From: Archit Taneja <architt@codeaurora.org>
To: Rob Clark <robdclark@gmail.com>
Cc: linux-arm-msm <linux-arm-msm@vger.kernel.org>,
"dri-devel@lists.freedesktop.org"
<dri-devel@lists.freedesktop.org>
Subject: Re: [PATCH] drm/msm/mdp5: high precision vblank timestamp support
Date: Tue, 27 Oct 2015 10:46:25 +0530 [thread overview]
Message-ID: <562F08A9.2060307@codeaurora.org> (raw)
In-Reply-To: <CAF6AEGsNCT4ByYzD1DPyFrR4ROjs7_aBarxZEviWdBoy48-=iw@mail.gmail.com>
On 10/27/2015 05:33 AM, Rob Clark wrote:
> On Mon, Oct 26, 2015 at 5:54 AM, Archit Taneja <architt@codeaurora.org> wrote:
>> MDP5 has line count and frame count registers for each interface. Enable
>> these counters and use them to implement the get_vblank_timestamp drm
>> driver op.
>>
>> The line counter starts with the value 1 at the beginning of the VSYNC
>> pulse and ends with value VTOTAL at the end of VFP. This value is used
>> to determine whether we're in blanking period or not, and an adjusted
>> value of this counter is used to get vpos as expected by
>> get_scanout_position. Since there is no way to calculate hpos, we always
>> set it to 0.
>
> What are the odds that mdp(n!=5) could support the same? If/when that
> ever happens I could see making some of this helpers to duplicate a
> bit less in mdpN backend.. but I guess also fine to cross that bridge
> when we come to it. Other than that, lgtm, thanks
The MDP4 line counter only loops within the active region, making it
sort of ineffective. That's the main reason why I didn't attempt to
implement it for mdp4.
There seems to be a 12 bit frame counter available to implement a
vblank counter, but without the line counter, I'm not sure if that'll
be any better than using the software vblank counter.
Archit
>
> BR,
> -R
>
>> Signed-off-by: Archit Taneja <architt@codeaurora.org>
>> ---
>> drivers/gpu/drm/msm/mdp/mdp5/mdp5_encoder.c | 18 ++++
>> drivers/gpu/drm/msm/mdp/mdp5/mdp5_kms.c | 129 ++++++++++++++++++++++++++++
>> drivers/gpu/drm/msm/mdp/mdp5/mdp5_kms.h | 2 +
>> 3 files changed, 149 insertions(+)
>>
>> diff --git a/drivers/gpu/drm/msm/mdp/mdp5/mdp5_encoder.c b/drivers/gpu/drm/msm/mdp/mdp5/mdp5_encoder.c
>> index c9e32b0..a019656 100644
>> --- a/drivers/gpu/drm/msm/mdp/mdp5/mdp5_encoder.c
>> +++ b/drivers/gpu/drm/msm/mdp/mdp5/mdp5_encoder.c
>> @@ -293,6 +293,24 @@ static const struct drm_encoder_helper_funcs mdp5_encoder_helper_funcs = {
>> .enable = mdp5_encoder_enable,
>> };
>>
>> +int mdp5_encoder_get_linecount(struct drm_encoder *encoder)
>> +{
>> + struct mdp5_encoder *mdp5_encoder = to_mdp5_encoder(encoder);
>> + struct mdp5_kms *mdp5_kms = get_kms(encoder);
>> + int intf = mdp5_encoder->intf.num;
>> +
>> + return mdp5_read(mdp5_kms, REG_MDP5_INTF_LINE_COUNT(intf));
>> +}
>> +
>> +u32 mdp5_encoder_get_framecount(struct drm_encoder *encoder)
>> +{
>> + struct mdp5_encoder *mdp5_encoder = to_mdp5_encoder(encoder);
>> + struct mdp5_kms *mdp5_kms = get_kms(encoder);
>> + int intf = mdp5_encoder->intf.num;
>> +
>> + return mdp5_read(mdp5_kms, REG_MDP5_INTF_FRAME_COUNT(intf));
>> +}
>> +
>> int mdp5_encoder_set_split_display(struct drm_encoder *encoder,
>> struct drm_encoder *slave_encoder)
>> {
>> diff --git a/drivers/gpu/drm/msm/mdp/mdp5/mdp5_kms.c b/drivers/gpu/drm/msm/mdp/mdp5/mdp5_kms.c
>> index b532faa..e115318 100644
>> --- a/drivers/gpu/drm/msm/mdp/mdp5/mdp5_kms.c
>> +++ b/drivers/gpu/drm/msm/mdp/mdp5/mdp5_kms.c
>> @@ -468,6 +468,127 @@ static int get_clk(struct platform_device *pdev, struct clk **clkp,
>> return 0;
>> }
>>
>> +static struct drm_encoder *get_encoder_from_crtc(struct drm_crtc *crtc)
>> +{
>> + struct drm_device *dev = crtc->dev;
>> + struct drm_encoder *encoder;
>> +
>> + drm_for_each_encoder(encoder, dev)
>> + if (encoder->crtc == crtc)
>> + return encoder;
>> +
>> + return NULL;
>> +}
>> +
>> +static int mdp5_get_scanoutpos(struct drm_device *dev, unsigned int pipe,
>> + unsigned int flags, int *vpos, int *hpos,
>> + ktime_t *stime, ktime_t *etime,
>> + const struct drm_display_mode *mode)
>> +{
>> + struct msm_drm_private *priv = dev->dev_private;
>> + struct drm_crtc *crtc;
>> + struct drm_encoder *encoder;
>> + int line, vsw, vbp, vactive_start, vactive_end, vfp_end;
>> + int ret = 0;
>> +
>> + crtc = priv->crtcs[pipe];
>> + if (!crtc) {
>> + DRM_ERROR("Invalid crtc %d\n", pipe);
>> + return 0;
>> + }
>> +
>> + encoder = get_encoder_from_crtc(crtc);
>> + if (!encoder) {
>> + DRM_ERROR("no encoder found for crtc %d\n", pipe);
>> + return 0;
>> + }
>> +
>> + ret |= DRM_SCANOUTPOS_VALID | DRM_SCANOUTPOS_ACCURATE;
>> +
>> + vsw = mode->crtc_vsync_end - mode->crtc_vsync_start;
>> + vbp = mode->crtc_vtotal - mode->crtc_vsync_end;
>> +
>> + /*
>> + * the line counter is 1 at the start of the VSYNC pulse and VTOTAL at
>> + * the end of VFP. Translate the porch values relative to the line
>> + * counter positions.
>> + */
>> +
>> + vactive_start = vsw + vbp + 1;
>> +
>> + vactive_end = vactive_start + mode->crtc_vdisplay;
>> +
>> + /* last scan line before VSYNC */
>> + vfp_end = mode->crtc_vtotal;
>> +
>> + if (stime)
>> + *stime = ktime_get();
>> +
>> + line = mdp5_encoder_get_linecount(encoder);
>> +
>> + if (line < vactive_start) {
>> + line -= vactive_start;
>> + ret |= DRM_SCANOUTPOS_IN_VBLANK;
>> + } else if (line > vactive_end) {
>> + line = line - vfp_end - vactive_start;
>> + ret |= DRM_SCANOUTPOS_IN_VBLANK;
>> + } else {
>> + line -= vactive_start;
>> + }
>> +
>> + *vpos = line;
>> + *hpos = 0;
>> +
>> + if (etime)
>> + *etime = ktime_get();
>> +
>> + return ret;
>> +}
>> +
>> +static int mdp5_get_vblank_timestamp(struct drm_device *dev, unsigned int pipe,
>> + int *max_error,
>> + struct timeval *vblank_time,
>> + unsigned flags)
>> +{
>> + struct msm_drm_private *priv = dev->dev_private;
>> + struct drm_crtc *crtc;
>> +
>> + if (pipe < 0 || pipe >= priv->num_crtcs) {
>> + DRM_ERROR("Invalid crtc %d\n", pipe);
>> + return -EINVAL;
>> + }
>> +
>> + crtc = priv->crtcs[pipe];
>> + if (!crtc) {
>> + DRM_ERROR("Invalid crtc %d\n", pipe);
>> + return -EINVAL;
>> + }
>> +
>> + return drm_calc_vbltimestamp_from_scanoutpos(dev, pipe, max_error,
>> + vblank_time, flags,
>> + &crtc->mode);
>> +}
>> +
>> +static u32 mdp5_get_vblank_counter(struct drm_device *dev, unsigned int pipe)
>> +{
>> + struct msm_drm_private *priv = dev->dev_private;
>> + struct drm_crtc *crtc;
>> + struct drm_encoder *encoder;
>> +
>> + if (pipe < 0 || pipe >= priv->num_crtcs)
>> + return 0;
>> +
>> + crtc = priv->crtcs[pipe];
>> + if (!crtc)
>> + return 0;
>> +
>> + encoder = get_encoder_from_crtc(crtc);
>> + if (!encoder)
>> + return 0;
>> +
>> + return mdp5_encoder_get_framecount(encoder);
>> +}
>> +
>> struct msm_kms *mdp5_kms_init(struct drm_device *dev)
>> {
>> struct platform_device *pdev = dev->platformdev;
>> @@ -590,6 +711,8 @@ struct msm_kms *mdp5_kms_init(struct drm_device *dev)
>> !config->hw->intf.base[i])
>> continue;
>> mdp5_write(mdp5_kms, REG_MDP5_INTF_TIMING_ENGINE_EN(i), 0);
>> +
>> + mdp5_write(mdp5_kms, REG_MDP5_INTF_FRAME_LINE_COUNT_EN(i), 0x3);
>> }
>> mdp5_disable(mdp5_kms);
>> mdelay(16);
>> @@ -635,6 +758,12 @@ struct msm_kms *mdp5_kms_init(struct drm_device *dev)
>> dev->mode_config.max_width = config->hw->lm.max_width;
>> dev->mode_config.max_height = config->hw->lm.max_height;
>>
>> + dev->driver->get_vblank_timestamp = mdp5_get_vblank_timestamp;
>> + dev->driver->get_scanout_position = mdp5_get_scanoutpos;
>> + dev->driver->get_vblank_counter = mdp5_get_vblank_counter;
>> + dev->max_vblank_count = 0xffffffff;
>> + dev->vblank_disable_immediate = true;
>> +
>> return kms;
>>
>> fail:
>> diff --git a/drivers/gpu/drm/msm/mdp/mdp5/mdp5_kms.h b/drivers/gpu/drm/msm/mdp/mdp5/mdp5_kms.h
>> index 84f65d4..00730ba 100644
>> --- a/drivers/gpu/drm/msm/mdp/mdp5/mdp5_kms.h
>> +++ b/drivers/gpu/drm/msm/mdp/mdp5/mdp5_kms.h
>> @@ -222,6 +222,8 @@ struct drm_encoder *mdp5_encoder_init(struct drm_device *dev,
>> struct mdp5_interface *intf, struct mdp5_ctl *ctl);
>> int mdp5_encoder_set_split_display(struct drm_encoder *encoder,
>> struct drm_encoder *slave_encoder);
>> +int mdp5_encoder_get_linecount(struct drm_encoder *encoder);
>> +u32 mdp5_encoder_get_framecount(struct drm_encoder *encoder);
>>
>> #ifdef CONFIG_DRM_MSM_DSI
>> struct drm_encoder *mdp5_cmd_encoder_init(struct drm_device *dev,
>> --
>> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
>> hosted by The Linux Foundation
>>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora
Forum, hosted by The Linux Foundation
prev parent reply other threads:[~2015-10-27 5:16 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-10-26 9:54 [PATCH] drm/msm/mdp5: high precision vblank timestamp support Archit Taneja
2015-10-27 0:03 ` Rob Clark
2015-10-27 5:16 ` Archit Taneja [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=562F08A9.2060307@codeaurora.org \
--to=architt@codeaurora.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=robdclark@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).