linux-arm-msm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Josh Cartwright <joshc@codeaurora.org>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Samuel Ortiz <sameo@linux.intel.com>,
	David Brown <davidb@codeaurora.org>,
	Daniel Walker <dwalker@fifo99.com>,
	Bryan Huntsman <bryanh@codeaurora.org>
Cc: linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-arm-msm@vger.kernel.org,
	Sagar Dharia <sdharia@codeaurora.org>,
	Gilad Avidov <gavidov@codeaurora.org>,
	Michael Bohan <mbohan@codeaurora.org>
Subject: [PATCH v3 08/10] mfd: pm8x41: add support for Qualcomm 8x41 PMICs
Date: Mon, 28 Oct 2013 13:12:35 -0500	[thread overview]
Message-ID: <5a49bffc44c5f5bffe222560e489a712321ce971.1382985169.git.joshc@codeaurora.org> (raw)
In-Reply-To: <cover.1382985169.git.joshc@codeaurora.org>

The Qualcomm 8941 and 8841 PMICs are components used with the Snapdragon
800 series SoC family.  This driver exists largely as a glue mfd component,
it exists to be an owner of an SPMI regmap for children devices
described in device tree.

Signed-off-by: Josh Cartwright <joshc@codeaurora.org>
---
 drivers/mfd/Kconfig  | 10 ++++++++
 drivers/mfd/Makefile |  1 +
 drivers/mfd/pm8x41.c | 64 ++++++++++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 75 insertions(+)
 create mode 100644 drivers/mfd/pm8x41.c

diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 914c3d1..0a288cb 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -476,6 +476,16 @@ config MFD_PM8XXX_IRQ
 	  This is required to use certain other PM 8xxx features, such as GPIO
 	  and MPP.
 
+config MFD_PM8X41
+	bool "Qualcomm PM8X41 PMIC"
+	depends on ARCH_MSM
+	select REGMAP_SPMI
+	help
+	  This enables basic support for the Qualcomm 8941 and 8841 PMICs.  These
+	  PMICs are currently used with the Snapdragon 800 series of SoCs.  Note, that
+	  this will only be useful paired with descriptions of the independent functions
+	  as children nodes in the device tree.
+
 config MFD_RDC321X
 	tristate "RDC R-321x southbridge"
 	select MFD_CORE
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 15b905c..ee4d338 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -149,6 +149,7 @@ obj-$(CONFIG_MFD_CS5535)	+= cs5535-mfd.o
 obj-$(CONFIG_MFD_OMAP_USB_HOST)	+= omap-usb-host.o omap-usb-tll.o
 obj-$(CONFIG_MFD_PM8921_CORE) 	+= pm8921-core.o ssbi.o
 obj-$(CONFIG_MFD_PM8XXX_IRQ) 	+= pm8xxx-irq.o
+obj-$(CONFIG_MFD_PM8X41)	+= pm8x41.o
 obj-$(CONFIG_TPS65911_COMPARATOR)	+= tps65911-comparator.o
 obj-$(CONFIG_MFD_TPS65090)	+= tps65090.o
 obj-$(CONFIG_MFD_AAT2870_CORE)	+= aat2870-core.o
diff --git a/drivers/mfd/pm8x41.c b/drivers/mfd/pm8x41.c
new file mode 100644
index 0000000..0a57221
--- /dev/null
+++ b/drivers/mfd/pm8x41.c
@@ -0,0 +1,64 @@
+/* Copyright (c) 2013, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/spmi.h>
+#include <linux/regmap.h>
+#include <linux/of_platform.h>
+
+static const struct regmap_config pm8x41_regmap_config = {
+	.reg_bits	= 16,
+	.val_bits	= 8,
+	.max_register	= 0xFFFF,
+};
+
+static int pm8x41_remove_child(struct device *dev, void *unused)
+{
+	platform_device_unregister(to_platform_device(dev));
+	return 0;
+}
+
+static int pm8x41_remove(struct spmi_device *sdev)
+{
+	device_for_each_child(&sdev->dev, NULL, pm8x41_remove_child);
+	return 0;
+}
+
+static int pm8x41_probe(struct spmi_device *sdev)
+{
+	struct regmap *regmap;
+
+	regmap = devm_regmap_init_spmi(sdev, &pm8x41_regmap_config);
+	if (IS_ERR(regmap)) {
+		dev_dbg(&sdev->dev, "regmap creation failed.\n");
+		return PTR_ERR(regmap);
+	}
+
+	return of_platform_populate(sdev->dev.of_node, NULL, NULL, &sdev->dev);
+}
+
+static struct of_device_id pm8x41_id_table[] = {
+	{ "qcom,pm8841", },
+	{ "qcom,pm8941", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, pm8x41_id_table);
+
+static struct spmi_driver pm8x41_driver = {
+	.probe	= pm8x41_probe,
+	.remove	= pm8x41_remove,
+	.driver	= {
+		.name		= "qpnp,pm8x41",
+		.of_match_table	= pm8x41_id_table,
+	},
+};
+module_spmi_driver(pm8x41_driver);
-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
hosted by The Linux Foundation

  parent reply	other threads:[~2013-10-28 18:12 UTC|newest]

Thread overview: 41+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-10-28 18:32 [PATCH v3 00/10] Add support for the System Power Management Interface (SPMI) Josh Cartwright
2013-10-28 18:12 ` [PATCH v3 01/10] of: Add empty for_each_available_child_of_node() macro definition Josh Cartwright
2013-10-29  5:50   ` Rob Herring
2013-10-28 18:12 ` [PATCH v3 02/10] spmi: Linux driver framework for SPMI Josh Cartwright
2013-10-29 15:02   ` Ivan T. Ivanov
2013-10-29 16:26     ` Josh Cartwright
2013-10-29 18:00       ` Ivan T. Ivanov
2013-10-29 15:21   ` Lars-Peter Clausen
2013-10-29 15:56     ` Josh Cartwright
2013-10-29 16:30       ` Stephen Boyd
2013-10-29 19:18         ` Lars-Peter Clausen
2013-10-29 19:26       ` Lars-Peter Clausen
2013-10-29 16:52   ` Stephen Boyd
2013-10-30 19:37     ` Josh Cartwright
2013-10-30 19:45       ` Stephen Boyd
2013-10-30  0:11   ` Russell King - ARM Linux
2013-10-28 18:12 ` [PATCH v3 05/10] spmi: pmic_arb: add support for interrupt handling Josh Cartwright
2013-10-30 18:17   ` Stephen Boyd
2013-10-30 19:10     ` Josh Cartwright
2013-10-28 18:12 ` [PATCH v3 07/10] regmap: add SPMI support Josh Cartwright
2013-10-28 20:01   ` Mark Brown
2013-10-28 18:12 ` [PATCH v3 04/10] spmi: Add MSM PMIC Arbiter SPMI controller Josh Cartwright
2013-10-30 18:05   ` Stephen Boyd
2013-10-30 19:17     ` Josh Cartwright
2013-10-28 18:12 ` [PATCH v3 10/10] rtc: pm8xxx: add support for pm8941 Josh Cartwright
2013-10-29 20:09   ` Stephen Boyd
2013-10-29 20:15     ` Greg Kroah-Hartman
2013-10-29 20:20       ` Stephen Boyd
2013-10-29 20:32         ` Greg Kroah-Hartman
2013-10-28 18:12 ` [PATCH v3 09/10] mfd: pm8x41: document device tree bindings Josh Cartwright
2013-10-29 14:18   ` Ivan T. Ivanov
2013-10-29 15:05     ` Josh Cartwright
2013-10-29 15:31       ` Ivan T. Ivanov
2013-10-28 18:12 ` Josh Cartwright [this message]
2013-10-29  0:40   ` [PATCH v3 08/10] mfd: pm8x41: add support for Qualcomm 8x41 PMICs Stephen Boyd
2013-10-29 15:56   ` Lee Jones
2013-10-29 16:03     ` Josh Cartwright
2013-10-28 18:12 ` [PATCH v3 03/10] spmi: add generic SPMI controller binding documentation Josh Cartwright
2013-10-28 18:12 ` [PATCH v3 06/10] spmi: document the PMIC arbiter SPMI bindings Josh Cartwright
2013-10-29 14:08   ` Ivan T. Ivanov
2013-10-29 15:12     ` Josh Cartwright

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=5a49bffc44c5f5bffe222560e489a712321ce971.1382985169.git.joshc@codeaurora.org \
    --to=joshc@codeaurora.org \
    --cc=bryanh@codeaurora.org \
    --cc=davidb@codeaurora.org \
    --cc=dwalker@fifo99.com \
    --cc=gavidov@codeaurora.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mbohan@codeaurora.org \
    --cc=sameo@linux.intel.com \
    --cc=sdharia@codeaurora.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).