* [PATCH v4] ARM: dts: qcom: add CM-QS600 board
@ 2014-10-01 16:09 Mike Rapoport
2014-10-10 7:36 ` Igor Grinberg
0 siblings, 1 reply; 2+ messages in thread
From: Mike Rapoport @ 2014-10-01 16:09 UTC (permalink / raw)
To: Kumar Gala
Cc: Srinivas Kandagatla, Bjorn Andersson, Igor Grinberg,
linux-arm-msm, linux-arm-kernel, Mike Rapoport
CM-QS600 is a APQ8064 based computer on module.
The details are available at
http://compulab.co.il/products/computer-on-modules/cm-qs600/
Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Acked-by: Igor Grinberg <grinberg@compulab.co.il>
---
v2 changes: duplicate the settings for the cm-qs600 board in its .dts file as Kumar suggested
v3 changes: add board details and keep dts Makefile sorted alphabetically
v4 changes: fix eeprom defintion and update subject as per Igor's comments
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts | 59 +++++++++++++++++++++++++++++
2 files changed, 60 insertions(+)
create mode 100644 arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index aaa1a68..3243722 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -339,6 +339,7 @@ dtb-$(CONFIG_ARCH_ORION5X) += orion5x-lacie-d2-network.dtb \
orion5x-rd88f5182-nas.dtb
dtb-$(CONFIG_ARCH_PRIMA2) += prima2-evb.dtb
dtb-$(CONFIG_ARCH_QCOM) += \
+ qcom-apq8064-cm-qs600.dtb \
qcom-apq8064-ifc6410.dtb \
qcom-apq8074-dragonboard.dtb \
qcom-apq8084-ifc6540.dtb \
diff --git a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
new file mode 100644
index 0000000..5d75666
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
@@ -0,0 +1,59 @@
+#include "qcom-apq8064-v2.0.dtsi"
+
+/ {
+ model = "CompuLab CM-QS600";
+ compatible = "qcom,apq8064-cm-qs600", "qcom,apq8064";
+
+ soc {
+ pinctrl@800000 {
+ i2c1_pins: i2c1 {
+ mux {
+ pins = "gpio20", "gpio21";
+ function = "gsbi1";
+ };
+ };
+ };
+
+ gsbi@12440000 {
+ status = "okay";
+ qcom,mode = <GSBI_PROT_I2C>;
+
+ i2c@12460000 {
+ status = "okay";
+ clock-frequency = <200000>;
+ pinctrl-0 = <&i2c1_pins>;
+ pinctrl-names = "default";
+
+ eeprom: eeprom@50 {
+ compatible = "24c02";
+ reg = <0x50>;
+ pagesize = <32>;
+ };
+ };
+ };
+
+ gsbi@16600000 {
+ status = "ok";
+ qcom,mode = <GSBI_PROT_I2C_UART>;
+ serial@16640000 {
+ status = "ok";
+ };
+ };
+
+ amba {
+ /* eMMC */
+ sdcc1: sdcc@12400000 {
+ status = "okay";
+ };
+
+ /* External micro SD card */
+ sdcc3: sdcc@12180000 {
+ status = "okay";
+ };
+ /* WLAN */
+ sdcc4: sdcc@121c0000 {
+ status = "okay";
+ };
+ };
+ };
+};
--
1.9.1
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH v4] ARM: dts: qcom: add CM-QS600 board
2014-10-01 16:09 [PATCH v4] ARM: dts: qcom: add CM-QS600 board Mike Rapoport
@ 2014-10-10 7:36 ` Igor Grinberg
0 siblings, 0 replies; 2+ messages in thread
From: Igor Grinberg @ 2014-10-10 7:36 UTC (permalink / raw)
To: Kumar Gala
Cc: Mike Rapoport, Srinivas Kandagatla, Bjorn Andersson,
linux-arm-msm, linux-arm-kernel, Nicolas Dechesne, devicetree
Hi Kumar,
As I've understand from Kevin's letter, we can submit the DT only
platforms addition also for 3.18.
Can we please have this one applied?
Thanks!
On 10/01/14 19:09, Mike Rapoport wrote:
> CM-QS600 is a APQ8064 based computer on module.
> The details are available at
> http://compulab.co.il/products/computer-on-modules/cm-qs600/
>
> Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
> Acked-by: Igor Grinberg <grinberg@compulab.co.il>
> ---
> v2 changes: duplicate the settings for the cm-qs600 board in its .dts file as Kumar suggested
> v3 changes: add board details and keep dts Makefile sorted alphabetically
> v4 changes: fix eeprom defintion and update subject as per Igor's comments
>
> arch/arm/boot/dts/Makefile | 1 +
> arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts | 59 +++++++++++++++++++++++++++++
> 2 files changed, 60 insertions(+)
> create mode 100644 arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index aaa1a68..3243722 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -339,6 +339,7 @@ dtb-$(CONFIG_ARCH_ORION5X) += orion5x-lacie-d2-network.dtb \
> orion5x-rd88f5182-nas.dtb
> dtb-$(CONFIG_ARCH_PRIMA2) += prima2-evb.dtb
> dtb-$(CONFIG_ARCH_QCOM) += \
> + qcom-apq8064-cm-qs600.dtb \
> qcom-apq8064-ifc6410.dtb \
> qcom-apq8074-dragonboard.dtb \
> qcom-apq8084-ifc6540.dtb \
> diff --git a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
> new file mode 100644
> index 0000000..5d75666
> --- /dev/null
> +++ b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
> @@ -0,0 +1,59 @@
> +#include "qcom-apq8064-v2.0.dtsi"
> +
> +/ {
> + model = "CompuLab CM-QS600";
> + compatible = "qcom,apq8064-cm-qs600", "qcom,apq8064";
> +
> + soc {
> + pinctrl@800000 {
> + i2c1_pins: i2c1 {
> + mux {
> + pins = "gpio20", "gpio21";
> + function = "gsbi1";
> + };
> + };
> + };
> +
> + gsbi@12440000 {
> + status = "okay";
> + qcom,mode = <GSBI_PROT_I2C>;
> +
> + i2c@12460000 {
> + status = "okay";
> + clock-frequency = <200000>;
> + pinctrl-0 = <&i2c1_pins>;
> + pinctrl-names = "default";
> +
> + eeprom: eeprom@50 {
> + compatible = "24c02";
> + reg = <0x50>;
> + pagesize = <32>;
> + };
> + };
> + };
> +
> + gsbi@16600000 {
> + status = "ok";
> + qcom,mode = <GSBI_PROT_I2C_UART>;
> + serial@16640000 {
> + status = "ok";
> + };
> + };
> +
> + amba {
> + /* eMMC */
> + sdcc1: sdcc@12400000 {
> + status = "okay";
> + };
> +
> + /* External micro SD card */
> + sdcc3: sdcc@12180000 {
> + status = "okay";
> + };
> + /* WLAN */
> + sdcc4: sdcc@121c0000 {
> + status = "okay";
> + };
> + };
> + };
> +};
>
--
Regards,
Igor.
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2014-10-10 7:36 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2014-10-01 16:09 [PATCH v4] ARM: dts: qcom: add CM-QS600 board Mike Rapoport
2014-10-10 7:36 ` Igor Grinberg
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).