6viHlxCOroXWFYTLXVjzzyaGQQyR@vger.kernel.org X-Gm-Message-State: AOJu0YywfZ0VyVtweOWSOPZDWVhUiM30GKkzKc1Q39eiSJeWmVuzPb04 nM80w4DvV0jXqsW+wQbCTdpVw5/bZMWBQccwdxMXqQqXhYbSURWFQgpe X-Gm-Gg: AY/fxX7zx6m5OqvFN2AityB3jFP8310CE9gl4ChTS+Dp/2cal0hRCQoRv/ZJWXXBwgw vgJlSdND6uymkcjOuMlAvJyGhLnH3smlIvHZDrCwACW4JACbeYT6CavqiUM6z6WlAcAOakmf4kF k+XrKLv6PLylxUpbiUB+J8fe9d7mI8wKpwjaBMnUsJmG7m5ChGPlNKv4MQujgE/E0TofyF1lKEb lb9Jhpcbo6GefXPmfR51DrENddSBxh4nFzDge4ENf9UhvfjIj85Eys4WZMYo6zW9WqiVu+CB3SM rLnb94nN5JDnJDnFnUhltGeeAU+GbE2zhhM4phsCzj93t6NZEVxP89xTXINZDWvYQExJFv/jhTE rrAdd02BrHDVFEyLUD7z5gjZK+Ulp3i3jpCjL9QGyURJqeoNMHdYuv7cAREjiq8qSaetSComx4n o2CqtG1VGvhbVK11mCGaFg1sE76PjWo/4zvg== X-Received: by 2002:a17:902:e551:b0:29f:29ae:8733 with SMTP id d9443c01a7336-2a59bc6819fmr13785435ad.53.1768381338959; Wed, 14 Jan 2026 01:02:18 -0800 (PST) Received: from [172.16.20.12] ([136.226.253.21]) by smtp.gmail.com with ESMTPSA id d9443c01a7336-2a3e3c3a4f1sm216766185ad.8.2026.01.14.01.02.14 (version=TLS1_3 cipher=TLS_AES_128_GCM_SHA256 bits=128/128); Wed, 14 Jan 2026 01:02:18 -0800 (PST) Message-ID: <43aa0a1a-a645-44a2-a13f-186fe59a16c1@gmail.com> Date: Wed, 14 Jan 2026 14:32:42 +0530 Precedence: bulk X-Mailing-List: linux-arm-msm@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 User-Agent: Mozilla Thunderbird Subject: Re: [PATCH v11 4/4] arm64: dts: qcom: talos-evk: Add support for QCS615 talos evk board To: yuanjiey Cc: andersson@kernel.org, konradybcio@kernel.org, robh@kernel.org, krzk+dt@kernel.org, conor+dt@kernel.org, linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org References: <20260109095221.2847067-5-tessolveupstream@gmail.com> Content-Language: en-US From: tessolveupstream@gmail.com In-Reply-To: Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 7bit On 12-01-2026 08:48, yuanjiey wrote: > On Fri, Jan 09, 2026 at 03:22:20PM +0530, Sudarshan Shetty wrote: >> Add the device tree for the QCS615-based Talos EVK platform. The >> platform is composed of a System-on-Module following the SMARC >> standard, and a Carrier Board. >> >> The Carrier Board supports several display configurations, HDMI and >> LVDS. Both configurations use the same base hardware, with the display >> selection controlled by a DIP switch. >> >> Use a DTBO file, talos-evk-lvds-auo,g133han01.dtso, which defines an >> overlay that disables HDMI and adds LVDS. The DTs file talos-evk >> can describe the HDMI display configurations. >> >> The initial device tree includes support for: >> - CPU and memory >> - UART >> - GPIOs >> - Regulators >> - PMIC >> - Early console >> - AT24MAC602 EEPROM >> - MCP2515 SPI to CAN >> - ADV7535 DSI-to-HDMI bridge >> - DisplayPort interface >> - SN65DSI84ZXHR DSI-to-LVDS bridge >> - Wi-Fi/BT >> >> Reviewed-by: Dmitry Baryshkov >> Signed-off-by: Sudarshan Shetty >> --- >> arch/arm64/boot/dts/qcom/Makefile | 4 + >> .../qcom/talos-evk-lvds-auo,g133han01.dtso | 126 ++++ >> arch/arm64/boot/dts/qcom/talos-evk-som.dtsi | 616 ++++++++++++++++++ >> arch/arm64/boot/dts/qcom/talos-evk.dts | 139 ++++ >> 4 files changed, 885 insertions(+) >> create mode 100644 arch/arm64/boot/dts/qcom/talos-evk-lvds-auo,g133han01.dtso >> create mode 100644 arch/arm64/boot/dts/qcom/talos-evk-som.dtsi >> create mode 100644 arch/arm64/boot/dts/qcom/talos-evk.dts >> >> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile >> index 76cf0115a00a..289b651ef0c5 100644 >> --- a/arch/arm64/boot/dts/qcom/Makefile >> +++ b/arch/arm64/boot/dts/qcom/Makefile >> @@ -324,6 +324,10 @@ dtb-$(CONFIG_ARCH_QCOM) += sm8650-mtp.dtb >> dtb-$(CONFIG_ARCH_QCOM) += sm8650-qrd.dtb >> dtb-$(CONFIG_ARCH_QCOM) += sm8750-mtp.dtb >> dtb-$(CONFIG_ARCH_QCOM) += sm8750-qrd.dtb >> +dtb-$(CONFIG_ARCH_QCOM) += talos-evk.dtb >> +talos-evk-lvds-auo,g133han01-dtbs := \ >> + talos-evk.dtb talos-evk-lvds-auo,g133han01.dtbo >> +dtb-$(CONFIG_ARCH_QCOM) += talos-evk-lvds-auo,g133han01.dtb >> x1e001de-devkit-el2-dtbs := x1e001de-devkit.dtb x1-el2.dtbo >> dtb-$(CONFIG_ARCH_QCOM) += x1e001de-devkit.dtb x1e001de-devkit-el2.dtb >> x1e78100-lenovo-thinkpad-t14s-el2-dtbs := x1e78100-lenovo-thinkpad-t14s.dtb x1-el2.dtbo >> diff --git a/arch/arm64/boot/dts/qcom/talos-evk-lvds-auo,g133han01.dtso b/arch/arm64/boot/dts/qcom/talos-evk-lvds-auo,g133han01.dtso >> new file mode 100644 >> index 000000000000..ad058cf4cd93 >> --- /dev/null >> +++ b/arch/arm64/boot/dts/qcom/talos-evk-lvds-auo,g133han01.dtso >> @@ -0,0 +1,126 @@ >> +// SPDX-License-Identifier: BSD-3-Clause >> +/* >> + * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries. >> + */ >> +/dts-v1/; >> +/plugin/; >> + >> +#include >> + >> +&{/} { >> + backlight: backlight { >> + compatible = "gpio-backlight"; >> + gpios = <&tlmm 59 GPIO_ACTIVE_HIGH>, >> + <&tlmm 115 GPIO_ACTIVE_HIGH>; >> + default-on; >> + }; >> + >> + panel-lvds { >> + compatible = "auo,g133han01"; >> + >> + ports { >> + #address-cells = <1>; >> + #size-cells = <0>; >> + >> + /* LVDS A (Odd pixels) */ >> + port@0 { >> + reg = <0>; >> + dual-lvds-odd-pixels; >> + >> + lvds_panel_out_a: endpoint { >> + remote-endpoint = <&sn65dsi84_out_a>; >> + }; >> + }; >> + >> + /* LVDS B (Even pixels) */ >> + port@1 { >> + reg = <1>; >> + dual-lvds-even-pixels; >> + >> + lvds_panel_out_b: endpoint { >> + remote-endpoint = <&sn65dsi84_out_b>; >> + }; >> + }; >> + }; >> + }; >> +}; >> + >> +&hdmi_connector { >> + status = "disabled"; >> +}; >> + >> +&i2c1 { >> + clock-frequency = <400000>; >> + >> + status = "okay"; >> + >> + hdmi_bridge: bridge@3d { >> + status = "disabled"; >> + }; >> + >> + lvds_bridge: bridge@2c { > power-supply, if be optional, need to modify dt-binding file. > otherwise we will meet binding check error. Okay, got it. I will make necessary changes in the next patchset so that the binding check passes. > >> + compatible = "ti,sn65dsi84"; >> + reg = <0x2c>; >> + enable-gpios = <&tlmm 42 GPIO_ACTIVE_HIGH>; >> + ti,dsi-lanes = <4>; >> + ti,lvds-format = "jeida-24"; >> + ti,lvds-bpp = <24>; > > ti,dsi-lanes, ti,lvds-format, ti,lvds-bpp, do we need these property? > I don't see these property be used from kernel 6.6 to kernel 6.19. > Will drop these ti,dsi-lanes, ti,lvds-format, and ti,lvds-bpp properties in the next patchset. > > Thanks, > Yuanjie > > >> + ports { >> + #address-cells = <1>; >> + #size-cells = <0>; >> + >> + port@0 { >> + reg = <0>; >> + >> + sn65dsi84_in: endpoint { >> + data-lanes = <1 2 3 4>; >> + remote-endpoint = <&mdss_dsi0_out>; >> + }; >> + }; >> + >> + port@2 { >> + reg = <2>; >> + >> + sn65dsi84_out_a: endpoint { >> + data-lanes = <1 2 3 4>; >> + remote-endpoint = <&lvds_panel_out_a>; >> + }; >> + }; >> + >> + port@3 { >> + reg = <3>; >> + >> + sn65dsi84_out_b: endpoint { >> + data-lanes = <1 2 3 4>; >> + remote-endpoint = <&lvds_panel_out_b>; >> + }; >> + }; >> + }; >> + }; >> +}; >> + >> +&mdss_dsi0 { >> + vdda-supply = <&vreg_l11a>; >> + >> + status = "okay"; >> +}; >> + >> +&mdss_dsi0_out { >> + remote-endpoint = <&sn65dsi84_in>; >> + data-lanes = <0 1 2 3>; >> +}; >> + >> +&tlmm { >> + lcd_bklt_en: lcd-bklt-en-state { >> + pins = "gpio115"; >> + function = "gpio"; >> + bias-disable; >> + }; >> + >> + lcd_bklt_pwm: lcd-bklt-pwm-state { >> + pins = "gpio59"; >> + function = "gpio"; >> + bias-disable; >> + }; >> +}; >> diff --git a/arch/arm64/boot/dts/qcom/talos-evk-som.dtsi b/arch/arm64/boot/dts/qcom/talos-evk-som.dtsi >> new file mode 100644 >> index 000000000000..95ed335bcb08 >> --- /dev/null >> +++ b/arch/arm64/boot/dts/qcom/talos-evk-som.dtsi >> @@ -0,0 +1,616 @@ >> +// SPDX-License-Identifier: BSD-3-Clause >> +/* >> + * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries. >> + */ >> +/dts-v1/; >> + >> +#include >> +#include >> +#include "talos.dtsi" >> +#include "pm8150.dtsi" >> +/ { >> + aliases { >> + mmc0 = &sdhc_1; >> + serial0 = &uart0; >> + serial1 = &uart7; >> + }; >> + >> + chosen { >> + stdout-path = "serial0:115200n8"; >> + }; >> + >> + clocks { >> + can_osc: can-oscillator { >> + compatible = "fixed-clock"; >> + clock-frequency = <20000000>; >> + #clock-cells = <0>; >> + }; >> + >> + sleep_clk: sleep-clk { >> + compatible = "fixed-clock"; >> + clock-frequency = <32764>; >> + #clock-cells = <0>; >> + }; >> + >> + xo_board_clk: xo-board-clk { >> + compatible = "fixed-clock"; >> + clock-frequency = <38400000>; >> + #clock-cells = <0>; >> + }; >> + }; >> + >> + regulator-usb2-vbus { >> + compatible = "regulator-fixed"; >> + regulator-name = "USB2_VBUS"; >> + gpio = <&pm8150_gpios 10 GPIO_ACTIVE_HIGH>; >> + pinctrl-0 = <&usb2_en>; >> + pinctrl-names = "default"; >> + enable-active-high; >> + regulator-always-on; >> + }; >> + >> + vreg_conn_1p8: regulator-conn-1p8 { >> + compatible = "regulator-fixed"; >> + regulator-name = "vreg_conn_1p8"; >> + startup-delay-us = <4000>; >> + enable-active-high; >> + gpio = <&pm8150_gpios 1 GPIO_ACTIVE_HIGH>; >> + }; >> + >> + vreg_conn_pa: regulator-conn-pa { >> + compatible = "regulator-fixed"; >> + regulator-name = "vreg_conn_pa"; >> + startup-delay-us = <4000>; >> + enable-active-high; >> + gpio = <&pm8150_gpios 6 GPIO_ACTIVE_HIGH>; >> + }; >> + >> + vreg_v3p3_can: regulator-v3p3-can { >> + compatible = "regulator-fixed"; >> + regulator-name = "vreg-v3p3-can"; >> + regulator-min-microvolt = <3300000>; >> + regulator-max-microvolt = <3300000>; >> + regulator-boot-on; >> + regulator-always-on; >> + }; >> + >> + vreg_v5p0_can: regulator-v5p0-can { >> + compatible = "regulator-fixed"; >> + regulator-name = "vreg-v5p0-can"; >> + regulator-min-microvolt = <5000000>; >> + regulator-max-microvolt = <5000000>; >> + regulator-boot-on; >> + regulator-always-on; >> + }; >> + >> + wcn6855-pmu { >> + compatible = "qcom,wcn6855-pmu"; >> + >> + pinctrl-0 = <&bt_en_state>, <&wlan_en_state>; >> + pinctrl-names = "default"; >> + >> + bt-enable-gpios = <&tlmm 85 GPIO_ACTIVE_HIGH>; >> + wlan-enable-gpios = <&tlmm 84 GPIO_ACTIVE_HIGH>; >> + >> + vddio-supply = <&vreg_conn_pa>; >> + vddaon-supply = <&vreg_s5a>; >> + vddpmu-supply = <&vreg_conn_1p8>; >> + vddpmumx-supply = <&vreg_conn_1p8>; >> + vddpmucx-supply = <&vreg_conn_pa>; >> + vddrfa0p95-supply = <&vreg_s5a>; >> + vddrfa1p3-supply = <&vreg_s6a>; >> + vddrfa1p9-supply = <&vreg_l15a>; >> + vddpcie1p3-supply = <&vreg_s6a>; >> + vddpcie1p9-supply = <&vreg_l15a>; >> + >> + regulators { >> + vreg_pmu_rfa_cmn: ldo0 { >> + regulator-name = "vreg_pmu_rfa_cmn"; >> + }; >> + >> + vreg_pmu_aon_0p59: ldo1 { >> + regulator-name = "vreg_pmu_aon_0p59"; >> + }; >> + >> + vreg_pmu_wlcx_0p8: ldo2 { >> + regulator-name = "vreg_pmu_wlcx_0p8"; >> + }; >> + >> + vreg_pmu_wlmx_0p85: ldo3 { >> + regulator-name = "vreg_pmu_wlmx_0p85"; >> + }; >> + >> + vreg_pmu_btcmx_0p85: ldo4 { >> + regulator-name = "vreg_pmu_btcmx_0p85"; >> + }; >> + >> + vreg_pmu_rfa_0p8: ldo5 { >> + regulator-name = "vreg_pmu_rfa_0p8"; >> + }; >> + >> + vreg_pmu_rfa_1p2: ldo6 { >> + regulator-name = "vreg_pmu_rfa_1p2"; >> + }; >> + >> + vreg_pmu_rfa_1p7: ldo7 { >> + regulator-name = "vreg_pmu_rfa_1p7"; >> + }; >> + >> + vreg_pmu_pcie_0p9: ldo8 { >> + regulator-name = "vreg_pmu_pcie_0p9"; >> + }; >> + >> + vreg_pmu_pcie_1p8: ldo9 { >> + regulator-name = "vreg_pmu_pcie_1p8"; >> + }; >> + }; >> + }; >> + >> + wifi_1p8v: regulator-wifi-1p8v { >> + compatible = "regulator-fixed"; >> + regulator-name = "wifi_1p8v"; >> + regulator-min-microvolt = <1800000>; >> + regulator-max-microvolt = <1800000>; >> + gpio = <&tlmm 91 GPIO_ACTIVE_HIGH>; >> + enable-active-high; >> + pinctrl-0 = <&wifi_reg_en_pins_state>; >> + pinctrl-names = "default"; >> + regulator-boot-on; >> + regulator-always-on; >> + }; >> + >> + wifi_3p85v: regulator-wifi-3p85v { >> + compatible = "regulator-fixed"; >> + regulator-name = "wifi_3p85v"; >> + regulator-min-microvolt = <3850000>; >> + regulator-max-microvolt = <3850000>; >> + gpio = <&tlmm 91 GPIO_ACTIVE_HIGH>; >> + enable-active-high; >> + pinctrl-0 = <&wifi_reg_en_pins_state>; >> + pinctrl-names = "default"; >> + regulator-boot-on; >> + regulator-always-on; >> + }; >> +}; >> + >> +&apps_rsc { >> + regulators-0 { >> + compatible = "qcom,pm8150-rpmh-regulators"; >> + qcom,pmic-id = "a"; >> + >> + vreg_s3a: smps3 { >> + regulator-name = "vreg_s3a"; >> + regulator-min-microvolt = <600000>; >> + regulator-max-microvolt = <650000>; >> + regulator-initial-mode = ; >> + }; >> + >> + vreg_s4a: smps4 { >> + regulator-name = "vreg_s4a"; >> + regulator-min-microvolt = <1800000>; >> + regulator-max-microvolt = <1829000>; >> + regulator-initial-mode = ; >> + }; >> + >> + vreg_s5a: smps5 { >> + regulator-name = "vreg_s5a"; >> + regulator-min-microvolt = <1896000>; >> + regulator-max-microvolt = <2040000>; >> + regulator-initial-mode = ; >> + }; >> + >> + vreg_s6a: smps6 { >> + regulator-name = "vreg_s6a"; >> + regulator-min-microvolt = <1304000>; >> + regulator-max-microvolt = <1404000>; >> + regulator-initial-mode = ; >> + }; >> + >> + vreg_l1a: ldo1 { >> + regulator-name = "vreg_l1a"; >> + regulator-min-microvolt = <488000>; >> + regulator-max-microvolt = <852000>; >> + regulator-initial-mode = ; >> + regulator-allow-set-load; >> + regulator-allowed-modes = > + RPMH_REGULATOR_MODE_HPM>; >> + }; >> + >> + vreg_l2a: ldo2 { >> + regulator-name = "vreg_l2a"; >> + regulator-min-microvolt = <1650000>; >> + regulator-max-microvolt = <3100000>; >> + regulator-initial-mode = ; >> + regulator-allow-set-load; >> + regulator-allowed-modes = > + RPMH_REGULATOR_MODE_HPM>; >> + }; >> + >> + vreg_l3a: ldo3 { >> + regulator-name = "vreg_l3a"; >> + regulator-min-microvolt = <1000000>; >> + regulator-max-microvolt = <1248000>; >> + regulator-initial-mode = ; >> + regulator-allow-set-load; >> + regulator-allowed-modes = > + RPMH_REGULATOR_MODE_HPM>; >> + }; >> + >> + vreg_l5a: ldo5 { >> + regulator-name = "vreg_l5a"; >> + regulator-min-microvolt = <875000>; >> + regulator-max-microvolt = <975000>; >> + regulator-initial-mode = ; >> + regulator-allow-set-load; >> + regulator-allowed-modes = > + RPMH_REGULATOR_MODE_HPM>; >> + }; >> + >> + vreg_l7a: ldo7 { >> + regulator-name = "vreg_l7a"; >> + regulator-min-microvolt = <1800000>; >> + regulator-max-microvolt = <1900000>; >> + regulator-initial-mode = ; >> + regulator-allow-set-load; >> + regulator-allowed-modes = > + RPMH_REGULATOR_MODE_HPM>; >> + }; >> + >> + vreg_l8a: ldo8 { >> + regulator-name = "vreg_l8a"; >> + regulator-min-microvolt = <1150000>; >> + regulator-max-microvolt = <1350000>; >> + regulator-initial-mode = ; >> + regulator-allow-set-load; >> + regulator-allowed-modes = > + RPMH_REGULATOR_MODE_HPM>; >> + }; >> + >> + vreg_l10a: ldo10 { >> + regulator-name = "vreg_l10a"; >> + regulator-min-microvolt = <2950000>; >> + regulator-max-microvolt = <3312000>; >> + regulator-initial-mode = ; >> + regulator-allow-set-load; >> + regulator-allowed-modes = > + RPMH_REGULATOR_MODE_HPM>; >> + }; >> + >> + vreg_l11a: ldo11 { >> + regulator-name = "vreg_l11a"; >> + regulator-min-microvolt = <1232000>; >> + regulator-max-microvolt = <1260000>; >> + regulator-initial-mode = ; >> + regulator-allow-set-load; >> + regulator-allowed-modes = > + RPMH_REGULATOR_MODE_HPM>; >> + }; >> + >> + vreg_l12a: ldo12 { >> + regulator-name = "vreg_l12a"; >> + regulator-min-microvolt = <1800000>; >> + regulator-max-microvolt = <1890000>; >> + regulator-initial-mode = ; >> + }; >> + >> + vreg_l13a: ldo13 { >> + regulator-name = "vreg_l13a"; >> + regulator-min-microvolt = <3000000>; >> + regulator-max-microvolt = <3230000>; >> + regulator-initial-mode = ; >> + regulator-allow-set-load; >> + regulator-allowed-modes = > + RPMH_REGULATOR_MODE_HPM>; >> + }; >> + >> + vreg_l15a: ldo15 { >> + regulator-name = "vreg_l15a"; >> + regulator-min-microvolt = <1800000>; >> + regulator-max-microvolt = <1904000>; >> + regulator-initial-mode = ; >> + regulator-allow-set-load; >> + regulator-allowed-modes = > + RPMH_REGULATOR_MODE_HPM>; >> + }; >> + >> + vreg_l16a: ldo16 { >> + regulator-name = "vreg_l16a"; >> + regulator-min-microvolt = <3000000>; >> + regulator-max-microvolt = <3312000>; >> + regulator-initial-mode = ; >> + regulator-allow-set-load; >> + regulator-allowed-modes = > + RPMH_REGULATOR_MODE_HPM>; >> + }; >> + >> + vreg_l17a: ldo17 { >> + regulator-name = "vreg_l17a"; >> + regulator-min-microvolt = <2950000>; >> + regulator-max-microvolt = <3312000>; >> + regulator-initial-mode = ; >> + }; >> + }; >> +}; >> + >> +&gpi_dma0 { >> + status = "okay"; >> +}; >> + >> +&gpi_dma1 { >> + status = "okay"; >> +}; >> + >> +&i2c5 { >> + clock-frequency = <400000>; >> + status = "okay"; >> + >> + eeprom@57 { >> + compatible = "atmel,24c02"; >> + reg = <0x57>; >> + pagesize = <16>; >> + }; >> + >> + eeprom@5f { >> + compatible = "atmel,24mac602"; >> + reg = <0x5f>; >> + pagesize = <16>; >> + }; >> +}; >> + >> +&mdss { >> + status = "okay"; >> +}; >> + >> +&mdss_dp0 { >> + status = "okay"; >> +}; >> + >> +&mdss_dp0_out { >> + link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000>; >> + remote-endpoint = <&dp0_connector_in>; >> +}; >> + >> +&mdss_dsi0 { >> + vdda-supply = <&vreg_l11a>; >> + status = "okay"; >> +}; >> + >> +&mdss_dsi0_phy { >> + vcca-supply = <&vreg_l5a>; >> + status = "okay"; >> +}; >> + >> +&pcie { >> + perst-gpios = <&tlmm 89 GPIO_ACTIVE_LOW>; >> + wake-gpios = <&tlmm 100 GPIO_ACTIVE_HIGH>; >> + >> + pinctrl-0 = <&pcie_default_state>; >> + pinctrl-names = "default"; >> + >> + status = "okay"; >> +}; >> + >> +&pcie_phy { >> + vdda-phy-supply = <&vreg_l5a>; >> + vdda-pll-supply = <&vreg_l12a>; >> + >> + status = "okay"; >> +}; >> + >> +&pcie_port0 { >> + wifi@0 { >> + compatible = "pci17cb,1103"; >> + reg = <0x10000 0x0 0x0 0x0 0x0>; >> + >> + qcom,calibration-variant = "QC_QCS615_Ride"; >> + >> + vddrfacmn-supply = <&vreg_pmu_rfa_cmn>; >> + vddaon-supply = <&vreg_pmu_aon_0p59>; >> + vddwlcx-supply = <&vreg_pmu_wlcx_0p8>; >> + vddwlmx-supply = <&vreg_pmu_wlmx_0p85>; >> + vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>; >> + vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>; >> + vddrfa1p8-supply = <&vreg_pmu_rfa_1p7>; >> + vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>; >> + vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>; >> + }; >> +}; >> + >> +&pm8150_gpios { >> + usb2_en: usb2-en-state { >> + pins = "gpio10"; >> + function = "normal"; >> + output-enable; >> + power-source = <0>; >> + }; >> +}; >> + >> +&qupv3_id_0 { >> + status = "okay"; >> +}; >> + >> +&qupv3_id_1 { >> + status = "okay"; >> +}; >> + >> +&remoteproc_adsp { >> + firmware-name = "qcom/qcs615/adsp.mbn"; >> + >> + status = "okay"; >> +}; >> + >> +&remoteproc_cdsp { >> + firmware-name = "qcom/qcs615/cdsp.mbn"; >> + >> + status = "okay"; >> +}; >> + >> +&sdhc_1 { >> + pinctrl-0 = <&sdc1_state_on>; >> + pinctrl-1 = <&sdc1_state_off>; >> + pinctrl-names = "default", "sleep"; >> + >> + bus-width = <8>; >> + mmc-ddr-1_8v; >> + mmc-hs200-1_8v; >> + mmc-hs400-1_8v; >> + mmc-hs400-enhanced-strobe; >> + vmmc-supply = <&vreg_l17a>; >> + vqmmc-supply = <&vreg_s4a>; >> + >> + non-removable; >> + no-sd; >> + no-sdio; >> + >> + status = "okay"; >> +}; >> + >> +&spi6 { >> + status = "okay"; >> + >> + can@0 { >> + compatible = "microchip,mcp2515"; >> + reg = <0>; >> + clocks = <&can_osc>; >> + interrupts-extended = <&tlmm 87 IRQ_TYPE_LEVEL_LOW>; >> + spi-max-frequency = <10000000>; >> + vdd-supply = <&vreg_v3p3_can>; >> + xceiver-supply = <&vreg_v5p0_can>; >> + }; >> +}; >> + >> +&tlmm { >> + bt_en_state: bt-en-state { >> + pins = "gpio85"; >> + function = "gpio"; >> + bias-pull-down; >> + }; >> + >> + pcie_default_state: pcie-default-state { >> + clkreq-pins { >> + pins = "gpio90"; >> + function = "pcie_clk_req"; >> + drive-strength = <2>; >> + bias-pull-up; >> + }; >> + >> + perst-pins { >> + pins = "gpio89"; >> + function = "gpio"; >> + drive-strength = <2>; >> + bias-disable; >> + }; >> + >> + wake-pins { >> + pins = "gpio100"; >> + function = "gpio"; >> + drive-strength = <2>; >> + bias-pull-up; >> + }; >> + }; >> + >> + wifi_reg_en_pins_state: wifi-reg-en-pins-state { >> + pins = "gpio91"; >> + function = "gpio"; >> + drive-strength = <8>; >> + output-high; >> + bias-pull-up; >> + }; >> + >> + wlan_en_state: wlan-en-state { >> + pins = "gpio84"; >> + function = "gpio"; >> + drive-strength = <16>; >> + bias-pull-down; >> + output-low; >> + }; >> +}; >> + >> +&uart0 { >> + status = "okay"; >> +}; >> + >> +&uart7 { >> + status = "okay"; >> + >> + bluetooth { >> + compatible = "qcom,wcn6855-bt"; >> + firmware-name = "QCA6698/hpnv21", "QCA6698/hpbtfw21.tlv"; >> + >> + vddrfacmn-supply = <&vreg_pmu_rfa_cmn>; >> + vddaon-supply = <&vreg_pmu_aon_0p59>; >> + vddwlcx-supply = <&vreg_pmu_wlcx_0p8>; >> + vddwlmx-supply = <&vreg_pmu_wlmx_0p85>; >> + vddbtcmx-supply = <&vreg_pmu_btcmx_0p85>; >> + vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>; >> + vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>; >> + vddrfa1p8-supply = <&vreg_pmu_rfa_1p7>; >> + }; >> +}; >> + >> +&usb_1 { >> + status = "okay"; >> +}; >> + >> +&usb_1_dwc3 { >> + dr_mode = "host"; >> +}; >> + >> +&usb_hsphy_1 { >> + vdd-supply = <&vreg_l5a>; >> + vdda-pll-supply = <&vreg_l12a>; >> + vdda-phy-dpdm-supply = <&vreg_l13a>; >> + >> + status = "okay"; >> +}; >> + >> +&usb_2 { >> + status = "okay"; >> +}; >> + >> +&usb_2_dwc3 { >> + dr_mode = "host"; >> +}; >> + >> +&usb_hsphy_2 { >> + vdd-supply = <&vreg_l5a>; >> + vdda-pll-supply = <&vreg_l12a>; >> + vdda-phy-dpdm-supply = <&vreg_l13a>; >> + >> + status = "okay"; >> +}; >> + >> +&usb_qmpphy { >> + vdda-phy-supply = <&vreg_l5a>; >> + vdda-pll-supply = <&vreg_l12a>; >> + >> + status = "okay"; >> +}; >> + >> +&usb_qmpphy_2 { >> + vdda-phy-supply = <&vreg_l11a>; >> + vdda-pll-supply = <&vreg_l5a>; >> + >> + status = "okay"; >> +}; >> + >> +&ufs_mem_hc { >> + reset-gpios = <&tlmm 123 GPIO_ACTIVE_LOW>; >> + vcc-supply = <&vreg_l17a>; >> + vcc-max-microamp = <600000>; >> + vccq2-supply = <&vreg_s4a>; >> + vccq2-max-microamp = <600000>; >> + >> + status = "okay"; >> +}; >> + >> +&ufs_mem_phy { >> + vdda-phy-supply = <&vreg_l5a>; >> + vdda-pll-supply = <&vreg_l12a>; >> + >> + status = "okay"; >> +}; >> + >> +&venus { >> + status = "okay"; >> +}; >> diff --git a/arch/arm64/boot/dts/qcom/talos-evk.dts b/arch/arm64/boot/dts/qcom/talos-evk.dts >> new file mode 100644 >> index 000000000000..af100e22beee >> --- /dev/null >> +++ b/arch/arm64/boot/dts/qcom/talos-evk.dts >> @@ -0,0 +1,139 @@ >> +// SPDX-License-Identifier: BSD-3-Clause >> +/* >> + * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries. >> + */ >> +/dts-v1/; >> + >> +#include "talos-evk-som.dtsi" >> + >> +/ { >> + model = "Qualcomm QCS615 IQ 615 EVK"; >> + compatible = "qcom,talos-evk", "qcom,qcs615", "qcom,sm6150"; >> + chassis-type = "embedded"; >> + >> + aliases { >> + mmc1 = &sdhc_2; >> + }; >> + >> + dp0-connector { >> + compatible = "dp-connector"; >> + label = "DP0"; >> + type = "full-size"; >> + >> + hpd-gpios = <&tlmm 104 GPIO_ACTIVE_HIGH>; >> + >> + port { >> + dp0_connector_in: endpoint { >> + remote-endpoint = <&mdss_dp0_out>; >> + }; >> + }; >> + }; >> + >> + hdmi_connector: hdmi-out { >> + compatible = "hdmi-connector"; >> + type = "d"; >> + >> + port { >> + hdmi_con_out: endpoint { >> + remote-endpoint = <&adv7535_out>; >> + }; >> + }; >> + }; >> + >> + vreg_v1p8_out: regulator-v1p8-out { >> + compatible = "regulator-fixed"; >> + regulator-name = "vreg-v1p8-out"; >> + regulator-min-microvolt = <1800000>; >> + regulator-max-microvolt = <1800000>; >> + vin-supply = <&vreg_v5p0_out>; >> + regulator-boot-on; >> + regulator-always-on; >> + }; >> + >> + vreg_v3p3_out: regulator-v3p3-out { >> + compatible = "regulator-fixed"; >> + regulator-name = "vreg-v3p3-out"; >> + regulator-min-microvolt = <3300000>; >> + regulator-max-microvolt = <3300000>; >> + vin-supply = <&vreg_v5p0_out>; >> + regulator-boot-on; >> + regulator-always-on; >> + }; >> + >> + vreg_v5p0_out: regulator-v5p0-out { >> + compatible = "regulator-fixed"; >> + regulator-name = "vreg-v5p0-out"; >> + regulator-min-microvolt = <5000000>; >> + regulator-max-microvolt = <5000000>; >> + regulator-boot-on; >> + regulator-always-on; >> + /* Powered by system 20V rail (USBC_VBUS_IN) */ >> + }; >> +}; >> + >> +&i2c1 { >> + clock-frequency = <400000>; >> + status = "okay"; >> + >> + hdmi_bridge: bridge@3d { >> + compatible = "adi,adv7535"; >> + reg = <0x3d>; >> + avdd-supply = <&vreg_v1p8_out>; >> + dvdd-supply = <&vreg_v1p8_out>; >> + pvdd-supply = <&vreg_v1p8_out>; >> + a2vdd-supply = <&vreg_v1p8_out>; >> + v3p3-supply = <&vreg_v3p3_out>; >> + interrupts-extended = <&tlmm 26 IRQ_TYPE_LEVEL_LOW>; >> + adi,dsi-lanes = <4>; >> + >> + ports { >> + #address-cells = <1>; >> + #size-cells = <0>; >> + >> + port@0 { >> + reg = <0>; >> + >> + adv7535_in: endpoint { >> + remote-endpoint = <&mdss_dsi0_out>; >> + }; >> + }; >> + >> + port@1 { >> + reg = <1>; >> + >> + adv7535_out: endpoint { >> + remote-endpoint = <&hdmi_con_out>; >> + }; >> + }; >> + }; >> + }; >> +}; >> + >> +&mdss_dsi0_out { >> + remote-endpoint = <&adv7535_in>; >> + data-lanes = <0 1 2 3>; >> +}; >> + >> +&pon_pwrkey { >> + status = "okay"; >> +}; >> + >> +&pon_resin { >> + linux,code = ; >> + >> + status = "okay"; >> +}; >> + >> +&sdhc_2 { >> + pinctrl-0 = <&sdc2_state_on>; >> + pinctrl-1 = <&sdc2_state_off>; >> + pinctrl-names = "default", "sleep"; >> + >> + bus-width = <4>; >> + cd-gpios = <&tlmm 99 GPIO_ACTIVE_LOW>; >> + >> + vmmc-supply = <&vreg_l10a>; >> + vqmmc-supply = <&vreg_s4a>; >> + >> + status = "okay"; >> +}; >> -- >> 2.34.1