Re: [PATCH RFC 5/7] arm64: dts: qcom: sm8550: add ports subnodes in usb/dp qmpphy node

[Konrad Dybcio <konrad.dybcio@linaro.org>]

On 1.06.2023 16:07, Neil Armstrong wrote:
> Add the USB3+DP Combo QMP PHY port subnodes in the SM8550 SoC DTSI
> to avoid duplication in the devices DTs.
> 
> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>

Konrad
>  arch/arm64/boot/dts/qcom/sm8550.dtsi | 26 ++++++++++++++++++++++++++
>  1 file changed, 26 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sm8550.dtsi b/arch/arm64/boot/dts/qcom/sm8550.dtsi
> index b41b3981b3ce..ca2280041f83 100644
> --- a/arch/arm64/boot/dts/qcom/sm8550.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8550.dtsi
> @@ -2838,6 +2838,32 @@ usb_dp_qmpphy: phy@88e8000 {
>  			#phy-cells = <1>;
>  
>  			status = "disabled";
> +
> +			ports {
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +
> +				port@0 {
> +					reg = <0>;
> +
> +					usb_dp_qmpphy_out: endpoint {
> +					};
> +				};
> +
> +				port@1 {
> +					reg = <1>;
> +
> +					usb_dp_qmpphy_usb_ss_in: endpoint {
> +					};
> +				};
> +
> +				port@2 {
> +					reg = <2>;
> +
> +					usb_dp_qmpphy_dp_in: endpoint {
> +					};
> +				};
> +			};
>  		};
>  
>  		usb_1: usb@a6f8800 {
>