From mboxrd@z Thu Jan 1 00:00:00 1970 From: Archit Taneja Subject: Re: [PATCH 1/5] clk: qcom: Add EBI2 clocks for IPQ806x Date: Mon, 19 Jan 2015 16:02:10 +0530 Message-ID: <54BCDD2A.90208@codeaurora.org> References: <1421419702-17812-1-git-send-email-architt@codeaurora.org> <1421419702-17812-2-git-send-email-architt@codeaurora.org> <54B9890C.2080506@codeaurora.org> Mime-Version: 1.0 Content-Type: text/plain; charset=windows-1252; format=flowed Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <54B9890C.2080506@codeaurora.org> Sender: linux-kernel-owner@vger.kernel.org To: Stephen Boyd , linux-mtd@lists.infradead.org, linux-arm-msm@vger.kernel.org Cc: galak@codeaurora.org, linux-kernel@vger.kernel.org, agross@codeaurora.org List-Id: linux-arm-msm@vger.kernel.org Hi, On 01/17/2015 03:26 AM, Stephen Boyd wrote: > On 01/16/2015 06:48 AM, Archit Taneja wrote: >> The NAND controller within EBI2 requires EBI2_CLK and EBI2_ALWAYS_ON_CLK clocks. >> Create structs for these clocks so that they can be used by the NAND controller >> driver. Add an entry for EBI2_AON_CLK in the gcc-ipq806x DT binding document. >> >> Cc: Stephen Boyd >> Signed-off-by: Archit Taneja > > Looks ok. I couldn't find this used in the downstream sources though. > Can you point me to it? I'm mostly worried that this is a shared > resource that never should be turned off, so exposing it to drivers may > not be the right idea. I'll share the sources. > >> +static struct clk_branch ebi2_aon_clk = { >> + .hwcg_reg = 0x3b00, >> + .hwcg_bit = 6, >> + .halt_reg = 0x2fcc, >> + .halt_bit = 0, >> + .clkr = { >> + .enable_reg = 0x3b00, >> + .enable_mask = BIT(8), >> + .hw.init = &(struct clk_init_data){ >> + .name = "ebi2_always_on_clk", >> > > Can this be ebi2_aon_clk to match the macro? > I'll fix this. Thanks, Archit -- Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project