[PATCH] arm64: defconfig: Enable QDF2432 config options

[PATCH] arm64: defconfig: Enable QDF2432 config options

[Christopher Covington]

Now that ACPI is on in the defconfig, the time seems right to enable
drivers for the SD/MMC, DMA, and pin control hardware described in the ACPI
tables of the QDF2432 server platform.

Signed-off-by: Christopher Covington <cov@codeaurora.org>
---
 arch/arm64/configs/defconfig |  4 ++++
 scripts/patch-details.sh     | 21 ++++++++++++++++++---
 2 files changed, 22 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index fd2d74d..c138425 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -186,6 +186,7 @@ CONFIG_SPI_SPIDEV=m
 CONFIG_SPMI=y
 CONFIG_PINCTRL_SINGLE=y
 CONFIG_PINCTRL_MSM8916=y
+CONFIG_PINCTRL_QDF2XXX=m
 CONFIG_PINCTRL_QCOM_SPMI_PMIC=y
 CONFIG_GPIO_SYSFS=y
 CONFIG_GPIO_DWAPB=y
@@ -245,6 +246,7 @@ CONFIG_MMC=y
 CONFIG_MMC_BLOCK_MINORS=32
 CONFIG_MMC_ARMMMCI=y
 CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_ACPI=m
 CONFIG_MMC_SDHCI_PLTFM=y
 CONFIG_MMC_SDHCI_OF_ESDHC=y
 CONFIG_MMC_SDHCI_TEGRA=y
@@ -272,6 +274,8 @@ CONFIG_DMADEVICES=y
 CONFIG_PL330_DMA=y
 CONFIG_TEGRA20_APB_DMA=y
 CONFIG_QCOM_BAM_DMA=y
+CONFIG_QCOM_HIDMA_MGMT=m
+CONFIG_QCOM_HIDMA=m
 CONFIG_RCAR_DMAC=y
 CONFIG_VFIO=y
 CONFIG_VFIO_PCI=y
diff --git a/scripts/patch-details.sh b/scripts/patch-details.sh
index ec7d163..4069855 100755
--- a/scripts/patch-details.sh
+++ b/scripts/patch-details.sh
@@ -35,7 +35,7 @@ submaint() {
             N; s/THE REST,//; s/,THE REST//; s/\n/	/'
 }
 
-echo "URL	RPK Style Tag	Version	Checkpatch Errors	Checkpatch Warnings	Rebases	Builds	Last Updated	Author	Subject	File Updates	Lines Added	Lines Removed	Maintainer(s)	Subsystem(s)"
+echo "URL	RPK Style Tag	Version	Checkpatch Errors	Checkpatch Warnings	Rebases	Builds	Boots	Last Updated	Author	Subject	File Updates	Lines Added	Lines Removed	Maintainer(s)	Subsystem(s)"
 while read u; do
   echo -n "$u	"
   p=
@@ -121,12 +121,27 @@ while read u; do
     if $build; then
       if (make defconfig && make) &> buildlog; then
         echo -n 'yes	'
+        if [ "$QEMU" ]; then
+          timeout 10 \
+            $QEMU \
+            -nodefaults \
+            -nographic \
+            -M virt \
+            -cpu cortex-a57 \
+            -m 512 \
+            -serial stdio \
+            -kernel arch/arm64/boot/Image \
+            -append "debug earlycon=pl011,0x9000000 rdinit=/bin/busybox poweroff -f" \
+            -initrd ../fs/busybox64.cpio.gz
+        else
+          echo -n '	'
+        fi
       else
         git reset --hard HEAD~1 &> /dev/null
-        echo -n 'no	'
+        echo -n 'no		'
       fi
     else
-      echo -n '	'
+      echo -n '		'
     fi
     awk -f scripts/parsepatch.awk /tmp/patch.mbox || diffstat -s /tmp/patch.mbox | awk -f scripts/parsepatch.awk
     submaint /tmp/patch.mbox
-- 
Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project

Re: [PATCH] arm64: defconfig: Enable QDF2432 config options

[Timur Tabi]

Christopher Covington wrote:
>   arch/arm64/configs/defconfig |  4 ++++
>   scripts/patch-details.sh     | 21 ++++++++++++++++++---

I don't think these two files should be combined.

>  CONFIG_PINCTRL_SINGLE=y
>  CONFIG_PINCTRL_MSM8916=y
> +CONFIG_PINCTRL_QDF2XXX=m
>  CONFIG_PINCTRL_QCOM_SPMI_PMIC=y
>  CONFIG_GPIO_SYSFS=y
>  CONFIG_GPIO_DWAPB=y
> @@ -245,6 +246,7 @@ CONFIG_MMC=y
>  CONFIG_MMC_BLOCK_MINORS=32
>  CONFIG_MMC_ARMMMCI=y
>  CONFIG_MMC_SDHCI=y
> +CONFIG_MMC_SDHCI_ACPI=m
>  CONFIG_MMC_SDHCI_PLTFM=y

Why are these =m when all the others are =y?

-- 
Sent by an employee of the Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of the
Code Aurora Forum, hosted by The Linux Foundation.

Re: [PATCH] arm64: defconfig: Enable QDF2432 config options

[Christopher Covington]

On 07/01/2016 10:14 AM, Timur Tabi wrote:
> Christopher Covington wrote:
>>   arch/arm64/configs/defconfig |  4 ++++
>>   scripts/patch-details.sh     | 21 ++++++++++++++++++---
> 
> I don't think these two files should be combined.

Oops, sorry. Fixed in v2.

>>  CONFIG_PINCTRL_SINGLE=y
>>  CONFIG_PINCTRL_MSM8916=y
>> +CONFIG_PINCTRL_QDF2XXX=m
>>  CONFIG_PINCTRL_QCOM_SPMI_PMIC=y
>>  CONFIG_GPIO_SYSFS=y
>>  CONFIG_GPIO_DWAPB=y
>> @@ -245,6 +246,7 @@ CONFIG_MMC=y
>>  CONFIG_MMC_BLOCK_MINORS=32
>>  CONFIG_MMC_ARMMMCI=y
>>  CONFIG_MMC_SDHCI=y
>> +CONFIG_MMC_SDHCI_ACPI=m
>>  CONFIG_MMC_SDHCI_PLTFM=y
> 
> Why are these =m when all the others are =y?

Due to distribution differences [1][2], I see =y built-in as the default
on mobile platforms and =m modular as the default on server platforms.

But thinking about it, we could get a poweroff, reset, over-temperature,
or other interrupt before we get to the initramfs. So the pin controller
driver should be =y built-in.

One might make rootfs media =y built-in to make testing easier, but I
prefer to put my rootfs on SATA, as SD/MMC is much slower and smaller by
comparison.

Thanks,
Cov

Examples I found to spot check my recollection:
1.
https://github.com/CyanogenMod/android_kernel_lge_hammerhead/blob/cm-13.0/arch/arm/configs/cyanogenmod_hammerhead_defconfig

2.
https://git.centos.org/blob/sig-altarch!kernel.git/c3cb6cc6edb5400321fd9d83413add4cf61d942e/SOURCES!config-arm64
-- 
Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project

Re: [PATCH] arm64: defconfig: Enable QDF2432 config options

[Timur Tabi]

Christopher Covington wrote:
> Due to distribution differences [1][2], I see =y built-in as the default
> on mobile platforms and =m modular as the default on server platforms.

I don't think we should mix "server" defconfing entries with "mobile" 
defconfig entries.  It's a arm64 defconfig, neither server nor mobile. 
The other entries are =y, so these should be =y

No one uses this defconfig as-is for any platform.

> But thinking about it, we could get a poweroff, reset, over-temperature,
> or other interrupt before we get to the initramfs. So the pin controller
> driver should be =y built-in.
>
> One might make rootfs media =y built-in to make testing easier, but I
> prefer to put my rootfs on SATA, as SD/MMC is much slower and smaller by
> comparison.

Let's not overthink things, and just make *everything* =y by default.

-- 
Sent by an employee of the Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of the
Code Aurora Forum, hosted by The Linux Foundation.

Re: [PATCH] arm64: defconfig: Enable QDF2432 config options

[Andy Gross]

On Fri, Jul 01, 2016 at 10:11:00AM -0500, Timur Tabi wrote:
> Christopher Covington wrote:
> >Due to distribution differences [1][2], I see =y built-in as the default
> >on mobile platforms and =m modular as the default on server platforms.
> 
> I don't think we should mix "server" defconfing entries with "mobile"
> defconfig entries.  It's a arm64 defconfig, neither server nor mobile. The
> other entries are =y, so these should be =y
> 
> No one uses this defconfig as-is for any platform.
> 
> >But thinking about it, we could get a poweroff, reset, over-temperature,
> >or other interrupt before we get to the initramfs. So the pin controller
> >driver should be =y built-in.
> >
> >One might make rootfs media =y built-in to make testing easier, but I
> >prefer to put my rootfs on SATA, as SD/MMC is much slower and smaller by
> >comparison.
> 
> Let's not overthink things, and just make *everything* =y by default.

Do you guys want me to fix this up so it can hit this window?  I can just change
the m to y before I send it off.


Andy

Re: [PATCH] arm64: defconfig: Enable QDF2432 config options

[Timur Tabi]

Andy Gross wrote:
> Do you guys want me to fix this up so it can hit this window?  I can just change
> the m to y before I send it off.

Yes, please.

-- 
Qualcomm Datacenter Technologies, Inc. as an affiliate of Qualcomm
Technologies, Inc.  Qualcomm Technologies, Inc. is a member of the
Code Aurora Forum, a Linux Foundation Collaborative Project.

[PATCH v2] arm64: defconfig: Enable QDF2432 config options

[Christopher Covington]

Now that ACPI is on in the defconfig, the time seems right to enable
drivers for the SD/MMC, DMA, and pin control hardware described in the ACPI
tables of the QDF2432 server platform.

Signed-off-by: Christopher Covington <cov@codeaurora.org>
---
v2: Remove unrelated script changes.
---
 arch/arm64/configs/defconfig | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index fd2d74d..c138425 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -186,6 +186,7 @@ CONFIG_SPI_SPIDEV=m
 CONFIG_SPMI=y
 CONFIG_PINCTRL_SINGLE=y
 CONFIG_PINCTRL_MSM8916=y
+CONFIG_PINCTRL_QDF2XXX=m
 CONFIG_PINCTRL_QCOM_SPMI_PMIC=y
 CONFIG_GPIO_SYSFS=y
 CONFIG_GPIO_DWAPB=y
@@ -245,6 +246,7 @@ CONFIG_MMC=y
 CONFIG_MMC_BLOCK_MINORS=32
 CONFIG_MMC_ARMMMCI=y
 CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_ACPI=m
 CONFIG_MMC_SDHCI_PLTFM=y
 CONFIG_MMC_SDHCI_OF_ESDHC=y
 CONFIG_MMC_SDHCI_TEGRA=y
@@ -272,6 +274,8 @@ CONFIG_DMADEVICES=y
 CONFIG_PL330_DMA=y
 CONFIG_TEGRA20_APB_DMA=y
 CONFIG_QCOM_BAM_DMA=y
+CONFIG_QCOM_HIDMA_MGMT=m
+CONFIG_QCOM_HIDMA=m
 CONFIG_RCAR_DMAC=y
 CONFIG_VFIO=y
 CONFIG_VFIO_PCI=y
-- 
Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project