Linux ARM-MSM sub-architecture
 help / color / mirror / Atom feed
From: Rajendra Nayak <rnayak@codeaurora.org>
To: Stephen Boyd <sboyd@codeaurora.org>,
	Mike Turquette <mturquette@baylibre.com>
Cc: linux-kernel@vger.kernel.org, linux-clk@vger.kernel.org,
	linux-arm-msm@vger.kernel.org,
	Rajendra Nayak <rnayak@codeaurora.com>
Subject: Re: [PATCH 0/5] Add support for MSM8996 clock controllers
Date: Wed, 18 Nov 2015 11:37:18 +0530	[thread overview]
Message-ID: <564C1596.9080406@codeaurora.org> (raw)
In-Reply-To: <1447808844-27049-1-git-send-email-sboyd@codeaurora.org>


On 11/18/2015 06:37 AM, Stephen Boyd wrote:
> These patches add support for the global and multimedia clock controllers
> found on MSM8996 devices. The first patch allows us to implement a
> "power of two" divider of different widths with a table based divider.
> The second patch adds support for Alpha PLLs and the 3rd and 5th patches
> add support for the two clock controllers. The fourth patch is
> a new type of clock ops for the graphics clock that does some custom
> ping-pong between different PLLs when switching graphics frequencies.
> 
> Some work is still pending, mostly adding GDSCs and configuring the

I have the GDSC support patches done on top. Will post once I 
get some reasonable testing done.

> multimedia PLLs for FSM voting mode vs. manually enabling and
> disabling them. So a v2 is probably going to come out after
> some more testing is done.
> 
> Cc: Rajendra Nayak <rnayak@codeaurora.com>
> 
> Stephen Boyd (5):
>   clk: divider: Cap table divider values to 'width' member
>   clk: qcom: Add Alpha PLL support
>   clk: qcom: Add MSM8996 Global Clock Control (GCC) driver
>   clk: qcom: Add gfx3d ping-pong PLL frequency switching
>   clk: qcom: Add MSM8996 Multimedia Clock Controller (MMCC) driver
> 
>  .../devicetree/bindings/clock/qcom,gcc.txt         |    1 +
>  .../devicetree/bindings/clock/qcom,mmcc.txt        |    1 +
>  drivers/clk/clk-divider.c                          |    9 +-
>  drivers/clk/qcom/Kconfig                           |   17 +
>  drivers/clk/qcom/Makefile                          |    3 +
>  drivers/clk/qcom/clk-alpha-pll.c                   |  355 +++
>  drivers/clk/qcom/clk-alpha-pll.h                   |   57 +
>  drivers/clk/qcom/clk-rcg.h                         |    1 +
>  drivers/clk/qcom/clk-rcg2.c                        |   87 +
>  drivers/clk/qcom/gcc-msm8996.c                     | 3332 ++++++++++++++++++++
>  drivers/clk/qcom/mmcc-msm8996.c                    | 3209 +++++++++++++++++++
>  include/dt-bindings/clock/qcom,gcc-msm8996.h       |  333 ++
>  include/dt-bindings/clock/qcom,mmcc-msm8996.h      |  285 ++
>  13 files changed, 7686 insertions(+), 4 deletions(-)
>  create mode 100644 drivers/clk/qcom/clk-alpha-pll.c
>  create mode 100644 drivers/clk/qcom/clk-alpha-pll.h
>  create mode 100644 drivers/clk/qcom/gcc-msm8996.c
>  create mode 100644 drivers/clk/qcom/mmcc-msm8996.c
>  create mode 100644 include/dt-bindings/clock/qcom,gcc-msm8996.h
>  create mode 100644 include/dt-bindings/clock/qcom,mmcc-msm8996.h
> 

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
hosted by The Linux Foundation

      parent reply	other threads:[~2015-11-18  6:07 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-11-18  1:07 [PATCH 0/5] Add support for MSM8996 clock controllers Stephen Boyd
2015-11-18  1:07 ` [PATCH 1/5] clk: divider: Cap table divider values to 'width' member Stephen Boyd
2015-11-18  1:07 ` [PATCH 2/5] clk: qcom: Add Alpha PLL support Stephen Boyd
2015-11-18  1:07 ` [PATCH 3/5] clk: qcom: Add MSM8996 Global Clock Control (GCC) driver Stephen Boyd
2015-11-18  1:07 ` [PATCH 4/5] clk: qcom: Add gfx3d ping-pong PLL frequency switching Stephen Boyd
2015-11-18  1:07 ` [PATCH 5/5] clk: qcom: Add MSM8996 Multimedia Clock Controller (MMCC) driver Stephen Boyd
2015-11-18 20:28   ` Stephen Boyd
2015-11-18  6:07 ` Rajendra Nayak [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=564C1596.9080406@codeaurora.org \
    --to=rnayak@codeaurora.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mturquette@baylibre.com \
    --cc=rnayak@codeaurora.com \
    --cc=sboyd@codeaurora.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox