From mboxrd@z Thu Jan 1 00:00:00 1970 From: Bryan Huntsman Subject: Re: [PATCH v2] arm64: dts: qcom: Add apq8096 dragonboard dts skeletons Date: Tue, 01 Dec 2015 13:29:42 -0800 Message-ID: <565E1146.7050207@codeaurora.org> References: <1448986275-16807-1-git-send-email-rnayak@codeaurora.org> Mime-Version: 1.0 Content-Type: text/plain; charset=windows-1252 Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <1448986275-16807-1-git-send-email-rnayak@codeaurora.org> Sender: linux-kernel-owner@vger.kernel.org To: Rajendra Nayak , agross@codeaurora.org Cc: linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org, linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, sboyd@codeaurora.org List-Id: linux-arm-msm@vger.kernel.org On 12/01/2015 08:11 AM, Rajendra Nayak wrote: > Add new dtsi and dts files for the apq8096 dragonboards with just > a serial device used as debug console > > While at it, also rearrange the Makefile so we have one dtb per line > so as to be consistent with whats done on other platforms. > > Signed-off-by: Rajendra Nayak > --- > arch/arm64/boot/dts/qcom/Makefile | 4 ++- > arch/arm64/boot/dts/qcom/apq8096-dragonboard.dts | 21 ++++++++++++++++ > arch/arm64/boot/dts/qcom/apq8096-dragonboard.dtsi | 30 +++++++++++++++++++++++ > 3 files changed, 54 insertions(+), 1 deletion(-) > create mode 100644 arch/arm64/boot/dts/qcom/apq8096-dragonboard.dts > create mode 100644 arch/arm64/boot/dts/qcom/apq8096-dragonboard.dtsi One problem. The board you have is not called a dragonboard. Let's check with the marketing folks on what they're calling it now. We need to explicitly avoid using dragonboard here as that name applies to a different class of products. Thanks. - Bryan -- Qualcomm Innovation Center, Inc. Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project