Re: [RFC PATCH v2 4/5] drm/msm/dp: replace dp_connector with drm_bridge_connector

[Kuogee Hsieh <quic_khsieh@quicinc.com>]

On 2/23/2022 1:33 PM, Stephen Boyd wrote:
> Quoting Kuogee Hsieh (2022-02-23 10:27:26)
>> On 2/23/2022 10:22 AM, Dmitry Baryshkov wrote:
>>> On 23/02/2022 20:21, Kuogee Hsieh wrote:
>>>
>>> In the panel device node.
>>>
>>> Can you please share it too?
>>
>> &soc {
>>           edp_power_supply: edp_power {
>>                   compatible = "regulator-fixed";
>>                   regulator-name = "edp_backlight_power";
>>
>>                   regulator-always-on;
>>                   regulator-boot-on;
>>           };
>>
>>           edp_backlight: edp_backlight {
>>                   compatible = "pwm-backlight";
>>
>>                   pwms = <&pm8350c_pwm 3 65535>;
>>                   power-supply = <&edp_power_supply>;
>>                   enable-gpio = <&pm8350c_gpios 7 GPIO_ACTIVE_HIGH>;
>>
>>                   pinctrl-names = "default";
>>                   pinctrl-0 = <&backlight_pwm_default>;
>>           };
>>
>>           edp_panel: edp_panel {
>>                   compatible = "sharp_lq140m1jw46";
> Is that supposed to be sharp,lq140m1jw46 with a comma instead of an
> underscore?

Stephen,

This is our internal branch which does not have patches up to date yet.

I will cherry-pick newer edp related patches which are under review now 
to re test it.