Re: [PATCH v2 11/11] firmware: qcom: scm: enable SHM bridge

[Maximilian Luz <luzmaximilian@gmail.com>]

On 9/28/23 11:20, Bartosz Golaszewski wrote:
> From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
> 
> Extens the SCM memory allocator with using the SHM Bridge feature if
> available on the platform. This makes the trustzone only use dedicated
> buffers for SCM calls. We map the entire SCM genpool as a bridge.
> 
> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

This patch breaks something in early boot on my Surface Pro X (sc8180x).
Unfortunately I can't provide many details at the moment because the
only thing I can see are RCU stalls, and the traces from them are quite
useless.

Without this patch, the rest of the series (with the fix you posted on
patch 6 applied) seems to work fine. Including both RFT qseecom patches.

I plan to have a closer look at this once I have some more time though.

Regards,
Max

> ---
>   drivers/firmware/qcom/qcom_scm-mem.c | 42 ++++++++++++++++++++++++++--
>   1 file changed, 39 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/firmware/qcom/qcom_scm-mem.c b/drivers/firmware/qcom/qcom_scm-mem.c
> index eafecbe23770..12b12b15f46f 100644
> --- a/drivers/firmware/qcom/qcom_scm-mem.c
> +++ b/drivers/firmware/qcom/qcom_scm-mem.c
> @@ -16,6 +16,8 @@
>   
>   #include "qcom_scm.h"
>   
> +#define QCOM_SHM_BRIDGE_NUM_VM_SHIFT 9
> +
>   static size_t qcom_scm_mem_pool_size = SZ_2M;
>   module_param_named(qcom_scm_mem_pool_size, qcom_scm_mem_pool_size,
>   		   ulong, 0400);
> @@ -108,8 +110,24 @@ phys_addr_t qcom_scm_mem_to_phys(void *vaddr)
>   	return chunk->paddr;
>   }
>   
> +static int qcom_scm_mem_shm_bridge_create(void)
> +{
> +	uint64_t pfn_and_ns_perm, ipfn_and_s_perm, size_and_flags, ns_perms;
> +
> +	ns_perms = (QCOM_SCM_PERM_WRITE | QCOM_SCM_PERM_READ);
> +	pfn_and_ns_perm = (u64)qcom_scm_mem.pbase | ns_perms;
> +	ipfn_and_s_perm = (u64)qcom_scm_mem.pbase | ns_perms;
> +	size_and_flags = qcom_scm_mem.size | (1 << QCOM_SHM_BRIDGE_NUM_VM_SHIFT);
> +
> +	return qcom_scm_create_shm_bridge(qcom_scm_mem.dev, pfn_and_ns_perm,
> +					  ipfn_and_s_perm, size_and_flags,
> +					  QCOM_SCM_VMID_HLOS);
> +}
> +
>   int qcom_scm_mem_enable(struct device *dev)
>   {
> +	int ret;
> +
>   	INIT_RADIX_TREE(&qcom_scm_mem.chunks, GFP_ATOMIC);
>   	spin_lock_init(&qcom_scm_mem.lock);
>   	qcom_scm_mem.dev = dev;
> @@ -128,7 +146,25 @@ int qcom_scm_mem_enable(struct device *dev)
>   
>   	gen_pool_set_algo(qcom_scm_mem.pool, gen_pool_best_fit, NULL);
>   
> -	return gen_pool_add_virt(qcom_scm_mem.pool,
> -				 (unsigned long)qcom_scm_mem.vbase,
> -				 qcom_scm_mem.pbase, qcom_scm_mem.size, -1);
> +	ret = gen_pool_add_virt(qcom_scm_mem.pool,
> +				(unsigned long)qcom_scm_mem.vbase,
> +				qcom_scm_mem.pbase, qcom_scm_mem.size, -1);
> +	if (ret)
> +		return ret;
> +
> +	ret = qcom_scm_enable_shm_bridge();
> +	if (ret) {
> +		if (ret == EOPNOTSUPP)
> +			dev_info(dev, "SHM Bridge not supported\n");
> +		else
> +			return ret;
> +	} else {
> +		ret = qcom_scm_mem_shm_bridge_create();
> +		if (ret)
> +			return ret;
> +
> +		dev_info(dev, "SHM Bridge enabled\n");
> +	}
> +
> +	return 0;
>   }