From mboxrd@z Thu Jan  1 00:00:00 1970
From: Marc Zyngier <marc.zyngier@arm.com>
Subject: Re: [PATCH v2] arm64: dts: qcom: Fix broken interrupt trigger
 settings
Date: Mon, 22 Aug 2016 11:23:49 +0100
Message-ID: <57BAD2B5.3030800@arm.com>
References: <1470937850-10492-1-git-send-email-marc.zyngier@arm.com>
Mime-Version: 1.0
Content-Type: text/plain; charset=windows-1252
Content-Transfer-Encoding: 7bit
Return-path: <linux-arm-msm-owner@vger.kernel.org>
Received: from foss.arm.com ([217.140.101.70]:50609 "EHLO foss.arm.com"
        rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP
        id S1753964AbcHVKXw (ORCPT <rfc822;linux-arm-msm@vger.kernel.org>);
        Mon, 22 Aug 2016 06:23:52 -0400
In-Reply-To: <1470937850-10492-1-git-send-email-marc.zyngier@arm.com>
Sender: linux-arm-msm-owner@vger.kernel.org
List-Id: linux-arm-msm@vger.kernel.org
To: Andy Gross <andy.gross@linaro.org>, David Brown <david.brown@linaro.org>
Cc: linux-arm-msm@vger.kernel.org, Stephen Boyd <sboyd@codeaurora.org>, linux-arm-kernel@lists.infradead.org, "Ivan T. Ivanov" <ivan.ivanov@linaro.org>

Hi Andy,

On 11/08/16 18:50, Marc Zyngier wrote:
> When a device uses the GIC as its interrupt controller and generates
> SPIs, only the values 1 (edge rising) and 4 (level high) are legal.
> 
> Anything else is just plain wrong (can't be programmed into the HW),
> and leads to aborted driver probes (USB doesn't work with 4.8-rc1
> on a Dragonboard 410C).
> 
> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
> ---
> * From v1:
>   - Fixed USB interrupts after review from Stephen

Any update on this?

Thanks,

	M.
-- 
Jazz is not dead. It just smells funny...