Re: [PATCH v3 0/2] phy: qcom: Add driver for QCOM APQ8064 SATA PHY

[Kishon Vijay Abraham I <kishon@ti.com>]

On Monday 14 July 2014 02:17 PM, Srinivas Kandagatla wrote:
> Hi Kishon,
> 
> First patch in this series adds support to the APQ8064 SATA PHY.
> Second patch updates the existing Kumar gala's device tree PHY bindings
> with APQ8064 soc specific compatible.
> 
> Eventhough there are two seperate drivers for both IPQ and APQ SOCs,
> the bindings are exactly same, so I did not create new bindings document.

Er.. create a separate binding.
> 
> Could you please pick these patches for v3.17.

Sure. please rebase to linux-phy next and re-send.

Thanks
Kishon
> 
> Changes since v2:
> 	- added usleep_range in poll timeout as discussed
> 		with Bartlomiej Zolnierkiewicz.
> 	- Added missing pdev_set_drvdata spotted by 
> 		Bartlomiej Zolnierkiewicz
> 
> Changes since v1:
> 	- included DT bindings in the series.
> 
> Thanks,
> srini
> 
> Srinivas Kandagatla (2):
>   phy: qcom: Add driver for QCOM APQ8064 SATA PHY
>   phy: qcom: Update APQ8064 PHY device tree bindings
> 
>  Documentation/devicetree/bindings/phy/qcom-phy.txt |   3 +-
>  drivers/phy/Kconfig                                |   7 +
>  drivers/phy/Makefile                               |   1 +
>  drivers/phy/phy-qcom-apq8064-sata.c                | 288 +++++++++++++++++++++
>  4 files changed, 298 insertions(+), 1 deletion(-)
>  create mode 100644 drivers/phy/phy-qcom-apq8064-sata.c
>