From mboxrd@z Thu Jan  1 00:00:00 1970
From: Stephen Boyd <sboyd@codeaurora.org>
Subject: Re: [PATCH v2 5/5] regulator: qcom: Rework to single platform device
Date: Thu, 02 Apr 2015 16:02:28 -0700
Message-ID: <551DCA84.5050500@codeaurora.org>
References: <1427928946-31291-1-git-send-email-bjorn.andersson@sonymobile.com> <1427928946-31291-6-git-send-email-bjorn.andersson@sonymobile.com>
Mime-Version: 1.0
Content-Type: text/plain; charset=windows-1252
Content-Transfer-Encoding: 7bit
Return-path: <linux-arm-msm-owner@vger.kernel.org>
Received: from smtp.codeaurora.org ([198.145.29.96]:41429 "EHLO
	smtp.codeaurora.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org
	with ESMTP id S1751295AbbDBXCa (ORCPT
	<rfc822;linux-arm-msm@vger.kernel.org>);
	Thu, 2 Apr 2015 19:02:30 -0400
In-Reply-To: <1427928946-31291-6-git-send-email-bjorn.andersson@sonymobile.com>
Sender: linux-arm-msm-owner@vger.kernel.org
List-Id: linux-arm-msm@vger.kernel.org
To: Bjorn Andersson <bjorn.andersson@sonymobile.com>, Liam Girdwood <lgirdwood@gmail.com>, Mark Brown <broonie@kernel.org>
Cc: Andy Gross <agross@codeaurora.org>, Srinivas Kandagatla <srinivas.kandagatla@linaro.org>, linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org

On 04/01/15 15:55, Bjorn Andersson wrote:
> +static int rpm_reg_probe(struct platform_device *pdev)
> +{
> +	const struct rpm_regulator_data *reg;
> +	const struct of_device_id *match;
> +	struct regulator_config config = { };
> +	struct regulator_dev *rdev;
> +	struct qcom_rpm_reg *vreg;
>  
> -	ret = rpm_reg_of_parse(pdev->dev.of_node, &vreg->desc, &config);
> -	if (ret)
> -		return ret;
> +	match = of_match_device(rpm_of_match, &pdev->dev);
> +	for (reg = match->data; reg->name; reg++) {
> +		vreg = devm_kmalloc(&pdev->dev, sizeof(*vreg), GFP_KERNEL);
> +		if (!vreg) {
> +			dev_err(&pdev->dev, "failed to allocate vreg\n");

Please remove useless error message on allocation failures.

> +			return -ENOMEM;
> +		}
> +		memcpy(vreg, reg->template, sizeof(*vreg));
> +		mutex_init(&vreg->lock);
> +
> +		vreg->dev = &pdev->dev;
> +		vreg->resource = reg->resource;
> +
> +		vreg->desc.id = -1;
> +		vreg->desc.owner = THIS_MODULE;
> +		vreg->desc.type = REGULATOR_VOLTAGE;
> +		vreg->desc.name = reg->name;
> +		vreg->desc.supply_name = reg->supply;
> +		vreg->desc.of_match = reg->name;
> +		vreg->desc.of_parse_cb = rpm_reg_of_parse;
> +
> +		vreg->rpm = dev_get_drvdata(pdev->dev.parent);
> +		if (!vreg->rpm) {
> +			dev_err(&pdev->dev, "unable to retrieve handle to rpm\n");
> +			return -ENODEV;
> +		}

Was there going to be a patch to lift this out of the loop (although I
hope the compiler can hoist it out).

>  
> -	rdev = devm_regulator_register(&pdev->dev, &vreg->desc, &config);
> -	if (IS_ERR(rdev)) {
> -		dev_err(&pdev->dev, "can't register regulator\n");
> -		return PTR_ERR(rdev);
> +		config.dev = &pdev->dev;
> +		config.driver_data = vreg;
> +		rdev = devm_regulator_register(&pdev->dev, &vreg->desc, &config);
> +		if (IS_ERR(rdev)) {
> +			dev_err(&pdev->dev, "can't register regulator\n");

It'd be nice to know which regulator failed to register.

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project