From: Jeffrey Hugo <jhugo@codeaurora.org>
To: Marc Gonzalez <marc.w.gonzalez@free.fr>,
MSM <linux-arm-msm@vger.kernel.org>,
LKML <linux-kernel@vger.kernel.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>,
Andy Gross <andy.gross@linaro.org>,
David Brown <david.brown@linaro.org>,
Evan Green <evgreen@chromium.org>,
Douglas Anderson <dianders@chromium.org>,
Alim Akhtar <alim.akhtar@samsung.com>,
Avri Altman <avri.altman@wdc.com>,
Pedro Sousa <pedrom.sousa@synopsys.com>,
Subhash Jadavani <subhashj@codeaurora.org>,
Bart Van Assche <bvanassche@acm.org>,
SCSI <linux-scsi@vger.kernel.org>
Subject: Re: [PATCH v3 5/5] Revert "scsi: ufs: disable vccq if it's not needed by UFS device"
Date: Mon, 4 Feb 2019 11:11:04 -0700 [thread overview]
Message-ID: <53ac0ac5-9b98-e9d7-08a6-0cbde1c1edb0@codeaurora.org> (raw)
In-Reply-To: <70618c25-83f0-b9db-51a3-c1d74b605a45@free.fr>
On 2/4/2019 10:42 AM, Marc Gonzalez wrote:
> This reverts commit 60f0187031c05e04cbadffb62f557d0ff3564490.
>
> Calling ufshcd_set_vccq_rail_unused hangs my system.
> It seems vccq is not *not* needed.
>
> Signed-off-by: Marc Gonzalez <marc.w.gonzalez@free.fr>
> ---
Reviewed-by: Jeffrey Hugo <jhugo@codeaurora.org>
> drivers/scsi/ufs/ufs.h | 1 -
> drivers/scsi/ufs/ufshcd.c | 59 +++------------------------------------
> 2 files changed, 4 insertions(+), 56 deletions(-)
>
> diff --git a/drivers/scsi/ufs/ufs.h b/drivers/scsi/ufs/ufs.h
> index dd65fea07687..7da7318eb6a6 100644
> --- a/drivers/scsi/ufs/ufs.h
> +++ b/drivers/scsi/ufs/ufs.h
> @@ -514,7 +514,6 @@ struct ufs_vreg {
> struct regulator *reg;
> const char *name;
> bool enabled;
> - bool unused;
> int min_uV;
> int max_uV;
> int min_uA;
> diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
> index 9ba7671b84f8..8b9a01073d62 100644
> --- a/drivers/scsi/ufs/ufshcd.c
> +++ b/drivers/scsi/ufs/ufshcd.c
> @@ -245,7 +245,6 @@ static int ufshcd_probe_hba(struct ufs_hba *hba);
> static int __ufshcd_setup_clocks(struct ufs_hba *hba, bool on,
> bool skip_ref_clk);
> static int ufshcd_setup_clocks(struct ufs_hba *hba, bool on);
> -static int ufshcd_set_vccq_rail_unused(struct ufs_hba *hba, bool unused);
> static int ufshcd_uic_hibern8_exit(struct ufs_hba *hba);
> static int ufshcd_uic_hibern8_enter(struct ufs_hba *hba);
> static inline void ufshcd_add_delay_before_dme_cmd(struct ufs_hba *hba);
> @@ -6819,11 +6818,6 @@ static int ufshcd_probe_hba(struct ufs_hba *hba)
> ufs_fixup_device_setup(hba, &card);
> ufshcd_tune_unipro_params(hba);
>
> - ret = ufshcd_set_vccq_rail_unused(hba,
> - (hba->dev_quirks & UFS_DEVICE_NO_VCCQ) ? true : false);
> - if (ret)
> - goto out;
> -
> /* UFS device is also active now */
> ufshcd_set_ufs_dev_active(hba);
> ufshcd_force_reset_auto_bkops(hba);
> @@ -7007,24 +7001,13 @@ static int ufshcd_config_vreg_load(struct device *dev, struct ufs_vreg *vreg,
> static inline int ufshcd_config_vreg_lpm(struct ufs_hba *hba,
> struct ufs_vreg *vreg)
> {
> - if (!vreg)
> - return 0;
> - else if (vreg->unused)
> - return 0;
> - else
> - return ufshcd_config_vreg_load(hba->dev, vreg,
> - UFS_VREG_LPM_LOAD_UA);
> + return ufshcd_config_vreg_load(hba->dev, vreg, UFS_VREG_LPM_LOAD_UA);
> }
>
> static inline int ufshcd_config_vreg_hpm(struct ufs_hba *hba,
> struct ufs_vreg *vreg)
> {
> - if (!vreg)
> - return 0;
> - else if (vreg->unused)
> - return 0;
> - else
> - return ufshcd_config_vreg_load(hba->dev, vreg, vreg->max_uA);
> + return ufshcd_config_vreg_load(hba->dev, vreg, vreg->max_uA);
> }
>
> static int ufshcd_config_vreg(struct device *dev,
> @@ -7062,9 +7045,7 @@ static int ufshcd_enable_vreg(struct device *dev, struct ufs_vreg *vreg)
> {
> int ret = 0;
>
> - if (!vreg)
> - goto out;
> - else if (vreg->enabled || vreg->unused)
> + if (!vreg || vreg->enabled)
> goto out;
>
> ret = ufshcd_config_vreg(dev, vreg, true);
> @@ -7084,9 +7065,7 @@ static int ufshcd_disable_vreg(struct device *dev, struct ufs_vreg *vreg)
> {
> int ret = 0;
>
> - if (!vreg)
> - goto out;
> - else if (!vreg->enabled || vreg->unused)
> + if (!vreg || !vreg->enabled)
> goto out;
>
> ret = regulator_disable(vreg->reg);
> @@ -7192,36 +7171,6 @@ static int ufshcd_init_hba_vreg(struct ufs_hba *hba)
> return 0;
> }
>
> -static int ufshcd_set_vccq_rail_unused(struct ufs_hba *hba, bool unused)
> -{
> - int ret = 0;
> - struct ufs_vreg_info *info = &hba->vreg_info;
> -
> - if (!info)
> - goto out;
> - else if (!info->vccq)
> - goto out;
> -
> - if (unused) {
> - /* shut off the rail here */
> - ret = ufshcd_toggle_vreg(hba->dev, info->vccq, false);
> - /*
> - * Mark this rail as no longer used, so it doesn't get enabled
> - * later by mistake
> - */
> - if (!ret)
> - info->vccq->unused = true;
> - } else {
> - /*
> - * rail should have been already enabled hence just make sure
> - * that unused flag is cleared.
> - */
> - info->vccq->unused = false;
> - }
> -out:
> - return ret;
> -}
> -
> static int __ufshcd_setup_clocks(struct ufs_hba *hba, bool on,
> bool skip_ref_clk)
> {
>
--
Jeffrey Hugo
Qualcomm Datacenter Technologies as an affiliate of Qualcomm
Technologies, Inc.
Qualcomm Technologies, Inc. is a member of the
Code Aurora Forum, a Linux Foundation Collaborative Project.
next prev parent reply other threads:[~2019-02-04 18:11 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-02-04 17:34 [PATCH v3 0/5] UFS on APQ8098/MSM8998 Marc Gonzalez
2019-02-04 17:36 ` [PATCH v3 1/5] arm64: dts: qcom: msm8998: Add UFS nodes Marc Gonzalez
2019-02-04 18:06 ` Jeffrey Hugo
2019-02-06 10:58 ` Marc Gonzalez
2019-02-04 17:37 ` [PATCH v3 2/5] arm64: dts: qcom: msm8998: Allow drivers to set-load Marc Gonzalez
2019-02-04 18:06 ` Jeffrey Hugo
2019-02-04 17:38 ` [PATCH v3 3/5] dt-bindings: phy-qcom-qmp: Add qcom,msm8998-qmp-ufs-phy Marc Gonzalez
2019-02-04 18:08 ` Jeffrey Hugo
2019-02-04 17:39 ` [PATCH v3 4/5] phy: qcom-qmp: Add QMP UFS PHY support for msm8998 Marc Gonzalez
2019-02-04 18:10 ` Jeffrey Hugo
2019-02-06 12:39 ` Kishon Vijay Abraham I
2019-02-06 12:44 ` Marc Gonzalez
2019-02-04 17:42 ` [PATCH v3 5/5] Revert "scsi: ufs: disable vccq if it's not needed by UFS device" Marc Gonzalez
2019-02-04 18:11 ` Jeffrey Hugo [this message]
2019-02-04 19:51 ` Avri Altman
2019-02-04 20:23 ` Jeffrey Hugo
2019-02-04 20:27 ` Bjorn Andersson
2019-02-05 4:58 ` Alim Akhtar
2019-02-05 6:27 ` Bjorn Andersson
2019-02-05 10:52 ` Alim Akhtar
2019-02-05 19:46 ` Bjorn Andersson
2019-02-06 15:23 ` Alim Akhtar
2019-02-05 17:24 ` Marc Gonzalez
2019-02-05 17:51 ` Marc Gonzalez
2019-02-05 18:19 ` Evan Green
2019-02-05 19:37 ` Jeffrey Hugo
2019-02-06 14:53 ` Marc Gonzalez
2019-02-06 14:59 ` Marc Gonzalez
2019-02-06 15:27 ` Alim Akhtar
2019-02-06 15:52 ` Marc Gonzalez
2019-02-07 8:50 ` Alim Akhtar
2019-02-07 14:52 ` Jeffrey Hugo
2019-02-08 9:09 ` Alim Akhtar
2019-02-08 10:03 ` Marc Gonzalez
2019-02-08 14:59 ` Jeffrey Hugo
2019-02-09 8:42 ` Alim Akhtar
2019-02-09 11:49 ` Marc Gonzalez
2019-02-10 15:58 ` Jeffrey Hugo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=53ac0ac5-9b98-e9d7-08a6-0cbde1c1edb0@codeaurora.org \
--to=jhugo@codeaurora.org \
--cc=alim.akhtar@samsung.com \
--cc=andy.gross@linaro.org \
--cc=avri.altman@wdc.com \
--cc=bjorn.andersson@linaro.org \
--cc=bvanassche@acm.org \
--cc=david.brown@linaro.org \
--cc=dianders@chromium.org \
--cc=evgreen@chromium.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=marc.w.gonzalez@free.fr \
--cc=pedrom.sousa@synopsys.com \
--cc=subhashj@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).