From: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
To: Khalid Faisal Ansari <khalid.ansari@oss.qualcomm.com>,
Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konradybcio@kernel.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>
Cc: linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH v3] arm64: dts: qcom: hamoa-iot-evk: Enable TPM (ST33) on SPI11
Date: Wed, 12 Nov 2025 10:28:01 +0100 [thread overview]
Message-ID: <55eb7543-7b88-42e2-bb11-7c54c4e59801@oss.qualcomm.com> (raw)
In-Reply-To: <20251112-arm64-dts-qcom-hamoa-iot-evk-enable-st33-tpm-on-spi11-v3-1-39b19eb55cc3@oss.qualcomm.com>
On 11/12/25 8:42 AM, Khalid Faisal Ansari wrote:
> Enable ST33HTPM TPM over SPI11 on the Hamoa IoT EVK by adding the
> required SPI and TPM nodes.
>
> Signed-off-by: Khalid Faisal Ansari <khalid.ansari@oss.qualcomm.com>
> ---
> Testing:
> - TPM detected via tpm_tis_spi
> - Verified functionality using tpm2-tools (e.g. tpm2_getrandom, tpm2_rsadecrypt)
>
> Depends on:
> - <20251106102448.3585332-1-xueyao.an@oss.qualcomm.com>
> Link: https://lore.kernel.org/linux-arm-msm/20251106102448.3585332-1-xueyao.an@oss.qualcomm.com/
> ---
> Changes in v3:
> - Squashed patches touching the same file into one.
Doesn't seem to be the case
Konrad
> - Link to v2: https://lore.kernel.org/r/20251111-arm64-dts-qcom-hamoa-iot-evk-enable-st33-tpm-on-spi11-v2-0-101a801974b6@oss.qualcomm.com
>
> Changes in v2:
> - Use "tcg,tpm_tis-spi" compatible to satisfy dtbs_check (was vendor-only).
> - Add dependency change in cover letter.
> - Link to v1: https://lore.kernel.org/r/20251107-arm64-dts-qcom-hamoa-iot-evk-enable-st33-tpm-on-spi11-v1-1-8ba83b58fca7@oss.qualcomm.com
> ---
> arch/arm64/boot/dts/qcom/hamoa-iot-evk.dts | 10 ++++++++++
> 1 file changed, 10 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/hamoa-iot-evk.dts b/arch/arm64/boot/dts/qcom/hamoa-iot-evk.dts
> index 36dd6599402b..aecaebebcef5 100644
> --- a/arch/arm64/boot/dts/qcom/hamoa-iot-evk.dts
> +++ b/arch/arm64/boot/dts/qcom/hamoa-iot-evk.dts
> @@ -917,6 +917,16 @@ &smb2360_2_eusb2_repeater {
> vdd3-supply = <&vreg_l8b_3p0>;
> };
>
> +&spi11 {
> + status = "okay";
> +
> + tpm@0 {
> + compatible = "st,st33htpm-spi", "tcg,tpm_tis-spi";
> + reg = <0>;
> + spi-max-frequency = <20000000>;
> + };
> +};
> +
> &swr0 {
> status = "okay";
>
>
> ---
> base-commit: 9c0826a5d9aa4d52206dd89976858457a2a8a7ed
> change-id: 20251107-arm64-dts-qcom-hamoa-iot-evk-enable-st33-tpm-on-spi11-c8353d7fe82e
>
> Best regards,
next prev parent reply other threads:[~2025-11-12 9:28 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-11-12 7:42 [PATCH v3] arm64: dts: qcom: hamoa-iot-evk: Enable TPM (ST33) on SPI11 Khalid Faisal Ansari
2025-11-12 9:28 ` Konrad Dybcio [this message]
2025-11-12 11:09 ` Konrad Dybcio
2025-12-10 9:28 ` Khalid Faisal Ansari
2026-01-07 10:26 ` Khalid Faisal Ansari
2026-01-10 19:11 ` Bjorn Andersson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=55eb7543-7b88-42e2-bb11-7c54c4e59801@oss.qualcomm.com \
--to=konrad.dybcio@oss.qualcomm.com \
--cc=andersson@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=khalid.ansari@oss.qualcomm.com \
--cc=konradybcio@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox