From: Stephen Boyd <sboyd@codeaurora.org>
To: Lee Jones <lee.jones@linaro.org>, Josh Cartwright <joshc@codeaurora.org>
Cc: Bjorn Andersson <bjorn.andersson@sonymobile.com>,
linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
Rob Herring <robh+dt@kernel.org>, Pawel Moll <pawel.moll@arm.com>,
Mark Rutland <mark.rutland@arm.com>,
Ian Campbell <ijc+devicetree@hellion.org.uk>,
Kumar Gala <galak@codeaurora.org>,
devicetree@vger.kernel.org
Subject: Re: [PATCH 1/3] mfd: devicetree: qcom_rpm: document IPQ8064 resources
Date: Wed, 18 Mar 2015 17:53:01 -0700 [thread overview]
Message-ID: <550A1DED.3070008@codeaurora.org> (raw)
In-Reply-To: <20141124103812.GG4241@x1>
On 11/24/14 02:38, Lee Jones wrote:
> On Thu, 20 Nov 2014, Josh Cartwright wrote:
>
>> The IPQ8064 SoC has several RPM-controlled resources, an NSS fabrick
>> clock and four regulator resources. Provide definitions for them.
>>
>> Signed-off-by: Josh Cartwright <joshc@codeaurora.org>
>> ---
>> Documentation/devicetree/bindings/mfd/qcom-rpm.txt | 6 +++++-
>> include/dt-bindings/mfd/qcom-rpm.h | 6 ++++++
>> 2 files changed, 11 insertions(+), 1 deletion(-)
> For my own reference:
>
> Acked-by: Lee Jones <lee.jones@linaro.org>
Lee, can you pick this patch up please?
>
>> diff --git a/Documentation/devicetree/bindings/mfd/qcom-rpm.txt b/Documentation/devicetree/bindings/mfd/qcom-rpm.txt
>> index 4264021..6d4e3ec 100644
>> --- a/Documentation/devicetree/bindings/mfd/qcom-rpm.txt
>> +++ b/Documentation/devicetree/bindings/mfd/qcom-rpm.txt
>> @@ -12,6 +12,7 @@ frequencies.
>> "qcom,rpm-apq8064"
>> "qcom,rpm-msm8660"
>> "qcom,rpm-msm8960"
>> + "qcom,rpm-ipq8064"
>>
>> - reg:
>> Usage: required
>> @@ -67,6 +68,7 @@ of valid subnodes that can operate on these resources.
>> "qcom,rpm-pm8901-ftsmps"
>> "qcom,rpm-pm8921-smps"
>> "qcom,rpm-pm8921-ftsmps"
>> + "qcom,rpm-smb208"
>>
>> - reg:
>> Usage: required
>> @@ -76,7 +78,9 @@ of valid subnodes that can operate on these resources.
>> QCOM_RPM_PM8058_SMPS0 - QCOM_RPM_PM8058_SMPS4,
>> QCOM_RPM_PM8821_SMPS1 - QCOM_RPM_PM8821_SMPS2,
>> QCOM_RPM_PM8901_SMPS0 - QCOM_RPM_PM8901_SMPS4,
>> - QCOM_RPM_PM8921_SMPS1 - QCOM_RPM_PM8921_SMPS8
>> + QCOM_RPM_PM8921_SMPS1 - QCOM_RPM_PM8921_SMPS8,
>> + QCOM_RPM_SMB208_S1a, QCOM_RPM_SMB208_S1b,
>> + QCOM_RPM_SMB208_S2a, QCOM_RPM_SMB208_S2b
>>
>> - bias-pull-down:
>> Usage: optional
>> diff --git a/include/dt-bindings/mfd/qcom-rpm.h b/include/dt-bindings/mfd/qcom-rpm.h
>> index 388a6f3..13a9d4b 100644
>> --- a/include/dt-bindings/mfd/qcom-rpm.h
>> +++ b/include/dt-bindings/mfd/qcom-rpm.h
>> @@ -141,6 +141,12 @@
>> #define QCOM_RPM_SYS_FABRIC_MODE 131
>> #define QCOM_RPM_USB_OTG_SWITCH 132
>> #define QCOM_RPM_VDDMIN_GPIO 133
>> +#define QCOM_RPM_NSS_FABRIC_0_CLK 134
>> +#define QCOM_RPM_NSS_FABRIC_1_CLK 135
>> +#define QCOM_RPM_SMB208_S1a 136
>> +#define QCOM_RPM_SMB208_S1b 137
>> +#define QCOM_RPM_SMB208_S2a 138
>> +#define QCOM_RPM_SMB208_S2b 139
>>
>> /*
>> * Constants used to select force mode for regulators.
--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project
next prev parent reply other threads:[~2015-03-19 0:53 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-11-20 19:41 [PATCH 0/3] qcom_rpm: add support for IPQ8064 resources Josh Cartwright
[not found] ` <1416512485-7292-1-git-send-email-joshc-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2014-11-20 19:41 ` [PATCH 1/3] mfd: devicetree: qcom_rpm: document " Josh Cartwright
2014-11-24 10:33 ` Lee Jones
2014-11-24 10:38 ` Lee Jones
2015-03-19 0:53 ` Stephen Boyd [this message]
2015-03-19 10:04 ` Lee Jones
2015-03-19 10:11 ` Lee Jones
2014-11-20 19:41 ` [PATCH 2/3] mfd: qcom_rpm: add support for IPQ8064 Josh Cartwright
2014-11-24 10:38 ` Lee Jones
2015-03-19 0:52 ` Stephen Boyd
2015-03-19 10:04 ` Lee Jones
2015-03-26 14:19 ` Lee Jones
2014-11-20 19:41 ` [PATCH 3/3] regulator: rpm: add support for RPM-controller SMB208 Josh Cartwright
2014-11-21 18:13 ` Mark Brown
2014-11-21 18:25 ` Bjorn Andersson
2014-11-21 19:21 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=550A1DED.3070008@codeaurora.org \
--to=sboyd@codeaurora.org \
--cc=bjorn.andersson@sonymobile.com \
--cc=devicetree@vger.kernel.org \
--cc=galak@codeaurora.org \
--cc=ijc+devicetree@hellion.org.uk \
--cc=joshc@codeaurora.org \
--cc=lee.jones@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=pawel.moll@arm.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).